SORT DYNAMIC INTERNAL TABLE
Hello everybody.
How can I sort a dynamic internal table ???
The sentence sort <gt_table> by matnr werks doesn' t work... How can I do it ??
Thanks a lot.
Regards
Here is an example:
PARAMETERS dbtab TYPE c LENGTH 30.
SELECT-OPTIONS columns FOR dbtab NO INTERVALS.
DATA: otab TYPE abap_sortorder_tab,
oline TYPE abap_sortorder,
dref TYPE REF TO data.
FIELD-SYMBOLS: <column> LIKE LINE OF columns,
<itab> TYPE STANDARD TABLE.
TRY.
CREATE DATA dref TYPE STANDARD TABLE OF (dbtab).
***I have assigned the value dref to internal table as follows***
ASSIGN dref->* TO <itab>.
CATCH cx_sy_create_data_error.
MESSAGE 'Wrong data type!' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDTRY.
TRY.
SELECT *
FROM (dbtab)
INTO TABLE <itab>.
CATCH cx_sy_dynamic_osql_semantics.
MESSAGE 'Wrong database table!' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDTRY.
LOOP AT columns ASSIGNING <column>.
oline-name = <column>-low.
APPEND oline TO otab.
ENDLOOP.
TRY.
SORT <itab> BY (otab).
CATCH cx_sy_dyn_table_ill_comp_val.
MESSAGE 'Wrong column name!' TYPE 'I' DISPLAY LIKE 'E'.
LEAVE PROGRAM.
ENDTRY.
Similar Messages
-
At end of field, for dynamic internal table entries ?
Dear All,
I've data in my dynamic internal table.
But, to understand in a better way I created a test program with static entries.
Case 1 -->
DATA: BEGIN OF itab OCCURS 0,
year TYPE char4,
name TYPE char10,
END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
year TYPE char4,
name TYPE char10,
count TYPE i,
END OF itab2.
DATA: gv_count TYPE i,
gv_flag TYPE char1.
itab-name = 'AAAA'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAB'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAC'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAD'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBB'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBA'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBC'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBD'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCC'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCA'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCB'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCD'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCE'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCf'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDD'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDA'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDB'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDC'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDE'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
SORT itab BY year.
LOOP AT itab.
* Counter
gv_count = gv_count + 1.
AT END OF year.
itab2-count = gv_count.
MOVE-CORRESPONDING itab TO itab2.
APPEND itab2.
CLEAR gv_count.
WRITE:/ itab2-name,
itab2-year,
itab2-count.
CLEAR itab2.
CLEAR gv_flag.
ENDAT.
ENDLOOP.
Now for the above program the Output is :
Name Year Count
********** 2005 5
********** 2006 6
********** 2007 4
********** 2008 4
" Forget about the asterisk values as it's an example !
The above output is correct, But in my real case the table structure is not like the above .
The order of the field are in reverse.
i.e. The internal table is like this :
Case 2 -->
DATA: BEGIN OF itab OCCURS 0,
name TYPE char10,
year TYPE char4,
END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
name TYPE char10,
year TYPE char4,
count TYPE i,
END OF itab2.
In this case if I'm using at end of year the output is coming wrong.
Even on change of is also not working.
Request you guys to help me out so that I can achieve the same output as of case 1 with the table declaration as of CASE 2.
Regards,
Deepu.kHello Rich Heilman,
Again you came for my rescue ............
My code for this scenario is like this :
DATA: BEGIN OF itab OCCURS 0,
name TYPE char10,
year TYPE char4,
END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
name TYPE char10,
year TYPE char4,
count TYPE i,
END OF itab2.
DATA: gv_count TYPE i,
gv_flag TYPE char1.
itab-name = 'AAAA'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAB'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAC'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAD'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBB'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBA'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBC'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBD'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCC'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCA'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCB'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCD'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCE'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCf'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDD'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDA'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDB'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDC'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDE'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
SORT itab BY year.
LOOP AT itab.
* Counter
gv_count = gv_count + 1.
IF sy-tabix GT 1.
ON CHANGE OF itab-year.
itab2-count = gv_count.
MOVE-CORRESPONDING itab TO itab2.
APPEND itab2.
CLEAR gv_count.
WRITE:/ itab2-name,
itab2-year,
itab2-count.
CLEAR itab2.
CLEAR gv_flag.
ENDON.
ENDIF.
ENDLOOP.
The Output is :
DDDC 2005 2
CCCf 2006 4
BBBD 2007 6
AAAD 2008 4
The above output is wrong.
Can u correct me where I'm doing wrong ?
Regards,
Deepu.K -
How to populate field catalogue fields in ALV using dynamic internal table
Hi All,
Please let me know how to populate field catalogue fields in ALV using dynamic internal table.
I have created <dyn_table> using code below.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = g_t_ifc
it_fieldcatalog = g_t_fieldcat
IMPORTING
ep_table = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Now this <dyn_table> has fields like idoc no.,creation date ,
segment field 1, segment field 2 etc..Now idoc no.,creation date are static fields from table EDIDC. And segment field 1, segment field 2 etc are dynamic fields from table EDSAPPL.
In my ALV report I am getting the final layout properly but I am unable to move values to corresponding fields in the final layout shown.Please let me know how to populate these fields from different tables.
I tried this way but its not working.
SORT g_t_edid4 BY docnum.
LOOP AT g_t_edidc INTO g_r_edidc.
READ TABLE g_t_edid4 into g_r_edid4
WITH KEY docnum = g_r_edidc-docnum
BINARY SEARCH.
IF sy-subrc = 0.
<dyn_wa> = g_r_edid4-sdata.
MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
CLEAR g_r_edid4.
ENDIF.
MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.You have to assign each field to field symbol and then assign the value to that field symbol and asssign that field symbol to workarea field symbol.
LOOP AT g_t_edidc INTO g_r_edidc.
READ TABLE g_t_edid4 into g_r_edid4
WITH KEY docnum = g_r_edidc-docnum
BINARY SEARCH.
IF sy-subrc = 0.
ASSIGN COMPONENT 'SDATA' OF STRUCTURE <DYN_WA> TO <DYN_FLD>.
<DYN_FLD> = g_r_edid4-sdata.
" <dyn_wa> = g_r_edid4-sdata.
" Assign each fields like this.
" MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
CLEAR g_r_edid4.
ENDIF.
" MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.
Regards,
Naimesh Patel -
Passing Dynamic Internal Tables to Memory
I have a bit of a conundrum right now that I can't seem to correct. I am working on adding an ALV report to an existing report program. I was able to write a simple helper program that builds a custom object that I defined that translates my raw data into two seperate dynamic tables, and then builds an ALV grid and outputs it. The reason I wrote this in a simple helper program was so that I could use SUBMIT ... EXPORTING LIST TO MEMORY from my primary report program and capture the input so I can later write it out under our company's standard ABAP list format as if I were using WRITE statements.
The output of the report itself is working beautifully. We have included functionality to automatically take the output, produce an HTML file from it, and then FTP it directly to a webserver so our clients can get easy access to it. What I want to be able to do though is give the clients two tab-delimited files that contain the raw data that was used to build the report. We have an interface in place to do that, but I somehow need to be able to pass these two dynamic internal tables which I have field-symbols to reference back to my calling program.
Here is what I am trying to do:
CALL METHOD OBJ_ALV_MR_EST_REASONS->PRODUCE_ESTIMATION_REPORT
IMPORTING
RPT_DATA_BY_REASON = ref_it_estreason
RPT_DATA_BY_DISTRICT = ref_it_district.
* Assign the field symbols
ASSIGN ref_it_estreason->* TO <it_estreason>.
ASSIGN ref_it_district->* TO <it_district>.
* Export the two internal tables to memory so they can be
* retrieved by the calling program
EXPORT reason = <it_estreason>[]
district = <it_district>[]
TO MEMORY ID 'ZCR_ESTIMATION_REASON_RPT'.
As you can see, my method returns two references to dynamic internal tables. I have used the memory debugger to see that these tables are being correctly written to the ABAP memory.
However, back in my parent program when I try to do the following,
CREATE DATA ref_it_estreason TYPE REF TO DATA.
CREATE DATA ref_it_district TYPE REF TO DATA.
ASSIGN ref_it_estreason->* TO <it_estreason>.
ASSIGN ref_it_district->* TO <it_district>.
IMPORT reason = <it_estreason>
district = <it_district>
FROM MEMORY ID 'ZCR_ESTIMATION_REASON_RPT'.
I get the REFS_NOT_SUPPORTED_YET exception which says that "For the statement Export/Import ..." object references, interface references, and data references are currently not supported".
I have tried multiple other ways of defining my field-symbols or my reference pointers but they all result in exceptions of some sort. Is there any way for me to get this data passed back? It seems like there must be a way to get the data from memory since I know it's being correctly stored there.
Thanks in advance.Shortly after posting this, I had an idea which I was able to implement to actually get this to work.
I decided that I would simply pass the FIELDCAT tables for each of my dynamic tables into the same memory ID as the tables themselves.
EXPORT reason_fcat = it_estreason_fcat
district_fcat = it_district_fcat
reason = <it_estreason>[]
district = <it_district>[]
TO MEMORY ID 'ZCR_ESTIMATION_REASON_RPT'.
Then, back in my calling program I execute the following code. This retrieves the FIELDCAT tables, builds two empty dynamic table type reference variables and then lets me create field-symbols to reference those components.
* Retrieve the fieldcat internal tables first
IMPORT reason_fcat = it_estreason_fcat
district_fcat = it_district_fcat
FROM MEMORY ID 'ZCR_ESTIMATION_REASON_RPT'.
* Generate an internal table type assigned to each
* reference variable based on the fieldcat listings we
* retrieve
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_estreason_fcat
IMPORTING
ep_table = ref_it_estreason.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_district_fcat
IMPORTING
ep_table = ref_it_district.
* Assign the field symbols
ASSIGN ref_it_estreason->* TO <it_estreason>.
ASSIGN ref_it_district->* TO <it_district>.
CREATE DATA ref_wa_estreason LIKE LINE OF <it_estreason>.
CREATE DATA ref_wa_district LIKE LINE OF <it_district>.
ASSIGN ref_wa_estreason->* TO <wa_estreason>.
ASSIGN ref_wa_district->* TO <wa_district>.
* Finally, we can retrieve the data from memory and assign
* to the internal tables referenced by our field-symbols
IMPORT reason = <it_estreason>[]
district = <it_district>[]
FROM MEMORY ID 'ZCR_ESTIMATION_REASON_RPT'.
This worked beautifully and saved me from having to do a major redesign. I don't know how helpful it would be for ABAP Objects to be passed to memory (I believe some type of serialization would need to be in order there), but for dynamically typed internal tables it worked like a dream with little overhead. -
Filling dynamic internal table with data from other internal table
Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best RegardsHi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji -
Create dynamic internal table with dynamic structure
I have an internal table itab1 that have 12 amount fields from period1 thru period12. I need to create a dynamic table with dynamic structure for the period column if the total amount of each column is > 0. Any idea on how to do that?
For example if my itab1 has 20 rows and the sum of period1 = 35, sum of period2 = 0, sum of period3 = 5, sum of period4 =0, sum of period5 = 2 then I need to create a dynamic structure for the field column that have the total > 0, i.e structure struct1 have field period1, period3 and period5 only. Then I will need to load the data to itab2 from itab1. Can someone help.
Thanks. I am on 4.7 and will upgrade to ERP 6.0 soon.go throgh this....
REPORT yusmm_text1 NO STANDARD PAGE HEADING
LINE-SIZE 199.
T A B L E S
TABLES: MARA,
MAKT,
THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
SPRAS TYPE MAKT-SPRAS,
LTXT(2000) TYPE C ,
SRNO TYPE N ,
END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
SPRAS TYPE T002-SPRAS,
LAISO TYPE T002-LAISO,
SRNO TYPE N ,
END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
gv_lit TYPE I,
gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
gv_li1(3) TYPE N,
g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
T_NEWLINE TYPE REF TO DATA,
T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
T_FLDCAT TYPE LVC_T_FCAT,
WA_IT_FLDCAT TYPE LVC_S_FCAT,
WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
WA_COLNO(2) TYPE N,
WA_FLNAME(5) TYPE C,
L_LT TYPE SLIS_LAYOUT_ALV.
GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
"tablename
<FS_DYNTABLE>, "Field symbol to create work area
<FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA,
LI_FIELD_CAT TYPE LVC_T_FCAT,
LWA_FIELD_CAT TYPE LVC_S_FCAT.
PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
OBLIGATORY ,
S_MATNR FOR MARA-MATNR,
S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Material Number'.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Authorization Group'.
g_VAR11 = wg_final-srno + 2.
gv_li1 = gv_li1 + 2.
MOVE : g_var11 TO gv_i1.
ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'MatDesc'.
g_var2 = g_var11 + gv_lines.
ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'BasicData'.
APPEND <LWA_LINE_WA1> TO <FS_22>.
EXIT.
ENDLOOP.
LOOP AT ig_final INTO wg_final.
AT NEW matnr.
gv_index = sy-tabix.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-matnr.
ENDAT.
AT NEW MATNR.
GV_INDEX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-matnr.
ENDAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-begru.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-begru.
gv_var = wg_final-srno + 2.
gv_li = gv_li + 2.
MOVE : gv_var TO gv_i.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-maktx.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-maktx.
gv_var1 = gv_var + gv_lines .
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-ltxt.
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-ltxt.
AT END OF matnr.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
AT END OF matnr.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
from mara up to gp_size rows
appending corresponding fields of table ig_matnr
where matnr in s_matnr
and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
MARA~BEGRU
MARA~MTART
MAKT~SPRAS
MAKT~MAKTX FROM MARA INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
WHERE makt~spras IN s_spras
AND mara~matnr IN s_matnr
AND mara~mtart IN s_mtart
AND mara~matnr EQ ig_matnr-matnr.
endloop.
IF sy-subrc = 0.
SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
wg_final-MATNR = wg_mara_makt-MATNR.
wg_final-BEGRU = wg_mara_makt-BEGRU.
wg_final-MTART = wg_mara_makt-MTART.
wg_final-SPRAS = wg_mara_makt-SPRAS.
wg_final-MAKTX = wg_mara_makt-MAKTX.
READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
IF sy-subrc = 0.
wg_final-srno = wg_t002-srno.
ENDIF.
CLEAR ig_thead[].
ig_thead-TDOBJECT = 'MATERIAL'.
ig_thead-TDNAME = wg_final-matnr.
ig_thead-TDID = 'GRUN'.
ig_thead-TDSPRAS = wg_final-spras.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = IG_THEAD
I_READONLY = 'X'
IMPORTING
E_HEADER = IG_THEAD
TABLES
T_LINES = IG_TLINE[]
EXCEPTIONS
NOTFOUND = 1.
IF sy-subrc EQ 0.
LOOP AT ig_tline.
gv_strg = ig_tline-tdline.
IF gv_strg1 <> ' '.
CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
ELSE.
gv_strg1 = gv_strg.
ENDIF.
ENDLOOP.
wg_final-ltxt = gv_strg1.
APPEND wg_final TO ig_final.
CLEAR wg_final.
gv_strg1 = ' '.
ELSE.
APPEND wg_final TO ig_final.
ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
g_v = g_v + 1.
Wg_t002-srno = g_v.
MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'MD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'BD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Material-Text.xls'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
IMPORTING
FILELENGTH = GL_LENGHT
TABLES
DATA_TAB = <FS_22>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF GL_LENGHT NE 0.
MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
ENDIF.
ENDCASE.
ENDFORM. "user_command
Thanks -
Dynamic Internal Table with the same name
Hey Guys
I have a question.
I know that we can create dynamic internal table taking a struct dynamically.
But I have 2 ques on the same subject.
1. Can we create an internal table based on a type that we have locally declared eg
types: begin of ty_demo.
var1(1) type c,
var2 type p,
end of ty_demo.
2. If an internal table is already declared based on the above type say data: i_tab type standard table of ty_demo.
If i need to enhance the struct of this internal table. Can i do that by dynamically redefining it based on a different structure but keepin the same name i_tab.
In a nut shell I cannot change the name of my itab but I want to enhance the structure.
I Hope I am clear.
Help will be greatly apprcieated.
Thanks
Sameerhai.
we can create an internal table based on a type that we have locally declared, but you have to use data instead of types like.
data: begin of ty_demo.
var1(1) type c,
var2 type p,
end of ty_demo.
check the example notes for dynamic itab .
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
regards.
sowjanya.b -
Create object/structure like dynamic internal table
Hi,
We have created dynamic internal table with some fields.
for the above how to create structure or internal table like dynamic internal table structure .
Scenario: internal table itab1 ( with header line) have 5 fields.
Based on some of the conditions in layout of the report.
we have to create dynamic internal table.
field-symbols: <FS> type standard table.
we are able to create dynamic internal table with 3 fields
with assignment <fs> = itab1[]
the columns are not appearing but data appearing in next column.
how to solve this one
Thanks
RameshHi Ramesh,
I hope this code works...
report yup_alv_datbase .
*-Display Database table contents in ALV Grid Format
>********************************************************************
This report displays data from SAP tables, views (like SE16) *
FM : REUSE_ALV_GRID_DISPLAY *
tables:
dd02l, " SAP tables
dd03l. " Table Fields
type-pools: slis. " ALV Global Types
selection-screen :
begin of line, comment 1(35) v_1 for field p_table. "#EC NEEDED
parameters p_table like dd03l-tabname obligatory memory id dtb.
selection-screen end of line.
selection-screen :
begin of line, comment 1(35) v_2 for field p_max. "#EC NEEDED
parameters p_max(2) type n default '20' obligatory.
selection-screen end of line.
at selection-screen.
select single * from dd02l where tabname = p_table
and as4local = 'A'
and as4vers = '0000'.
if sy-subrc ne 0.
Table & is not active in the Dictionary
message e402(mo) with p_table.
elseif dd02l-tabclass = 'INTTAB'.
& is a structure, not a table
message e403(mo) with p_table.
endif.
initialization.
v_1 = 'Table'.
v_2 = 'Maximum of records'.
start-of-selection.
perform f_display_data.
Form F_DISPLAY_DATA
form f_display_data.
Macro definition
define m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
append ls_sort to lt_sort.
end-of-definition.
data:
l_long type i,
lp_struct type ref to data,
lp_table type ref to data, " Pointer to dynamic table
of_sdescr type ref to cl_abap_structdescr,
ls_lvc_cat type lvc_s_fcat,
lt_lvc_cat type lvc_t_fcat, " Field catalog
ls_fieldcat type slis_fieldcat_alv,
lt_fieldcat type slis_t_fieldcat_alv, " Field catalog
ls_layout type slis_layout_alv,
lt_sort type slis_t_sortinfo_alv, " Sort table
ls_sort type slis_sortinfo_alv.
field-symbols :
<fieldcat> type slis_fieldcat_alv,
<lt_data> type table, " Data to display
<fs> type any,
<components> type abap_compdescr.
Dynamic creation of a structure
create data lp_struct type (p_table).
assign lp_struct->* to <fs>.
Fields Structure
of_sdescr ?= cl_abap_typedescr=>describe_by_data( <fs> ).
loop at of_sdescr->components assigning <components>.
Field MANDT not displayed
if sy-tabix = 1 and <components>-name = 'MANDT'.
continue. " Next loop
endif.
Build Fieldcatalog
ls_lvc_cat-fieldname = <components>-name.
ls_lvc_cat-ref_table = p_table.
append ls_lvc_cat to lt_lvc_cat.
Build Fieldcatalog
ls_fieldcat-fieldname = <components>-name.
ls_fieldcat-ref_tabname = p_table.
append ls_fieldcat to lt_fieldcat.
endloop.
Create internal table
call method cl_alv_table_create=>create_dynamic_table
exporting it_fieldcatalog = lt_lvc_cat
importing ep_table = lp_table.
assign lp_table->* to <lt_data>.
Read data
select * from (p_table) up to p_max rows
into corresponding fields of table <lt_data>
order by primary key.
if <lt_data>[] is initial.
No table entries found for specified key
message i429(mo).
exit.
endif.
Read key field to Build Sort Table
select * from dd03l where tabname = p_table
and fieldname <> '.INCLUDE'
and as4vers = '0000'
and as4local = 'A'
order by position.
read table lt_fieldcat assigning <fieldcat>
with key fieldname = dd03l-fieldname.
check sy-subrc eq 0.
add dd03l-leng to l_long.
if dd03l-keyflag = 'X'.
Build Sort Table
m_sort dd03l-fieldname.
<fieldcat>-key = 'X'.
elseif l_long > 150.
<fieldcat>-tech = 'X'.
endif.
endselect.
ls_layout-zebra = 'X'.
ls_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
tables
t_outtab = <lt_data>.
endform. " F_DISPLAY_DATA
END OF PROGRAM Z_ALV_DYNAMIC_DATA *********************
Regards,
Sampath -
Hi Gurus,
I want to print sum of a particular coloumn in dynamic internal table,
But in Field symbold use char type so i cant able to print sum.
help me to solve this problem.
Regards,
Bhuvana.Hi
Herwith i attach my code.
*& Report ZFR133_TELECAST_REVENUE *
REPORT zfr133_telecast_revenue .
MODULE xxxxxxxx. *
Objective :.......................................... *
Program : Updates Tables ( ) Downloads data ( ) *
Outputs List ( ) *
Technical Spec No ............... *
Date Created 17/09/2008 *
Author J.Bhuvaneswari *
Location SUN TV / Chennai *
LDB ..... *
External Dependencies *
Amendment History *
Who Change ID Reason *
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ *
XXXXXXXXX AADDMMYYYY Where XXXX = Developers Name................. *
AA- Developers Initial ................................ *
Includes *
*INCLUDE : *
Tables *
TABLES : t001, bkpf, csks, bseg, cskt.
Types Begin with TY_ *
TYPES : BEGIN OF ty_bkpf,
bukrs LIKE bkpf-bukrs,
belnr LIKE bkpf-belnr,
gjahr LIKE bkpf-gjahr,
monat LIKE bkpf-monat,
stblg LIKE bkpf-stblg,
END OF ty_bkpf,
BEGIN OF ty_bseg,
bukrs LIKE bseg-bukrs,
gjahr LIKE bseg-gjahr,
belnr LIKE bseg-belnr,
shkzg LIKE bseg-shkzg,
dmbtr LIKE bseg-dmbtr,
kostl LIKE bseg-kostl,
hkont LIKE bseg-hkont,
END OF ty_bseg,
BEGIN OF ty_cskt,
kostl LIKE cskt-kostl,
ltext LIKE cskt-ltext,
END OF ty_cskt,
BEGIN OF ty_temp,
belnr LIKE bseg-belnr,
monat LIKE bkpf-monat,
kostl LIKE cskt-kostl,
ltext LIKE cskt-ltext,
shkzg LIKE bseg-shkzg,
dmbtr LIKE bseg-dmbtr,
END OF ty_temp.
DATA: BEGIN OF ty_stru OCCURS 0,
kostl LIKE cskt-kostl,
monat LIKE bkpf-monat,
dmbtr LIKE bseg-dmbtr,
END OF ty_stru.
Constants Begin with C_ *
*CONSTANTS: *
Data Begin with W_ *
DATA : w_amt LIKE bseg-dmbtr,
w_var TYPE string,
w_text TYPE string,
w_value TYPE i,
w_cnt TYPE i VALUE 1,
w_mon TYPE month,
okcode TYPE sy-ucomm.
Infotypes ( HR Module Specific) *
*INFOTYPES : *
Internal tables Begin with IT_ *
DATA : it_bkpf TYPE TABLE OF ty_bkpf,
it_bseg TYPE TABLE OF ty_bseg,
it_cskt TYPE TABLE OF ty_cskt,
it_temp TYPE TABLE OF ty_temp,
it_tmp1 TYPE TABLE OF ty_temp,
it_tmp2 TYPE TABLE OF ty_temp,
it_ccen TYPE TABLE OF ty_temp,
it_monat TYPE TABLE OF ty_temp.
DATA : xfc TYPE lvc_s_fcat,
ifc TYPE lvc_t_fcat,
ty_lay TYPE lvc_s_layo,
dy_table TYPE REF TO data,
dy_line TYPE REF TO data.
DATA : cl TYPE REF TO cl_gui_custom_container,
cl_alv TYPE REF TO cl_gui_alv_grid.
DATA : wa_bkpf TYPE ty_bkpf,
wa_bseg TYPE ty_bseg,
wa_cskt TYPE ty_cskt,
wa_temp TYPE ty_temp,
wa_tmp1 TYPE ty_temp,
wa_tmp2 TYPE ty_temp,
wa_ccen TYPE ty_temp,
wa_monat TYPE ty_temp,
wa_month TYPE t247.
Field Symbols Begin with FS_ *
*FIELD-SYMBOLS: *
FIELD-SYMBOLS: .
Insert *
*INSERT : *
Select Options Begin with SO_ *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS : pr_bukrs LIKE t001-bukrs OBLIGATORY,
pr_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECT-OPTIONS : so_monat FOR bkpf-monat OBLIGATORY,
so_kostl FOR bseg-kostl OBLIGATORY,
so_hkont FOR bseg-hkont OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
Parameters Begin with PR_ *
*PARAMETERS : *
Initialisation *
*INITIALIZATION.
At selection-screen *
*AT SELECTION-SCREEN.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
******Select data from Header Table.
SELECT bukrs gjahr belnr monat stblg
FROM bkpf INTO CORRESPONDING FIELDS OF TABLE it_bkpf
WHERE bukrs = pr_bukrs AND
gjahr = pr_gjahr AND
monat IN so_monat AND
stblg = ' '.
******Select data from Item Table
IF it_bkpf IS NOT INITIAL.
SELECT bukrs gjahr belnr shkzg dmbtr kostl hkont
FROM bseg INTO CORRESPONDING FIELDS OF TABLE it_bseg
FOR ALL ENTRIES IN it_bkpf
WHERE bukrs = it_bkpf-bukrs AND
gjahr = it_bkpf-gjahr AND
belnr = it_bkpf-belnr AND
kostl IN so_kostl AND
hkont IN so_hkont.
ENDIF.
******Select Cost center text
SELECT kostl ltext
FROM cskt INTO CORRESPONDING FIELDS OF TABLE it_cskt
WHERE spras = 'EN' AND
kokrs = 'SUN1' AND
kostl IN so_kostl.
******Append data in temporary table.
LOOP AT it_bseg INTO wa_bseg.
READ TABLE it_bkpf INTO wa_bkpf WITH KEY belnr = wa_bseg-belnr.
IF sy-subrc = 0.
wa_temp-belnr = wa_bkpf-belnr.
wa_temp-monat = wa_bkpf-monat.
wa_temp-kostl = wa_bseg-kostl.
READ TABLE it_cskt INTO wa_cskt WITH KEY kostl = wa_bseg-kostl.
IF sy-subrc = 0.
wa_temp-ltext = wa_cskt-ltext.
ENDIF.
IF wa_bseg-shkzg = 'H'.
wa_temp-dmbtr = wa_bseg-dmbtr * -1.
ELSE.
wa_temp-dmbtr = wa_bseg-dmbtr.
ENDIF.
APPEND wa_temp TO it_temp.
ENDIF.
ENDLOOP.
SORT it_temp BY kostl monat.
******Internal Table of cost center without duplications.
it_ccen = it_temp.
DELETE ADJACENT DUPLICATES FROM it_ccen COMPARING kostl.
******Internal Table of fiscal period without duplications.
it_monat = it_temp.
SORT it_monat BY monat.
DELETE ADJACENT DUPLICATES FROM it_monat COMPARING monat.
PERFORM dynamic_table.
PERFORM data_upload_dynamic_table.
SET SCREEN 3000.
IF cl IS INITIAL.
CREATE OBJECT cl EXPORTING container_name = 'TC'.
CREATE OBJECT cl_alv EXPORTING i_parent = cl.
ENDIF.
CALL METHOD cl_alv->set_table_for_first_display
EXPORTING
i_structure_name = 'ZALIKP'
is_layout = ty_lay
CHANGING
it_outtab =
it_fieldcatalog = ifc.
*GET XX.
*END-OF-SELECTION.
E N D O F S E L E C T I O N *
At line selection *
*AT LINE-SELECTION.
User Command Processing *
*AT USER-COMMAND.
Top Of Page *
*TOP-OF-PAGE.
End Of Page *
*END-OF-PAGE.
*& Form DYNAMIC_TABLE
FORM dynamic_table .
PERFORM design_fieldcat USING 'KOSTL' 'BSEG' text-002 '10'.
PERFORM design_fieldcat USING 'LTEXT' 'CSKT' text-003 '30'.
LOOP AT it_monat INTO wa_monat.
CONCATENATE 'PE' wa_monat-monat INTO w_text.
w_mon = wa_monat-monat.
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = sy-langu
month = w_mon
IMPORTING
t247 = wa_month.
w_var = wa_monat-monat.
w_text = wa_month-ltx.
PERFORM design_fieldcat USING w_var 'BKPF' w_text '10'.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = ifc
IMPORTING
ep_table = dy_table.
ASSIGN dy_table->* TO .
ENDFORM. " DYNAMIC_TABLE
*& Form DESIGN_FIELDCAT
FORM design_fieldcat USING value TYPE string
tab TYPE string
text TYPE string
length TYPE string.
xfc-fieldname = value.
xfc-tabname = tab.
xfc-reptext = text.
xfc-outputlen = length.
APPEND xfc TO ifc.
w_cnt = w_cnt + 1.
CLEAR xfc.
ENDFORM. " DESIGN_FIELDCAT
*& Form DATA_UPLOAD_DYNAMIC_TABLE
FORM data_upload_dynamic_table .
DATA : w_c(2) TYPE c,
w_c1(5) TYPE c,
w_c2(5) TYPE c.
CREATE DATA dy_line LIKE LINE OF .
CLEAR: wa_tmp2,w_amt.
ENDON.
ENDLOOP.
ENDLOOP.
ENDFORM. " DATA_UPLOAD_DYNAMIC_TABLE
*& Module STATUS_3000 OUTPUT
MODULE status_3000 OUTPUT.
SET PF-STATUS 'MENU'.
SET TITLEBAR 'TIT'.
ENDMODULE. " STATUS_3000 OUTPUT
*& Module USER_COMMAND_3000 INPUT
MODULE user_command_3000 INPUT.
CASE okcode.
WHEN 'BACK'." OR 'RW' OR '%EX'.
LEAVE PROGRAM.
CLEAR okcode.
ENDCASE.
ENDMODULE. " USER_COMMAND_3000 INPUT -
Popualting data into dynamic internal table
Hi all,
I am working on Dynamic internal tables.I have created the structure of internal table but i am unable to populate data into it.Though i have seen some of the forums but those didn't help me. please provide me the solution. Here is my code what i did.I have the data in itab and itab1.
My requirement is meinh fileds are dynamic.thie meinh and umren are two fileds in mvke table.for one record ihave to populate umren value for that particular meinh value.Pls help me.
mtart vkorg werks mtanr Meinh(kg) Meinh(gl)
fert 0353 0303 3231 Umren value Umren value
REPORT z123.
T Y P E - P O O L S
TYPE-POOLS :slis,abap.
T A B L E S
*Tables
TABLES: mara,marm,mvke,marc.
F I E L D - S Y M B O L S
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> ,
<dyn_field>.
I N T E R N A L T A B L E S
Internal Tables declaration for ALV GRID/LIST
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "FIELD CATALOG LIST
tb_uom_cat TYPE slis_t_fieldcat_alv, "FIELD CATALOG
ls_fieldcat1 TYPE lvc_s_fcat,
tb_dy_cat TYPE lvc_t_fcat, "FIELD CATALOG
tb_outputcat TYPE slis_t_fieldcat_alv,
tb_events TYPE slis_t_event,
ref_grid TYPE REF TO cl_gui_alv_grid,
t_events LIKE LINE OF tb_events.
DATA: BEGIN OF itab OCCURS 0,
mtart LIKE mara-mtart,
vkorg LIKE mvke-vkorg,
werks LIKE marc-werks,
matnr TYPE mara-matnr,
END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
matnr TYPE marm-matnr,
umren TYPE marm-umren,
meinh TYPE marm-meinh,
END OF itab1.
V A R I A B L E S
Global Variables
DATA: g_repid LIKE sy-repid. "Report ID
DATA: dy_table TYPE REF TO data,
dy_line TYPE REF TO data.
S E L E C T I O N S C R E E N
For User Input(Selection Criteria)
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECT-OPTIONS :
s_mtart FOR mara-mtart OBLIGATORY, " Material type
s_vkorg FOR mvke-vkorg OBLIGATORY, " Sales Organization
s_plant FOR marc-werks, " Plant
s_meinh FOR marm-meinh. " Unit of Measure
SELECTION-SCREEN END OF BLOCK b0.
I N I T I A L I Z A T I O N
INITIALIZATION.
Program ID
g_repid = sy-repid. " Prog ID
A T S E L E C T I O N - S C R E E N
AT SELECTION-SCREEN.
Validate Material Type
PERFORM check_mtart.
Validate Sales Organization
PERFORM check_vkorg.
Validate Plant
PERFORM check_werks.
Validate Unit of Measure (UOM)
PERFORM check_meinh.
S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
Get Data
PERFORM get_data.
FIELD CATALOG FOR ALV
PERFORM fill_field_catalog_uom USING tb_uom_cat.
FIELD CATALOG FOR CREATING DYNAMIC INTERNAL TABLE
PERFORM fill_field_catalog_dy USING tb_dy_cat.
CREATING DYNAMIC INTERNAL TABLE
PERFORM dy_tab_create.
End of selection *
F O R M S
*& Form CHECK_MTART
Validate Material Type
FORM check_mtart .
Material Type
DATA :l_mtart LIKE t134-mtart.
CHECK NOT s_mtart IS INITIAL.
SELECT mtart UP TO 1 ROWS
INTO l_mtart
FROM t134
WHERE mtart IN s_mtart.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e899(mm) WITH 'Invalid Material Type'(002).
ENDIF.
ENDFORM. " CHECK_MTART
*& Form CHECK_VKORG
Validate Sales Organization
FORM check_vkorg .
Sales Oraganization
DATA :l_vkorg LIKE tvko-vkorg.
CHECK NOT s_vkorg IS INITIAL.
SELECT vkorg UP TO 1 ROWS
INTO l_vkorg
FROM tvko
WHERE vkorg IN s_vkorg.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e899(mm) WITH 'Invalid Sales Organization'(003).
ENDIF.
ENDFORM. " CHECK_VKORG
*& Form CHECK_WERKS
Validate Plant
FORM check_werks .
Plant
DATA :l_werks LIKE t001w-werks.
CHECK NOT s_plant IS INITIAL.
SELECT werks UP TO 1 ROWS
INTO l_werks
FROM t001w
WHERE werks IN s_plant.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e899(mm) WITH 'Invalid Plant'(004).
ENDIF.
ENDFORM. " CHECK_WERKS
*& Form CHECK_MEINH
Validate Unit of Measure (UOM)
FORM check_meinh .
Unit of Measure (UOM)
DATA :l_meinh LIKE t006-msehi.
CHECK NOT s_meinh IS INITIAL.
SELECT msehi UP TO 1 ROWS
INTO l_meinh
FROM t006
WHERE msehi IN s_meinh.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e899(mm) WITH 'Invalid Unit of Measure'(005).
ENDIF.
ENDFORM. " CHECK_MEINH
*& Form FILL_FIELD_CATALOG_UOM
text
FIELD CATALOG FOR ALV
FORM fill_field_catalog_uom USING l_fieldcat TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF l_itab OCCURS 0,
meinh TYPE marm-meinh,
END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MTART'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 1.
ls_fieldcat-ref_fieldname = 'MTART'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'VKORG'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 2.
ls_fieldcat-ref_fieldname = 'VKORG'.
ls_fieldcat-ref_tabname = 'MVKE'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 3.
ls_fieldcat-ref_fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'MARC'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-key = 'x'.
ls_fieldcat-col_pos = 4.
ls_fieldcat-ref_fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
INTO TABLE l_itab
WHERE msehi IN s_meinh.
LOOP AT l_itab.
ls_fieldcat-fieldname = l_itab-meinh.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = l_fieldcat_col_pos.
ls_fieldcat-ref_fieldname = 'MSEHI'.
ls_fieldcat-ref_tabname = 'T006'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
ENDFORM. " DISPLAY_DATAENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DY_TAB_CREATE
text
--> p1 text
<-- p2 text
FORM dy_tab_create .
CREATE DYNAMIC INTERNAL TABLE AND ASSIGN TO FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_dy_cat
IMPORTING
ep_table = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
*CREATE DYNAMIC WORK AREA AND AASIGN TO FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
ENDFORM. " DY_TAB_CREATE
*& Form FILL_FIELD_CATALOG_DY
text
FIELD CATALOG FOR CREATING A DYNAMIC TABLE
FORM fill_field_catalog_dy USING l_fieldcat TYPE lvc_t_fcat.
DATA: BEGIN OF l_itab OCCURS 0,
meinh TYPE marm-meinh,
END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
DATA: l_umren TYPE string.
DATA: l_var TYPE string.
CLEAR ls_fieldcat.
ls_fieldcat1-fieldname = 'MTART'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 1.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'VKORG'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 2.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'WERKS'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 3.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'MATNR'.
ls_fieldcat1-key = 'x'.
ls_fieldcat1-col_pos = 4.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 18.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
INTO TABLE l_itab
WHERE msehi IN s_meinh.
SORT l_itab ASCENDING.
DESCRIBE TABLE l_itab LINES l_count.
LOOP AT l_itab.
ls_fieldcat1-fieldname = l_itab-meinh.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = l_fieldcat_col_pos.
ls_fieldcat1-datatype = 'dec'.
ls_fieldcat1-intlen = 5.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_DY
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM get_data .
SELECT
amtart bvkorg cwerks amatnr
INTO TABLE itab
FROM mara AS a
JOIN mvke AS b ON bmatnr = amatnr
JOIN marc AS c ON cmatnr = bmatnr
JOIN marm AS d ON dmatnr = cmatnr
WHERE a~mtart IN s_mtart
AND b~vkorg IN s_vkorg
AND c~werks IN s_plant.
SORT itab ASCENDING.
DELETE ADJACENT DUPLICATES FROM itab.
SELECT matnr umren meinh FROM marm
APPENDING TABLE itab1
FOR ALL ENTRIES IN itab
WHERE matnr = itab-matnr
AND meinh IN s_meinh .
ENDFORM. " GET_DATAcan you check this for creation of dynamic table
******DATA DECLARATION*****************************
FIELD-SYMBOLS : <it_final> TYPE STANDARD TABLE,
<wa_final> TYPE ANY,
<w_field> TYPE ANY.
***DYNAMIC CREATION OF FIELDCATALOG****************
*FIRST 2 FIELDS FIELDS FIELD1 AND FIELD2 ARE CONSTANT, FIELDS OBTAINED IN THE LOOP ENDLOOP ARE DYNAMIC,
*LIKEWISE DYNAMIC FIELDCATALOG IS CREATED
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
LOOP AT it_mandt WHERE mandt IN s_mandt.
CONCATENATE 'CLNT' it_mandt INTO wa_fieldcatalog-fieldname.
wa_fieldcatalog-inttype = 'NUMC'.
wa_fieldcatalog-outputlen = '14'.
wa_fieldcatalog-reptext = it_mandt.
wa_fieldcatalog-seltext = it_mandt.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR :wa_fieldcatalog ,it_mandt.
ENDLOOP.
********CREATE DYNAMIC TABLE************************
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcatalog
IMPORTING
ep_table = new_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN new_table->* TO <it_final>.
*********CREATE WORK AREA****************************
CREATE DATA new_line LIKE LINE OF <it_final>.
ASSIGN new_line->* TO <wa_final>.
*********INSERTTING WORK AREAR TO INTERNAL TABLE******
INSERT <wa_final> INTO TABLE <it_final>.
*******POPULATING DATA*******************************
LOOP.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_final> TO <w_field>.
<w_field> = '12345'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_final> TO <w_field>.
<w_field> = '21453DD'.
FIELD1 AND FIELD2 ARE COMPONENTS OF FIELDCATALOG.
ENDLOOP.
ENDLOOP. -
How to populate data in dynamic internal table
Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
01
02
03
04
05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
types : begin of t_qpcd,
codegruppe like qpcd-codegruppe,
code like qpcd-code,
end of t_qpcd.
data:wa_qpcd type t_qpcd,
i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
CASE BUTTONSELECTED .
WHEN P_DOWNLD .
PERFORM SELECT_AND_DOWNLOAD .
WHEN P_CHKFIL .
PERFORM CHECK_FILE_TO_UPLOAD .
WHEN P_UPLOAD .
PERFORM UPLOAD_FROM_FILE .
WHEN P_SHOW_T .
PERFORM SHOW_CONTENTS .
ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
CLEAR DD02L .
SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
IF SY-SUBRC EQ 0.
IF DD02L-TABCLASS = 'TRANSP' .
TABLE_NAME_IS_VALID = 'X' .
ENDIF .
ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
MESSAGE I398(00) WITH 'Table' MTABLE_N
'successfully downloaded to '
MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
TEXTLINE1 = 'Are you sure you wish to upload'
TEXTLINE2 = 'data from ASCII File to DB table '
TITEL = 'Confirmation of Data Upload'
IMPORTING
ANSWER = ANS.
IF ANS = 'J' .
PERFORM CHECK_FILENAME.
CLEAR MSY_SUBRC .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
IF SY-SUBRC EQ 0.
DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
IF LINES_OF_ITAB GT 0 .
MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
ENDIF .
ENDIF.
IF MSY_SUBRC EQ 0 .
MESSAGE I398(00) WITH LINES_OF_ITAB
'Record(s) inserted in table'
MTABLE_N .
ELSE .
MESSAGE I398(00) WITH
'Errors occurred No Records inserted in table'
MTABLE_N .
ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\'
MASK = ',.,..'
MODE = '0'
IMPORTING
FILENAME = MFILENAM
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
CONCATENATE 'C:\'
MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = I_STRUCTURE_NAME
CHANGING
CT_FIELDCAT = IT_FIELDCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
LOOP AT IT_FIELDCAT .
CLEAR WA_FIELDCATALOG .
MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
ENDLOOP .
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FIELDCATALOG
IMPORTING
EP_TABLE = MITAB .
ASSIGN MITAB->* TO <FS_ITAB> .
DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
SAURABH SINGH
SENIOR EXECUTIVE
SAMSUNG INDIA ELECTRONICS LTD.,NOIDA -
Logic for retreiving the values from a dynamic internal table
Hi all,
I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields.
Regards,
SukumarHi,
this is for printing out the info in a dynamic table,
it will work likewise to insert data.
PARAMETERS:
p_tabnam TYPE tabname DEFAULT 'DB_TABLE_NAME'.
DATA:
lv_dref TYPE REF TO data,
ls_dd03l LIKE dd03l,
lt_fieldname TYPE TABLE OF fieldname,
ls_fieldname TYPE fieldname.
FIELD-SYMBOLS:
<fs> TYPE STANDARD TABLE,
<wa_comp> TYPE fieldname,
<wa_data> TYPE ANY,
<wa_field> TYPE ANY.
REFRESH lt_fieldname.
SELECT * FROM dd03l INTO ls_dd03l
WHERE as4local = 'A'
AND as4vers = '0000'
AND tabname = p_tabnam
ORDER BY position.
ls_fieldname = ls_dd03l-fieldname.
APPEND ls_fieldname TO lt_fieldname.
ENDSELECT.
IF NOT ( lt_fieldname[] IS INITIAL ).
CREATE DATA lv_dref TYPE TABLE OF (p_tabnam).
ASSIGN lv_dref->* TO <fs>.
SELECT * FROM (p_tabnam) INTO TABLE <fs>.
WRITE:
/ 'CONTENTS OF TABLE', p_tabnam.
LOOP AT <fs> ASSIGNING <wa_data>.
SKIP.
WRITE:
/ 'LINE', sy-tabix.
ULINE.
LOOP AT lt_fieldname ASSIGNING <wa_comp>.
ASSIGN COMPONENT sy-tabix OF STRUCTURE <wa_data> TO <wa_field>.
WRITE:
/ <wa_comp>, <wa_field>.
ENDLOOP.
ENDLOOP.
ENDIF.
grtz
Koen -
Distinct values from dynamic internal tabls
Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
AnujHi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you. -
How to delete data from dynamic internal table
Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
MrunalHi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
<LT_DATA> TYPE table,
<L_FIELD> type any.
ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump. -
Column names of a dynamic internal table
Hi Friends,
I have a dynamic internal table flowing in my ABAP program and I want to list down the column names of the this dynamic internal table.
The declaration of this dynamic internal table :
FIELD-SYMBOLS:
<l_t_data> TYPE STANDARD TABLE.
Can you please tell me how to get the column names?
Thanks,
GauravHi,
You can use ABAP Runtime Type Identification to get the column names of the internal table.
e.g >
>lo_itab holds reference to description object of internal table whose column names i have to extract.
>Using method describe_by_data of class cl_abap_typedescr export the field symbol assigned to the table and import the object reference into lo_itab.
>Then using method get_table_line_type of lo_itab import line type description object reference into lo_line.
>Check if lo_line is referring to a structure, if yes , downcast it to a object reference lo_struct of type cl_abap_structdescr.
>The column description of all columns in the structure is stored in 'components' table of cl_abap_structdescr.
So loop at the table to get all the column names stored in column 'name' of table 'components'.
Thank You.
Maybe you are looking for
-
Include current file location of document in InDesign
Hi There, is it possible to include the current location of my file in my InDesign-document like it is in MS Word? Please don't ask me why I need that, I also find it stupid but it is a requirement a project work... I would be glad to read your answe
-
How do i import director 7 files into current premiere pro
how do i import director 7 files into current premiere pro I have a project created in Macromedia Director 7. I was told by sales that this would import into Premere Pro. However I have no Idea how! Any help would be appreciated.
-
Install applications after install of Yosemite 10.10.2
I erased my HD with disk utility and then did a fresh install of Yosemite. Now when I try to install the programs I had previously, legal/licensed programs or even just a basic install like Firefox downloaded from the Internet, the install fails. The
-
How to import mp4 into after effects cs4
I recently got a gopro hero 3 and wanted to slow a 960p 50fps video down in AE but i cannot open it. it just keeps saying it's of an unsopported format. How do I fix this?
-
Hi all Why redisribute workload allows to transfer from one purchase group to another purchase group though sc has follow on document but still sc allows me transfer ? Why we do have contracts in the redistriution workload. for eg any one can edit t