Sorting in keyfigures is deactivated in Bex Anlayser 7.x

Hi ALL,
I cant able to sort key figures( sort option in the context menu is deactivated) .
I have executed report in Bex Analyser , it has one structure in the column and in row it has hierarchy.
It has three key figures (sales volume, gross volume, net sales) .
After executing the report , i cant able to sort the key figures. When i go to the context menu the sort option is disabled.
Can anyone explain this?
Thanks,
Karthik

Hi,
Check Note 1527041.
Note 1527041 - BExAnalyzer: Enable Sorting for Structures
Regards,
Michael

Similar Messages

Keyfigure dsiplay problem in BEx Report

Hello Experts,
In my BEx report i need to display keyfigure values as a whole numbers instead of fraction.I have selected 0 in decimal place of keyfigure properties but the problem is if I have a decimal it gets truncated instead of round figure. Eg. for value 153.65 report shows 153 but I need to display as 154.
Regards
Kumar

To be more specific suppose u r having a key fig say KF having the value 153.65.
Don't set any decimal place for the KF. Just go to the properties and hide it
Now create a new formula and set the decimal places to 0 in the properties and use the following formula.
( FRAC ( 'KF' ) < 0.5 ) * FLOOR ( 'KF' ) +
( FRAC ( 'KF') >= 0.5 ) * CEIL ('KF')
Hope this helps

Keyfigure has value in BEx query, but shows zero/0 in Webi

Hi community,
I have the following issue with a Bex query with 2 structures:
in Bex, the budget column shows figures right. but in Webi, it shows zero for certain profit KPIs (calc. keyfigures, CKFs).
only for these KPI cells, it is not a general issue with that budget column!
in the Bex cell editor, I have created cell references for these profit KPI cells, but that should not be relevant.
As SAP cannot connect to our BO Webi via OSS properly, I would like to address you.
anyone had a similar situation or solution?
every hint is appreciated! Many thanks and
best,
Phil

Hi Ingo
I am also currently meeting such a problem.
I have Cubic Meter stored in my cube and my BEx query. Also, in my BEx query, I have a unit conversion to convert Cubic Meter to Cubic Feet.
In WebI, when I pull out both Cubic Meter and Cubic Feet, Cubic meter returns me 0, while cubic feet returns me a figure.
Below are the settings of the BW & BOBJ system:
SAP BW SP6
BOBJ SP2 FP2.3
Hope to hear from you soon.
Thanks!

Change Sorting order in F4 Help in BEx Query

Hello All,
My users want to change the sorting order of variable (e.g. Calmonth) in the selection screen (while executing a query).
Currently, by default,the sorting order is ascending on key.
I need to change it to descending on key.
How to change the sorting order for F4 ONLY?
Thanks,
Mainak

Hi,
You can sort the Char.Values by doing settings in Query Designer :
Say for 0calmonth :
In its Display properties tab,You select appropriate options in
Sort Char -> select the name
sort by -> Key/Text
Sort Direction -> Ascending/Descending.
You will then have them in required order.
ALso if you want it only for F4 help:
In F4 help screen,you will see two arrow buttons next to Char. name. they are useful for sorting the values to either descending or ascending.
Hope it helps:)
Edited by: Sriman on Nov 12, 2008 5:17 PM

Keyfigure aggregation problem in BEX

Dear gurus,
I am creating a vendor performance report. In the report I will have SLA derived from formula "Goods Issued / PO Requested Qty"
The output of my report as follow
Vendor | SLA | Goods Issued | PO Qty Requested

Dear gurus,
I am creating a vendor performance report. In the report I will have SLA derived from formula "Goods Issued / PO Requested Qty"
The output of my report as follow (drill down by Vendor Level)
Site....Vendor......SLA.......Goods Issue....PO Qty
101.....90203.......100%......800 CV..........800 CV
101.....90202........80%......160 CV..........200 CV
102.....90201........50%........20 CV............40 CV
102.....90199........33%........30 CV..........100 CV
Result............... ( A )
I would like to know what is the output for result row A ?
I have tried several methods of aggregation, but the output is not relevant.

Key Figure Sorting in Workbook

Hi Experts,
I am creating a workbook where the key figures are supposed to be sorted in descending order. I tried using a Condition the displays the Top 100% of the results (because I want to display all, I just want to sort). The condition is working fine during the first run. However, when I save the workbook and re-open it again, the sort does not work anymore. Please advise. Any help is greatly appreciated.
Thanks,
Juice

Hi Juice,
Why dont you use the key figure sorting property present in the the Bex Analyzer.?
Steps:
1. In analysis mode, select a key figure cell in the analysis grid and access the context menu. This can be done in 2 ways..
○ Choose the cell with your right mouse button (secondary mouse button).
○ From the menu, choose BEx Analyzer --> Context Menu for Selected Cell
2. Choose Properties.
The properties dialog box for the selected key figure appears.
On the Sorting tab, you can configure the different sort options for the selected key figure.
Hope this helps you!
-Pradnya
Edited by: Pradnya Rane on Mar 24, 2009 5:20 AM

BEx Query Analyzer Value Display of +/- Sign

The KeyFigure values in the BEx Analyzer are being displayed as 512.740000000- with a negative sign in the back. I tried to change the settings in Bex Query Designer -- Query Properties -- Value Display to "Before the Number -123.45" setting. It looks like it doesn't have any effect.
Please let me know if I need to change the setting from the backend, we are on BI 7.0.
Venkat

It should work. Try to refresh the query if not come out of Bex and Relogin. This should fix

Sorting query in workbook

Hi Expert.
I have a big problem.
When I insert a query in a workbook this not sort by keyfigure.
I insert a condition ( TOP 20 for example ).
If I refresh a query in a workbook this sort correct but if I execute a workbook this is sorted by characteristic.
My problem is like
Sorting by a Key Figure in Query Designer
Anybody find a solution?
Thank,
Marco

add
I can sort a query using VBA code but the problem is when I have a query with hierarchy.

Can not Sorting by Key Figure with Analyzer and Excel 2007

Hello experts,
We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
We have applied the patch 10 for BEx BI 7.10.
Has anybody had the same problem?
Thanks in advanced.

Hi Patricia,
Have you got two structures in your query?
Please take a look at the following notes:
1378796 - Disabled Sorting when there is one struct. in the drilldown
1332267 - BExAnalyzer: changes in cell properties dialog / sorting
these should explain why the sort feature is no longer available in certain scenarios.
many thanks
Orla.

Total and Average in RESULT of same keyfigure?

Hi guyz,
Just want to ask if having the SUM and AVERAGE result of one (1) keyfigure is possible in BEx Query Designer?
Here is the report:
                                                              Volume
Customer A           Material X               100
                                 Material Y               200
                                 Material Z               300
                                 RESULT                600             ---> total --- (100 + 200 + 300) = 600
Customer B           Material X              400
                                 Material Y              500
                                 Material Z              600
                                 RESULT               1500           ---> total --- (400 + 500 + 600) = 1500
RESULT                                                1050           ---> average of result --- (600 + 1500) / 2 = 1050
How will I do the AVERAGE? I already got the TOTAL since it's the DEFAULT in CALCULATION tab. But is it possible to also have the AVERAGE?
Thank you!
Loed

Hi Loed,
You can try to use Exeption aggregation to acheive this.
OR
You can use cell restrictions and get this done.There are many documents avaliable for Cell Restrictions
Rgds
SVU123

Selecting, reading and sum of billing quantity for last 12 months in transformation end routine

Hi experts,
i have requirement to write end routine to read a DSO for last 12 months sales quantity for each month and sum value pass to keyfigure
not interested using bex variable, while data loading from source to target dso in end routine i am trying to read another DSO which is same as my
target dso where information is stored by fiscal period, year material etc. finally there is a keyfigure in target whih needs to be filled with sum of 12
months sales quantity, for each record form sourc to target maximum of 12 records will be in read dso (for 12 months) my routine is like below.
i am not expert in abap please kindly gothrough and guide me in this
TYPES: BEGIN OF s_/BIC/AZOSLS00,
FISCPER type /BI0/OIFISCPER,
FISCVARNT type /BI0/OIFISCVARNT,
PLANT type /BI0/OIPLANT,
STOR_LOC type /BI0/OISTOR_LOC,
/BIC/MATERIAL type /BIC/OIMATERIAL,
VTYPE type /BI0/OIVTYPE,
BILL_QTY type /BI0/OIBILL_QTY,
END OF s_/BIC/AZOSLS00.
DATA: it_/BIC/AZOSLS00 TYPE TABLE OF s_/BIC/AZOSLS00,
wa_/BIC/AZOSLS00 TYPE s_/BIC/AZOSLS00.
SELECT
FISCPER
FISCVARNT
PLANT
STOR_LOC
/BIC/MATERIAL
VTYPE
BILL_QTY
     FROM /BIC/AZOSLS00 INTO TABLE it_/BIC/AZOSLS00
       FOR ALL
      ENTRIES IN RESULT_PACKAGE
       WHERE
below field is from value of fiscal period (which is fiscal period -999 ex: for 001.2014 this
value will be 002.2013 so 12 months including current period)
FISCPER >= RESULT_PACKAGE-/BIC/ZFISCPERF
below is result filed fiscal period (here i dont know which keyword or statement to be used to select
interval values this between statement giving syntax error that can not be used in where for for all entries
between RESULT_PACKAGE-FISCPER
        AND
         FISCVARNT = RESULT_PACKAGE-FISCVARNT AND
         PLANT = RESULT_PACKAGE-PLANT AND
         STOR_LOC = RESULT_PACKAGE-STOR_LOC and
      /BIC/MATERIAL = RESULT_PACKAGE-/BIC/MATERIAL .
    SORT it_/BIC/AZOSLS00 BY FISCPER FISCVARNT PLANT STOR_LOC
    /BIC/MATERIAL .
    LOOP AT RESULT_PACKAGE ASSIGNING <result_fields>.
      READ TABLE it_/BIC/AZOSLS00 INTO wa_/BIC/AZOSLS00 WITH KEY
below dont know what statement i need to use in read statement for interval of fiscal periods
giving error that >= can not be used
     FISCPER >= <result_fields>-/BIC/ZFISCPERF
FISCPER = <result_fields>-FISCPER
         FISCVARNT = <result_fields>-FISCVARNT
         PLANT = <result_fields>-PLANT
         STOR_LOC = <result_fields>-STOR_LOC
      /BIC/MATERIAL = <result_fields>-/BIC/MATERIAL
       BINARY SEARCH.
      BREAK-POINT.
      IF sy-subrc = 0.
below for each record there will be 12 records in read so sume of 12 records quantity i need to pass to result again dont know what to say here
sum statement giving error
            <result_fields>-/BIC/ZLSTSLS12 =
             sum(wa_/BIC/AZOSLS00-BILL_QTY).
          ENDIF.
    ENDLOOP.
friends please help me in this.
Thanks
Chandra.

Hiii,
If you only want to store last 12 months data in Target ODS .
Then Create filter in DTP and write routine in filter for calmonth or fiscal period.
Refer the below link to create filter routine :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b2db87-639b-2e10-a8b9-c1ac0a44a7a6?QuickLink=index&…
Regards,
Akshay

Filtering free characteristics issue

Hi Sdns,
i am unable to fileter the free characteristics in Bex query analyser.But i can do the same in Bex query designer.
Bex anlayser goes back to the normal excel sheet with out displaying any error messages while i am tring to filter the free characteristic.
Advance Thanks to replies.
karun

Hi,
You are trying to filter in query output or workbook. If workbook refresh the workbook once after it is opened and go for filter.
You can filter by right clicking any of the free characteristic and choosing select filter value.
or Do you have problem in setting filter in query designer.
Regards,
Akhan

Error in getting both Text and Key of infoobject

Hello Guys,
I am working on BI 7.0 & BO XI 3.1, SP 3 and FP 3.6.
I have a requirement where in I have Infoobjects in BW like Internal Sales
Rep, External Sales Rep, External Manager in BW. I have infocube where I
have all these reps & keyfigures. I create BEx Query from the infocube and
was able to see Key and Text in BEx Query & RSRT but I can't see that Key
value in Webi report.
Note: I don't have Masterdata configured for Internal Sales Rep, External
Sales Rep, External Manager. These data comes directly from data source to
BW infocube. All the reps are referenced to 0PERSON infoobject in BI 7.0
Thanks in advance.
With Regards,
Chintan Vora.

Hi Geetha,
yes, it is possilble that, you can disply label for both key and text for a characteristics in Bex query, but for this you have to do small modification in modelling, here is one example:
Create one custom 'z' InfoObject lets say ZCUSTOMER with Reference Characteristic of 0CUSTOMER and add it to the data target, map it with same field for which 0CUSTOMER is mapped and load data into target (DSO, cube) or if you are reporting on multiprovider then assign it.
Because ZCUSTOMER is created with reference of 0CUSTOMER and mapped with the same source field , ZCUSTOMER will act as copy of 0CUSTOMER.
In query designer drag 0CUSTOMER and ZCUSTOMER. change display setting
0CUSTOMER display as Key only
ZCUSTOMER display as Text only.
You can apply this for all master characteristics.
Hope this will resolve your problem, because i have faced same requirement and implemented the same.
let me know for any further clarification.
Regards
Avinash

Build the Bar chart from Cross Tab which have 3 measures with cell refr.cal

Hello Friends. I want to Build the Bar chart from Cross Tab which have 3 measures with Actual , Plan and Forecast
But Issue here is each cell is defferent like i have to do different calculation for each cell for actual, plan, forecast
like A = Jan act/Budget actual, Where as B = Feb Act/ Jan Budg+Febbdgt_March Budget
So now when I right click to say turn to Chart it is not generating the chart
Please help how to build bar chart since i do not have 1 key figure which i can drag and drop in view structure of chart so how to handle this
                         Jan, Feb, March, Aprl, May, June
Actual                  A       B       C     D
Plan                     N       M       O     P
Forecast
SONIYA

Hi Soniya,
It will be better if you can get these keyfigures calculated from the BEx with the help of structures in the BEx.
At the report level it will be complex to create these variables and also not sure whether going to work:
But you can try something like this:
A= If (L01 Moths="JAN") then Sum (Actual)/Sum (Bud) Else 0 similarly for other months.
Then you need to create one more variable (measure) which should be plotted on the chart as:
Final Act = If([L01 Month]="JAN") Then A ElseIf([L01 Month]="FEB") Then B ElseIf([L01 Month]="MAR") Then C
Final Plan= If([L01 Month]="JAN") Then N ElseIf([L01 Month]="FEB") Then M ElseIf([L01 Month]="MAR") Then O
similarly you have to create variables for Forecast, then finally you can plot final 3 variables in the graph.
Hope it helps you.
Regards,
Rohit

Unit display issue for MDX

Hi,
Following is the issue what I face.
I issue a MDX query against an infocube. There is a calculated measure in the MDX query whose calculation is in the MDX statement itself(e.g. sales value/sales quantity). The result shows the unit of the calculated measure as "EUR KG" rather than "EUR/KG".
If I issue the MDX query against the query built on the same cube(the calculation of the keyfigure is in the bex query this time and not in the MDX statement) I get the proper unit as EUR/KG.
Can anybody suggest how the units can properly be displayed when queried directly against the cube?
Thanks,
Anurag.

Resolved

Sorting in keyfigures is deactivated in Bex Anlayser 7.x

Similar Messages

Maybe you are looking for