Split Mapping

Hi experts,
I am performing a split mapping via java mapping in a FILE to FILE scenario. In sender file adapter i am using file content conversion. I have 2 files i want to process via PI. The files sizes are 16kb and 75 kb. When i process 16kb file there is no problem in mapping or in scenario, it works just fine.
But when i try to process 75kb file i am getting the error below.
When i test the same payload in operation mapping it is executed successfully. What could be the reason for getting this error?
Any help would be appreciated.
Note: Java mapping as text is attached.
Regards.

Hi again,
The problem was with the input payload, it contained "bytes" as NULL as you can see in image below.
Is there any way i can manage to ignore those "NULL" s in java mapping? Or change them in to space? Because when i do cut and copy the contents in the file "NULL" characters change into space character, after that it works just fine.
Thanks,
Regards.

Similar Messages

Please help me to solve error: Split mapping created no messages

Hi Experts,
I am facing Split mapping created no messages when i run my scenario.
My Scenario is : Proxy to FILE.
I am triggering Proxy and based on one condition i am generating different Flat Files.
Now when i do this i am getting error :Split mapping created no messages in SXI_MONITOR.
When i check this in Message Mapping by taking data from SXI_MONI its working fine...
but when i trigger the data from RUNTIME WORKBENCH its throughing the error.
When i remove the NameSpaces <ns0:message>
and <ns0:messages1> its working fine.
How can i solve this issue.
Even though i removed Namespace in Message Type, i am getting the error.
I changed occurance of Target message to O..unbounded both in Message Mapping and Interface Mapping.
Its working fine in Message Mapping, problem occurs only when i run end-to-end scenario.
So please help me to solve this issue.

I think there might be mismatch between your name spaces.
may be this link might help you
Split mapping created no messages -Mluti Mapping
are you getting the same structure from your proxies whatever structure you have in your XI structure(sender) and NS should match.
but I dont have exp with proxies.
Sri

Split mapping created no messages

hi All,
I have an issue while using multi- mapping runtime in PI 7.1. The messages work successfully in Operation mapping. However, during runtime it fails with the message "Split mapping created no messages".
The issue is the same as we have in the below link :-
Multi Mapping issue - *Split mapping created no messages*
But there is a slight difference in the scenario. Please find the same below:-
There were initially two mappings in the operation mapping.
The first one is a shared mapping and 1:1 to 1:1 occurence
The second one is a new mapping which should have 0:unbounded to 0:unbounded containing 4 different message types at the target
Due to the first mapping being shared, and already in production, we can not do any updates on it. Hence a workaround was to add a Java mapping in between the two mappings simply to add the Message - Message 1 header as for multimapping.
This works in ESR but not during runtime or test configuration.
Please let me know if this is the wrong perspective to it. I understand that the final solution can be to simply split all messages and have four different mappings in the Interface determination itself. But i would really like to know why this adding of message- message1 header is not possible.
Regards,
Ninu

hi All,
I have an issue while using multi- mapping runtime in PI 7.1. The messages work successfully in Operation mapping. However, during runtime it fails with the message "Split mapping created no messages".
The issue is the same as we have in the below link :-
Multi Mapping issue - *Split mapping created no messages*
But there is a slight difference in the scenario. Please find the same below:-
There were initially two mappings in the operation mapping.
The first one is a shared mapping and 1:1 to 1:1 occurence
The second one is a new mapping which should have 0:unbounded to 0:unbounded containing 4 different message types at the target
Due to the first mapping being shared, and already in production, we can not do any updates on it. Hence a workaround was to add a Java mapping in between the two mappings simply to add the Message - Message 1 header as for multimapping.
This works in ESR but not during runtime or test configuration.
Please let me know if this is the wrong perspective to it. I understand that the final solution can be to simply split all messages and have four different mappings in the Interface determination itself. But i would really like to know why this adding of message- message1 header is not possible.
Regards,
Ninu

PI 7.30 Message Mapping with MsgSplit error Split mapping created no messages, cannot proceed.

Hi @all,
I am working on a scenario to split one soruce message with several items to 0..n message for the same receiver.
Therefore the occurrency of target message (signature in MM) have been adjusted.
Not all items are forwarded to receiver, only if the content meets some rules the item should be forwarded.
It could be that no item of the source message meet these rules and therefore no target message at all should be created.
During test of this case I am facing following error in RWB, scenario is setup as integrated configuration.
MappingException: Split mapping created no messages, cannot proceed. Review your mapping setup: splitting to 0 messages is not allowed.
As the occurrency of the target message is 0..n, 0 should be also valid and there should be no error in this case, just stop processing like if there is no receiver in receiver determination step (mode IGNORE)
Otherwise this will end up in lots of error messages which have to be analyzed and canceled manually which is quite time consuming.
Maybe someone faced the same issue and found a solution to get rid of this error message.
Best regards
Jochen

Hi Somil,
hi Sriram,
thanks for your response.
In my scenario there also multiple receiver applications receiving data from one single sender application. We are using PI 7.30 dual stack and major goal is to setup all scenario as integrated configurations to have java only processing. One reason for this setup is that the main support user do not have extensive PI knowledge so far and we want to keep it as simple as possible and therefore do not want them to care about the abap stack as much as possible.
Unfortunately migration to java only is not possible yet.
In this release extended receiver determination using operation mapping is not supported in integrated configuration.
There is quite complex rules to check if an item should be forward or not including lots of fields and also value mapping, so it would be quite difficult/impossible to write XPATH expression to have the same check during receiver determination step.
One workaround could be creating a dummy message in case of no item to be forward and root this message to different place (local file which is always to be overwritten)
Are there any alternatives/workarounds?
Best regards
Jochen
Message was edited by: Jochen Gugel

Multi Mapping issue - *Split mapping created no messages*

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different inbound service interfaces, one for each message type.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Runtime error
*Split mapping created no messages*
Start tag ns0:MessagesStart tag ns0:Message1Close tag ns0:Message1Start tag ns0:Message2Close tag ns0:Message2Close tag ns0:Messages
Could someone please help
Cheers,
S

Hi,
(1)First change the occurrence of target message to 0..unbounded.
(2) Do the mapping and test it under test tab of mapping whether your mapping is working fine creating target records.
(3) Copy the source code from mapping and remove the unwanted tags "as Mark said " those were created due to multimapping.
Then test that file and that will work.
You can follow this link .
Link :Message Splitting
Thanks
Rabi
Edited by: RabiPanda on Nov 17, 2011 8:42 AM

1:2 Message Mapping WithOut BPM - Split mapping created no messages Error

Hi,
I am a new-bie to SAP PI and am trying out the following scenario without BPM.
Make multiple files based on Age received from input file.Input File contains Name,DOB and Output File contains Name, Age.
I want to create 2 files, one containing details of people with Age <21 and the other output file containing details of people with Age >= 21.
To acheive this,
In IR, I created 2 DT and 3 MT,1 MM with 2 Target MT,both having occurences 0..unbounded, 1 IM with 2 Target MI,both having occurences 0..unbounded
And in ID, 1 Sender Agreement, 2 Receiver Agreement, 1 Receiver Determination, 1 Interface Determination using Enhanced Interface Determination.
When i run this scenario, I am getting the following error "Split mapping created no messages"
Please let me know how can I resolve it.

Oops, I did not know that.
Thanks for that information. uhuuuuuuuuuuu, atlast the message is processed and I am seeing output files created.
But, there is still one problem. My output files are created with just the following content
<?xml version="1.0" encoding="utf-8" ?>
<ns1:MT_2OP_File_Out xmlns:ns1="http://POC_Sec1_1IP2OP2" />
In MM, I see the output message as follows:
Message
     Message1
         MT_2OP_File_Out
              Employee
                  Name
                  Age
     Message2
         MT_2OP_File_Out1
              Employee1
                  Name
                  Age
The mapping done:
MT_2OP_File_Out and MT_2OP_File_Out with the Message Type element on source end.
Employee and Employee1 are mapped as
     Age -> removeContext -> SplitByValue[Each Value] < 21, Map Employee
     Age -> removeContext -> SplitByValue[Each Value] >= 21, Map Employee1 resp
The fields are straight maps.
Is there any basic mapping error that I am making. Please help.

No messages created from split mapping - Multimapping

Hi,
Getting the error in MONI saying that : No messages created from split mapping
Sender is :
   <Purchase>
            <Number>007</Number>
            <Desc>RAJ</Desc>
            <Quantity>half</Quantity>
   </Purchase>
Target should be 3 files such as:
<Purchase>
            <Number>007</Number>
            <Desc>RAJ</Desc>
   </Purchase>
<Purchase>
            <Number>007</Number>
            <Quantity>half</Quantity>
/Purchase>
<Purchase>
             <Desc>RAJ</Desc>
            <Quantity>half</Quantity>
</Purchase>
Regards,
Y.Raj.

Hi,
In your mapping select the cardinality of source message as 0..1 while that of target message should be 0..unbounded.
Also since you are not using all the elements of source into all the target messages (seems using only two source elements in each target msg) do the mapping accordingly...i doubt whether you can achieve your requirement in one mapping itself....may be you will have to follow what Tarang mentioned:
3. have 3 mappings between source structure and MT1(map only num,dec), source struc and MT2(map num,Qty) ....
Exception to above statement:)
If you set the target cardinality as 0..unbounded then duplicate the root target node thrice (as per your requirement)....and then map each target section seperately....
Regards,
Abhishek.
Edited by: abhishek salvi on Apr 7, 2009 9:12 AM

No messages created from split mapping

Hello,
My Scenario is JDBC to Proxy and there is 1:n Mapping
I had done the multi mapping and done the all the necessary configuration in the MM, IM and ID
I tested the payload in the MM and IM and it is working fine.
But while iam doing the end to end testing in the ID --- Test Configuration,It is showing the error at Interface Determinmation and Mapping step.
In SXMB moni, iam getting error as
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>No messages created from split mapping</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No messages created from split mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The below is my source payload.
<?xml version="1.0" encoding="utf-8" ?>
- <ns:mt_vendor_fusiondb xmlns:ns="http://loreal.com/poc_vendor">
- <row>
<ID>1</ID>
<LIFNR />
<NAME1>SriTest</NAME1>
<PSTLZ>07066</PSTLZ>
<LAND1>USA</LAND1>
<TELF1>1234567890</TELF1>
<Status>READY</Status>
<LastUpdated>2008-11-20 09:20:00.0</LastUpdated>
</row>
- <row>
<ID>2</ID>
<LIFNR />
<NAME1>GilderTest</NAME1>
<PSTLZ>07066</PSTLZ>
<LAND1>USA</LAND1>
<TELF1>1234567890</TELF1>
<Status>READY</Status>
<LastUpdated>2008-11-20 09:20:00.0</LastUpdated>
</row>
- <row>
<ID>3</ID>
<LIFNR />
<NAME1>KarthikTest</NAME1>
<PSTLZ>07066</PSTLZ>
<LAND1>USA</LAND1>
<TELF1>1234567890</TELF1>
<Status>READY</Status>
<LastUpdated>2008-11-20 09:20:00.0</LastUpdated>
</row>
</ns:mt_vendor_fusiondb>
Please help me in resolving this error
Srinivas

Hi Carlos,
Now my message mapping is working, the error is in the messagetype i declared 'row' as capital letters,due to this in the runtime it is erroring out in the request message mapping.
But still I had one more issue,iam getting error in Technical routing, the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi message format can be sent to one adapter engine only</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the ID i checked the radio button extended.
But still iam getting the above error.Can you guide me in resolving the error

No messages created from split mapping error .....

HI XI Friends..
In My XML to RFC scenario,,
i am doing message splitting withput BPM.
in message mapping ..i changed target message occurance to unbounded
and same i did in interface mapping also..
static test is OK..creating multiple target messages in static test.
in interface determination,using enhanced option i given interface mapping.
file is picking but in SXMB_MONI ...i am getting error like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>No messages created from split mapping</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No messages created from split mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
please guide me..
regards
ram

Hi Ram,
Check these..
Split mapping created no messages
Message Split without BPM - Error
cheers,
Prashanth
P.S Please mark helpful answers

Enhanced Interafce Determination Split Mapping Performance factor

Hi,
I want to know is it a good practice to use Split Mapping using the Enhanced Interface Determination (EO-Maintain Order at Runtime is unchecked) and let the JEE adapter handle bundlings, etc.
If the number of messages split are more say in order of thousands, it causes severe stress on the JEE Server and it goes down.
Is Enhanced Interface Determination recommended to be used for high volume or any parmeters have to be tuned for its use.
Thanks.
Regards,
Sudharshan N A

Hi
Enhanced Interface Determination can be used for High Volume
BPM is the other option for multimapping.
But as compared to BPM , Enhanced interface Determination is the better option by performance .
Regards
Abhijit

Multi-Mapping "Split mapping created no messages"

Hi there
I have some issie when trying to create multiple messages from a single message. I am using file to file adapter and in the interface determination, enhanced config. Also my file structures are setup correctly. The inbound and outbound structure looks the same so theres no funny mapping used. I cheked my comm channels in the RWB and its fine and when I do a test config in the integration builder it complains about my interface determination but does not say whats wrong. Just the icon. I looked at some of the other blogs but they do not really help. Any ideas what this might be? The inbound message looks like this:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Allocations_Reply_OUTB xmlns:ns="urn:metcash.co.za:test">
- <IDOC_Recordset>
- <IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
- <IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
- <IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
</IDOC_Recordset>
</ns:MT_Allocations_Reply_OUTB>
*And the Error:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanx,
Jan
Edited by: Jan de Lange on Nov 24, 2008 10:25 AM

I checked my config in the IR with the following payload, but is still only shows a stop icon on interface determination & mapping with no error trace:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_Allocations_Reply_OUTB xmlns:ns="urn:metcash.co.za:test">
<IDOC_Recordset>
<IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
<IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
<IDOC_Structure>
<PLANT>134</PLANT>
<ORDER_NUM>50885006</ORDER_NUM>
<FILLER>1</FILLER>
<PLU_NUM>00000000074893650</PLU_NUM>
<QTY>000024.00</QTY>
<FILLER_2>j</FILLER_2>
</IDOC_Structure>
</IDOC_Recordset>
</ns:MT_Allocations_Reply_OUTB>

Error Message: Split mapping created no messages

Hi,
I just would like to ask you views on this type of error message.
Could anybody please explain to me as to how this error occurs? What are the factors that causes this error?
Thank you so much.
Grace

check this link, similar problem is discussed....
Re: Split mapping created no messages -Mluti Mapping
it might be your payload of the source is not what it actually exopecting to create the target strucutre...

Error - Split mapping created no messages

Dear Experts,
while executing the IDOC to File scenario in PI 7.0, it shows error as u201C Split mapping created no messages u201C.
To resolve this error I have removed the extra tags with namespace specified as "\SplitAndMerge" in source XML message and also IDOCs used in the Interface maps are standard. no issues with mapping also.
kindly suggest me to solve this issue.
Thanks and Regards,
Srinivas

Hi,
Now i have solved the error of empty file creation. in my target file i am able to populate the data. but now ths issue is --
i have source IDOC with 3 sales items and i need to generate 3 records in Output file. but now i am geeting only the first record.
So please let me know how to get the remaining 2 line items also in my Output file.
Source MT:
Messages                   1..1
      Messages1               1..1
ItemMain                  1..1
item                        0..unbound
      Messages2           1..1
Item2                     0..1
Target MT
Messages                   1..1
    Messages1               1..1
        TItem                          0..1
           item                         0..unbound
   Messages2                1..1
       TItem2                         0..1
Best Reagrds,
Srinivas

MAPPING GENERIC (Split mapping created no messages) error is sxmb_moni

Hello,
We are having thousands of messages failing in sxmb_moni due to MAPPING GENERIC error. It also states that <i>Split mapping created no messages</i>. Where will I start my investiagtion? I already checked both ID and IR but I could hardly determine what causes this error.
Here is a part of the error message from the trace:
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Object-Id:6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="1" type="T">Mapping-SWCV:A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Step:1</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_ completed. (executeStep() of com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Message Type 1 Number of Messages 0</Trace>
<Trace level="3" type="T">Message Type 2 Number of Messages 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
Thanks in advance!

<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
You have used the Trace object to write some Trace in your User Defined Functions. Does this trace make sense in terms of your mapping logic to you?
Did you remove the <messages> tag from your source message?
Also, If you are using multimapping make sure that the mapping creates all the messages in the Target Side and that the Inbound adapter is neither Idoc nor HTTP.
Regards
Bhavesh

Split Mapping message IDs in Adapter Engine

Hi Experts,
I have to get the message ID of all messages from adapter engine where these messages are created as a result of a split mapping.
I only have the inbound message ID in integration engine. Is there any place where this correlation is maintained.
Regards,
Ravi.

hi,
Check out this blog also:
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
Rgd, Adapter Engine:In general
http://help.sap.com/saphelp_nw70/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Message Flow for some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
hope this may help you,
regards,
srinivas

Split Mapping

Similar Messages

Maybe you are looking for