SPA-1X10GE-L-V2 AND 4-10GBE-WL-XFP SUPPORTED FEATURES
Hello!
I am trying to find documents that prove the following:
4-10GBE-WL-XFP (with CRS-FP40 and XC-L2L3VPN)
SPA-1X10GE-L-V2 (with CRS-MSC-40G-B AND CRS1-SIP-800)
FEATURES NEEDED:
-802.1q encapsulation for L2VPN (EoMPLS & VPLS), L3 and L3VPN
-802.3ad and QinQ for L2VPN (EoMPLS)
-Support complete separation of QoS EXP, TOS, DSCP per interface
-Support complete separation of QoS EXP, TOS, DSCP per VLAN.
I am still researching to see if I can find supporting cisco documents.
Thanks in advance,
Rodrigo
Hi Rashed,
I see that your list includes Cisco Insight Reporter and Cisco Service Control Subscriber Manager. Those are SW pieces which will require some servers to run them. You can review the following documents to have an idea of the SW and HW requirements for the servers required to run those components:
- Insight:
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/insight/rel34/install_guide/insight_34_ig.pdf
- Subscriber Manager:
www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel38x/smug/Installation_and_Upgrading.html
If you have any doubt, I would strongly suggest you to reach out to your local Cisco Acount Team for these type of questions. They will be able to provide you proper support and guidance for these type of inquires.
Best regards.
Similar Messages
-
Is Handoff and not available for iPad. feature is NOT showing in settings
Downloaded iOS 8 on my iPad 3 and iPhone 5s. The Handoff feature is present (under Settings=General) on the 5s and enabled. The iPad doesn't even display the feature, as if it's not there or even available at all. Anyone else having this issue? I've restored once and re-downloaded iOS 8 with the update, yet still no Handoff!
Continuity features are available on iPhone 5 or later, iPad (4th generation), iPad Air, iPad mini, iPad mini with Retina display, and iPod touch (5th generation).
https://www.apple.com/ios/whats-new/continuity/ -
trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'
tiburon77 wrote:
trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
I am trying to uninstall itunes and I received a message: The feature you are trying to use is on a network resource that is unavailable.
Refer this link here:
https://discussions.apple.com/thread/4029492?tstart=0 -
I purchased an album with 11 tracks from the Store. When the download was complete, I edited the name to make it easier for me to find. I then synced my iPod and iPad with the new album. However I found that one of the tracks was defective and after writing to the support community, a second download was setup and this fixed the bad track. I was surprised that when the track downloaded, it went to the track with the new name. However it works perfectly on my computer. For some reason, the iPod and iPad have synced a few times but the track for this album on these is the original track with the defect and this has not fixed, though there have been multiple times that it has synced. The laptop with its corrected track works fine.
The message from support told me to be sure that the software on my laptop was the current version and I did correct this before getting that corrected download. However I notice that my iPod says that it has the latest version and won't check for an update until 2/24.
Can you help me figure this out. I thought if I could delete this track off the iPod and iPad that it would sync the correct version, but I can't see how to delete these.
Thanks for any help you can offer.Assuming you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
I have owned an iPhone just 3 months, and been trying to be optimistic about it, and give it a chance, but I see this site is not run by Apple technicians. Thought I would have some support after taking the time to log in, and ask a question, hoping there might be a chance, that my problem could be fixed, but what are the chances of anyone seeing my question??? I saw the same question, poor lady had asked it back in Dec, of 2011...NO ONE ANSWERED HER!!! Nothing about the iPhone has convinced me to stay with it, it's too fragile, U loose data when Ur phone is locked, and there is no customer support!!! Thank U very much, but I will go back with Blackberry or maybe I will go with the new Galaxy... at least I will know when I lock my phone, it is in fact locked!!! I can't get over the LACK of committment given to customers here, when they apparently take the time to come online, and go through all the nonsense of making a username, when there are no intentions of anyone from APPLE here to give support...it says support and after all is said and done, it's simply a chatroom!!! Have a no chance of anyone seeing Ur question, have better chances of finding an answer on facebook!!!
This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance -
Re-assigning a retail license for Office 2010 Home and Student - any charge for support?
I want to re-assign one of three licenses for Office, but I went to the Support website, which prompted for the product ID and indicated that the "free support"period had expired, presumably because it is 12 months since I first installed it.
Can the reassignment be organised at the time of activating on the new computer by phone? Would a person be speaking with a human if doing a phone activation? Will there be a charge and what's it likely to cost?
I also have a suggestion for Microsoft: a de-activation routine that would enable the license transfer process without the need for human support.Hi
Normally Office for a retail version can only be activated once at a time in one computer, Office 2010 Home &Student can be installed on three machines.
If you have used up your activation times and want to transfer your Office to a new computer, contact Microsoft Customer Service and they will help you to activate your Office in a new machine:
http://support.microsoft.com/kb/295539/en-us
Tylor Wang
TechNet Community Support -
why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook
These are user-to-user forums, you are not talking to Apple here.
If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?
Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5 -
HP LaserJet and Color LaserJet - Windows 7 support
To help customers successfully use their products with Windows 7, HP has identified recommended drivers per product. Please visit the following support documents for more information:
HP LaserJet and Color LaserJet - Windows 7 support
Deskjet, Officejet, or Photosmart
If you are having an issue with a windows 7 software install or driver, please start a new thread for greater visability.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted SolutionNot to be confused with the title of this thread, because this tool will not work with installing most LaserJets, but try the HP Printer Install Wizard and let me know any error messages you get.
I will need to know quite a bit of information before I can be of much assistance, otherwise:
1. What error messages are you getting (ex. fatal error 1603)?
2. How are you trying to connect the printer (USB, wireless, etc)?
3. What happened when you used the HP Print and Scan Dr?
Lastly, If you do not answer these questions and others I know I will have, then I wish you the best of luck with your printer installation. Do not be mislead, just because I do not work for HP doesn't mean I'm not an expert.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
In sm_crm automatically populate service and response profiles based on support team
Hi All,
i have a requirement that in SM_CRM transaction while creating a incident user wants to automatically populate service and response profiles based on support team name.
i have checked for BADI's but dint find any which automatically populates service and response profiles at the time of creation of the ticket.
Kindly help!!Hi Shaswat
This doesn't work as mentioned in the wiki page and SLA doesn't get determined by the org unit or support team via customizing.
We reported this to SAP and got a feedback that this is not supported and will be removed in future from the access sequence.
Therefore the only option is to implement badi i.e. crm_sladet_badi and use BADI determination in ur acess sequence to call this badi.
hope this clarifies
Thanks
Prakhar -
If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.
-
I need to install this remote application on my IPOD with IOS 4.2.1 and I is not more supported!!!! help me please!!!! I need to download an old version of remote app!!!!
Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?
-
Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ...........-HP
System Manufacturer Hewlett-Packard
System Model HP ProBook 4530s
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version 2.6
Windows Directory C:\windows
System Directory C:\windows\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ...........-HP\................
Time Zone South Africa Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.94 GB
Available Physical Memory 1.00 GB
Total Virtual Memory 7.87 GB
Available Virtual Memory 1.25 GB
Page File Space 3.94 GB
Page File C:\pagefile.sysTo clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK
-
Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?
A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.
Maybe you are looking for
-
I just installed a second, larger hard drive. Can I copy all of the files?
I have a G5 Tower with an 80GB Seagate hard drive. I just installed a 160GB Seagate in the second bay. It seems to be connected. I partitioned it. Can I now simply copy everything that was on the old hard drive onto the new one? Do I then tell the co
-
Slides won't load in my imbedded web gallery.
I followed the directions for embedding a Slideshow created in Bridge CS4 into an existing website using David Powers' excellent tutorial (http://foundationphp.com/tutorials/gallery/embed2.php). Everything displays beautifully, including my existing
-
Hi, I have purchased Adobe Acrobat 9 and have the serial # for re-install, however after downloading Acrobat 9 it says that my serial # is invalid. What am i doing wrong? Should i install the trial version and update from there?
-
Test Restore Database Instance from Cold backup
Hi - I have a customer who is using an Oracle database instance not in archivelog mode currently, I have managed to persuade them to backup at least weekly using an RMAN cold backup. Prior to my being allowed to do anything else they want to perform
-
Performance monitor counter alert stops working during run
I've created a counter alert whenever the processing time of a specific process falls below a certain threshold, so that a email would be sent to me through task scheduler. I had tested the set up by turning off the process and checking to see whethe