Sony Z5U.How to activate Interval Select button?

In Menu's Camera Set category, the Interval Rec button remains grayed out. How I can activate it?

Got it. Suspected that some menu option was on that prevented me from being able to activate Interval Recording. The culprit was that I had REC TYPE set to Progressive. INT REC doesn't like that. Switched to Interlace 60i and that activated INT REC. Who knew?

Similar Messages

How to remove multiple selections button in LDB selection screens

Hi Friends,
I am facing a problem while doing an HR object. I took an LDB with Selection screen '100'. i got the company code select-option in it. But i need to avoid multiple selection button so that i have to take only a single company code to print the ALV heading as the company Text. Please tell me quickly, how can i do it.
Regards,
Santosh.

You may have to do something like below where S_BUKRS is your company code select option of the LDB.
REPORT zakstest1 NO STANDARD PAGE HEADING.
TABLES t001.
TYPE-POOLS: sscr.
SELECT-OPTIONS s_bukrs FOR t001-bukrs.
INITIALIZATION.
*-- Remove the the ranges option
PERFORM remove_ranges_for_sel_options.
*&      Form remove_ranges_for_sel_options
*       text
FORM remove_ranges_for_sel_options.
DATA: optlist TYPE sscr_opt_list,
        restrict TYPE sscr_restrict,
        ***      TYPE sscr_***.
*-- Allow EQ only
CLEAR optlist.
optlist-name       = 'EQ_ONLY'.
optlist-options-eq = 'X'.
APPEND optlist TO restrict-opt_list_tab.
CLEAR ***.
***-kind    = 'S'.
***-sg_main = 'I'.
***-sg_addy = 'N'.
*-- Make S_BUKRS range to have only EQ
***-name    = 'S_BUKRS'.
***-op_main = 'EQ_ONLY'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
    EXPORTING
      restriction            = restrict
    EXCEPTIONS
      too_late               = 1
      repeated               = 2
      selopt_without_options = 3
      selopt_without_signs   = 4
      invalid_sign           = 5
      empty_option_list      = 6
      invalid_kind           = 7
      repeated_kind_a        = 8
      OTHERS                 = 9.
ENDFORM.                    " rem_ranges

LinkBar: how to set a selected button's background color?

I was able to set the text color of a selected LinkBar button by "disabledColor" style of LinkBar. Accordingly, I expect to set the background color of the selected button by "backgroundDisabledColor" style, however, it didn't work; and except "backgroundDisabledColor", I didn't see any other style that could possibly achieve this. Please help. Thanks.

Solved this myself by writing a programmatic skin and set it to LinkButton's disabledSkin.

How to activate 'AFS Details' Button in ME5A screen.

Hi Gurus,
This is related to AFS Material Management.
In my system the button called 'AFS Details' is missing on ME5A ( List display of Purchase Requisition) screen.
This button appeares when you run T.code ME5A after giving your selection parameter.
This button helps to show the quantity of material in Grid Level. But currently when I am executing after giving the selection parameters the button is not displayed, even from command line 'AFS Detail' is greyed out.
Can you please tell me which SPRO set up / other setting can bring back that button.
Thanks in advance
Amit Chakraborty

Hello Amit ,
Please try the following steps:
1) Go to transaction OLME.
2) Open Reporting -> Maintain Purchasing lists -> Scope of list.
3) Click on 'Define Scope of list'.
4) Select 'ALV' and click on Details button.
5) Select the 'AFS data' option, save and activate.
Best Regards,
Frank

ADF Faces : How to set the selection button in a managed bean

I am looking for a way to select the selection radio button of a specific row in a Table when using af:tableSelectOne.
I am using the tableModel to manage row but I did not find a way to select the row.

Have you implemented a CollectionModel?
If so, then you must know the rowKey of the item you want to select in the table.
simply bind the "selectionState" attribute of the <af:table> to point to your RowKeySet instance that has the rowKey of the item you want selected.

How to remove the select button from the alv grid

Hi,
I am using the Function modules for alv report,
My 1st field in the list is checkbox,
User can select the checkbox for further process.
My problem is I want to remove the standards select option from alv.
I have searched in slis_layout_alv for any option, but I could not.
Please help me.
Regards
Rajan

HI
Exclude process options from ALV
    PERFORM alv_excl. ( g_r_excl     TYPE ui_functions . )
FORM alv_excl.
APPEND cl_gui_alv_grid=>mc_mb_sum          TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_mb_subtot       TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_graph        TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_info         TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_print_back   TO g_r_excl.
ENDFORM.                    " alv_excl
CALL METHOD g_r_grid->set_table_for_first_display
          EXPORTING
            is_layout                     = g_r_layo
            is_variant                    = g_r_variant
            it_toolbar_excluding       = g_r_excl
            i_save                        = 'X'
          CHANGING
            it_outtab        = g_t_yetprint[]
            it_fieldcatalog = g_t_fieldcat.
Options appended in g_r_excl, will be excluded from ALV
Praveen

SURVEY - How to Activate Send Questionnaire Button To Get Survey Returned

Hello,
We have created surveys/questionnaires within SRM using SURVEY cockpit. We have success now getting Surveys to go to the email address BUT when we hit the SEND Questionnaire button, nothing happens when trying to reply.
I have located a few posts on this forum but none of them have been the answer to our problem.
Is this an ABAP object oriented class - ABAP-OO - that needs to be assigned via UBDS/UBDC?
If so, we are not sure the technical name for it . Would CL_MPA_HANDLE_ALERT_REPLY happen to be one that might work?
Any help would be immensely appreciated and points assigned.
Thank you very much,
Lynda

Thank you so much. That was exactly what we needed. One further question---->
If we want to retrieve the survey answers from a URL rather than email, where do we have to address the configuration? TCODES?
Also, we want to use the web application library to populate a drop list of vendors. Is that something you have had experience with?
If you, could you please help?
Sincerely,
Lynda Fuller

How to activate the select tool and enter drawing mode in pages

In pages 5.0 if you want a pure drawing document you have to turn off i.e. unclick Header, Footer, Document Body in the document setup and the arrow tool will replace the text curser tool. When you unclick document body you will get "are you sure" and say yes.
first choose a new blank document
click setup in the upper right corner
and uncheck the document body
and when the dialog box pops up choose remove
to avoid any header and footer issues also uncheck the header and footer
Now you basically have the Apple works old draw environment.

That is not necessary at all.
Just click away from all text and objects then select the Drawing tool from the Shapes icon.
It is actually one the distinct improvements in Pages 5 over Pages '09. Not perfect but a big step forwards.
Peter

How to Activate GOS button in HR transactions like po13,pp02,pp01 etc

Hi guys,
Can you please help, could you please give me so guyide lines on how to activate the GOS button in HR transactions like po13,pp01,pp02 etc. The GOS button is not visible at all in our system. I have rad various threads but they all assume that the button is visible. My requirement is activate it so that it becomes visble.
We would like to attach .doc.xls.pdf documents against various OM objects hence the need to activate the GOS button.
Thank you.
Andy

Hello Andy,
I found your post in another thread and I replied there. So I only add the link:
Attach PDF to position
Anyway I was wondering so far if you did selected any HR object in PO13 or PP01 to make sure taht GOS button doesn't appear? GOS button is shown only if you select an HR objects in those tcode. (cfr the link above for screenshot).
regards
Hadrien

Select Button goes into the Ipod!! How do you push it back out?

Hi, I was just wondering how to push the Select Button out if you accidentally pushed it too hard? Once my ipod froze and I got really mad and pushed the Select button a little too hard. Now, it is not on the same plane as the click wheel. Help.

Send it in for repair and hope you have not voided the warranty.

To activate total & subtotal button in ALV by class

Hi,
Kindly suggest how to activate total & subtotal button in ALV by class. I have used layout configuration by lvc_s_layo.
gs_layout type lvc_s_layo.
Ashutosh Kumar

Dears,
Do_SUM is not available in gs_layout type lvc_s_layo.
Its working only in function module REUSE_ALV_LIST_DISPLAY.
How to use in class ALV.
FORM SUB_CREATE_FIELDCATALOG .
THIS BELOW FIELD IS EDITABLE
PERFORM APPEND_FIELDCAT USING:'MATNR'
                              'Material No.'
                              'CHAR'
                              '30'
PERFORM APPEND_FIELDCAT USING:'MATKL'
                              'DOCUMENT TYPE'
                              'CHAR'
                              '10'
PERFORM APPEND_FIELDCAT USING:''
                              'CHAR'
                              '4'
                              'C610'
      PERFORM APPEND_FIELDCAT USING:'NTGEW'
                              'NET WT'
                              'P'
                              '10'
                              'C610'
                              'X'.
    PERFORM APPEND_FIELDCAT USING:'VOLTO'
                              'VOLUME'
                              'P'
                              '10'
                              'C610'
                              'X'.
     PERFORM APPEND_FIELDCAT USING:'VPREH'
                              'COST'
                              'P'
                              '10'
                              'C610'
ENDFORM.                    " SUB_CREATE_FIELDCATALOG
*&      FORM APPEND_FIELDCAT
      TEXT
     -->P_0116   TEXT
     -->P_0117   TEXT
     -->P_0118   TEXT
     -->P_0119   TEXT
     -->P_0120   TEXT
     -->P_10     TEXT
FORM APPEND_FIELDCAT USING    P_114
                               P_115
                               P_116
                               P_117
                               P_118
                               P_119.
CLEAR GT_FIELDCAT_LVC.
GT_FIELDCAT_LVC-FIELDNAME = P_114.
GT_FIELDCAT_LVC-COLTEXT = P_115.
GT_FIELDCAT_LVC-DATATYPE = P_116.
GT_FIELDCAT_LVC-OUTPUTLEN    = P_117.
GT_FIELDCAT_LVC-EMPHASIZE = P_118.
GT_FIELDCAT_LVC-do_sum = P_119.
   append gt_fieldcat_lvc.

How to activate hold button in MIGO ?

Dear all,
How to activate hold button in MIGO Screen ?
Jeyakanthan

Note 316931 - MIGO: 'Hold data' does not work
Summary
Symptom
The function 'Hold data' is not active in Transaction MIGO.
Additional key words
Enjoy
Cause and prerequisites
This is caused by a program error.
Solution
Set the attribute 'Hold data' in the Screen Painter (Transaction SE51) for program SAPLMIGO in all screens. Generate the screen after you made the change. The functions are then available.
You do not need to implement the changes manually if you import Support Packages.
A prerequisite is that Note 303091 exists in your system.
Manage held data
You can use this function to hold the data you are currently entering. No documents are posted.
To retrieve this data, choose "Goods receipt -> Held data". When retrieving the data, the held data is deleted from the overview tree.
If you want to delete held data that is no longer required from the overview tree, you can select this data with "Goods receipt -> Held data".
It is also possible to use held data as a reference for frequently recurring transactions, that will not be deleted after being called again.
Caution:
Some data cannot be held by the system and has to be re-entered after you try to retrieve it. This data includes:
Batch classification
Import data
Profitability segment
In Batch Classification, newly created selection criteria is lost if you do not post the document immediately.
Edited by: sudhansu satapathy on Mar 4, 2010 9:19 AM
Edited by: sudhansu satapathy on Mar 4, 2010 9:21 AM

Alarm sound button is greyed out in Iphone 5, can you please let me know how to activate it?

Under Alarm - Sound button is greyed out in Iphone 5, can you please let me know how to activate it?
I m not able to select other tones for the Alarm since it's greyed.
The phone literally hangs and I had to come out of the screen by pressing the home button.

Hi Mahendra KK,
If you are having issues such as you describe with your iPhone, I would suggest using the steps in this article to troubleshoot -
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Best,
Brett L

How to delete the selected rows in a JTable on pressing a button?

How to delete the selected rows in a JTable on pressing a button?

You are right. I did the same.
Following is the code where some of them might find it useful in future.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
}

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

Sony Z5U.How to activate Interval Select button?

Similar Messages

Maybe you are looking for