Sortable Header Ascending/ Descending Arrow is not refreshing
Hi,
When I clicked on the sortable Header column its showing up in the ascending/descending order with arrow up and down, results also displaying accordingly, but if I go to other screen and come back to the same screen , its still showing up the ascending/descending arrow , but the results are not showing according to the order, what parameters need to be set to not to appear that arrow if I come back from other screen. I want it to be reset, if I go back to other screen and come to this screen. I dont want that arrow to be appeared when the page loads. The arrow is showing up in ascending/descending order but the results are not showing up in that order when I come back to this page again.
I have to log out the application for the arrow to disappear.
Please help me
Thanks
Power
Hi:
I had the same problem here. Did you get it resolved? If so , would you please share with me?
Similar Messages
-
Table does not refresh after database level action
We have defined an Advanced table on a VO to represent invoice lines. The VO is referenced by a VL from the invoice header.
At one point during our process, a database level package is executed on the current lines. We have a "Requery" button to refresh the lines, however, the lines do not refresh unless we exit the invoice entirely and come back to it via the VL.
How can we refresh the lines on a current table after a database level transaction occurs?
Thanks, Jerry.
Our AM code is as follows...
// handleRefreshInvoiceLines( )
public void handleRefreshInvoiceLines()
OAViewObject vo = (OAViewObject)getInvoiceLinesVO1( );
if( !vo.isPreparedForExecution( ) )
getTransaction( ).validate();
vo.executeQuery( );
clearVOCaches( "InvoiceLinesEO", true ); // troubleshooting
} // handleRefreshInvoiceLines()Thank you. I've moved clearCache around a bit. apparently vo.isPreparedForExecution() is false. I wonder why?
--Jerry. -
Report does not refresh when link to page
I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgambleI can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY -
Deleting the Row from the table is not refreshing the contents in the form
Hi,
We developed a table and form in the same UI based on the following suggestion.
Display and edit currently selected row of ADF Table in ADF Form
1. Created one view object based on the employees table.
2. dragged the view object to the UI as table.
3. dragged the view object as form.
4. set partial triggers on the form's container (panelformlayout) as tableId.
Tested the application with the edit options and everything is working fine. But the problem comes when we delete the record from table. it is not refreshing the form based on the newly selected row after deleting the record. If we commit the data the form contents are updated to the selected row (which is not desired).
Can you please suggest how to fix the issue, refreshing the form with the selected row after deleting the records.
Thanks and Regards,
S R PrasadThe Code snippet looks fine. I think, the issue is in the partial trigger setting
4. set partial triggers on the form's container (panelformlayout) as tableId.In order to the table to get refreshed, the table's partialTriggers property should be set to id of the delete Button.
Go to table, select partialTriggers in the Property Inspector, Click on Expression Builder at the right and select the delete Button.
Can you set this and check?
Sample Code:
<af:panelHeader text="panelHeader 1" id="ph1">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar">
<af:commandButton text="Delete" id="cb1"/>
</f:facet>
<f:facet name="legend"/>
<f:facet name="info">
<af:table var="row" rowBandingInterval="0" id="t1"
partialTriggers="::cb1">
<af:column sortable="false" headerText="col1" id="c1">
<af:outputText value="#{row.col1}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="col2" id="c4">
<af:outputText value="#{row.col2}" id="ot3"/>
</af:column>
<af:column sortable="false" headerText="col3" id="c3">
<af:outputText value="#{row.col3}" id="ot4"/>
</af:column>
<af:column sortable="false" headerText="col4" id="c5">
<af:outputText value="#{row.col4}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="col5" id="c2">
<af:outputText value="#{row.col5}" id="ot5"/>
</af:column>
</af:table>
</f:facet>
</af:panelHeader>
Thanks,
Navaneeth -
Manual rebate condition exclusion not refreshed after redetermination of it
Hi Experts.
I am working with CRM 4.0.
Lately, we realized there is an error occurring in the price deternination:
The condition exclusion for manual rebate condition is not refreshed after redetermination of the product. There is missing a price validation before saving the document with the new product.
Step-to-step description of the error:
1) I am creating an order in trx. CIC0 or CRMD_BUS2000115 and determine the product (sector A).
2) Now I assign a manual rebate (condition Z...) of 20 % on item level.
3) On header level I replace the product to one of another sector (B).
4) I check the pricing conditions of the new product on item level. The same rebate of 20 % is maintained.
This is an error, because the condition exclusion for products of sector B allows rebates only until 5 %.
Can anybody help me, please.
Best regards,
CristinaThis is not standard due to information of SAP OSS.
-
Space Before/After Not Refreshing in Paragraph Palette
Hi, I'm using Illustrator CS4 and am frustrated that in the paragraph palette, when I select text with specific settings for space before or space after, these values do not refresh to what is applied to the text. The values just remain at the last setting that I input or something. So I have no way of determining what the space before or space after is on different chunks of type. And if I try to adjust the settings up or down (using the arrows), it will jump to whatever setting is displayed (which is not what is actually applied to the type.
- Has anyone else ever experienced this behavior?
- Any workarounds?
- Any other ways to detect the actual values applied to the text?
THANKS! Very frustrating bug.are you selecting the text Frame? if the palette shows the last used settings it means the whole textFrame has no custom spacing applied. If you see nothing, it means mixed settings.
you need to place the cursor inside a paragraph in order to be picked up by the palette. -
Ascending descending table column in swt
Hello,
I am create eclipse RCP application and use SWT table and i am trying to ascending descending column value but not working in column shell value is not change so please help me ...Hi Brian de Alwis sir Thank you ,
But sir my column value (cell value) is combobox , how to sort column combo value in my table ....
please sir help me -
Cursor not refreshing quickly enough with v13.1
With the new update, the cursor is not refreshing quickly enough with multiple presses to the arrow (or ctrl-arrow) keys. For example, if I do three or four arrow presses in a row, the cursor disappears until I stop the sequence of arrow presses, waits a fraction of a second and re-appears,
This is extremely annoying as I can maneuver around my code without stopping to see where I am. Is anyone else experiencing this?
Any ideas how to fix? Thanks in advanceHi mseifert,
Can you have a look at this post to see if it is the same issue you are facing?
http://forums.adobe.com/message/5631553#563155
Thanks,
Preran -
Can not refresh server manager Error:0x8007045b
OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
JakeHi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies -
Can not refresh page after save properly(When not saving master record)
I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
MohsenHi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank -
Can not refresh the metrics in schedular
Post Author: sachinddalal
CA Forum: Performance Management and Dashboards
Hi,
When I refresh the metric using schedular, the metric is not refreshed , nor schedular return any error. But when checked in metrics proparties, the last refresh date is not changed, niether the values are updated.
Whe I try to refresh the metric manual, the values are refresh.
Please help me to troubleshoot the problem of refreshing metric through schedular.
Thanks,
Regards
Sachin DalalPost Author: jezbraker
CA Forum: Performance Management and Dashboards
Scheduler is pretty horrid for refreshing metrics.Better of to use the Rules engine and create a rule thats based on a schedule that based on condition (1=1 works well ) then refreshes metircs.troubleshooting is best done with the trace options in setup/parameters.there are a few other ways or seeing what the schedulers up to - but id stick to rules if i were you. -
Clicking a tree node does not refresh the fields in the table component
hi all,
I am using a tree component along with a table component in my page.so whenever i am clicking on a node it should display the relevant information of that node in the table from the database.But whenever i am doing the page is not refreshing and the old values of the textfields in the table still exist.i have written the code to populate the table in a button click event.It is working fine but the same is not working when i am clicking any node in the tree component.Can anyone provide a solution to this problem.
Thanks and regards,
Prasant KumarNever mind... I actually found something that works...
treeModel.nodeStructureChanged(leadSelection); -
Report Portlets do not refresh data.
How can I refresh a report portlet?
I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
Thanks, DebI had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.
-
Workbook not refresh after running Planning Function (BI-IP)
Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
SupasakeHi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D -
Firefox is running when my laptop comes out of system standby, but the page that was displaying when the laptop went into sleep mode is now a white canvas that does not refresh.
The application is not hung, because I get prompted to save tabs when I quit, but for some reason, I can't prompt Firefox into refreshing the screen.
I'm running Firefox on a Thinkpad T400 which has Intel 4 series Express integrated Graphics.This also happened if the network adapter is disabled then enabled. My computer is Windows 7 x64. Firefox needs to be killed from taskman before it will load a new instance of the application. I can also reproduce with all add-ons disabled.
Maybe you are looking for
-
Problem printing pdfs exported from IDCS3 to hp color laserjet 2550L
Since upgradingn to IDCS3, whenever I print a pdf exported from ID to my hp color laserjet 2550L, the graphics print with a red overlay and other colors change as well (black type prints brown, blue prints maroon). If I print the file to a .ps file,
-
SQL Servers's SCOPE_IDENTITY() function in Oracle???
There is a query in SQL SERVER in my project SELECT SCOPE_IDENTITY() I would need to write equivalent query in Oracle. Could you pelase let me know what is the substitue for the function SCOPE_IDENTITY() in Oracle?
-
Mac os x cd has been in processing for 4 days.
Is this normal for it to be in the processing stage for so long? Please reply quick.
-
how do i get my cam to work with msn- and yahoo can i get it to work with videochat please if anyone can help i would be very happy in advance thank you i have isight i have an other cam too a genius eyecam i cant seem to get it to work on my g5 or m
-
After new update my iphone 5 rear camera started giving blur images
After I updated with new software my phone's back camera started giving blur images and video. tried switching off and reset as well but no use.