Split 1 input structure into N output structures how can be implemented?

Hi friends, The question is how you can implement a split of a message to others(N) according to mesage elements (of the first) ?
Thank you in advance?
Antonis

Hi antonis,
You need to do multimapping to split single message to n messages.
Check these links..
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3ca2529491bc7e10000000a11466f/content.htm
If you are on SP14..
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/content.htm
Regards
Anand

Similar Messages

How to merge five different xml input files into three output files

Hi All,
Can you please explain me to merge 5 different xml input files into 3 output xml files.
I'm looking forward for ur suggestions...
Thanks
Pullarao

HI
Please see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
<b>BPM CollectPattern..</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Thanks !
Regards
Abhishek Agrahari
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>

I would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

Go to the Project Library View and select your project.
Then FILE/DUPLICATE PROJECT and give the duplicate a name like "your name - part 1".
Then duplicate it again and give the duplicate a name like "your name - part 2"
Now you can open "part 1" as a project and delete everything that is in part 2.
Open "part 2" as a project and delete everything that is in part 1.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

HT2589 i have another account that has money in it already but i had forgotten my security answers so i created a new account with a recovery email but my money is not added into my new account. how can i recover the money and added to my new account

i created a new account because i had forgotten my security answers. now the problem is that the money i had in my other account wasnt transffered to my new account, even thou i put in a retreive email address into my new acount. how can i tranffer the money into my new account?

You can't transfer a balance from one account to another account, it can only be used on the account that it was originally redeemed onto.
If on your old account you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address on it then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

By mistake I put the camera memory card into the DVD slot How can I get it out

I put the camera memory card into the DVD slot How can I get it out

You'll be pleased to know you're not the first (or last) to do this .
Have a look at this old thread, Cathy 1956's tip on page 1 seems to work for a lot of people:
https://discussions.apple.com/thread/2283444?start=0&tstart=0
Worth reading the whole thread as other people have chimed in with other ways of extracting the disk.

I had a mobileme account, it seems to have continued into a cloud account. how can i terminate this account?

i had a mobileme account, it seems to have continued into a cloud account. how can i terminate this account?

You can't teminate an iCloud account; just stop using it and ignore it - it's not costing you anything.

How to change output video resolution. I have 1920x1080 video but sharing from FCPX only allows 640x480. I want 1920 output. How can I resolve this?

I have 1920x1080 video file that I edited. When I attempt to share the edited file from FCPX, it only allows 640x480 output resolution. I want 1920 output. How can I resolve this?

Hi,
Final Cut will output the video at the resolution of your project's timeline.
You can change the settings and scale your project up though by adjusting the sequence settings and then, if necessary, copying and pasting attributes to scale up the sequence.
I had this question before and made a video explanation of how to re-scale a sequence here - https://www.youtube.com/watch?v=***9d-rHsKo&feature=youtu.be .
If you have any more questions about this then just drop me a message here.
Cheers,
Ben

I'm trying to watch a tv show in my iPad but it keeps freezing 15minutes into the program. How can I fix this?

I'm trying to watch a tv show on my iPad but it keeps freezing 15 minutes into the program. How can I fix this?

Moved to Adobe Reader for iOS.
If you are trying to open an xml based pdf file, then it is not supported on the present version of Reader for iOS.

I have a document that I want to seperate into several documents. How can I do this ?

I have a document that I want to seperate into several documents. How can I do this ?

If you mean a PDF document and want to separate it into several parts, there is no way of doing it with just the free Reader, buy it can be done with Acrobat. If you are talking of another type of document, please post full details.

My iPhone is merging different contacts with the same firstname into one contact. How can i resolve this.

My Bosses iPhone is merging different contacts with the same firstname into one contact. How can i resolve this? He seems very disturbed and thinks i don't know what i'm doing. I've set up all his devices to sync across and now its messed up on his iPad, and two iPhones.
E.G Contacts with firstname 'Adams' and different numbers are synced into one account.
Now i have no clue how many contacts are this way cos he has a huge number of contacts (he's the ceo).
Please i need a suggestion on how to fix this.
Thanks for the help.

Janie Mac wrote:
Cannot find settings to then go to general then about.
How do I edit the device in iTunes?
Double-click on the name.
My screen shot shows both devices because I sync wirelessly. Right now I can change the iPod name but not the iPad name because the iPod is idle while the iPad is syncing. In another minute or two, I'll be able to change the iPad name.

Stored Procedure - Split one Input Paramater into two Paramater

What is expected from me
1) I am getting a input parameter as a string (url+id)with two delimiters(, and |) i.e 'html\abc.com,http\efc.com|112'
Logic: If ID is not in the table or if ID is not there in input parameter then return null
else
send ID and URL from the table
The way I am tackling aforesaid as I am new in Oracle PL/SQL
1) I have two separate split function one to tackle , (comma) other to tackle |(pipe) which i got from NET
2) I am creating 2 table with 2 columns (ID(identity),val)
3) I am splitting input parameter and pushing result in first table where ID will always be second record
so if count(*) = 1
then return nothing (as there is no ID to map in the table)
else
4) splitting first row and pushing result in second table and then mapping with the table if its there then returning the val back...
Here is the code Please let me know where i am going wrong?? where i have to correct??
CREATE OR REPLACE
PROCEDURE ap_dbi_ps_PM_Search
v_PAGE_CTX IN VARCHAR2,
v_CTX_ID IN NUMBER DEFAULT NULL ,
v_Count IN NUMBER DEFAULT NULL ,
cv_1 IN OUT SYS_REFCURSOR )
AS
---tblPM table 2 columns id (idendity) and val
CREATE SEQUENCE tb1PM_id START WITH 1 INCREMENT BY 1;
CREATE TABLE tb1PM
( id NUMBER(10,0) PRIMARY KEY, Val VARCHAR2(400)
CREATE OR REPLACE TRIGGER tb1PM_id_TRG BEFORE
INSERT ON tb1PM FOR EACH ROW BEGIN
SELECT tb1PM_id.NEXTVAL INTO :NEW.id FROM DUAL;
END;
-- tblPM1 table 2 columns id (idendity) and val
CREATE SEQUENCE tb1PM1_id START WITH 1 INCREMENT BY 1;
CREATE TABLE tb1PM1
( id NUMBER(10,0) PRIMARY KEY, Val VARCHAR2(400)
CREATE OR REPLACE TRIGGER tb1PM1_id_TRG BEFORE
INSERT ON tb1PM1 FOR EACH ROW BEGIN
SELECT tb1PM1_id.NEXTVAL INTO :NEW.id FROM DUAL;
END;
--Split the input paramater and push result in tblPM*
INSERT
INTO tb1PM
val
(SELECT * FROM TABLE ( CAST(split('v_PAGE_CTX') AS split_tbl))
DECLARE
v_Count NUMBER
10,0
DECLARE
V_CTX_ID NUMBER
10,0
SET V_CTX_ID =
(SELECT DISTINCT TO_NUMBER(val) FROM tb1PM WHERE id = 2
SET v_Count =
(SELECT COUNT(*) FROM tb1PM
BEGIN
IF v_Count = 2 THEN
INSERT
--Split URL's from tblPM*
INTO tb1PM1
val
(SELECT *
FROM TABLE(splitcomma(
JOIN(CURSOR
(SELECT val FROM tb1PM WHERE id =1
OPEN cv_1 FOR SELECT PAGE_DISPLAY_URL,
CTX_ID FROM portal_mapping WHERE CTX_ID = V_CTX_ID group by V_CTX_ID HAVING v_PAGE_DISPLAY_URL IN
( SELECT DISTINCT val FROM tb1PM1
RETURN;
DROP TABLE tb1PM;
DROP TRIGGER tb1PM_id_TRG;
DROP SEQUENCE tb1PM_id;
DROP TABLE tb1PM1;
DROP TRIGGER tb1PM1_id_TRG;
DROP SEQUENCE tb1PM1_id;
ELSE
EXCEPTION
WHEN OTHERS THEN
-- NULL;
END IF;
END;
show errors;
ERROR which I am getting is
Warning: execution completed with warning
PROCEDURE ap_dbi_ps_PM_Search Compiled.
24/1 PLS-00103: Encountered the symbol "CREATE" when expecting one of the following:
begin function pragma procedure subtype type <an identifier>
<a double-quoted delimited-identifier> current cursor delete
exists prior external language

You have to learn how to write the procedure before you could write one. I just corrected the syntax errors. I did not paid attention to your logical errors. This one compiled without errors other than the table does not exists. My doubt is If you are creating the tables in the procedure, how will the tables already have data?
CREATE OR REPLACE PROCEDURE ap_dbi_ps_PM_Search ( v_PAGE_CTX IN VARCHAR2, v_CTX_ID IN NUMBER DEFAULT NULL , v_Count IN NUMBER DEFAULT NULL , cv_1 IN OUT SYS_REFCURSOR )
AS
BEGIN
---tblPM table 2 columns id (idendity) and val
execute immediate 'CREATE SEQUENCE tb1PM_id START WITH 1 INCREMENT BY 1';
execute immediate 'CREATE TABLE tb1PM ( id NUMBER(10,0) PRIMARY KEY, Val VARCHAR2(400) )';
execute immediate ' CREATE OR REPLACE TRIGGER tb1PM_id_TRG BEFORE INSERT ON tb1PM FOR EACH ROW BEGIN SELECT tb1PM_id.NEXTVAL INTO :NEW.id FROM DUAL; END';
-- tblPM1 table 2 columns id (idendity) and val
execute immediate 'CREATE SEQUENCE tb1PM1_id START WITH 1 INCREMENT BY 1';
execute immediate 'CREATE TABLE tb1PM1 ( id NUMBER(10,0) PRIMARY KEY, Val VARCHAR2(400) )';
execute immediate 'CREATE OR REPLACE TRIGGER tb1PM1_id_TRG BEFORE INSERT ON tb1PM1 FOR EACH ROW BEGIN SELECT tb1PM1_id.NEXTVAL INTO :NEW.id FROM DUAL; END';
--Split the input paramater and push result in tblPM
execute immediate 'INSERT INTO tb1PM ( val ) (SELECT * FROM TABLE ( CAST(split( ''v_PAGE_CTX '') AS split_tbl)) )';
-- SET V_CTX_ID = (SELECT DISTINCT TO_NUMBER(val) FROM tb1PM WHERE id = 2 ) ;
select distinct to_number(val) into v_ctx_id from tb1PM where id = 2;
-- SET v_Count = (SELECT COUNT(*) FROM tb1PM ) ;
select count(*) into v_count from tb1PM;
IF v_Count = 2 THEN
INSERT INTO tb1PM1 ( val )
(SELECT * FROM TABLE(splitcomma( JOIN(CURSOR (SELECT val FROM tb1PM WHERE id =1 ) ) ) ) );
OPEN cv_1 FOR SELECT PAGE_DISPLAY_URL, CTX_ID FROM portal_mapping WHERE CTX_ID = V_CTX_ID group by V_CTX_ID HAVING v_PAGE_DISPLAY_URL IN
( SELECT DISTINCT val FROM tb1PM1 );
RETURN;
END IF;
END;
EXCEPTION
WHEN OTHERS THEN
DROP TABLE tb1PM;
DROP TRIGGER tb1PM_id_TRG;
DROP SEQUENCE tb1PM_id;
DROP TABLE tb1PM1;
DROP TRIGGER tb1PM1_id_TRG;
DROP SEQUENCE tb1PM1_id;
END;

How can i implement ISO file structure on the JC?

I am a student who come from Taiwan.
My english is not very well and i an very sorry for that.
I will do my best to say what's the question mean and how can you help me .
My JC project need to use ISO file structure on the JC.
But there are no paper use chinese language about implement ISO file structure on the JC in Taiwan.
So i don't know how to implement ISO file structure on the JC.
Can anyone tell me where can i get paper and source code about implement ISO file structure on the JC？
Thanks for you view this question.
Erebus.

Nihao,
There is no documentation about this because ISO FileStructure is not supported in current JC specs. You can explore the JavaPurse project providet with the JC development kit form SUN and find there cyclic file implementation. All other implementations should be then programmed in similar way.
(And do not worry about your english, it is good enough. Better than my chineese ... couldn't even order a cab last year I was in Taipei .... )
Zai Jien,
BigBadDog
:)

I am able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. How can I fix that?

I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?

Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W.

Images in my FrameMaker 10-sourced Robohelp Web Help project are turning out as blank JPEGS appearing as blank spaces in the final output. How can I fix this?

I'm attempting to create online help sourced from a FrameMaker 10 book using Robohelp 9 and Web Help (primary layout).
The text is interspersed with numeorus small icons which, in the FrameMaker documents, are .bmp images inserted into anchored frames in the lines of text.
Most of these icons were imported by reference into the FrameMaker book's chapters. Some were copied from another FrameMaker book and pasted into the present book.
Many of these images are turning out blank in the finished Help project.
Robohelp seems to convert these images into JPEGS.
In the source FrameMaker book, the images which appear OK in the Help project have Object Properties including: Facets: FrameVector JPEG ... Referenced File: No File
The images which appear blank have different object properties there: Facets: DIB ... Referenced File: (address of the image's source file)
How can I fix this and make all of the images appear in the Online Help?

Sorry, Jeff. I missed the key word in your instructions. Well, I did the import and still no luck. I'm getting the exact same results with the same images. (In some cases, I'm even getting hidden conditional text from the FM document body showing up in the image's frame instead of the image! See below.) This is bizarre behavior, but it's not new with the import. It is happening both in the linked and imported WebHelp with the same exact images. (Just another piece to complicate the puzzle.) So we have some jpeg images that are blank, and a few that are glitchy. From what I can tell, the commonality, besides the fact that all these new images are in jpeg format instead of gif format, is that all the blank and glitchy images are in a text inset. I'm beginning to think maybe RH just doesn't support text insets at all.
Arnis, I'll have to ask my colleague how she created the images next week when she's back from vacation. I have no clue if there are any differences between the jpegs and why some are showing up correctly. What do you mean by "compression type or level?" Are you asking about the resolution (high, medium, low) she chose when saving the images, or which program she used to do the screen capture and editing? (We have Adobe Photoshop CS5 and FM 11).
My next step is to copy-paste all the content from the text insets into my FM document (in the book I am linking) and re-render to see if that solves the problem. It will make single-sourcing impossible because I'll have to copy-paste the new content and images my colleague creates into my document each time we do an update, but oh well.
Here is an example of a glitchy image in RH:
And here is what it looks like in FM:
So bizarre!

Split 1 input structure into N output structures how can be implemented?

Similar Messages

Maybe you are looking for