Sorting activated and non-activated songs
Hi there.
I have set my iPod to sync only activated songs, so that I can change the content from time to time. But now I didn't find a way to sort my library by activated and non-activated songs (you know, the small box left of a songs name which is usually activated). Now I begin to lose the overview.
Does somebody know how to sort the library by activated and non-activated songs?
Thanks for any help.
Regards, Chris
You can't sort by checkmarks, but you can separate your library between checked and unchecked items with two smart playlists:
1- Make a smart playlist defined as: +Bitrate > 0+, and select the options "Match only checked items" and "Live Updating". Call this playlist "Checked Items".
2- Make another smart playlist defined as: +Playlist -- Is Not -- Checked Items+ and select the option "Live Updating". This will show you all the un-checked items.
Similar Messages
-
Transfering Master and Transaction data to active and non active versions
Hi Gurus,
I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
1. Is it possible to release Master and transaction data to active and non active versions ?
2. How i need to config if i want to release Master and Transaction data in version 001?
Please let me know .
Thanks in Advance
Regards,
RajHi Raj,
1) Once you create active integration models for master data and
transactional data, the data will get updated in active version 000
2) For creation of non active version use transaction
/SAPAPO/MVM
3) For copying of data from active to non active version, use
transaction /SAPAPO/VERCOP
Regards
R. Senthil Mareeswaran. -
I have an ipod touch 3rd generation and a new computer. How can i add all purchased and non purchased songs into the new computers itune library? The old computer is dead! Will not even turn on. Help!!!!!!!! I'm going crazy.
Look into downloading some type of iRip software! Allows you to transfer music from iPod to iTunes.
-
Service activity and external activity?
1. i give materails ........want the work to be done.......................
2. All the materials and work to be done by vendor.....................
3. i want to buy materials from outside......................................
wht i will be using in first case and in 2nd case ( extaral and service acitivity) is concern .............
pls give me a very brief discription if possible .............1. i give materails ........want the work to be done.......................
buy materials using external activity or non stock components and free issue to vendor to get the work done
2. All the materials and work to be done by vendor.....................
here I would use service activity to be able to break the down to service masters rahter than one lumpsum
3. i want to buy materials from outside......................................
internal activity with non stock components -
EWA reporting: Not showing User Activity and Transaction Activity
Hello everyone!
Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
But 1 of them showing User activity = 0 and no Transaction activity also.
Any ideias to solve it?Hi Daniyar,
I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
Regards,
BASIS. -
Planned Activity and Actual Activity Fields & relevenat table
Hello,
Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report):
PLANNED ACTIVITY: - Production Order confirmation Planned Activity column
ACTUAL ACTIVITY: - Production Order confirmation Actaul Activity column
thanks & regards
Chaitanya RayaproluHi,
Procedure :
go to the feild(Cursor in feild) press"F1" for help ( Pop up will appear )
click on "technical help"( Icon with cross planting of hammers)
from the small popup u can get Feild name and table or Struc.
copy the feild name.
go to Transaction "se16"(Tables) enter "DD03L" ( data base table ) and press enter.
enter the feild name ( Copied earlier ) in feild name block and execute(F8) the table.
You will see all the tables and structures containing the particular feild.
This is the best solution to be self sufficient.
please close the thread after testing the solution...and appreciate your reward.
Prakash -
Regd: Active and In-active version data of a CR
Hi Experts,
We have a requirement to compare the active (approved and created) and in-active (yet to be approved) data of an entity in a change request. For this, I have tried cl_usmd_gov_api-> if_usmd_gov_api_cr_data~get_crequest_data, if_usmd_gov_api_entity~query_entity, cl_usmd_model_ext->read_entity_data_all etc.. But all of these are not giving desired results. I need all the changed values which are yet to be approved in one ITAB or structure and all the active data in another.
So would request if any one can share any input on this.
Thanks And Regards
Pradipta K MishraHi Pradipta,
MDG 7.0 SP2 offers this as an out of the box feature. In the common user interfaces you can enable the "Highlight Changes" functionaly that basically colors all fields that have been changed. Using the mouse-over on a changed field, the tooltip mention the old and new values.
In addition you can enable the BCV side panel content for changed fields. This would display all changes in a table-like view.
Refer to the configuration guides of the related MDG application for more details.
Best regards
Michael -
Firefox process is starting, but no activity and no active application
I am already for long-time a happy firefox user. I rate myself as an experienced firefox user and troubleshooter. But today I got some unfixable problems, and also can not find my problem in the forums. Ony this tread is a bit related, but offers no solution : https://support.mozilla.com/nl/questions/759683
The firefox.exe process starts, loads till about 10MB in memory and than no activity. Also no CPU usage. Appears to be hang.
If I remove js3250.dll there is an error message that the file can not be found. So I guess the basics of FF are started.
The profiles are already moved to an other location. Later I uninstalled FF. Several times rebooted. Moved ALL references in program files and in my roaming user profile to a different drive and installed FF again.
Virusscan and Firewall software are disabled at the moment.
Unfortunately FF keeps responding in the same way. Only starting firefox.exe as a visible process but as application not visible. and no activity after a few seconds (ca. 10 MB in memory)
Hope the cure can be found soon. I like Chrome less than FF... Other browsers even less ;-|''The version of Comodo I am working with is version 5.3.xxx''.
Even so, the "Comodo Safe Surf" component may still be installed from an earlier (pre 3.1o) version of Comodo. You should still make sure that you don't see "Comodo Safe Surf" in the Windows Control panel program list of installed programs.
''I forgot to mention that even safe-mode will not do anything different.''
If Firefox doesn't start, even in Firefox [[Safe Mode]], and you've already tried a
[http://support.mozilla.com/kb/Basic+Troubleshooting#w_clean-reinstall clean reinstall] (more info on that [http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows here] and [http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall here]):
There are some other possible solutions here:
*[[Basic Troubleshooting#w_other-solutions|Basic Troubleshooting Other solutions]]
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Other_solutions
...including:
* ''[http://kb.mozillazine.org/Kill_application With Firefox completely closed], open the [http://kb.mozillazine.org/Installation_directory application folder] <snip> rename firefox.exe to '''firefox1.exe''' then double-click firefox1.exe. If Firefox runs without problems, it could indicate that your firewall is blocking Firefox <snip>. It may also indicate that some malicious code has targeted Firefox . Note: If [http://kb.mozillazine.org/Firefox.exe_always_open firefox.exe is always open], specific malware may have targeted Firefox if it is set as the [http://kb.mozillazine.org/Default_browser default browser]. '' -
External activity and service activity
I have a very basic question. How often a external activity is uniquely used that cannot be covered by an service activity. My point is that is there a business case that cannot be taken care of by service activity. External processing activity is actually a service received from a vendor, extra thing is some goods movement perhaps? Can anybody give an clear explanation of how these two are different and what difference does that make to a project.
Whereas external activity allows you to procure only one specified service, a service activity enables you to plan and procure several services and to enter data for services that has not yet been specified in detail. For this purpose you must create service specifications when creating a service activity (do search on service specification further).
This is the major difference, the rest remaining the same.
Regards,
Ammar -
Creating activity and populate activity journals from ext. data
We are looking to create activities and corresponding journal entries from an external database application.
The external database is SQL, and there are 30,000 data records.
What is the best approach for mass load of external data into a CRM activity.
ThanksI don't know of a tool to use to load them. We wrote a load program that calls function module BAPI_ACTIVITYCRM_CREATEMULTI to create the activities
Hope this helps;
Brant -
Note: I have an ipad as well, and the messages did not appear there either.
There isn't a way but I guess you could try turning iMessages off restart the phone and turn them back on. Just have the person resend them to you.
-
Hey guys!
Really struggling with this one. Since Edge only has rectangles and ellipses built in as available shapes, how to I/we work with polygon shapes and active mouseover areas INSIDE of these shapes and non-active mouseover areas OUTSIDE of the shapes?
Problem/symptom: when I import a polygon, be it any file format from from Photoshop or SVG from Illustrator, a rectangular border/background (transparent) gets applied, leading to this rectangle defining the mouseover area of the shape - and not the shape itself (be it a star or whatever).
WHAT I WANT: the very shape defines the mouseover area. How do I achieve this?? See examle below:
WHAT I DON'T WANT: how is is now:Thanks for your answer, resdesign.
I've had a look at the edge commons library, and it seems like it opens up a lot of possibilities. However, I cannot figure out how to access/target individual shapes and layers for applying effects like you would with symbols (rotation, colorchange and so on).
WOULD BE GREAT TO HAVE THE SHAPES INSERTED ON SEPERATE TIMELINES for further work and effects manipulation - is this somehow possible? So that one could reach the shapes from the stage with something like:
sym.getShape("shapename");play("show"); -
What is diff b/w pick and switch activity in bpel?
what is the difference between pick activity and switch activity in BPEL? example Please
1)The switch activity is an IfElse with two different flows, based on a conditional expression, derived out of existing message(s) in your process.
Eg. i) Whether the salary is greater than 10,000 or not.
ii) Whether the age is greater than 60 or not.
iii) whether the department is finance or not.
2)The pick activity is an IfElse with two different flows, based on two different messages/signals, that you can expect to receive(when you are waiting for a message) from outside of your process.
Eg. i) whether you received a reply message or a timeout signal.
ii) whether you received a AddNewEmployee message or UpdateEmployee message.
The (decision for which route to be taken for) pick activity is based on the MessageType, while the switch is based on the contents in a message. The pick activity implies that you are waiting for a message, this can occur, at the start of your process or in the mid of your process. However, switch activity doesnot wait for any message, hence can only occur in the mid of the process and can not be the start of a process.
Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved. -
Unicode and non-unicode string data types Issue with 2008 SSIS Package
Hi All,
I am converting a 2005 SSIS Package to 2008. I have a task which has SQL Server as the source and Oracle as the destination. I copy the data from a SQL server view with a field nvarchar(10) to a field of a oracle table varchar(10). The package executes fine
on my local when i use the data transformation task to convert to DT_STR. But when I deploy the dtsx file on the server and try to run from an SQL Job Agent it gives me the unicode and non-unicode string data types error for the field. I have checked the registry
settings and its the same in my local and the server. Tried both the data conversion task and Derived Column task but with no luck. Pls suggest me what changes are required in my package to run it from the SQL Agent Job.
Thanks.What is Unicode and non Unicode data formats
Unicode :
A Unicode character takes more bytes to store the data in the database. As we all know, many global industries wants to increase their business worldwide and grow at the same time, they would want to widen their business by providing
services to the customers worldwide by supporting different languages like Chinese, Japanese, Korean and Arabic. Many websites these days are supporting international languages to do their business and to attract more and more customers and that makes life
easier for both the parties.
To store the customer data into the database the database must support a mechanism to store the international characters, storing these characters is not easy, and many database vendors have to revised their strategies and come
up with new mechanisms to support or to store these international characters in the database. Some of the big vendors like Oracle, Microsoft, IBM and other database vendors started providing the international character support so that the data can be stored
and retrieved accordingly to avoid any hiccups while doing business with the international customers.
The difference in storing character data between Unicode and non-Unicode depends on whether non-Unicode data is stored by using double-byte character sets. All non-East Asian languages and the Thai language store non-Unicode characters
in single bytes. Therefore, storing these languages as Unicode uses two times the space that is used specifying a non-Unicode code page. On the other hand, the non-Unicode code pages of many other Asian languages specify character storage in double-byte character
sets (DBCS). Therefore, for these languages, there is almost no difference in storage between non-Unicode and Unicode.
Encoding Formats:
Some of the common encoding formats for Unicode are UCS-2, UTF-8, UTF-16, UTF-32 have been made available by database vendors to their customers. For SQL Server 7.0 and higher versions Microsoft uses the encoding format UCS-2 to store the UTF-8 data. Under
this mechanism, all Unicode characters are stored by using 2 bytes.
Unicode data can be encoded in many different ways. UCS-2 and UTF-8 are two common ways to store bit patterns that represent Unicode characters. Microsoft Windows NT, SQL Server, Java, COM, and the SQL Server ODBC driver and OLEDB
provider all internally represent Unicode data as UCS-2.
The options for using SQL Server 7.0 or SQL Server 2000 as a backend server for an application that sends and receives Unicode data that is encoded as UTF-8 include:
For example, if your business is using a website supporting ASP pages, then this is what happens:
If your application uses Active Server Pages (ASP) and you are using Internet Information Server (IIS) 5.0 and Microsoft Windows 2000, you can add "<% Session.Codepage=65001 %>" to your server-side ASP script.
This instructs IIS to convert all dynamically generated strings (example: Response.Write) from UCS-2 to UTF-8 automatically before sending them to the client.
If you do not want to enable sessions, you can alternatively use the server-side directive "<%@ CodePage=65001 %>".
Any UTF-8 data sent from the client to the server via GET or POST is also converted to UCS-2 automatically. The Session.Codepage property is the recommended method to handle UTF-8 data within a web application. This Codepage
setting is not available on IIS 4.0 and Windows NT 4.0.
Sorting and other operations :
The effect of Unicode data on performance is complicated by a variety of factors that include the following:
1. The difference between Unicode sorting rules and non-Unicode sorting rules
2. The difference between sorting double-byte and single-byte characters
3. Code page conversion between client and server
Performing operations like >, <, ORDER BY are resource intensive and will be difficult to get correct results if the codepage conversion between client and server is not available.
Sorting lots of Unicode data can be slower than non-Unicode data, because the data is stored in double bytes. On the other hand, sorting Asian characters in Unicode is faster than sorting Asian DBCS data in a specific code page,
because DBCS data is actually a mixture of single-byte and double-byte widths, while Unicode characters are fixed-width.
Non-Unicode :
Non Unicode is exactly opposite to Unicode. Using non Unicode it is easy to store languages like ‘English’ but not other Asian languages that need more bits to store correctly otherwise truncation will occur.
Now, let’s see some of the advantages of not storing the data in Unicode format:
1. It takes less space to store the data in the database hence we will save lot of hard disk space.
2. Moving of database files from one server to other takes less time.
3. Backup and restore of the database makes huge impact and it is good for DBA’s that it takes less time
Non-Unicode vs. Unicode Data Types: Comparison Chart
The primary difference between unicode and non-Unicode data types is the ability of Unicode to easily handle the storage of foreign language characters which also requires more storage space.
Non-Unicode
Unicode
(char, varchar, text)
(nchar, nvarchar, ntext)
Stores data in fixed or variable length
Same as non-Unicode
char: data is padded with blanks to fill the field size. For example, if a char(10) field contains 5 characters the system will pad it with 5 blanks
nchar: same as char
varchar: stores actual value and does not pad with blanks
nvarchar: same as varchar
requires 1 byte of storage
requires 2 bytes of storage
char and varchar: can store up to 8000 characters
nchar and nvarchar: can store up to 4000 characters
Best suited for US English: "One problem with data types that use 1 byte to encode each character is that the data type can only represent 256 different characters. This forces multiple
encoding specifications (or code pages) for different alphabets such as European alphabets, which are relatively small. It is also impossible to handle systems such as the Japanese Kanji or Korean Hangul alphabets that have thousands of characters."<sup>1</sup>
Best suited for systems that need to support at least one foreign language: "The Unicode specification defines a single encoding scheme for most characters widely used in businesses around the world.
All computers consistently translate the bit patterns in Unicode data into characters using the single Unicode specification. This ensures that the same bit pattern is always converted to the same character on all computers. Data can be freely transferred
from one database or computer to another without concern that the receiving system will translate the bit patterns into characters incorrectly.
https://irfansworld.wordpress.com/2011/01/25/what-is-unicode-and-non-unicode-data-formats/
Thanks Shiven:) If Answer is Helpful, Please Vote -
What is the meaning of "PSEUDO" and "NONE" in v$session table.
Hi
What is the meaning of "PSEUDO" and "NONE" in v$session table.
V$SESSION:
SERVER VARCHAR2(9) Server type (DEDICATED| SHARED| PSEUDO| NONE)
thanks
sivaPSEUDO is the server column's value of killed sessions, until they are cleaned up by PMON.
A dedicated server session will always have DEDICATED as server value, while a shared server session has SHARED when it's active, and NONE when it's inactive.
Maybe you are looking for
-
Is there a way to figure out what the current thread is?
I've got the following snippet of code: // create a new thread. If the current thread is not this new thread, return Thread CountDownThread = new Thread("CountDownThread"); CountDownThread.start(); if (/*CURRENT THREAD*/.getName() != CountDownThread.
-
Does this radio still qualify for the Sony exchange program? Or would I need to send it in somewhere for repair? Thanks! Dan
-
Is it Possible to Add a Power Pivot Gallery App in Office 365
Hi, I had created a site collection by using Business Intelligence center Template in Office 365(E3 Subscription). But I am not able to see Power Pivot Gallery App to Add. I tried to find and activate any feature depends on this. But could not find a
-
How can I use a existing USB Driver in NI VISA 3.0
Hello, we have an ftdi USB driver for our measurement device. The FTD2XX.sys is registred in C:\WINNT\system32\drivers Also I have a FTD2XX.dll and an FTD2XX.inf file. But I don´t know how can I register them in NI LabView or VISA. Have I to do a new
-
In desiging a door poster (poster the size of a door) Do I need to make the canvas size/art board the same size as a door? Or can I design on a smaller canvas and print larger? Thank You