Regd: Active and In-active version data of a CR

Hi Experts,
We have a requirement to compare the active (approved and created) and in-active (yet to be approved) data of an entity in a change request. For this, I have tried cl_usmd_gov_api-> if_usmd_gov_api_cr_data~get_crequest_data, if_usmd_gov_api_entity~query_entity, cl_usmd_model_ext->read_entity_data_all etc.. But all of these are not giving desired results. I need all the changed values which are yet to be approved in one ITAB or structure and all the active data in another.
So would request if any one can share any input on this.
Thanks And Regards
Pradipta K Mishra

Hi Pradipta,
MDG 7.0 SP2 offers this as an out of the box feature. In the common user interfaces you can enable the "Highlight Changes" functionaly that basically colors all fields that have been changed. Using the mouse-over on a changed field, the tooltip mention the old and new values.
In addition you can enable the BCV side panel content for changed fields. This would display all changes in a table-like view.
Refer to the configuration guides of the related MDG application for more details.
Best regards
Michael

Similar Messages

Transfering Master and Transaction data to active and non active versions

Hi Gurus,
I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
1. Is it possible to release Master and transaction data to active and non active versions ?
2. How i need to config if i want to release Master and Transaction data in version 001?
Please let me know .
Thanks in Advance
Regards,
Raj

Hi Raj,
1) Once you create active integration models for master data and
transactional data, the data will get updated in active version 000
2) For creation of non active version use transaction
/SAPAPO/MVM
3) For copying of data from active to non active version, use
transaction /SAPAPO/VERCOP
Regards
R. Senthil Mareeswaran.

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Transactional Data Copy from In-Active version to Active version(APO)

Hi
I want to copy the Transactional Planning data from Inactive version to Active version, so that from Active version I can transfer that data to ECC.
Kindly give the valuable inputs for my Query.
Regards
Guru
Edited by: gurvarender singh on Jan 31, 2009 11:18 AM

try the transaction /SAPAPO/VERCOP - to Copy Planning Version
select if u want to copy the entire version (master as well as transaction data)
u can also trigger parallel processing and also restrict
Restriction via
Location Product
Location
Locatn Type
Production Plannr
SNP Plannr
Demnd Plannr
Transptn Plannr
Purch. Group

Controlling Access of end users on Categories and Activity versions

Dear All,
I am having end users who are having full access in learning Administrator for Creating Categories and Activity versions , Offerings and Classes in using Learning Administrator responsibility.
As per the business needs i need to create a new responsibility where end users can not create categories & Activity version but they can create only offerings & classes on selected Activity version.
your guide lines will be greatly appreciated.
Thanks & Regards,
Edited by: user1113648 on Apr 28, 2011 11:55 AM

Hi CDA
You're not understanding the way Discoverer works. The lowest level of security control that can be applied inside Discoverer is at the business area level. Thus if a user has access to any part of a business area then they have access to the whole business area. This is done by your administrator using TOOLS | SECURITY from the Administration menu bar.
The privileges that can be set using TOOLS | PRIVILEGES control what a user can do with the data that they have access to (remember that access itself is at the business area). Thus if a user has the Create / Edit workbook privilege and they have access to two business areas then they have that privilege for both business areas and create or edit workbooks to their heart's content in both of them.
Further, and I think this is where you may be getting confused, you have to understand that an end user cannot grant the privilege for another end user to have access to their business area simply by sharing a workbook. The act of sharing a workbook does not share the access rights. In order for one user, aka the Registrar, to be able to run a workbook that was created by another user, aka the HR director), the Registrar must already have been granted access to the HR business areas by the Discoverer administrator. If a user does not have access to a business area but does have access to a workbook from that business area then they will not be able to execute the workbook.
It therefore sounds like you do not have security under control.
Best wishes
Michael
BTW: Are you using the SunGard Banner system by any chance, and are you using the ODS? If this is the case, you may be interested in knowing that my company has partnered with SunGard Higher Education to bring Discoverer training and consulting to their customers.

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

I "restored" my Apple TV and now it is 37 hours into the step, "activating the date and time"? I am stuck.

My Apple TV stopped working while watching a Netflix show and the light on the box started blinking. It seemed like all I could do was "restore" which I did. Then in the process of restarting the Apple TV it said "activating the date and time".It has been stuck on this spot ever since (2 days). Everytime I turn the Apple TV back on to see where it is, it is still on this step. As for my choices on what I would call the main screen, I can either go to "Settings" or "Computers". All the numerous choices available (Netflix, Podcasts, NBA, MLB, You Tube, etc, etc) are not available..not even on the screen. This Apple TV box is pretty much useless at this point. Any advice??

    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.

Difference between Replication and Activation of Data Sources

Hi,
I would like to know what exactly happens when data sources are replicated and when data souces are activated
Regards,
Visali.G.

Once you make the replicate of DS at BW, what ever the struc. for that DS would be regenarated, and accordingly your extraction and setup table struc. would get updated by the latest changes made in the DS.
At the BW side all corresponding communication and transfer structure and PSA structure would also get generated according to the DS struct. per R/3
Need of Replication in other terms we can say
Replication needs to be done is each time you save you datasource in R/3. This causes the timestamp of the datasource to be changed and hence the timestamp of the datasource in R/3 and BW are not in sync. Replication would make the timestamp in sync in both R/3 and BW.
Hence you would notice the error "Timestamp error" when you do not replicate the datasource after changing it.
Activating the data source, activating the structure and make available the dat source to use.

Show active current date and time in a Form continuously

Hi,
I am use Oracle Form 10.1.2 in Windows 2000.
Can we show an active current date and time in a Form continuously?
Perhaps in the main menu form.
So the user can see the moving time, instantly when the time change (withour pushing F5 for refreshing the form)
23-Sep-2006 06:00
-- one minute later will show
23-Sep-2006 06:01
-- one minute later will show
23-Sep-2006 06:02
-- and so on
Any help is appreciated.
Many thanks,
Buntoro

Here is a quick, untested suggestion that sketches out one way of approaching this.
If you only require updates every 60 seconds, you can use the TIMER built-in to create a repeating timer with a sixty-second delay. Each time the timer expires, update a text item to reflect the current time (obtained by selecting SYSDATE from DUAL on the database.)
If the time is to be updated precisely when the minute changes, use two timers -- the same one described above, and a one-shot. Before you create either timer, run the following query:
SELECT 60-TO_NUMBER(TO_CHAR(SYSDATE, 'ss')) FROM DUALThis will give the number of seconds remaining until the minute changes. Use this value to set the duration of the one-shot timer. When it expires, create the repeating sixty-second timer.
There is a good possibility that this method will not be terribly precise, depending on factors like server resources, user load and network distance. A more network-friendly approach would be to use a JavaBean that relies on the PC's system timer to track the passage of time, and calculates server time based on the observed time difference between PC & server.
Hope this helps,
Eric Adamson
Lansing, Michigan

Automatic changing of activity start date and time of planned orders in SAP

Hello experts,
I have a requirement that in the transaction /SAPAPO/SEQ1 for the list of planned orders what ever we get in the sap we have to swap the activity start date and time for two planned orders which we select automatically. For this I have found the BADI "/SAPAPO/SEQ_VISUAL01".
Now i am able to identify the two selected planned orders inside the BADI method SEQGRID_TOOLBAR_OKCODE_HANDLE.
Now my requirement is i have to swap the start date and time for these two planned orders automatically i.e. through BAPI or any FM.
Any idea of any BAPI or FM to change the details of the planned order.
Thanks,
Sanath.

Hi Sanath,
Please check this BAPI BAPI_MOSRVAPS_SAVEMULTI3. This Bapi has the provision of chaning Planned Order & Production Order Data. Also, you can explore more info on available bapis in the T-code 'BAPI'.
Thank you,
Santosh KB.

TS2972 I have ATV2 and the correct version of ITunes yet when watching a movie from ITunes, ATV2 will drop it mid way through and then will claim home sharing is not activated in ITunes. Can anyone offer advice please?

I have ATV2 and the correct version of ITunes yet when watching a movie from ITunes, ATV2 will drop it mid way through and then will claim home sharing is not activated in ITunes. Can anyone offer advice please?

yepp, I have done numerous tests today, skipped router and hard wired betwenn PC and appletv3. same problem.
same network, but from my laptop, works like a charm.. so its not reproducable on all machines.
this seems to be a itunes/bonjour problem, not ATV3 problem.

Hi there. I have 3GS and tried to up-date it today (19 Feb 2013) with iTunes and now I can't activate it! it shows the "Your iPhone could not be activated. tha activation server is unavailable...". The iPhone has never been jailbroken!!!

Hi there. I have 3GS and tried to up-date it today (19 Feb 2013) with iTunes and now I can't activate it! it shows the "Your iPhone could not be activated. tha activation server is unavailable...". The iPhone has never been jailbroken!!!
- have tried restor
- have tried recovery mode
- have tried on 2 PCs
... can someone tell me what to do! I'm tryin for 5hours now!

no! i havent change my carrier still the same

Active version and Inactive version in Product llocation plan

Hi Gurus,
We are using product allocation functionality, in which i would like to what is the importance of active and Inactive versions.
Which is the version in which we need to maintain the product allocation (MC94).
Regards,
Babs.

Hi dsk,
Thank you for the feedback on active version and inactive version.
My doubt is if you look in to transaction MC94 , we have two tabs one u201CActive versionu201D and other u201CInactive versionu201D.
When I maintained product allocation in Active version u201CA00u201D and executed the sales order product allocation is not happening. And then I tried to maintain the allocation under Inactive Version u201C000u201D then executed the sales order. Now the product allocation is happening and even the structure is getting updated after saving the sales order. So I need to under stand under which version we need to maintain the allocation so that allocation functionality will work during sales order creation.
Regards,
Babs

TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

They are not a supported carrier. You'll have to take it up with them.

DMS-KM connector and active version in DMS

I was wondering if it possible to bring back only the active version of a document using the DMS connector?? We created a varient but do not see anywhere to specify that we only want to Active version to be returned... so for each document we get every version...
Cheers,
Derek

Hi Derek,
if this is not a configuration option in the DMS repository manager, does it at least return a KM property for "active=yes/no" or similar?
If it does that, you could implement your own repository filter on that basis or access the DMS resources via query-based taxonomies that either do or do not allow certain values for that property.
Regards,
Karsten

Regd: Active and In-active version data of a CR

Similar Messages

Maybe you are looking for