SPA303 Provisioning over SSL with Client Verification problem

Hello,
We use DHCP (66) HTTPS URL for provisioning and initial configuration of SPA303 phones.
When Client Verification is enabled - the phones fail to authenticate to the web server and provisioning fails. It works perfectly when Client Verification is disabled. Debug logs and ssl traffic sniffing revealed only that the phones fail to authenticate properly with the built-in certificates to the server.
The server certificate passes validation (Cisco issued), however, since no full CA chain is availible from Cisco - we can't be completely sure it's valid.
Server side is Apache, the SSL conf is as follows:
SSLCipherSuite HIGH:!SSLv2:!ADH:!aNULL:!eNULL:!NULL:+MEDIUM
SSLCertificateFile /usr/local/apache2/conf/ssl/conf/ssl/pserv.dom.com.cert
SSLCertificateKeyFile /usr/local/apache2/conf/ssl/conf/ssl/pserv.dom.com.key
SSLProtocol All -SSLv2
SSLVerifyClient require
SSLCACertificatePath /usr/local/apache2/conf/ssl/conf/ssl/
SSLCACertificateFile /usr/local/apache2/conf/ssl/conf/ssl/combinedca.crt
Could it be a problem with the server conf or certificate(s) issue?
PS.
We followed those to obtain the certs:
https://supportforums.cisco.com/docs/DOC-9852
https://supportforums.cisco.com/docs/DOC-12709
Any ideas appriciated!

SOLVED!
I solved the problem.
The key to the solution was the ifolder39_admin.pdf - page 226.
Best regards
Andre

Similar Messages

How write rmi-iiop over ssl with weblogic server 6.1?

Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
First off 1.4 isn't supported as yet. That is probably part of the problem.
You also must use a corba URL from the client in order for this to work for instance:
If you are using WLInitialContextFactory:
corbaloc:iiop:localhost:7001/NameService
If you are using CNCtxFactory:
iiop://localhost:7001
Using rmi: is the wrong thing to do - that will use jrmp or t3.
However, I suggest that you raise a call with support since there is
some other trickiness with getting SSL working. We hope to have this
much improved in SP2.
andy
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

How write rmi-iiop over ssl with weblogic server 6.1 - No server found

//New
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
The SSL support is poorly doc'd right now. We have fixed this and
updated the way you do things in SP2. Please either wait for SP2 or
contact support.
andy
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

ACE end-to-end SSL with Client Authentication

we have a need to perform an end-to-end SSL with the ACE doing client authentication. Is there a mechanism to allow the ACE to inspect certain fields in the user certificate? All I see are checks for signature, validity, expiration, etc. Nothing that would allow me to inspect a user cert field such as "OU" and take an action based on content of the field.
any ideas? thanks
Bob Overberg
RABA Technologies
SRA International, Inc.

Thanks for the quick response. Is there another Cisco device that does have those capabilities?
thanks.
Bob O.

Using SSL with client auth from a JNLP-launched app

We have an application that is launched by JNLP, and which needs to make a mutually authenticated SSL connection to a server. The client cert and trusted certs that it needs to do this are stored in the Sun\Java\Deployment\security directory where JNLP knows to look for them. And Java WebStart itself seems to be able to use these certs just fine. However, our app seems blithely unaware of the location of the keystore/truststore unless we explicitly set the system properties javax.net.ssl.keystore and truststore. But we don't want to do that (it could be different for different users), and we shouldn't have to do that. So the question is, how can we use the same KeyManager/TrustManager that Java WebStart itself is using? Are they somehow available for the JNLP-launched app to use?
Failing that, is there a way for a JNLP-launched app to query the deployment properties? There are a bunch of properties to direct the behavior of Java WebStart (see [http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html]), such as deployment.user.security.trusted.cacerts. These don't seem to be System properties. Can the app see them, or are the "private" to Java WebStart itself?

HI:
see also shine enterprise pattern.
I have worked with it and it helps me and results spead up.
it has a class which is named "code" and does encryption and ... by md5. it is incredibly secure! tey it.
you can download it via links bellow:
http://groups.google.com/group/j2sos.
http://sourceforge.net/projects/shine-enterpris/
it has also document

Does XI support FTP over SSL with Command AUTH TLS??

Hi All,
Can we change Command AUTH TLS to AUTH SSL in the Command Order of receiver FTP adapter when you select FTPS (FTP using SSL/TLS) for Controal and Data Connection??
We are able to transfer business documents to bank's FTP server (Following RFC 2228 standards) using WS FTP Pro (I think follows RFC 959 and 1123 standards) which using AUTH SSL in Command order.
We did go through SAP note 821267 (FAQ for XI 3.0 / PI 7.0 File Adapter)...question number 33 address about the "AUTH TLS" command. But we not getting the same error. We get different as in this forum:
Re: Error: Message processing failed: FTPEx: PBSZ=0
Can someone please confirm if this is the issue with FTP RFC standarads?? Or can we coustomize FTPS adapter to send AUTH SSL command??
Thank you,
Indrasena Janga

Dear Andy,
I am also looking for the same information.
Could you please share with ,if u have got anything related....
Hi Experts,
Pls share your exp with us if u have any....
Regards,
Srinivas

Http service over ssl with IE8 not working works in all other browsers

Hi,
The web server is running ssl (https) and the server as a valid certificate. The main swf loads but then I make a http service call to a relative address on the same server for some database information I get an IO error
This works fine in all browsers except internet explorer, however IE will work if I don't use ssl and use normal http.
Is there a setting in IE that would allow this, is there a known issue and better still a workaround. I have tried trusted site setting and everything else I can think off.
TIA
Harry

I had this problem, and it was related to the way IE8 handled ssl certificate revocation checking. I had to turn off the check box in IE8 options that told it to check for revocation.
Mark

Failed to use LDAP over SSL MUTUAL AUTHENTICATION with some Directory enable SSL.

In iPlanet Web Server, Enterprise Edition Administration's guide, chapter 5: secure your web server - Using SSL and TLS protocol specifying that the Administrator server camn communicate LDAP over SSL with some Directory enable SSL.
Is there any way to configure iplanet Administration server to talk ldap/ssl in mutual authentication mode with some directory?

Hi,
Sorry, I could not understand what your are trying to do with iWS.
Could you please berifly explain your question. So that I can help you.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Web Service, SSL and Client Authentication

I tried to enable SSL with client authentication over a web service. I am using App Server 10.1.3.4.
The test page requires my certificate (firefox asks me to choose the certificate) the response page of the web service returns this error:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 405 Method Not Allowed
Has anyone used web services with SSL client authentication?
Any clue why?
Regards

Any comment?
Thank you.

Does Flex HttpService support https with client authentication

Hi,
We have a set of backend services available over https with client auth (cert based). We need to use mxml HttpService to access these backend services. Does HttpService support ssl with client auth?
Another question is, for Https does flex share the browser keystore and certstore or uses its own?
Thanks,
Debashis

Yes , a flex HTTPService can access services on https://. But if I remember correctly , to use an https:// service , the swf has to be served on an https. Example ,
Served from https:// ... --> Can access https:// ...
Served from https:// ... --> Can acess https:// ...
Served from https:// ... --> CANNOT access https:// ...
Served from https:// ... --> CANNOT access https:// ...
Since Flex has the browser do the connecting , the browser handles the keystore stuff , not Flex. I think.

SSL, 128-bit encryption problem

Hi
I need to establish a connection over SSL with 128-bit encryption from my
client application to Active Directory. But when a connection is established
I look at the System log and see the cipher strength is only 56.
Does anybody have an idea how can I raise the cipher strength?
Thanks

Sorry,
It was my fault. I used 56-bit SDK. After upgrade all is perfect.
"Gennady" <[email protected]> wrote in message
news:9mgd4d$[email protected]..
Hi
I need to establish a connection over SSL with 128-bit encryption from my
client application to Active Directory. But when a connection isestablished
I look at the System log and see the cipher strength is only 56.
Does anybody have an idea how can I raise the cipher strength?
Thanks

WS security, SSL and client auth

Hello all,
I need to secure a web service using SSL with client auth (client has a certificat issued by the web service provider wich he can use to access it... i suppose).
Being a newbie i have no idea what are the options and how to implement them.
If good tutos are available on the subject it would be nice.
I also had another question: with a web service, what guarantee do i have that the client has consumed the web service and received the information he wants etc., it is critical for me to know that everything went ok...
Cheers

Hi
One of the best books I found that covers security is located at:
http://www.lulu.com/content/214643
You will, or get you company to :), buy it (it's not expensive). It covers axis1.3, note that axis2 is out, but since your just starting with web services this will be a very good start on many of the concepts and how to implement them.
Should you decide to use Axis give it's documentation and many tutorials a look, the main site is: http://ws.apache.org/axis2/
Re: getting a guarantee, I might be wrong, but I do not see how this can be done with services and to be honest with any other type of application (especially the "received the information he wants" bit). The only way I can think one to do this is to include it as part of the SOP (standard operating procedure) for specific functionality in your application. The "it" would be an additional step that the user needs to do e.g. click an "accept" button that kicks of another "request" to the web service indicating that the initial request satisfied the users query - logically this request will need to contain some type of identifier that will enable you to map it to a previous request.

Problems setting up 2way SSL with option Client certs requested Not Enfor

Hi,
Iam having problems trying to set up 2 way SSL with the option "Clients Certs Requested But Not Enforced". I am using DefaultIdentityAsserter with my own implementation of UserNameMapper. And I have the login-config set to CLIENT-CERT in web.xml. I have tested this setup and it works when I have "Client Certs Requested and Enforced" but when I change it to "Requested and not enforced" it gives an 401 unauthorized exception.
Any help with this will be greatly appreciated.
Thanks
Praveena.

Hi Peter,
I'm afraid not, I turned to Apple support forums, followed their advice for troubleshooting Mac Mail (obviously not relevant to you using Outlook) but It involved scanning ports checking firewalls etc, all of this was clear and I just cannot see the problem.
I even got one of the Livechat BC guys to look into it, by setting up a dummy email address on the client's account, I think he was rather intrigued, but I'm not sure he's had much luck as he still hasn't got back to and that was over 20 hours ago.
Can your client receive emails? I can only get my client's account receiving emails, when I try to send an email I just keep receiving an message telling me that it cannot connect to smtp!
According to the BC fact sheet for sending and receiving emails: "By Default, email software will set the SMTP port to 25, which is the standard port for the smtp protocol. However our mail service has two alternative ports available that you can send through. 8025 or 587.
However it's not blocked and those port settings didn't work either.
The Apple fact sheet made mention to firewall settings possibly also blocking, but it's not relevant to me using my version of OS.
Good luck, and please repost if you get any further.
I am now just looking for a reason that my client's mail WONT work on Mac Mail, just so I can sound professional when I tell them the answer is "no".
Penny

WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

Hello,
I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
Weblogic gives error in handshaking and says algorithm is not supported.
Vista web client uses some algorithms which were not supported by weblogic 7.
So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
Any information in this regard would be helpful.
Thanks in Advance.

can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
-Dweblogic.StdoutDebugEnabled=true
-Dssl.debug=true
thanks,
sandeep

SPA303 Provisioning over SSL with Client Verification problem

Similar Messages

Maybe you are looking for