[SOLVED] xfce upgrade 4.11 -- 4.12 : error loading libxfce4util.so.6
Hi guys,
I upgraded from xfce 4.11 (xfce4-*-devel packages) to xfce 4.12 today, but I have the following error with a bunch of different xfce4 apps (including xfdesktop):
# xfce4-settings-manager
xfce4-settings-manager: error while loading shared libraries: libxfce4util.so.6: cannot open shared object file: No such file or directory
I tried downgrading extra/libxfce4util 4.12.1-1 to aur/libxfce4util-devel 4.11.0-1 but then the error says libxfce4util.so.7 cannot be found.
Using ldd I found that the applications depend on both libxfce4util.so.6 and libxfce4util.so.7
ldd $(which xfce4-appfinder) | grep -i xfce4
libxfce4ui-1.so.0 => /usr/lib/libxfce4ui-1.so.0 (0x00007f681fa05000)
libxfce4util.so.7 => /usr/lib/libxfce4util.so.7 (0x00007f681ecd8000)
libxfce4util.so.6 => not found
I figure I have some package somewhere that didn't upgrade properly or something. Here's the list of xfce packages I have installed:
# pacman -Q | egrep xfce\|xfw\|xfd
elementary-xfce-icons 0.5-3
gtk-xfce-engine 2.10.1-1
libxfce4ui 4.12.0-1
libxfce4util 4.12.1-1
mint-backgrounds-xfce 2013.06.10-1
xfce4-appfinder 4.12.0-1
xfce4-artwork 0.1.1a_git20110420-4
xfce4-battery-plugin 1.0.5-4
xfce4-cpufreq-plugin 1.1.1-2
xfce4-cpugraph-plugin 1.0.5-3
xfce4-datetime-plugin 0.6.2-4
xfce4-diskperf-plugin 2.5.5-1
xfce4-fsguard-plugin 1.0.2-4
xfce4-genmon-plugin 3.4.0-3
xfce4-mpc-plugin 0.4.5-1
xfce4-netload-plugin 1.2.4-2
xfce4-panel 4.12.0-1
xfce4-sensors-plugin 1.2.6-2
xfce4-session 4.12.0-2
xfce4-settings 4.12.0-3
xfce4-smartbookmark-plugin 0.4.5-3
xfce4-systemload-plugin 1.1.2-2
xfce4-taskmanager 1.1.0-1
xfce4-terminal 0.6.3-2
xfce4-time-out-plugin 1.0.1-5
xfce4-timer-plugin 1.6.0-3
xfce4-wavelan-plugin 0.5.12-1
xfce4-weather-plugin 0.8.5-2
xfce4-xquisite-icon-theme 0.4.6-1
xfconf 4.12.0-1
xfdesktop 4.12.0-1
xfwm4 4.12.0-1
xfwm4-themes 4.10.0-2
zukitwo-colors-xfwm4 0.1-1
My current workaround, which seems sloppy but works just fine, was to create a symbolic link
sudo ln -s /usr/lib/libxfce4util.so.7 /usr/lib/libxfce4util.so.6
Any ideas?
Regards,
Walter
Last edited by rudametw (2015-03-10 17:24:46)
Output of pacman -Qm
acroread 9.5.5-5
adwaita-x-dark-and-light-theme 1.3-1
aircrack-m4-svn r18-2
airoscript-ng 1.2rc3-7
avbin7 7-1
bbswitch-dkms-git v0.8.r0.g0c38f97-1
bfg 1.11.8-2
blueman 1.99.alpha2-1
bmpanel2 2.1pre1-5
brainworkshop 4.8.4-4
bully-git 1.0.22.1fef73a-2
bumblebee-git 3.2.1.r16.524ded1-1
chromium-libpdf 1:36.0.1985.143-1
chromium-pepper-flash 1:16.0.0.305-1
compton-conf-git 17.18e83fe-1
compton-git 0.1_beta2.59.g23d1dd1-1
crunch 3.6-1
delorean-dark-stripped-themes-3.8 10082013-2
desksanity-git 1.0.rev59.4150edd-1
dorian-theme-3.10 105222014-2
dropbox-cli 2.10.0-4
dropbox-dark-panel-icons 1.0-10
e-modules-extra-git 20141224-1
eclipse-anyedittools 2.4.11.201409071702-1
eclipse-bytecode-outline 2.4.0-1
eclipse-emf 2.10.2-1
eclipse-findbugs 3.0.0-1
eclipse-gef 3.9.101-1
eclipse-jadclipse 3.3.0-3
eclipse-m2e 1.5.0-2
eclipse-mylyn 3.14.2-1
eclipse-pydev 3.9.2-1
eclipse-rse 3.5-2
eclipse-wtp-wst 3.6.0-1
econnman 1.1-1
edgar-git 0.2.0.r24.f36ea5a-1
efx-git 1.11.99.150.2ffc023-1
elementary-xfce-icons 0.5-3
elementary_test-git 1.12.99.10859.6eb6320-1
elementary_test-git-debug 1.12.99.10859.6eb6320-1
emprint-git 0.1.0.67.a0886e1-1
enventor-git 0.4.0.r37.gec28195-1
ephoto-git 0.1.1.528.26b2ecf-1
equate-git 0.99.0.18.703693f-1
ev-git r49.a4ac44f-1
ewe 0.2.2-1
eweather-git 0.2.0.r74.59b35ab-1
exifread 1.4.2-2
firefox-theme-adwaita 35.1-1
focuswriter 1.5.3-1
font-manager 0.5.7-5
fontconfig-ttf-ms-fonts 1.0-2
freemind-git 20121104-1
garcon-devel 0.3.0-5
gcc-gcj 4.9.2-2
gcc-gcj-ecj 4.9-1
gcolor3 1.2.1-1
gerix-wifi-cracker-ng-git 20111025-2
glib 1.2.10-12
gmrun-multihead 0.9.2-2
gnomintu-icon-theme-git r90.595c6d6r90.595c6d6-1
google-chrome-dev 42.0.2311.22-1
google-talkplugin 5.38.6.0-1
gstreamer0.10-vaapi 0.5.9-1
gtg 0.3.1-1
gtk-theme-adt 0.2-1
gtk-theme-e17gtk 20141022-1
gtk-theme-murrine-arch 0.4-2
gtk3-nocsd 20140823-2
https-everywhere-chrome 2014.1.3-1
humanity-icon-theme 0.6.5-1
indicator-stickynotes 0.4.2-1
johnny 1.1.3-1
jpegoptim 1.4.2-1
latex-mk 2.1-2
lib32-gtk-engine-murrine 0.98.2-1
lib32-libpng12 1.2.52-1
lib32-pangox-compat 0.0.2-1
libappindicator-gtk2 12.10.0-4
libappindicator-gtk3 12.10.0-4
libappindicator-sharp 12.10.0-4
libdbusmenu-gtk2 12.10.2-3
libeweather-git 0.2.0.78.7548063-1
libindicator-gtk2 12.10.1-4
libindicator-gtk3 12.10.1-4
libpng12 1.2.52-1
mdk3 v6-4
mint-backgrounds-xfce 2013.06.10-1
modelio-open 3.3.0-1
mozplugger 2.1.6-1
nemo-dropbox 2.4.0-2
nodejs-bower 1.3.12-1
nodejs-grunt-cli 0.1.13-3
numix-themes-darkblue 2.5-1
nvidia-dkms 346.47-2
nvidiabl 0.87-3
nvidiablctl 0.2-2
ob-autostart 1-3
obapps 0.1.7-4
obex-data-server 0.4.6-10
okular-browserplugin 20121015-1
omg-suite 20130525-1
pasystray-git 0.4.0.r47.gef3dbb0-1
pavumeter 0.9.3-6
pdflatex.sh-git 20120111-1
pdftk 2.02-3
perl-algorithm-permute 0.12-2
perl-expect 1.32-1
perl-number-range 0.12-1
pkgtools 25-4
popcorntime 0.3.7.2-1
powerstat-git 20140207-1
primus-git 20150223-1
profile-cleaner 2.34-1
pulseaudio-git v5.99.2.4.ge0e0ebb-1
pyqt3 3.18.1-14
pyrit 0.4.0-2
python-efl 1.13.0-1
python2-efl 1.13.0-1
python2-liblarch 2.1.0-4
python2-pypdf2 1.24-1
qscintilla-qt3 1.7.1-6
qt3 1:3.3.8b-9
rage-git 0.1.0.r78.9bd2dfb-1
rar 5.2.1-1
ravex-colors-gtk-theme 17.2-1
redshift-git 1.9.1.r91.g59023d8-1
redshift-gtk-git 1.9.1.r91.g59023d8-1
rofi-git r449.4c92d1f-1
screenclone-git 20130120-1
shimmer-wallpapers 1.0-2
siano-tv-fw 0.1-1
simpleswitcher-git 20140219-1
skippy-xd-git 46.ecb7835-1
smartgithg 6.0.7-2
stapler 0.4-2
superswitcher 0.6-4
tango-icon-theme 0.8.90-9
teamviewer 10.0.37742-1
thunderbird-lightning-bin 3.3-1
thunderbird-theme-adwaita 31.0-1
tomboy-calc 0.40-1
ttf-faruma-ib 2.0-1
ttf-ms-fonts 2.0-10
ttf-vista-fonts 1-8
tuned 2.3.0-1
vim-ag 20140327-1
virt-what 1.14-2
wepbuster 1.0_beta_0.7-6
wepcrackgui 0.9.2-1
wingo-git 20121022-2
wps-office 9.1.0.4945_a16p3-1
wpscrack 0.0.1-2
xf86-video-intel-git 2.99.917.151.gfef0f3d-1
xfce4-xquisite-icon-theme 0.4.6-1
xpdf 3.04-2
xwinmosaic-git v0.4.2.11.g378fffb-1
xz-git 5.2.0.r8.ga9b45ba-1
zen-gtk-themes 0.14.2-1
zenx-gtk-themes 0.11.5-1
zukitwo-colors-xfwm4 0.1-1
zukitwo-hybrid-theme 20111208-1
zukitwo-manjaro 33.9693d25-1
zukitwo-themes 20141022-1
Similar Messages
-
Xfce upgrade 4.11 -- 4.12 : error loading libxfce4util.so.6
Can I mark this UN[SOLVED] ? I'm having the exact same issue, having upgraded everything (right now) and did a reboot. This looks fishy to me:
~ » journalctl -r -n 200 --no-pager | grep xfdesktop | tail -n 1
Mar 23 10:27:45 apex slim[8763]: xfdesktop: error while loading shared libraries: libxfce4util.so.6: cannot open shared object file: No such file or directory
~ » pacman -Qs | grep xfdesktop
local/xfdesktop 4.12.1-1 (xfce4)
~ » ldd `which xfdesktop` | grep libxfce
libxfce4ui-1.so.0 => /usr/lib/libxfce4ui-1.so.0 (0x00007ff26e6ac000)
libxfce4util.so.7 => /usr/lib/libxfce4util.so.7 (0x00007ff26de04000)
libxfce4util.so.6 => not found
BTW xfce4-panel is having the same issue.
-- mod note: split from existing thread and moved to NC. Trilby --
Last edited by Trilby (2015-03-23 11:12:49)I know how AUR works, I do have some packages from AUR, I use aura to retrieve, build and install them. AFAIK pacman -Qm lists those packages. Can please be more verbose? I have no idea where are you heading with those questions and it makes less willing to answer them. xfdesktop and xfce4-panel (at least) are broken, and they are in Arch's extra repo, they're not from AUR. Here, look at this, I got the URL of the package from https://www.archlinux.org/packages/extr … xfdesktop/ (Download from mirror link)
~/Downloads » curl -O http://mirror.de.leaseweb.net/archlinux/extra/os/x86_64/xfdesktop-4.12.1-1-x86_64.pkg.tar.xz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 724k 100 724k 0 0 2064k 0 --:--:-- --:--:-- --:--:-- 2064k
~/Downloads » tar xf xfdesktop-4.12.1-1-x86_64.pkg.tar.xz
tar: Ignoring unknown extended header keyword 'SCHILY.fflags'
tar: Ignoring unknown extended header keyword 'SCHILY.fflags'
tar: Ignoring unknown extended header keyword 'SCHILY.fflags'
tar: Ignoring unknown extended header keyword 'SCHILY.fflags'
~/Downloads » ldd usr/bin/xfdesktop | grep libxfce
libxfce4ui-1.so.0 => /usr/lib/libxfce4ui-1.so.0 (0x00007f81f4893000)
libxfce4util.so.7 => /usr/lib/libxfce4util.so.7 (0x00007f81f3feb000)
libxfce4util.so.6 => not found -
[solved]After upgrading to [testing] , yaourt gives errors (permision)
(continued as far up as the terminal will scroll)
error:
error:
error:
error:
error:
error:
error:
picasa-beta-3.0_57.2401.0-2: description file is missing
picasa-beta-3.0_57.2401.0-2: dependency file is missing
picasa-beta-3.0_57.2401.0-2: file list is missing
flashplugin-10.0.d20.7-3: description file is missing
flashplugin-10.0.d20.7-3: dependency file is missing
flashplugin-10.0.d20.7-3: file list is missing
ttf-vista-fonts-1-2: description file is missing
ttf-vista-fonts-1-2: dependency file is missing
ttf-vista-fonts-1-2: file list is missing
Is what shows up after I install something with Yaourt. The weird thing is it only shows packages I've recently installed (flashplugin from [testin], picasa from AUR and the fonts from AUR). Doesn't make sense because I don't think it upgraded pacman or anything when I upgraded to [testing]. BTW everything still installs fine, just that's pretty annoying still.
EDIT: IN attempt to reinstall yaourt, I get this, potentially a permissions problem?
% makepkg
==> Making package: yaourt-git 20081119-1 x86_64 (Wed Nov 19 19:06:30 PST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Missing Dependencies:
-> error:
-> could
-> not
-> open
-> file
-> /var/lib/pacman/local/flashplugin-10.0.d20.7-3/depends:
-> Permission
-> denied
-> error:
-> could
-> not
-> open
-> file
-> /var/lib/pacman/local/picasa-beta-3.0_57.2401.0-2/depends:
-> Permission
-> denied
-> error:
-> could
-> not
-> open
-> file
-> /var/lib/pacman/local/ttf-vista-fonts-1-2/depends:
-> Permission
-> denied
-> git
==> ERROR: Could not resolve all dependencies.
austin@austin-desktop ~/Desktop/yaourt-git
I'll try root and see if it helps things out.
And no problems as root...why are the permissions defaulting to the wrong thing?
Also, every thing I try, pacman always sets the permissions wrong (tried as root, with youart, wihout it, with sudo, etc). I gotta run chmod -R 755 /usr/local/pacman/local every time to fix it, why isn't it setting it right by default?
EDIT: Looks like a bug to me, so I bugreported it http://bugs.archlinux.org/task/12187
Last edited by doorknob60 (2008-11-22 02:02:53)Boot with the failsafe image, which should have all possible modules included. All that needs to be done during this process is to load the modules needed to initiate the hard disk controller and then read from the filesystem.
Unfortunately, that is not what you're facing. It looks to me like hardware incompatibility, possibly the cpufreq module. Paste your lspci, rc.conf and mkinitcpio.conf and hope for further assistance. It will also be good if you could include the output of mkinitcpio -p kernel26 and mkinitcpio -vp kernel26 (pastebin this one; it'll be very long).
Last edited by schivmeister (2010-06-17 02:07:22) -
[Solved] After upgrading system/VIrtualbox kernels won't load
After running an update on my system and trying to use Virtualbox I recieve this:
============================================================
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.16.4-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
VBoxHeadless: Error -1908 in suplibOsInit!
VBoxHeadless: Kernel driver not installed
VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall VirtualBox.
============================================================
I have tried to reinstall virtualbox and the kernels, I've manually reloaded my kernel modules, and I still have no luck.
Does anyone have any ideas?
Last edited by cynicalpsycho (2014-10-25 20:19:22)Solution: Reboot system.... *Facepalm*
-
[SOLVED] Full upgrade + LVM = Error on boot
Arch64
Just ran a full upgrade ( -Syu).
/boot has it's own ext2 partition
/home /var etc are managed with LVM on the reminder of the disk
(there are 3 other disks that are mounted on different points under /home/user_name. They are not part of the LVM).
After upgrading, the LVM system will not load, What I'm getting after GRUB is :
:: Starting udev...
done
:: Running Hook [udev]
:: Triggering events,,,done.
Waiting 10 seconds for device /dev/mapper/VolGroup0-lvRoot ...
ERROR: device '/dev/mapper/VolGroup0-lvRoot' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/mapper/VolGroup0-lvRoot'.
Any ideas ?
Thanks
Ben
Last edited by ben-arch (2012-04-24 17:37:23)Well, up till this morning there WAS one off course a everything was booting OK.
Edit :
Problem is that I haven't added "lvm2" hook to mkinitcpio.conf.
Now that I have added it I understand that I have to run "mkinitcpio -p linux" in /boot to regenerate the kernel.
Problem is - how to do it ?
I've tried booting with Arch install media, then mounted my original /boot.
Entered it and ran "mkinitcpio -p linux"
What I'm getting is :
Preset linux does not exist. Exiting
And of course I can't mount my original root as it is inside the said LVM :-(
Ideas any1 ?
Thanks
Last edited by ben-arch (2012-04-24 16:50:47) -
App upgrade or download gives me error.
I have a Blackberry 8520 Curve, it worked fine for me for more than a year now.
But now everything sucks because no app works anymore after i download or upgrade.
I get a "App verify error" on all the apps i've upgraded and/or downloaded.
Firstly i recieved the upgrade for the facebook app, so i did the upgrade, and now, well, the icon doesnt exist on my phone, i tried everything, from device wipe to rebooting countless times..
Now for another eg. My whatsapp gives me the following message on screen after i click on it to open:
[ ERROR STARTING WHATSAPP:ERROR LOADING MODULE 'WHATSAPP' VERIFY ERROR. ]
(just right click and open in new tab if it doesn't show)
It does this with most of my apps.
How do i fix this? because installing and deleting and rebooting and even device wipe doesn't solve this..
PLZ HelpHello WurnMizter
Welcome to BlackBerry Support Community Forums
You may need to use JlCmder to wipe your device and then load a fresh OS 5 on your device.Have a look :How do I wipe the BlackBerry using Jl Cmder? . I hope it will help in overcoming your problem.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
[Solved] Error loading operating system (USB install, unetbootin)
Hi!
I was planning on reinstalling Arch on my netbook (Asus EEE T91MT), because I messed it up a bit too far.
It still boots fine and I can log in on the console, but I can not move the mouse in xserver/xfce, wifi stopped working, and I have various other problems and errors when running commands, so I figured a reinstall would be easier.
Now I followed the same steps as last time: put arch x86 netinstall on an empty 2GB FAT32 USB stick, using the Unetbootin tool.
But when I boot from USB (press escape during boot, select the USB drive instead of SSD, press enter), it just gives me a black screen with the text:
Error loading operating system
When I look on the USB stick, it looks very normal, like an arch install medium usually looks.
Thanks for any tips in advance!
Last edited by Feroxium (2012-10-17 14:24:45)Ah, thanks a lot!
I'll be more careful in trusting tools like unetbootin. It even clearly says on the website "arch up to 2010.05"...
Gonna try one of the alternative methods.
(editing topic title --> solved)
Last edited by Feroxium (2012-10-17 14:25:29) -
[solved] "failed command: WRITE FPDMA QUEUED" ATA errors
Hi!
Edit: Thinking about it, this could quite well be the famous "5184 hours" bug on micron SSDs. The 3624 seconds until failure basically scream for it being that issue. I'll do a firmware update after I have performed a backup and see if that helps.
Since shortly (I do not remember it to be linked to a kernel upgrade) I keep getting these error messages after a while, with the system freezing and usually not recovering:
[ 3624.763766] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
[ 3624.763777] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3624.763786] ata1.00: cmd 61/08:00:57:a1:14/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3624.763790] ata1.00: status: { DRDY }
[ 3624.764032] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3624.764035] ata1.00: cmd 61/08:f0:ff:80:46/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3624.764037] ata1.00: status: { DRDY }
[ 3624.764041] ata1: hard resetting link
[ 3630.100435] ata1: link is slow to respond, please be patient (ready=0)
[ 3634.796593] ata1: COMRESET failed (errno=-16)
[ 3634.796609] ata1: hard resetting link
[ 3640.133287] ata1: link is slow to respond, please be patient (ready=0)
[ 3644.829517] ata1: COMRESET failed (errno=-16)
[ 3644.829529] ata1: hard resetting link
[ 3650.166146] ata1: link is slow to respond, please be patient (ready=0)
[ 3679.894424] ata1: COMRESET failed (errno=-16)
[ 3679.894438] ata1: limiting SATA link speed to 1.5 Gbps
[ 3679.894443] ata1: hard resetting link
[ 3684.910856] ata1: COMRESET failed (errno=-16)
[ 3684.910871] ata1: reset failed, giving up
[ 3684.910875] ata1.00: disabled
[ 3684.910883] ata1.00: device reported invalid CHS sector 0
[ 3684.910888] ata1.00: device reported invalid CHS sector 0
[ 3684.910891] ata1.00: device reported invalid CHS sector 0
[ 3684.910969] ata1.00: device reported invalid CHS sector 0
[ 3684.910971] ata1.00: device reported invalid CHS sector 0
[ 3684.911077] ata1: EH complete
[ 3684.911110] sd 0:0:0:0: [sda] Unhandled error code
[ 3684.911113] sd 0:0:0:0: [sda]
[ 3684.911115] Result: hostbyte=0x04 driverbyte=0x00
[ 3684.911118] sd 0:0:0:0: [sda] CDB:
[ 3684.911120] cdb[0]=0x2a: 2a 00 00 46 80 ff 00 00 08 00
[ 3684.911129] end_request: I/O error, dev sda, sector 4620543
[ 3684.911134] Buffer I/O error on device sda1, logical block 577560
[ 3684.911143] EXT4-fs warning (device sda1): ext4_end_bio:286: I/O error writing to inode 1309793 (offset 5537792 size 4096 starting block 577568)
[ 3684.911161] sd 0:0:0:0: [sda] Unhandled error code
[ 3684.911163] sd 0:0:0:0: [sda]
[ 3684.911901] Buffer I/O error on device sda3, logical block 12682192
[ 3684.920707] systemd-journald[128]: Failed to write entry (20 items, 542 bytes), ignoring: Read-only file system
The computer is a thinkpad T410i, with this ATA controller:
» lspci |grep ATA
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
and this hard drive:
# smartctl -a /dev/sda |grep Model
Model Family: Crucial/Micron RealSSD m4/C400
Device Model: M4-CT128M4SSD2
Google and the error message suggest this is related to errors in the communication between the SATA controller and the hard drive. Usually things like "try another SATA cable" or "try a better power supply" are suggested, so I tried removing and re-inserting the drive into the slot; that didn't help though. What could I do now? I guess swapping the SATA cable or trying a better power supply is out of question
The disk itself seems fine to me, here's the SMART report:
# smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.6-2-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron RealSSD m4/C400
Device Model: M4-CT128M4SSD2
Serial Number: 000000001142031CDAA0
LU WWN Device Id: 5 00a075 1031cdaa0
Firmware Version: 0009
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Aug 20 02:16:50 2013 CEST
==> WARNING: This drive may hang after 5184 hours of power-on time:
http://www.tomshardware.com/news/Crucial-m4-Firmware-BSOD,14544.html
See the following web pages for firmware updates:
http://www.crucial.com/support/firmware.aspx
http://www.micron.com/products/solid-state-storage/client-ssd#software
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 595) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 6002
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 2557
170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
173 Wear_Leveling_Count 0x0033 098 098 010 Pre-fail Always - 73
174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 0
181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 4034 1449 2584
183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 82
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
202 Perc_Rated_Life_Used 0x0018 098 098 001 Old_age Offline - 2
206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5684 -
# 2 Short offline Completed without error 00% 5550 -
# 3 Short offline Completed without error 00% 3843 -
# 4 Extended offline Completed without error 00% 1835 -
# 5 Short offline Completed without error 00% 1319 -
# 6 Short offline Completed without error 00% 244 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Any ideas would be very much appreciated.
Cheers,
Sven
Last edited by scummos (2013-08-23 18:44:52)Looks like the firmware update solved it.
-
Hello,
I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears.
And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...!
NimrodThanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
[SOLVED] Xfce 4.12 desktop background problem
Hello everyone,
I have a problem with Xfce 4.12 desktop background. After pc rebooting I see distorted desktop background. If I change the desktop wallpaper, the background becomes normal. The same thing happens when reloading xfdesktop, the background becomes normal.
http://imgur.com/zFqgIrtl.png
Can you help me? Thank you in advance.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by black_fox (2015-04-29 20:43:36)Problem solved. Problem was with Linux kernel and Intel graphics card. On boot I was getting this error : [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
I downgraded kernel to version 3.14.6-1, now xfce desktop looks OK and no errors during boot. -
Undocumented problem solved with 16-bit pcmcia and irq error
I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe 1557 KB -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
[SOLVED] After upgrade gdm and Gnome don't work.
Hi,
after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
But now starting gdm with
# systemctl start gdm
only leads to a black screen with a cross shaped cursor I can move. Nothing more.
Xorg works -- I'm writing this post from KDE.
I reinstalled gnome and gnome-extra. Still no success.
System is up to date.
Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
/var/log/Xorg.0.log
[ 384.588]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 384.588] X Protocol Version 11, Revision 0
[ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 384.588] Build Date: 17 April 2013 02:37:06PM
[ 384.588]
[ 384.588] Current version of pixman: 0.30.0
[ 384.588] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
[ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 384.589] (==) No Layout section. Using the first Screen section.
[ 384.589] (==) No screen section available. Using defaults.
[ 384.589] (**) |-->Screen "Default Screen Section" (0)
[ 384.589] (**) | |-->Monitor "<default monitor>"
[ 384.590] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 384.590] (**) | |-->Device "Intel Graphics"
[ 384.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 384.590] (==) Automatically adding devices
[ 384.590] (==) Automatically enabling devices
[ 384.590] (==) Automatically adding GPU devices
[ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 384.590] Entry deleted from font path.
[ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 384.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 384.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 384.590] (II) Loader magic: 0x7fcc20
[ 384.590] (II) Module ABI versions:
[ 384.590] X.Org ANSI C Emulation: 0.4
[ 384.590] X.Org Video Driver: 14.1
[ 384.590] X.Org XInput driver : 19.1
[ 384.590] X.Org Server Extension : 7.0
[ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 384.594] Initializing built-in extension Generic Event Extension
[ 384.594] Initializing built-in extension SHAPE
[ 384.594] Initializing built-in extension MIT-SHM
[ 384.594] Initializing built-in extension XInputExtension
[ 384.594] Initializing built-in extension XTEST
[ 384.594] Initializing built-in extension BIG-REQUESTS
[ 384.594] Initializing built-in extension SYNC
[ 384.594] Initializing built-in extension XKEYBOARD
[ 384.594] Initializing built-in extension XC-MISC
[ 384.594] Initializing built-in extension SECURITY
[ 384.594] Initializing built-in extension XINERAMA
[ 384.594] Initializing built-in extension XFIXES
[ 384.594] Initializing built-in extension RENDER
[ 384.594] Initializing built-in extension RANDR
[ 384.594] Initializing built-in extension COMPOSITE
[ 384.594] Initializing built-in extension DAMAGE
[ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
[ 384.594] Initializing built-in extension DOUBLE-BUFFER
[ 384.594] Initializing built-in extension RECORD
[ 384.595] Initializing built-in extension DPMS
[ 384.595] Initializing built-in extension X-Resource
[ 384.595] Initializing built-in extension XVideo
[ 384.595] Initializing built-in extension XVideo-MotionCompensation
[ 384.595] Initializing built-in extension XFree86-VidModeExtension
[ 384.595] Initializing built-in extension XFree86-DGA
[ 384.595] Initializing built-in extension XFree86-DRI
[ 384.595] Initializing built-in extension DRI2
[ 384.595] (II) LoadModule: "glx"
[ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 384.595] (II) Module glx: vendor="X.Org Foundation"
[ 384.595] compiled for 1.14.1, module version = 1.0.0
[ 384.595] ABI class: X.Org Server Extension, version 7.0
[ 384.595] (==) AIGLX enabled
[ 384.596] Loading extension GLX
[ 384.596] (II) LoadModule: "intel"
[ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 384.596] (II) Module intel: vendor="X.Org Foundation"
[ 384.596] compiled for 1.14.1, module version = 2.21.9
[ 384.596] Module class: X.Org Video Driver
[ 384.596] ABI class: X.Org Video Driver, version 14.1
[ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 384.597] (++) using VT number 1
[ 384.602] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 384.602] (==) intel(0): RGB weight 888
[ 384.602] (==) intel(0): Default visual is TrueColor
[ 384.602] (**) intel(0): Option "AccelMethod" "sna"
[ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 384.603] (**) intel(0): Framebuffer tiled
[ 384.603] (**) intel(0): Pixmaps tiled
[ 384.603] (**) intel(0): "Tear free" disabled
[ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 384.604] (II) intel(0): Output eDP1 has no monitor section
[ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 384.605] (II) intel(0): Output VGA1 has no monitor section
[ 384.605] (II) intel(0): Output HDMI1 has no monitor section
[ 384.605] (II) intel(0): Output DP1 has no monitor section
[ 384.606] (II) intel(0): EDID for output eDP1
[ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
[ 384.606] (II) intel(0): Year: 2011 Week: 0
[ 384.606] (II) intel(0): EDID Version: 1.4
[ 384.606] (II) intel(0): Digital Display Input
[ 384.606] (II) intel(0): 8 bits per channel
[ 384.606] (II) intel(0): Digital interface is DisplayPort
[ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 384.606] (II) intel(0): Gamma: 2.20
[ 384.606] (II) intel(0): No DPMS capabilities specified
[ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 384.606] (II) intel(0): First detailed timing is preferred mode
[ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
[ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 384.606] (II) intel(0): Manufacturer's mask: 0
[ 384.606] (II) intel(0): Supported detailed timing:
[ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
[ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
[ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
[ 384.606] (II) intel(0): Unknown vendor-specific block f
[ 384.606] (II) intel(0): SAMSUNG
[ 384.606] (II) intel(0): LSN133KL018
[ 384.606] (II) intel(0): EDID (in hex):
[ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
[ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
[ 384.606] (II) intel(0): 22505400000001010101010101010101
[ 384.606] (II) intel(0): 010101010101382740c0608420303020
[ 384.606] (II) intel(0): 250025a5100000190000000f00000000
[ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
[ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
[ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
[ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 384.606] (II) intel(0): Printing probed modes for output eDP1
[ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 384.608] (II) intel(0): EDID for output VGA1
[ 384.608] (II) intel(0): EDID for output HDMI1
[ 384.608] (II) intel(0): EDID for output DP1
[ 384.608] (II) intel(0): Output eDP1 connected
[ 384.608] (II) intel(0): Output VGA1 disconnected
[ 384.608] (II) intel(0): Output HDMI1 disconnected
[ 384.608] (II) intel(0): Output DP1 disconnected
[ 384.608] (II) intel(0): Using exact sizes for initial modes
[ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 384.608] (==) intel(0): DPI set to (96, 96)
[ 384.608] (II) Loading sub module "dri2"
[ 384.608] (II) LoadModule: "dri2"
[ 384.608] (II) Module "dri2" already built-in
[ 384.608] (==) Depth 24 pixmap format is 32 bpp
[ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 384.608] (==) intel(0): Backing store disabled
[ 384.608] (==) intel(0): Silken mouse enabled
[ 384.608] (II) intel(0): HW Cursor enabled
[ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 386.414] (==) intel(0): DPMS enabled
[ 386.414] (II) intel(0): [DRI2] Setup complete
[ 386.414] (II) intel(0): [DRI2] DRI driver: i965
[ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
[ 386.414] (==) intel(0): hotplug detection: "enabled"
[ 386.415] (--) RandR disabled
[ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 386.430] (II) AIGLX: Loaded and initialized i965
[ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
[ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.508] (II) LoadModule: "evdev"
[ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 386.509] (II) Module evdev: vendor="X.Org Foundation"
[ 386.509] compiled for 1.14.0, module version = 2.8.0
[ 386.509] Module class: X.Org XInput Driver
[ 386.509] ABI class: X.Org XInput driver, version 19.1
[ 386.509] (II) Using input driver 'evdev' for 'Power Button'
[ 386.509] (**) Power Button: always reports core events
[ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.509] (--) evdev: Power Button: Found keys
[ 386.509] (II) evdev: Power Button: Configuring as keyboard
[ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 386.510] (**) Option "xkb_rules" "evdev"
[ 386.510] (**) Option "xkb_model" "evdev"
[ 386.510] (**) Option "xkb_layout" "de"
[ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
[ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
[ 386.535] (**) Video Bus: always reports core events
[ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 386.535] (--) evdev: Video Bus: Found keys
[ 386.535] (II) evdev: Video Bus: Configuring as keyboard
[ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
[ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 386.535] (**) Option "xkb_rules" "evdev"
[ 386.535] (**) Option "xkb_model" "evdev"
[ 386.535] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.536] (II) Using input driver 'evdev' for 'Power Button'
[ 386.536] (**) Power Button: always reports core events
[ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.536] (--) evdev: Power Button: Found keys
[ 386.536] (II) evdev: Power Button: Configuring as keyboard
[ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 386.536] (**) Option "xkb_rules" "evdev"
[ 386.536] (**) Option "xkb_model" "evdev"
[ 386.536] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 386.536] (II) No input driver specified, ignoring this device.
[ 386.536] (II) This device may have been added with another device file.
[ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 386.537] (II) No input driver specified, ignoring this device.
[ 386.537] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
[ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
[ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
[ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
[ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
[ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
[ 386.539] (**) Option "xkb_rules" "evdev"
[ 386.539] (**) Option "xkb_model" "evdev"
[ 386.539] (**) Option "xkb_layout" "de"
[ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
[ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 386.541] (**) Option "xkb_rules" "evdev"
[ 386.541] (**) Option "xkb_model" "evdev"
[ 386.541] (**) Option "xkb_layout" "de"
[ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
[ 386.542] (II) LoadModule: "synaptics"
[ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
[ 386.543] compiled for 1.14.1, module version = 1.7.1
[ 386.543] Module class: X.Org XInput Driver
[ 386.543] ABI class: X.Org XInput driver, version 19.1
[ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.543] (**) Option "Device" "/dev/input/event9"
[ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 386.564] (**) Option "TapButton1" "1"
[ 386.564] (**) Option "TapButton2" "2"
[ 386.564] (**) Option "TapButton3" "3"
[ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 386.573] (II) No input driver specified, ignoring this device.
[ 386.573] (II) This device may have been added with another device file.
[ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 386.899] (II) intel(0): Printing DDC gathered Modelines:
[ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.041] (II) intel(0): Printing DDC gathered Modelines:
[ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.069] (II) intel(0): Printing DDC gathered Modelines:
[ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 391.367] (II) intel(0): Printing DDC gathered Modelines:
[ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
and
/var/log/gdm/:0.log
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Intel Graphics"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 2.21.9
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
(++) using VT number 1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): "Tear free" disabled
(**) intel(0): Forcing per-crtc-pixmaps? no
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
(II) intel(0): Year: 2011 Week: 0
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
(II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LSN133KL018
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3463500000000
(II) intel(0): 00150104a51d10780209e59757548a27
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 010101010101382740c0608420303020
(II) intel(0): 250025a5100000190000000f00000000
(II) intel(0): 000000000028800a1e00000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c534e3133334b4c3031380a200003
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i965
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "system-keyboard"
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event10"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
(**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
(**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
(**) Webcam SC-13HDL11624N: always reports core events
(**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
(--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
(--) evdev: Webcam SC-13HDL11624N: Found keys
(II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
(II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.7.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by Duxon (2013-06-15 16:17:35)Finally managed fixed it.
libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
Likely that came with the recent pulseaudio upgrade. -
After upgrade to 4.1 from 3.2, admin logon page error with "done error load
Hello all,
Just upgraded 3.2 to 4.1. ran @apexins.sql sysaux sysaux temp /i/. Installation was successful and upgrade completed with no errors. When trying to log on to admin page, url changes to admin workarea but with IE we get "done error loading pages" and logon screen doesn't appear. All objects are compiled, accounts are unlocked and valid. Same thing happens when attempting to logon to the applicaiton. Any help would be appreciated. Open SR with oracle support, but no reply since yesterday.
inital url: https://xxxxxxxx.xxx.com:8443/pls/apex/apex_admin
ending url: https://xxxxxxxx.xxx.com:8443/pls/apex/f?p=4550:10:903647939084101
"done error loading pages"
Edited by: user12128153 on May 18, 2012 2:21 AMHi user12128153 (a real name would be nice),
a few questions for you.
Do you experience the same errors with firefox? If so install firebug (if you don't have it already) and see if the errors have to do with missing css etc.
What application server do you use, OHS/Apex Listener etc?
Kofi -
ECC 6 SR3 upgrade I am getting following error at RSVBCHCK
2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil
Maybe you are looking for
-
HT201210 The Iphone"Iphone" could not be restore. An unkowned error occured (-1)
I just replace this Iphone 7 months ago. Now I lockout and cannot restored. This error message ocurred everytime "The Iphone "Iphone" could not be restored. An unknowned error occured (-1)". The vendor (M1 singaopre) said this is a hardware problem.
-
Images in Finder vs Images in Iphoto
My computer is almost full and I have removed several thousand images from iPhoto to an external hard drive. However, my computer still shows that most of my space is taken up by image files. When I open Finder, the images section shows I have over 1
-
(urgent) SQL*Loader Large file support in O734
hi there, i have the following sqlloader error when trying to upload data file(s), each has size 10G - 20G to Oracle 734 DB on SunOS 5.6 . >> SQL*Loader-500: Unable to open file (..... /tstt.dat) SVR4 Error: 79: Value too large for defined data type
-
Some country native characters in AWT components
Hi All, I have problem with visualization some native characters on AWT components. For instance, when I put on the Frame some Labels components, then I can't see correct some special polish native characters, I can only see some boxes. It seems the
-
Adobe Reader,11.0.04, won't open PDF
I am using an iMac with v10.8.5. Adobe Reader v. 11.0.04 won't open any PDF's. I need help. Wayne