Pp 2.0 and Windows 7 sound problem

I received the error "The currently installed sound card driver does not support direct sound input. Recording is not possible." I tried many of the solutions offered on forums. This is what I found worked for me. (I have an HP with realtek hd audio)
I plugged in external speakers.
In adobe I went to Edit, Preferences, Audio Hardware, selected Pp windows sound, clicked on ASIO settings. For direct sound output ports I only have speakers selected and "Yes" for sync reference. For direct sound input port I have stereo Mix selected and sync reference no. To the left I have "Direct Sound Output", "Full Duplex", and "Start Input First" selected.
In my computers control panel under sound I have "speakers" selected as my playback and "stereo mix" selected as my recording.
I hope this helps others who like me are not computer savvy.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
Please any help because i dont know what to do any more..
My best regards

Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

ITunes and Windows Vista problem

I have Windows Vista and ran iTunes successfully for 8mos. Now I'm getting a message box that says "iTunes has stopped working. Close box and Windows will send a solution." The solution, upgrading Windows, doesn't work. Is Vista the problem?

Scan and Fix windows System files:
Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair or update files.
Start iTunes again

Iphone 5 and windows 8 problems

I am having syncing problems with my iphone 5 and windows 8.

whats your exact setup as in how do you do it?
what do you do?
what result do you expect?
what result do you receive ?
how does what you receive differ from your expectation?

T430u and Windows 8 Problems

Hi everyone,
Really need some helps here. I bought a T430u , and to be honest, i'm rather dissapointed with this. My keyboard was dead in a matter of weeks, so i've just get it back from the sevice centre. And now I have another problems:
1.Cannot wake up from sleep
I've read on another sites that I have to disable expresscache and quick start, but then it'll make the ssd caching useless isn't it? And yet after I uninstall expresscache and disabled quick start, it still doesn't solve my problem. Now it'll wake from sleep but will crash and restart.
2.Glitchy trackpad
On some occassion, the trackpad just stop working for 1 - 5 minutes. And then it'll work again. Now I mainly use mouse, but seriously...
I've upgraded all the lenovo driver and windows update too. But it doesn't solve anything...

Hi centraldogma,
Welcome to Lenovo Community. I'm assuming that the system is still under warranty. I would suggest calling Tech Support to see if they can help you troubleshoot the problems. If that doesn't help perhaps they can advise about the last option of returning the system.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Adobe Acrobat 5.0 and Windows 7 Problem

How do I get Adobe Acrobat 5.0 and Windows 7 compatible so I can access my attachments to e-mails sent to me?

I was successful in installing AA5 in Win7 Starter as a test. It works except that I changed the printer port to file (AcroTray or the Distiller Assistant of AA5 does not work in Win7). You can open the files that are created in Distiller to create PDFs. You may be able to use watched folders to automate the process to some degree.
I suspect that your question is more of having problems reading PDF files in AA5. That is a different issue. It is not a Win7 compatibility issue, but one of needing a newer PDF viewer. I have AA5 on one XP machine that I use Reader X on for seeing the newer files. I do have to deal with some conflicts between AA5 and ARX, but I can deal with that (many folks lose there minds on that).
There is one other option that might be a major problem. Many folks are getting Win7 on 64-bit machines. In that case, you will have to be sure AA5 runs in 32-bit compatibility.
At least that should give you some ideas of what might work. If a 64-bit machine, you may definitely have a problem -- I never tested that combination.

Primairy IDE and Windows Install Problems!

Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
I orderd all my stuff from newegg.. I got:
Intel 775 Socket 2.8ghz Prescott
ECS Mobo (psh model)
2x 512mb DDR 3200
Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
Chaintech GeForce 6600 GT video card
Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
Aspire-X Dreamer II Case
Rosewell DVD/CD-RW combo (very cheap).
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet ".
When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
What the hell?
I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
Has anyone else had any errors like this? Thanks - Erik

you skiped the part about him buying the msi board.
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem. I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

Audigy 2 ZS Platinum and Windows 7 problems

Hi there,
Recently upgraded to a new PC and Windows 7, and am gutted that the audio/interface card no longer seems to work. I mean, it works for simple listening duties, but the Line In/Mic, "What You Hear" etc., are all registered as "currently unavailable". I home record a radio show, so I'm in a panic to get the card working properly. I'd have to downgrade to XP.
The current drivers available are listed as working for Windows 7 on the Creative site, not sure they should be up when they don't.
Any sign of a resolution for this, or ideas what I could do?

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

Windows 7 and surround sound problem

Hi,
I have recently installed Windows 7 Ultimate x64 edition on my desktop PC.
I have Creative Audigy 4 Pro with the external panel and Creative Gigaqworks S750 speakers.
The problem is that the speakers play only in stereo mode (only front 3 speakers) although I have set the speakers to play in 7. mode from audio console and speaker settings.
Whether I lsiten to music or play games it's the same.
Please note that I have downloaded and installed the latest drivers from creative website (Creative Sound Blaster Audigy series driver 2.8.00).
Any ideas anyone how to fix this?
Cheers

(? Hi mate,
I was lucky enough to find the solution to the problem quite fast thanks to a reply in another forum.
All you need to do is download SB Audigy Series Support Pack 3.6 (/09/2009)
The link to get more info about these modded drivers is here:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]
The link to actually download the drivers is here:
<a rel="nofollow" target="_blank" href="http://www.supashare.net/nn2jkorp6yz"]http://www.supashare.net/nn2jkorp6yz[/url]
<a rel="nofollow" target="_blank" href="http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe"]http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe[/url]
Hope this helps
Cheers!

PSE 7.0 - importing videos as .avi and having sound problems

I am doing a slideshow with mainly pictures and want to include a few videos in my slideshow as well. I have imported the .avi videos and they are inserted after the pictures. The pictures are set to a song and then the song has stopped and I have the slide show set to NOT continue to play the song till the end. The problem is the videos have no sound. When I open them in windows media player though they are fine. Any suggestions?

Export the AVI as WMV in window movie maker and import the WMV in slide show then export as wmv. Lots of codec are using in different format it could be an issue of audio codec using in AVI file.

Networking between iMac and Windows / iTunes problem

Hey Guys,
I've recently got an iMac 27" i5 and I'm having a few issues with the networking performance. I'm using the gigabit ethernet port (AirPort is off) into a gigabit switch. Also plugged into the switch is a Windows Home Server (WHS) machine also with a gigabit connection.
Both my iMac and WHS are showing on the switch as being connected at gigabit speeds. I also have Parallels 6 installed on my iMac so I can test the performance of Windows 7 on the same hardware (albeit with the overhead of the virtualisation layer). In parallels the networking is bridged onto the default adaptor rather than being shared.
iMac file copy
iMac ftp from WHS 4.81 MiB/s
iMac Parallels Windows 7 ftp from WHS 4.5 MiB/s
I also have constant problems with iTunes locking up, hanging, showing the spinning wheel (all my media is on the WHS machine).
Does this sound correct or should I be getting better performance than this?
Thanks
James

gsaab wrote:
As a relatively new Mac user I'm not sure how the networking function works. I have a large iTunes library... 150GB+. What I'd like to do is to keep the library on my iMac, but be able to access it using a MBA.
have you considered using _*Screen Sharing*_ ?

Unknown Device ipod Classic and Windows Vista problem??

Help!! My ipod Classic is not being recognized by my computer. I have read the previous articles and tried the solutions but I continue to get the result "Windows has determined that the driver software is up to date" I continue to get the error noise when I plug the USB in and the Device manager continues to say "Unknown Device" It seems others are having this problem, how do I fix this?

I am having the same trouble with mine, and I can say that it isn't iTunes, I plugged my brothers iPod Nano in and it worked like a charm, but when I plugged my iPod Classic 160g in all it says is it is an "unknown divice". It isn't Vista either as the same thing happens on XP Pro as well, so all I can think of is it is a error on the Classic itself. I just wish someone can help out so that I can use my ipod!!!! Come on Apple!!!! Solve this problem!!!!

Iphone and Windows Vista problem

Okay, so I have windows vista and the iphone seems to be having a hard time with that.
When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?

Same exact problem!
Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
Please help me become an Apple customer.

Pp 2.0 and Windows 7 sound problem

Similar Messages

Maybe you are looking for