Sorting While maintaining data through SM30

Hi Techies,
I have developed a z-table with key fields a,b & c. Now when I am entering data through SM30, C(Char field) field is getting sorted after saving.
My requirement is to store the data in table without any sorting. Actually this field C has some sequencing issue. So, Is there any event for table which can be used to resolve this issue.
Note: I have already tried Event 01 by creating a new include and giving my ID breakpoint. But its noty trigerring .
Any advice would be deeeply appreciated.
Thanks & Regards,
Vinit

Hi Florian,
Actually The field 'C' mentioned above contains the name of chemical compounds. I am fetching this data from databse and displaying in printout. In printout the user wants the field 'C' should get displayed accoridng to Chemical Sequence.
Currently the data in Legacy system is stored in that manner. I just wanted to know if v can restrict the sorting of field C, Than i dont have to write extra logic for displaying data in printout.
Hope you understand the exact issue.
Any suggestions would be appreciated.
Note: yes i checked in SE16, SE16N & SE11, but same issue.
Regards,
Vinit
Edited by: vinit005 on Sep 16, 2011 9:33 AM

Similar Messages

While import data through ff_5 i am getting error

hello
while import data through ff_5 i am getting error as below
message error fv150 and fv151
'Termination in statement no. 00009 of acct
1101200570116; closing record 62F missing'
so please give solution
thank inadvance
SIRI

Dear Siri,
I guess you are importing an MT940 format. This format should have the closing balance at the end.
This closing balance starts with :62F:
A sample is
:61:0801180118DR3835,97NTRF000000//000000//
:86:1022 LTD CHENNAI18012008
:61:0801180118DR69885,09NCHK850819//850819//
:86:6101 LTD COCHIN18012008
:62F:C080118INR7210048,86
I guess that is missing in the import file.
Maintain that and the import will happen.
Assign points if useful
regards
Venkatesh

Error While Posting Data Through Tcode MM41

Hi Experts,
Getting error when entering article data through tcode MM41 :
Following errors occurred while posting data :
E M3 072 : Enter the RP type
I m already entering RP type in both DC and store tab available on article screen.
Thanks.

Hi Friend,
Youhave to enter for third time for your reference site say for example RFST and again third time i have to enter the RP.
Idealy you should first maintain for reference site initially.
eample I am maintaining MM41 for my store (site) so first at DC level and then at store level and then again when I accept to save the article at refercne Store level I have feed in the RP type.
Hope this solves you query.
Regards,
Ashutosh

Cannot maintain data in SM30

I added 2 fields in DB then i generated a table view object so that users can through sm30 to maintain data. Once i transport the reqeust to production and then maintain the data, system alert me that "Client has status 'not modifable'. Acutally, some of table views are maintain by this method. What's wrong? Thanks

1 - Goto your Z table in SE11
2 - On "Delivery and Maintenance" tab, check if Delivery Class is set to "A" and Data browser/Tableview Maint. is "X" (Display/Maintenance Allowed).
If they don't, change the settings and activate the table.
AFTER THAT, you should go to Utilities -> Table Maintenance Generator.
Click on the first button (the pencil for edit), then on the pop-up window click Expert Mode. Than select all items and click OK.
This should adjust all the SM30 program and should work OK!
The problem is that when you change the table Display/Maint. info, the SM30 function modules need to be updated. Otherwise, you still get the non-modificable message!
I hope this may be helpful!
Bye

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error while loading data through flat files

Hi,
I am laoding data through flat files
I loaded the data in development & then transported it to Quality system for doing Integration testing & loaded the data in Quality system & data loading was successful
But we do the regression testing in one more Quality system where the objects get transported from Quality system ,here when I try to the load the data to any of the cube in this system I am getting the following error
Error 'The argument 'US' cannot be interpreted as a number' on assignment field /BIC/ZIFBCOCTR record 1 value US
Generally we get this error when there is the data of one field is going to the other field
But one thing I am unable to understand is it was working fine in the Quality system and all the objects got transported from Quality to Regression testing system
Could any one help me out
Thanks
Maya

Hi,
Can you please cross check the file structure and the transfer structure.
Cheers,
Malli....

How to change font while displaying data through an ALV table in WDA?

Hi all,
I am displaying data through and ALV table. Now I want to change the FONT only for few rows. Is this possible?
If so then do the needful to me..
Thanks & Regards,
Yugesh A.

I believe as you have found 'LVC_FIELDCATALOG_MERGE' would only work with the classic dynpro (SAPGUI based) version of the ALV.
You won't be able to control the font the same way in the WDA version of the ALV. You will need to create a custom cell editor for the column(s) in question. You can then bind context attributes to the properties of the cell editor. You will need extra attributes in your bound context to control these settings on the row level. Also you will be restricted by the changing the DESIGN property. This means only the values allowed for the DESIGN of the particluar UI element. For a TextView that wouldn't be the font directly (the font of course comes from the Theme).
DATA l_salv_wd_table TYPE REF TO iwci_salv_wd_table.
l_salv_wd_table = wd_this->wd_cpifc_alv_adv( ).
DATA l_table TYPE REF TO cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
data textview type ref to CL_SALV_WD_UIE_TEXT_VIEW.
l_column = l_table->if_salv_wd_column_settings~get_column( 'ADD_PARTICIPANTS' ).
create object textview.
textview->SET_TEXT_FIELDNAME( 'ADD_PARTICIPANTS' ).
textview->set_design_fieldname( 'ADD_DESIGN' ).
textview->set_wrapping( abap_true ).
l_column->set_cell_editor( textview ).
DESIGN supports the following options:
Value
Visual Display
Description
emphasized
Text is highlighted in default size
groupTitle
Header for forms
This enumeration value is deprecated. Instead, use SectionHeader.
header1
Text is highlighted with font size +4 in relation to the default font size.
header2
Text is highlighted with font size +5.08 cm relation to the default font size.
header3
Text is highlighted in default size
header4
Text is highlighted in font size -1 (small) in relation to the default font size (like the legend but highlighted)
label
Text is display in the default font type. A space is always inserted after the text.
label_small
Text is displayed in default font type, as with label, onyl that font size is -1 (like the font size for header4).
legend
Text is displayed with default font type in size -1.
reference
Text is in italics and in default font size.
standard
Text is displayed in default font size. No text attributes are defined for this value.
monospace
Text is displayed in no-proportional font type. Each letter takes up the same space.

Error while loading data through s614

Hi
When I am trying to load data from structure s614..I am getting the Below error..
I have gone through Transact.RFC..there i found that for ALEREMOTE..function module 'RSAR_TRFC_DATA_RECEIVED'..time limit exceeded..
and also found that job was finished in the source system..
Can any one give some suggestion for this...and also i have a doubt..my client is having table s614 and structure 2lis_01_s614..do i need to run set up to extract data from this table..if it is so,how should i approach......
Thanks
Teja
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.

Hi,
I have a similary problem.
Have you help me??

Only 1st character while fetching data through get_char_property

Hi
I am reading excel file through OLE2 object. while I am fatching data thr this utility It is fetching only first character of the string.
procedure read_chr_cell( p_row number, p_col number, p_value in out varchar2 ) is
args ole2.list_type;
cell ole2.obj_type;
begin
args := ole2.create_arglist;
ole2.add_arg(args, p_row );
ole2.add_arg(args, p_col );
cell := ole2.get_obj_property(worksheet,'Cells',args);
ole2.destroy_arglist(args);
p_value := ole2.get_char_property(cell,'Value'); [[[ PROBLEM AREA ]]]
ole2.release_obj(cell);
end;
any advice is appreaciate
Thanks
Vishal

Hi Vishal
I think u need to LOOP Through the Records :)
Hope this helps...
Regards,
Amatu Allah

Problem while uploading data through F-43

Hello Experts ,
I am facing a problem while data uploading through F-43.
Suppose I have many vendors with having several debit and credit items for each.So in t code same screen will appear for same vendor several times where we have to enter debit / credit items.
Please suggest how to solve this issue through LSMW/BDC program.
Thanks in adv.
A Miter.

Hi..
Use BDC Recording MEthod ...
Develop BDC program, Before Recording the Transaction sit with Functional Consulatnt for REcord The f-43.
After that that u can do ur coding and built ur own logic.
Prabu

Problem while maintaining entries via SM30.

Hi Experts,
I have a custom table which needs to be maintained by SM30. I have generated the table maintainece for this table.
However when i try to add new entries and save, it gives a message saying that one one entry is chosen.
Then when i try to go back, it gives a pop-up saying that data was changed. Save the changes first. if i hit hit on Yes. then it agian go back to the screen where i can add entries and the same thing repeats. Basically not letting me save any entry.
Is there a way i can save my table entries?
Regards,
Anjali

Hi Steeve,
If you have made any changes in your custom table then follow the below steps may be ths can solve your problem.
1. Adjust table ny T-Code SE14 (Database uttility) Always adjust your table when ever you make any chnages in it.
2. Regenerate the table maintainece view by selecting all the options. (regenerate FG, etc). When you click on edit icon you will get a popup message in that popup message select expert mode and check all the options.
hope this will help you.

Error while uploading data through CSV File

Dear All,
While Performing following steps I have encounted error in BW 3.5.
Step 1. Right-click Source System u2013 demo: flat file, and then select Create InfoPackageu2026.
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and
Step 3. Click the External data tab. Select options as shown in the screen. Enter a file name with a path.(CSV File)\
While checking the preview I am able to see the values inside CSV file,
But while Starting the scheduler to upload this data it is displaying following error=>
Syntax error in template RSTMPLIR, row 0 (-> Long text)
While checking performance assistant following detail is displayed.
*Diagnosis
Field "C_R_D" is unknown. It is neither in one of the specified tables nor defined by a "DATA" ...
System response
The program generation was terminated.
Procedure
Correct the template*
Can you guide how to eliminate this error?
Points will be rewarded for your contribution
Regards,
Purav

Flat File was in error.

Short dump:ASSIGN_TYPE_CONFLICT- While loading data through DTP

Dear all:
We currently work with BI NW2004s SP10. We created transformation for mapping InfoSource and InfoCube based on 3.x transfer rule. For example, we used cube 0PUR_C04 and Data Source 2LIS_02_ITM_CP. And the transformation is "TRCS Z2LIS_02_ITM_CP -> CUBE 0PUR_C04". Everytime when we tried to load data via DTP. A runtime short dump occurred: ASSIGN_TYPE_CONFLICT
Error analysis:
You attempted to assign a field to a typed fie but the field does not have the required type.
we went back and forth to activated transformation and DTP. But still, same error occurred.
Any idea, please !!!!
BR
SzuFen

Hi Pavel:
Please refer to the following information-
User and Transaction
    Client.............. 888
    User................ "TW_S
    Language key........ "E"
    Transaction......... " "
    Program............. "GPD0
    Screen.............. "SAPM
    Screen line......... 6
===========================================================
Information on where terminated
    Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
     "EXECUTE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 704
    of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
    The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
    Job Name....... "BIDTPR_284_1"
    Job Initiator.. "TW_SZU"
    Job Number..... 16454800
===========================================================
Short text
    Type conflict with ASSIGN in program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
===========================================================
Error analysis
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
===========================================================
Information on where terminated
    Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
     "EXECUTE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 704
    of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
    The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
    Job Name....... "BIDTPR_284_1"
    Job Initiator.. "TW_SZU"
    Job Number..... 16454800
===========================================================
Line SourceCde
674         ELSE.
675           ASSIGN rdsTG_1->*          to <_ys_TG_1>.
676           CLEAR <_ys_TG_1>.
677           MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
678           <_ys_TG_1>-requid    = l_requid.
679           l_recno_TG_1          = l_recno_TG_1 + 1.
680           ls_cross-insegid      = 1.
681           ls_cross-inrecord     = l_recno_SC_1.
682           ls_cross-outsegid     = 1.
683           ls_cross-outrecord    = l_recno_TG_1.
684
685           CALL METHOD i_r_log->add_cross_tab
686             EXPORTING
687               I_S_CROSSTAB = ls_cross.
688
689 **     Record# in target = sy-tabix - if sorting of table won't be changed
690           <_ys_TG_1>-record     = l_recno_TG_1.
691           INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
692           IF sy-subrc <> 0.
693             CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
694           ENDIF.
695
696         ENDIF.      "Read table
697 *
698       ENDIF.
699       CLEAR skipseg_all.
700     ENDLOOP.
701 * -
insert table into outbound segment -
702
703     <_yt_TG_1>[] = <_yth_TG_1>[].
>>>>>
705     rTG_1->insert_table( rdtTG_1_dp ).
706   ENDMETHOD.                 "execute
707
708
709
710 endclass.                    "lcl_transform IMPLEMENTATION
711
712 &----
713 *&      Form get_runtime_ref
714 &----
715 *       text
716 ----
717 *      -->C_R_EXE    text
718 ----
719 form get_runtime_ref
720 changing c_r_exe type ref to object.
721
722   data: l_r_exe type ref to lcl_transform.
723   create object l_r_exe.
===========================================================
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 0TOTDELTIME
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070420
SY-UZEIT 164557
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
===========================================================
Active Calls/Events
No.   Ty.          Program                             Include
      Name
    6 METHOD       GPD0QBVJ2WFQZZXBD0IJ1DSZAEL         GPD0QBVJ2WFQZZXBD0IJ1DSZAEL
      LCL_TRANSFORM=>EXECUTE
    5 METHOD       CL_RSTRAN_TRFN_CMD============CP    CL_RSTRAN_TRFN_CMD============CM005
      CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
    4 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM00Q
      CL_RSBK_PROCESS=>PROCESS_REQUEST
    3 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM002
      CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
    2 FUNCTION     SAPLRSBATCH                         LRSBATCHU13
      RSBATCH_EXECUTE_PROCESS
    1 EVENT        RSBATCH_EXECUTE_PROZESS             RSBATCH_EXECUTE_PROZESS
      START-OF-SELECTION
===========================================================
Thank you and BR
SF

Problem getting the selecteditem in tree while fetching data through httpserivces

I have a mxml file in which a want to display data in tree structure. The supplied to the tree is fetched from database through httpservice
the mxml file content is :
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete ="getMenu.send();">
<mx:HTTPService id="
getMenu"method="
GET"url="
http://172.17.26.55:7001/frmwk/MenuData"resultFormat="
e4x"result="resultHandler(event)"
useProxy="
false"
/>
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.collections.XMLListCollection;
import mx.events.CloseEvent;
private var companyData:XML = new XML;
private var Menu:XMLListCollection;
private function resultHandler(event:ResultEvent):void{
companyData = event.result
as XML;Menu =
new XMLListCollection(companyData.MENU);tree.dataProvider=Menu;
private function getSelected():void{
Alert.show(
"selected--->"+tree.selectedItem);}
]]>
</mx:Script>
<mx:Label text="Tree with XML data"/>
<mx:Tree id="tree" top="100" left="400" labelField="@title" height="224" width="179"dragEnabled="
false" dropEnabled="false" allowMultipleSelection="true"
/>
<mx:Button label="get Selected item" click="getSelected()" x="400" y="450"/>
When i try to get the selected item is is giving me null
Please help !!
thanks in advance.

How are you selecting the item? How many items are you selecting?

Sorting While maintaining data through SM30

Similar Messages

Maybe you are looking for