Sorting Solution Manager

When you execute SOLAR01 or SOLAR02 and the documents come up on the right hand side, is there anyway to sort these columns? I heard there was a way but I can't figure it out.
Thanks in advance!

Hi Ryan,
It is not directly possible to sort the documents that appear on the right hand side.
But in the SOLAR01 or SOLAR02 transaction, in the "Business Blueprint" or "Configuration" menu, you can find the "Find Document..." option which can be used for searching the documents.
This menu option will open up a screen for you where you can provide different parameter values for your search.
The output of this search can be sorted based on any field like "name of the document".
Hope it helps. Dont forget to reward points for useful answers.
best regds,
Alagammai.

Similar Messages

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • New componant list for service desk in Solution manager.

    Hello,
    We wanted to customize new componants for service desk. Please let me know is it possible to define new componant list in the Solution manager.
    Regards,
    Bhavesh

    Hello Waseem,
    Actually I want to configure a list of Customise component in side solution manager for incident management.( service desk)
    when we create ticket in service desk (in Solman) we have to select a component for the respective module( like BASIS, MM , Etc) those are the standard
    Components that is  given by SAP. I want to change that list and want to put my own list of component in the system.
    is it possible to do it in Solution manager? If yes then what sort of configuration required. ?
    Thanks in Advance
    Regards,
    Bhavesh

  • New to Solution Manager Implementation

    Hi Experts:
    We have implemented SAP ECC 6.0 in our company, our Organization decided to implement SolMan SP15. I will be a part of the team to implement SolMan. Just give a background of my experience, I am a MM Consultant.
    I need some direction from the Experts, first from where to start. Any relevant links to the right documents will be very helpful.
    Secondly for a SolMan consultant what should be the prerequisite from the previous experience point out view. It is required that the candidate to have SAP Basis knowledge.
    Any helpful guidelines and links to the material will be highly appreciated.
    Thanks
    James

    Hi Bill
    For you it is better to go to Solution manager functional role...or Solution consultant
    which is actually involved in implementation point of view.
    For you it is not required to learn basis........for e.g u r gng to do a ECC implementation ....wht is req from u will be
    Basis will set up landscape RFC logical component etc
    And you will create a project in solmaan do the blueprint in Solar01 etc.......for satellite ECC system
    and Even in the operation like Service Desk /CHARMS etc....can BASIS go and understand client processes ....and implement it in solman service desk.
    I dont think so....basis install solman and activate bc sets and do some basic configuration.....
    there after there are lot of CRM sort of configration like Sold to party and other BP creation with determination rule which is ofcourse can be done by you as u being functional role understand the ORG hierarchy of the client.SLA implementation etc.
    I hope it clarifies ur doubt
    Regards
    Prakhar

  • Workflow In solution manager

    Dear Friends,
                       We have configured a Workflow for Escalation mails in Solution manager.
                      The thing is we are Using request start . In that step we are using an
                      Expression for date and time , where date and time are container elemnts.
                      The values are coming properly.
                      Now the mail should be triggered when the deadline in the date and
                     Time is Reached.
                   The same thing is configured in R/3 server. there it seems to be workng fine.
                   All the required customization have been done in Solman server .
                  Still the step is not working...    It is showing IN process State.     
                  Any sort of help wld b appreciated.
    Thanks,
    Shashi

    You say customizing has been done.
    So it is superfluous to ask if the deadline background job is running.
    At what interval though?
    Also change the workflow with a hard value.
    If this works, then you know something is wrong with the containerelement.
    also check the short dump log, maybe the process dumps due to some explicable reason.
    Kind regards, Rob Dielemans

  • Solution Manager 7.1 Install, next steps

    I completed the install of Solution Manager 7.1 on Windows x64/SQL Server, I've read through the master installation guide, but I'm not certain what the next steps will be to get initial configuration done.  I've read multiple posts that mention running SOLMAN_SETUP from SAP GUI, but at present I can't seem to log in, because it seems to require a SAP Router?
    Question is do I really need the SAP Router, am I using the correct software (SAPGUI/SAPLOGON) to login?  Is there another piece of software I need?
    Ultimately I need to install ERP 6.0 however I can't complete that install without a key from solution manager, so I'll need to get this sorted first.
    I'd greatly appreciate a push in the right direction. Thank you!

    Thanks for the response, I did manage to get connected, after a while of searching I found that the listeners were not started for some reason, which I started, and I found a resource that detailed how to get logged in via SAPLogin. 
    This was prior to your response unfortunately, so I have already started down the path of running SOLMAN_SETUP without creating a client copy.  From what I'm reading in the article you linked, that's a best practice of sorts, but for us it will not be so important as our interest is in a development system only and have no production use planned at any time.  If it's not too late to create the copy I can still do so if it's going to ultimately benefit the installation.
    I ran into some issues going through the system preparation in solman_setup, now that I've read the article you've listed I'm still confused if I need SAP Router or not, I would greatly prefer not to use it as it seems to require additional network/DMZ setup and this is sort of a rush project at the moment.  Furthermore the guide you linked for SOLMAN_SETUP references a prerequisite that RFC Destination SAPOSS uses a working connection, which again seems to rely on the SAP Router.  I'm very interested in knowing if I can avoid that step, but if it's absolutely necessary something can be done.
    I've gone through the System Preparation guide, unfortunately SP10 seems to be the latest version so I'm not sure how much of this is redundant now in SP12. 
    Other questions:
    - LMDB seems to replace SLD but still requires a functional SLD?  I opted to configure a local SLD during installation but I've not looked into any additional configuration needed to be done here, is there a good article that explains SLD?
    I just need to get far enough along to generate the key to get ERP up and running ultimately, thanks for the help.

  • Solution Manager reinstall

    Hi,
    I tried SAP SolutionManager 7.0 install .
    What should you do to return it to the state before it
    installs it again when the error end is done while installing SolutionManager?
    Solution Manager 7.0
    Who anybody knows how it resolve?
    Thanks for your advance,
    Hiroya Adachi

    First of all i would read the installation guide and will check the system that is enough or not
    such as
    space required
    memory requirement
    correct OS and java are installed
    network is available
    when all the prerequites are completed then i will start the installation, and if then i will get any error then i will try to find on SDN and if i will not able to sort it out the problem by self then will rasie as OSS message to SAP and explain what i am doing and what is the problem,
    Regards
    Subhash

  • Solution Manager interface

    Hi,
    Can anyone give me assistance in the following requirement:
    When a call is created in solution manager (v4), I need to transfer the data through XI to an external help desk and visa versa.
    Where do I start?
    Thanks,
    Leanne

    There does not seem to be any Pre delivered SOL MAN content on the Service market place.
    That means you willhave to write some RFC's or Abap proxies on SOL MAN.
    The call centre application will probably have to expose a web service for you to consume. If not you will have to do it with some sort of file (FTP) mechanism.
    It still will be a bt of work to get this done.
    Rod

  • Validation while Article Creation Request through Solution Manager

    We are about to implement Solution Manager. We want to automate the process of registering some of the MDM requests through SolMan.
    We want to upload the standard formats which user needs to fill and also want to keep the validation for the minimum requirement in those templates.
    Any help will be appreciated.

    Thanks Ragu;
    This is what I am looking for.
    When a change request is created, we use the e-mail function in Solution Manager. For the Recipient we a valid "email address" . The recipient type is "Via internet.
    Using this sends the e-mail via excjhange server.
    What I am looking for is an "audit trail" of some sort (in Solution Manager) of what e-mails were sent. These do not show up in the "sent" items of outlook.
    Hope this make some sense.
    Regards
    Don Newton

  • Solution Manager 4.0 Presentation

    I need to give a presentation on Solman 4.0.
    Does anybody have any sort of multimedia presentation handy...or PDFs etc.
    Please reply or point me to a link...preferrably a Powerpoint presentation.
    Thanks
    Pree

    Hi Pree,
    SAP Service Marketplace provides many presentations on SAP Solution Manager. File format is in general .pdf
    http://www.service.sap.com/solutionmanager
    -> Media Library
    > Overview Presentations
    .........SAP Solution Manager - Overview (.pdf)
    .........SAP Solution Manager - Scenarios (.pdf)
    > Use Case Presentations
    .........detailed presentations on each use case
    Best regards
    Ruediger Stoecker

  • Landscape of Solution Manager

    Hi, All:
    My question is about the Solution Manager's Landscape. Normally, do we need 3-tier (DEV-QAS-PRD) landscape for Solution Manager implementation or only 1 Solution Manager to be installed is ok?
    Any info will be highly appreciated!
    Thanks!
    Best Regards,
    David

    Hi David,
    Thank you for the reward points.
    Regarding the landscape - Have not come across any document of that sort. People suggest based on experience.
    Sizing for solution manager - You can get the document from the below link in service market place.
    <a>https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000009816&_HIER_KEY=601100035870000192213&_HIER_KEY=701100035871000457214&_OBJECT=011000358700000255562007E&_SCENARIO=01100035870000000202&</a>
    best regds,
    Alagammai.

  • Solution Manager 4.0 Support Stack 9

    Support Stack / Support Pack 9 of Solution Manager has been called an Enhancement Pack or Feature Pack by SAP.  This means it includes new functionality.  Two new features that I have been able to identify are the Maintenance Optimizer and the "Synchronize system data with SAP Support Portal" tab of SMSY.
    Has anyone found some sort of release notes for the Enhancement Pack so that I can find out what other new features were deployed as part of the stack?

    Hello Steven,
    You can find the requested set of support package stack news on the SAP Service Marketplace page, quicklink /solutionmanager -> Media Library -> Technical Papers, document called: "4.0 Support Package Stack 9"
    Alternatively you may use the following link to directly access this document:
    <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700006487392006E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700006487392006E</a>
    The correct term for this development package is "support package stack" with the respective stack numbering as outlined on the front page of this slide.
    I hope this helps in finding the requested information.
    Best regards,
    Doreen

  • Problems with Solution Manager Graphics

    We are in the process of installing Solution Manager 4.0.  When we go to transactions SOLUTION_MANAGER and select a solution from the Solution Overview, none of the menus or menu graphics on the lower right side of the screen display.  We get a red error icon on the bottom of the screen, but no error message.  Similarly, none of the graphics display under SOLMAN_DIRECTORY.
    We've tried all of the actions defined in Note 834832.
    - All of the BSP's were activated in SICF.
    - The defaultUser alias is created.
    - We know that the hostname is correct because SOLUTION_MANAGER_BSP starts.
    - We've confirms that IGS is loaded and works by running an IGS test program.
    - We've tested the RFC connection to IGS.
    Does anyone have any ideas of how we can further tear this problem apart in order to find out where the failure is happening?
    I think the defaultUser alias may be the problem.  Is there some way I can verify this alias from a browser or trace its execution?

    SOLUTION_MANAGER_BSP has the same problem as SOLUTION_MANAGER.
    We looked at SMICM and couldn't see anything obviously wrong.  Nothing obviously wrong in the log.  Is there something in particular we should be looking for in SCICM? 
    I'm looking for some sort of log that could actually show the requests running the actual BSP's.  I don't see that in SMICM. 
    Any further ideas would be appreciated.

  • Solution Manager Certification

    Hi,
    I am looking for Solution manager Practice Questions for Certification
    any help related to Solution Manager 3.2 certification would be appreciated
    Thanks

    Hi All,
    Just a small doubt is there any substanial difference in SMI310_04 and SMI310_06 material.
    If somebody is appearing for SAP solution manager 4.0 certification , then in that case can referening SMI310_04 would be sufficient or SMI310_06 is a must as
    certification url its showing the required is SMI310_06 .
    Please revert back ASAP...
    and If somebody is having SMI310_06 please help me out in sorting this confusion...its urgent and can forward me the same at :[email protected]
    Reward points to all valuable suggestions
    Regards
    Atul Anand

  • Create a Support Message in Production system showing up in Solution Manage

    Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
    I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
    Thanks
    Paul

    Hi Paul
    The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
    Make sure your RFC's are trusted and that you have SAP ALL during config.
    I hope this will help:
    Setup Service Desk
    Steps to follow while configuring support desk.
    1) Implement the note 903587 .
    2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
    3) Check all the objects in the table BCOS_CUST using transaction SM30.
    Appl : OSS_MSG
    + :W
    DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
    + :CUST 620
    + :1.0.
    *4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
    4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
    4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
    4.3) Activation of the following components has to be done by replicating the previous steps
    3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
    3.2) SOLMAN40_SDESK_ACTIONLOG_001
    3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
    3.4) SOLMAN40_SDESK_TEXTTYPES_001
    *Depends upon the number of inactive BC set objects that we have after the upgrade.
    4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
    5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
    Number ranges for ABA notifications
    5.1) create an internal and external number range using transaction DNO_NOTIF.
    5.2) assign number range intervals to groups internal and external.
    5.3) SLF1 is the internal number range group
    5.4) SLF2 and SLF3 is the external number range interval
    5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
    5.51) Go to transaction DNO_CUST01
    5.52) From the GOTO menu select the menu item DETAILS
    5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
    The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
    Number ranges for Support Desk notification
    5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
    5.6) Then assign both the external and internal numbering
    5.61) Go to SPRO and then to SAP Solution Manager
    5.62) Then select General Settings and then select Transaction types
    5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
    5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
    5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
    6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
    6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
    6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
    7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
    8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
    8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
    8.2) Select the item Service Desk and then to general settings.
    8.3) Execute the category u2018Define Transaction Typesu2019.
    8.4) Select the transaction type as SLFN
    8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
    9) Activate the partner/ Organization
    9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
    9.2)Find the entries starting with HRALX
    HRALX-HRAC WITH VALUE 'X'.
    HRALX-OBPON WITH VALUE 'ON'.
    HRALX-PBPON u2018ONu2019.
    HRALX-MSGRE u2013 u20180u2019.
    9.3) If entries are not found create it.
    10) Generate Business partner screens
    10.1) Go to transaction BUSP.
    10.2) Execute the report with the following parameters
    CLIENT - Client in which business partners should be created (solution manager client)
    APPLICATION OBJECT-
    SCREEN - *
    Generate all/ selected screens - All screens.
    delete sub screen containers -
    11) implement SAP note 450640.
    11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
    11.2) Execute it with test mode box unchecked.
    If a new relationship is to be created then steps 12 and 13 has to be followed
    12) To create a relationship category
    12.1) Go to transaction BUBA
    12.2) Select the entry CRMH00: Undefined relationship
    12.3) click on copy
    12.4) Rename CRMH00 to ZCRMH00.
    12.5) CREATE A RELATIONSHIP CATEGORY.
    IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
    ' FROM BP2 : IS A PART OF ATTUNE
    13) Add the relationship category to the support team partner function
    13.1)Use SPRO
    IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
    -> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
    13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
    13.3) In the field relation ship category, Select the newly created relationship category and save.
    14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
    15) Create a new access sequence for the support team determination
    15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
    SAP Solution Manager -> Configuration ->
    -> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
    ->Define Access Sequence
    15.2) Click on New Entries
    15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
    15.4) Create an new Individual Access with the following value:
    u2022 Batch Seq: 10
    u2022 Dialog Seq : 10
    u2022 Source : Business Partner Relationship.
    u2022 Detail on the source:
    u2022 Partner Function : Reported By (CRM)
    u2022 Mapping/restrictions
    u2022 Flag Mapping/definition for partner being Searched
    u2022 Partner Function in Source: Support Team (CRM).
    Save it.
    This Access Sequence will give us the Partner which has the relationship assigned
    to the Support Team in the Reported By partner data.
    16) Adapt the partner determination schema/Function
    16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
    SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
    -> Partner Determination Procedure -> Define Partner Determination Procedure.
    16.2) The two options to adapt partner determination schema are
    16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
    16.22) select the line starting with SLFN0001 or the newly created procedure.
    16.23) Double Click on Partner Function in Procedure.
    16.24) Select the Partner Function "Support Team", and click Details.
    16.25) in the detail view only change the Partner Determination/access Sequence to
    the one we've just created. Save your entry.
    17) Create a root organizational model.
    17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
    17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
    17.3) enter the organizational unit, the description and save it.
    18) Create the support team organization
    18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
    19) Create the business Partners.
    19. 1) Key users- End user (Business Partner General) ,Address should be specified.
    19.2) go to the transaction BP.
    19.3) create a new Person, Select the role: Business Partner (Gen).
    For Identification of the key user
    19.31) click on the identification tab
    19.32) enter a line in the identification number formatted as follows
    IDTYPE : CRM001.
    Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
    eg: USER NAME : USER1.
    CLIENT : 100.
    SID : ER1.
    INSTALL NUMBER : 123456789.
    IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
    20) Message Processors- Support Team members .
    20.1) they should be created first as the users in the corresponding client of the solution manager.
    20.2) As business partners they will have the role 'EMPLOYEE'.
    20.3) Go to transaction BP .
    20.4) Create New Person with the role employee.
    20.5) In the Identification tab you should enter the user name in the employee data/User Name.
    eg: username: proc1
    enter proc1 in the field User name.
    21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
    22) Assign the business partners (Message Processors) to the previously created support team.
    22.1) Go to transaction PPOMA_CRM.
    22.2) Select the support team 1.
    22.3) Click on create
    22.4) select position
    22.5) call it 'MPROC_T1/Message Processors for team 1
    22.6) Replicate it for the other support teams.
    22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
    choose owner/Business Partner find and select the business partner
    22.8) Validate and Save it.
    22.9) If the assignment of business partner is not possible then implement the note 1008656
    Or 997009
    23) Create the iBase component
    23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
    23.2) or use the transaction IB51 to create the installed base.
    23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
    24)Assign Business Partners to iBase Components
    IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
    -> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
    *--optional--
    If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
    Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
    Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
    Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
    now to assign the partner Function "System Administrator".
    25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
    26)Define the transaction variant for the message processors
    Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
    Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
    27) Go to transaction PFCG
    27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
    27.2) Give a description Message Processor role and save it.
    27.3) Go to the menu tab and choose add report
    27.4) select the report type : ABAP Report
    27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
    27.6) Enter the previously created variant.
    27.7) flag the skip initial screen box.
    27.8) flag the SAPGUI for windows.
    27.9) Create a new transaction with tcode starting with Y or Z.
    27.10)Display this transaction and check the values at the bottom of the screen
    in the subscreen Default Values, you should have the following parameters:
    u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
    u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
    u2022 D_SREPOVARI-NOSELSCRN = X
    And also all the user should have the correct role.

Maybe you are looking for

  • HT4061 my memory is low on my ipad and i can not stay connected to the internet.  How do I fix this problem

    My ipad will not stay connected to the internet.  the message in the settings says low memory. How do I fix this problem?

  • Media Card

    I have a 8330 BlackBerry. When I go to Options and click on Media Card, it says, "Media card cannot be read. Verify that the memory card is formatted". When I format it I get a message that reads, "Media Card Format Failed".  Any solutions?

  • Coding block in BDC program Tcode F-63

    Hello Techies,                     Please help me in removing coding block in execution of BDC program for F-63, it is asking me to put Business Area. 

  • Sp gl

    hi    how to create spl GL code transaction for employee transaction.what we have to do here.they are asking to create all employee transaction in one group.

  • How to stretch the header the full width of the screen?

    I am trying to stretch the header which is a fluid grid layout div wrapped between body. I have something like the following: html <body> <div class="wrapper">   <div class="gridContainer clearfix"> <div id="header </div>   </div> </body> CSS #header