Sound problem from before

hey .. thanks for all your help guys..
but i still can't get sound working ..
althogh there is some improvment .. i read all the manual's, especially the WIKI one.. alsa is working i can tell you that.. kde isn't giving me the error from before when starting it.
i added permission from the sound group and i can't even hear sound as root, i set all the volumes to 100% using alsamixer.
but nothing.. no sound, my chip is the CMI9739A, the alsa website doesn't have anything about it so i used alsaconf to configure..
my sound module is snd-intel8x0.
when trying to play something with xmms i get :
Message: fmt 5, channels: 2
and no error message..
i know my sound card works because in knoppix i could use it easily..
please helppp, thanks alot!

Please check bug tracking and mailing list archives from alsa project page like:
https://bugtrack.alsa-project.org/alsa- … id=0000110
http://www.mail-archive.com/cgi-bin/hts … s=CMI9739A
http://www.mail-archive.com/cgi-bin/hts … s=CMI9739A
It really sound's like hardware/alsa specific problem. I think that if you won't find an answer you can send them another bug report.

Similar Messages

  • Sound problems from iPhone 4

    My iPhone makes no sound for messages, incoming calls, keyboard or alerts. But, the alarm clock, music and ingame sounds work just fine.
    The phone is not on silent and the do not disturb mode is turned off. The problem continues when I connect headphones or any other external sound devices. I tried resetting the phone and cleaning the dock. None of the advice I found on the internet has helped me. The phone has suffered no damage, and is otherwise working just fine.
    I would appreciate any help!
    Thank you

    To rule out a software issue, try to set it up as new device and don't use the backup after that, explained in this article:
    How to back up your data and set up as a new device
    If the sound comes back, restore from the backup. If it does not, get it serviced:
    Apple - Support - Service Answer Center

  • Problem with sound delay from mic to speakers with quickplay on HP Pavilion dv5-1145ev

    I have an HP Pavilion dv5-1145 ev. When I try to use karaoke with HP's quickplay there is a significant sound delay from the microphone to the speakers. I also noticed the same delay, even when I am recording my voice with other programs such as audacity. There is a voice delay too. I have windows vista and I have tried to change the settings of the sound from control panel, without any luck. Any suggestions please?

    I have an HP Presario CQ61 that I bought to record my own music in tracks and it's useless to me because I have about a second delay from the mic to my recording program and headphones. You would think that with all the brainy knowlage Bill Gates and the computer industry has someone can come up with a downloadable fix for this problem. If I knew I would have this problem before I bought the thing I wouldn't have wasted my money.  If anyone finds a fix for this please let me know.

  • Mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

    mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

    Hi
    It's likely your fan,  It always runs on a MBA.  Mine is very quiet, others report some noise - here is one link.  There are lots of others.
    Hope this helps
    Cheers
    https://discussions.apple.com/thread/4381367?start=0&tstart=0

  • I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    Apple's response to my email:
    "I understand that you can't update your apps using your iPad.
    Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
    Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

  • TS1425 My iPod Classic was working fine all day.  Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod.  I've used both headphones and a docking station.  The songs don't even begin, they just skip to the next one. 

    My iPod Classic was working fine all day.  Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod.  I've tried both headphones and a docking station......nothing.  The songs don't even engage, they skip to the next one.  I've tried rebooting the iPod and still nothing.  Any ideas?
    Kim

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • Hdmi sound problems with m9150f in media center

    I am running a pavilion m9150f Q6600 vista 32 bit and GeForce 8500 gt graphics on a sony wega 55" lcd projection tv. Recently I have been having problems with media center sound. Recorded programs from standard channels (2-64) seem fine but hd channels (1341, for example) produce an error message stating "Unsupported Audio Signal. Please check device output." Which kills all sound from Pc. After shuffling through various output options, often returning to the original settings, and occasionally reinstalling devices or drivers, the problem is fixed. Then, seemingly at random, POOF!, error occurs again.I am at my wits end and am ready to throw my PC out in the street and hit it with a bus! Please help prevent its untimely demise.
     Thank you.

    Hi again
    I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
    (I have chosen the driver for Vista!!! I suppose you use Vista???)
    There is a folder called sound. Access this folder and run Setup.exe
    But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
    After this sound driver removing you should start the new driver installation described above. (setup.exe)

  • No sound output from dock connector or headphones but speaker is fine

    I've got a 3GS which I've had since October.
    Recently, there has been no sound output from the headphone socket - or rather, what does come out is very strange, sounding almost electronically distorted.
    I thought that maybe the headphone jack was broken, but now I've found out that the same thing can be heard through a dock when the iPod is connected this way.
    I'm fairly sure the dock connector is still fine as the phone charges and can be controlled by the dock etc
    Most of the discussions I've found relate to sound not coming from the speaker on the phone, but this is absolutely fine.
    Any ideas?

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • When I'm trying to download an app, it says that I have a billing problem from an earlier purchase so I can't download anything. How can I fix it?

    Whenever I try to download or redox load an app, a sign says I need to sign in. I do, but it then says I have a billing problem from an earlier purchase and I don't have money on the card so I can't put anything even though I tried. How can I get rid of the card on my ipod?? 

    Sounds like you have an outstanding balance. You have to pay that of before you can make purchases, even free ones. Add a valid payment method to your account
    Why can’t I select None when I edit my payment information?
    If you want to contact iTunes
    Contact iTunes

  • Please Help - sound problem

    After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
    Any Ideas????
    [Edited by: admin on 02-Apr-05 15:40]

    Hi Nick,
    Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
    To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
    1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
    2. Check Software. This is where the fun begins.
    2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
    2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
    2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
    2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
    2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
    2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
    HTH

  • Flash sound problem in wondows 7

    i have some problems with Mozilla from the last update
    my OS is windows 7 ultimate ( with all the updates )
    the problem is with sound in flash ( like YouTube )
    if i open Mozilla and open a YouTube URL its all OK until i change the sound settings from this place ( if i add or remove bass boost or other ) after i change and apply the settings there is no sound
    before the update in the volume mixer there was NO Mozilla Firefox it was just plugin Container for Firefox and it was all OK now there is NO plugin Container its just Mozilla Firefox and i have no sound if i change the settings
    before the update i had no problems with the sound if i changed the settings now if i change the settings i need to restart Firefox to have sound
    here are some prints to see what is all about:
    http://img192.imageshack.us/img192/415/11111tg.jpg
    http://img819.imageshack.us/img819/5963/22222222222c.jpg
    http://img834.imageshack.us/img834/2900/settingsdp.jpg
    Alex

    Yes I am having issue with streaming media....CDs and MP3 works fine. 
    which streaming issues?
    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

  • IMovie sound problem - a solution discovery

    After downloading a video in iMovie and completing all the processes steps that I wanted to include, I tried to burn this project in iDVD. A problem arose with the sound when I played the iDVD preview. The sound was grabbled and distorted. I contacted AppleCare and got several possible solutions, but none of these solve my sound problem. I even tried to send it back to my camcorder and use my older G4 computer to make a DVD. However, the program could not be transferred to my camcorder either.
    Now a strange discovery was found. On the sound line in iMovie (where I had recorded my voice program) was a small yellow dot. Yes, very small yellow dot. I wondered why this was there and clicked on it. The dot move up to the top bar where my video clips were stored. I thought maybe this had changed things, so I rendered the program to iDVD again and previewed it. The sound problem was gone. I successfully burn the program to DVD and found it was okay to view. I have shared this discovery with AppleCare and was asked to share this information in this discussion forum. I hope that others may benefit from solving a similar problem. I still don't know how the tiny yellow dot got on my sound line. If somebody knows, it could be interesting and helpful to avoid this problematic yellow dot. Good luck - Seapark36

    Welcome to iMovie Discussions!
    Thanks for mentioning this business of the "..very small yellow dot".
    This sounds like a 'Bookmark'. Bookmarks can be placed on the Timeline, where your video plays, along the bottom of the computer's iMovie display, by purposely - or accidentally! - pressing the Apple key and 'B'. Bookmarks let you jump instantly back and forth through your movie (..to the next Bookmark..) by jumping forwards to the next one with Apple and ']', or backwards to the previous one with Apple (..also known as the 'Command' key..) and left-square-bracket '['.
    They have, though, been known to interfere with proper playback when exporting (..'Sharing'..) to tape or to iDVD, so Karl's advice has been to delete all bookmarks when the editing's finished and just before 'Sharing'. All bookmarks can be instantly deleted by going to Markers on the top line menu and clicking Delete all Bookmarks.... (An individual bookmark can be deleted, once you've jumped to it, by pressing AltAppleB.)
    The little diamond-shaped dots look almost identical to Chapter Marker diamond dots, which you can create by clicking the 'iDVD' tab at the lower-right beneath the right-hand 'pane' of the iMovie window and then clicking 'Add Chapter'. That creates a chapter marker to separate a particular section of your movie when it plays back from a DVD you've burned.
    The Bookmarks and Chapter Markers seem (..to me!..) to have a very slightly different colour - maybe one's green and one's yellow: I don't know; I'm red-green colour blind, so I can't tell yellow from green, or green from red!
    So perhaps you accidentally created a bookmark by unintentionally tapping the Apple key and then the letter 'B'. Removing it, and all other bookmarks, is generally acknowledged to smooth the process of exporting (..'Sharing'..) a movie project.
    Thanks for posting your observation, and reminding us about how important it is to delete bookmarks before exporting!

  • TS2090 Apple TV mirroring - sound problem. Tried everything. It's ****.

    I'm feeling totally exasperated. I've tried every 'solution' to the inherent Apple TV mirroring sound problem. Why don't Apple just fix it?? All I want to do is be able to view my computer video with sound when i want to. I don't feel that I should have to spend up to and over an hour trying repeated combinations of turning things on and off, entering code into Terminal, etc. EVERY TIME THAT I TRY TO MIRROR THROUGH APPLE TV. It's ridiculous, aside from the cost of buying the unit, I had to upload Mountain Lion despite the fact that my new (Early 2012) imac should have been on spec. That took hours and it still doesn't work. Very dissappointed, Apple have lost my brand loyalty for such an obviously fixable thing. ( I don't think that they read these comments). hope this makes you think twice before buying.  Yours, m

    I found a fix for this problem thanks to a friend of mine who I can only assume did a little research online!!
    The problem I had was having AirParrot once installed, and after the recent 10.9.2 update, the third party app messed up the way Mirroring was working..
    Here is the fix:
    1. Open Terminal in /Applications/Utilities.
    2. Run these commands respectively:
    sudo rm -rf /System/Library/Extensions/APExtFramebuffer.kext
    sudo rm -rf /System/Library/Extensions/AirParrotDriver.kext
    sudo rm -rf /Library/Extensions/APExtFramebuffer.kext
    sudo rm -rf /Library/Extensions/AirParrotDriver.kext
    This will uninstall kernel extensions related to AirParrot. Other solutions around the web being posted are missing the extensions within /Library/Extensions.
    3. Enter your administrative password when prompted.
    4. Restart your computer.
    I tried it once again and it worked like a dream!!!
    Here is the article for reference:
    http://9to5mac.com/2014/02/28/os-x-10-9-2-breaks-airplay-mirroring-and-desktop-e xtensions-to-external-monitors-for-some-users/
    Many Thanks for all who tried to help, and especially Wasim!!
    Hope this helps anyone with the same problem in the future!!

  • Sound Problem Plus Memory Problem

    I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
    Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
    Windows 7 64 bit Home Edition
    EVGA P55 FTW Intel P55 Socket LGA56
    Intel Core i5-750 2.66Ghz 8M LGA56 CPU
    Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
    Ultra LSP750 750w Power Supply
    Seagate TB Serial ATA HD 7200/32MB
    Cooler Master HAF 932 Full Tower Black Case
    Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
    BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
    PROBLEM ONE:
    This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
    PROBLEM TWO:
    The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
    ps.
    This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
    Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

    Hello,
    cannot help with the sound problem.
    For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
    Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
    Make a clear cmos. Then boot the computer with only one stick of ram in the port .
    If everything is fine, turn off and add the other port of the same color for dual channel.
    If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

  • Pp 2.0 and Windows 7 sound problem

    I received the error "The currently installed sound card driver does not support direct sound input. Recording is not possible." I tried many of the solutions offered on forums. This is what I found worked for me. (I have an HP with realtek hd audio)
    I plugged in external speakers.
    In adobe I went to Edit, Preferences, Audio Hardware, selected Pp windows sound, clicked on ASIO settings. For direct sound output ports I only have speakers selected and  "Yes" for sync reference. For direct sound input port I have stereo Mix selected and sync reference no. To the left I have "Direct Sound Output", "Full Duplex", and "Start Input First" selected.
    In my computers control panel under sound I have "speakers" selected as my playback and "stereo mix" selected as my recording.
    I hope this helps others who like me are not computer savvy.

    Thanks! Though I upgraded to solve the problem, this is good to know.
    Bob
    Date: Wed, 9 Nov 2011 04:45:42 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
    Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
    VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
    Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
    AND NOW YOU CAN USE PREMIERE PRO 2.0
    Enjoy
    Steve - Italy
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for