Sound Issues with new movie

Hi,
I just finished downloading a movie in SD Format, and when I was about to view it the sound appeared lagged, with a constant interference.
What can I do about this? This occurs even when I try to stream the movie.
Vicente P.

Hello vicenteparrae,
Thanks for using Apple Support Communities.
The following support article has troubleshooting steps for you to go through in order to resolve this audio/video sync issue.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Take care,
Alex H.

Similar Messages

  • Issue with new movement type created copy of 633

    Hi,
    We have copied 633 and 634 movement types and created a new 933/934.
    When we are doing Sales Order costing we are getting the below error.
    "No posting string can be determined in table T156SC"
    When i check, the entries in T156SC are identical for 633 and 933.
    No entries are there in table T156SY for both 633 and 933
    Entries are there for 633 in T156S, but no entries for 933. (The value string WA01 is available in this table).
    Can anyone please suggest how to resolve this ?
    Thanks,
    Sudheer.

    you may want to check KBA 2075521 - Error CK180 No posting string can be determined in table T156SC
    it talks about wrong customizing  and gives details for a correction

  • Sound issues with MacBook Pro

    I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section.  Any ideas?

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
    Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • Sound issue with apple tv

    hi ,
    I am getting sound issue with my apple tv recently. when you navigate around the apple tv menu, the sounds are there but when i try to play any video, the sound is not coming out. (Same with airplay)
    The issue can be fix with restarting my apple TV. However, i want a permanent fix. it's not APPLE product at all to always restart to get the apple TV to play sound.
    Anyone know any permanent fix? All the software are latest.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections 
    Recommended Wi-Fi settings
    Sources of Interference
    Wifi Diagnostic Software (for Mac users)

  • Vista SP 1 Sound Issues with Creative Drivers

    Hi all, I recently switched to a X-Fi Elite Pro, with a Nvidia Video Card.
    Windows Vista SP (32bit)
    Intel Pentium D .8 Ghz
    2gb RAM
    XFX GeForce 8600 GT 52mb running
    Creative X-Fi Elite Pro
    (it's been a while since I've needed this kind of support so let me know if more info is needed)
    Anyways, from the moment Vista plays the logon sound there is static crackling and chirping noises whenever there is audio playing at the same time as any kind of visual change on the screen (not every screen update). For example videos on websites that play them as plugins are especially static-y. However, playing a fullscreen game (i.e. World of Warcraft) does not produce the static.
    Interestingly, I have now tried two different video cards. The Nvidia and now a ATI Radeon, both have the same identical problem. I first thought that it might just be a Nvidia Issue but this is not the case
    I have checked for IRQ conflicts and none exist that I can find. I have updated Windows as much as I think I can. I've tried changing Creative drivers as well.
    Any advice is appreciated.Message Edited by djscotty on 0-04-2009 05:7 [email protected]

    Re: Vista SP Sound Issues with Creative Drivers [email protected]

  • Sound issues with ga

    hello, ill start out with the basics
    system
    AMD Athlon 64bit 3000+ .8ghz
    MSI Neo2 mainboard
    024MB ddr400 ram
    ati radeon 9800 pro 28mb video card
    soundblaster li've 24bit sound card
    I am having various sound issues with a few games i play, most notably FarCry and Halo PC
    Farcry is the main problem. about 2 minutes after opening the game, my headphones or speakers will flip out and produce a noise like a highly amplified dial up modem. I have already pursued help on the game forums, and had no luck. any help or suggestions would be appreciated
    thanks

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • Having sound issues with Mid 2011 iMac 27"

    Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X.  Could this the issue and if so how do I revert to 10.7.3

    It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
    Failing hard drive sounds

  • Has Apple addressed poor sound quality issues with new 160GB iPod classic?

    I just bought a new 160GB iPod classic, replacing a perfectly good 80GB iPod Video (5.5), thinking that the newer one would be superior to my 3 year old model. I discovered that the sound of the new unit was flat and muddy compared to the older model. I found that the 5th gen iPod video was more "spacial", if that's an appropriate word to use; the bass was more present and more clearly defined, as was the rest of the sonic spectrum. I searched several forums to research this issue and while there were numerous references to this issue, all of the posts I found referred to the original iPod classics (80GB and 160GB) and not the later 120GB classics nor the new 160GB classics like the one I bought. Has Apple done anything to address this issue since the first classics were released or are the new ones still suffering from the same sound quality issues as the original classics?

    Based on your observations here, they apparently have not changed the sound quality since the original 160GB classic. I noticed a clear narrowing of the sound stage (ambiance) between the 5.5G 80Gb and my 6G 160GB. You're describing the same characteristic. I don't own the newest 160GB version and came here today to see if it might have improved the sound quality back to the 5.5 spaciousness. Note that the 5.5G has a higher signal to noise ratio than the 6G, making it difficult for me to enjoy it through efficient balanced armature in ear monitors like the Shure SE530s or Ulimate Ears Triple.Fi 10s.

  • Surround sound problems with new 15.11 software

    Firstly I would like to give a big thankyou for getting the new IP recording software release out it is very welcome.
    Unfortunately this has highlighted even more the surround sound issue for me. All my tests have been done over optical (if anyone could repeat the tests over HDMI it would be very much appreciated just to see if there is any difference).
    Here are my findings so far with a small amount of testing.
    BT TV on Demand
    HD 5.1 movies appear to switch correctly
    SD and HD none multi surround movies appear to play in stereo from the start needing the menu/surround workaround applying to get surround sound as is the same for the tv box sets and kids on demand.
    IP Channels
    HD sports channels i.e. BT Sports 1,2 and ESPN (I have hidden the SD versions so haven't tested them) appear to a switch to surround sound correctly
    All other channels start in stereo and require the AD button on/off workaround to switch to surround sound.
    IP Channel Recordings
    Here lies the real problem for me now. Any IP channel recordings (not tested sports channels yet) start in stereo and require the AD on/off button workaround to switch to surround sound BUT as soon as you apply a fast forward or rewind when it starts to play again it has switched back to the stereo feed which is a much higher volume. I hope you can appreciate how annoying this gets that everytime you fast forward/rewind a recorded IP channel to sound switches and starts playing at a higher volume until the workaround is applied (everytime).
    Obviously the freeview channels all appear to switch and work fine.
    I am sure there is more to find but I just felt it worthwhile getting the issue highlighted AGAIN now the recording ability increases the visibility of this bug.

    Maybe slightly harse as with more testing I am not sure if this is a youview/humax issue and is a problem on the catchup player on youview retail also. I have added below to my first post slightly with a few more findings and some clarity. 
    When I say surround sound what I am talking about is the Dolby Digital track (this can be 5.1 or 2.0 but in 2.0 format my amp can encode that with pro logic 2 and make it sound like a reasonable surround sound track through my speakers).
    After testing through HDMI sound I find that this is even worse and in most cases will not transmit the Dolby 2.0 track at all even using the workarounds.
    The freeview HD channels work flawlessly as do the BT sports HD channels (all 3 inc ESPN) (non-HD freeview channels do not appear to carry anything but standard stereo so can't switch no matter what). If anyone has a surround setup check the difference in volume between channel 001 (BBC non HD) and channel 101 (BBC HD) this I believe is the difference between the standard stereo channel and the dolby 2.0 stereo channel.
    All IP channels (except sports) fail to automatically select the Dolby 2.0 soundtrack unless forced, as do the catch up channels (tested during programme playback as no Dolby during the adverts) and if recorded switch back to standard stereo everytime a skip/rewind step is made.
    Most on-demand content fail to switch automatically to the Dolby 2.0 track but can be forced with the exception of some HD movies with 5.1 soundtracks that appear to work without a workaround.

  • Earpieace / Sound Issues with Droid Razr M

    Having issues with my phone, bought new in September 2012, since yesterday morning. 
    When I make a call using the earpiece, I cannot hear it ringing (like dialing out to them) and after they answer, I cannot hear the person on the other end when they speak.  If I put it on speakerphone, they can hear me just fine and I can hear them.  Also on speakerphone, I can hear it ringing (dialing out).  When receiving a call, my ringtone audibly works, but then the same situation applies once I answer it - I cannot hear they, but they can hear me.  Again, if I put it on speakerphone, both parties can hear each other.  My alarm / ringtone works just fine, as well as all my other ringtone / notifications - such as text, etc.  But, if I try to play a YouTube video, play music through Pandora, or play another audio / video file with sound, it does not produce any sound, even through headphones attached to the jack.  It also plays sound when starting up - the "Droid". 
    Seems like a phone issue considering it is working for some things, but not for others.  I have gone through and checked all settings, tried it in safe mode, did reboots, etc, but all to no avail.  Anyone have any other troubleshooting suggestions, or are having the same problem?  It seems I have going to have to have it replaced - hoping this would be a manufacturers defect replacement though and not something that I should have to use my insurance on!
    Thanks!

    Hello Shelly41877
    I'm very sorry to hear your having volume issues with your device. Thank you for taking the time and providing us with all the steps you already done. Let's work together and get this addressed.
    Has the device been exposed to any liquid or physical damage? Is the device in a case? If so, please remove it and retest. If the issue persists please back up the device and perform a hard reset. Here's how: http://search.verizonwireless.com/?q=hard reset razr m&x1=p1&q1=support
    Please let me know if the issue persists. I look forward to getting this fixed.
    Joe_VZW
    Please follow us on twitter @VZWSupport

  • Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

    I have them go to the correct site:
    plugin download page on Interoperability Bridges.
    My only options are:
    1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
    2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
    Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
    This only pertains to any student who has never had Firefox on their computer prior to 11.
    Thanks in advance.

    I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
    13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
    I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
    Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
    Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
    Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Maybe you are looking for