Splitting, Staging and Sending

HI,
I am trying to create a solution where I am looking to Split one xml into three xmls using Multimapping. The three xmls are like the staging tables. These three xmls then will be transformed into three output xmls and send to three different locations in File Directory.
Scenario:
                                      -----> Staging xml    -------> Output Message (xml)
Third party sysytem (xml) ---> SAP PI -----> Staging xml    -------> Output Message (xml)
                                       -----> Staging xml    -------> Output Message (xml)
I am looking for a solution without BPM.
Regards,
Rahul

Hi Rahul,
refer the below link which gives info about how to split messages and creating separate files in their respective target file folders.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0b6bb9d-7689-2c10-52a7-c3bd341d4e5f?quicklink=index&overridelayout=true
Thanks

Similar Messages

Need help: message split and send in BPM

i have this mapping where the idoc has to be split first before passing it to a BPM. the mapping should perform like this
from
IDOC
   segA
     segB1
     segB2
     segB3
   /segA
/IDOC
to
IDOC
    segA
      segB1
/IDOC
IDOC
    segA
      segB2
/IDOC
IDOC
    segA
      segB3
/IDOC
I was successful in doing the 1st step of mapping requirement for the above transformation. The next step was to map per occurence of IDOC to another target message and send it (ex. above is 3 occurence of IDOC, so there should be 3 mapping and sending that should happen. My problem now is how to design the BPM for this. Any suggestions?
Message was edited by:
        Brian Lo

create one MT such as
root
|__IDoc
|__segment
duplicate the subnode in the target message mapping (right click on the node and select dupliate subtree) and ten do the mapping...here u can go 4 this approach only if the number of number source segments (ie. sega, segb1, segb2, segb3) are constant....have read in coupe of threads that split mapping is not possible for idocs.....u may also need to check on it

Split and send End of record in JDBC

Hi Experts,
We have a interface in which Sender channel(JDBC) is picking the records from database and Sending it to Receiver Proxy.
I need to split the Records in batches and when all records are inserted Trigger the an End of File (EOF).
If there are 100000 Records I need to split it into 10 batches(i.e. 10,000 each ) and send the Data to Proxy.
After the 100000th record is picked I need to trigger the End of File.
So Thereby My Requirement is :
1) I need To determine the size of database and Split it into 10 batches.
2) when the Last record is Inserted I need to trigger the End of File(i.e. the last record of database)
3) Should perform this without the help of stored Procedures
Any Help is Highly Appreciated
Best Regards,
Sainath Chutke

Created one more message mapping!!

How to count records in table and send email only if count 0

I thought this would be fairly simple, but apparently not. I'm trying to count the number of records I have in my staging table, and send an email if count > 0 . . . . and . . . . I want to put the count in the body of the email.
I'm running into a problem with the concatenation part of it.
SET NOCOUNT ON
SELECT * FROM [dbo].[Staging]
SELECT @@rowcount as Row_Count
SET NOCOUNT OFF
IF @@rowcount > 0
BEGIN
exec msdb.dbo.sp_send_dbmail @profile_name = 'MailTest',
@recipients = '[email protected]',
@subject = 'Successfully Loaded Production',
@body = 'Successfully Loaded Production ' + @@rowcount + ' records loaded',
@body_format = 'text'
END
The problem comes from the '+' character not being recognized. Maybe it's out of scope, not sure.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Try this
SET NOCOUNT ON
IF EXISTS (SELECT TOP 1 1 FROM [dbo].[Staging])
BEGIN
exec msdb.dbo.sp_send_dbmail @profile_name = 'MailTest',
@recipients = '[email protected]',
@subject = 'Successfully Loaded Production',
@body = 'Successfully Loaded Production ' + @@rowcount + ' records loaded',
@body_format = 'text'
END
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Adapter Modules & split 997 channel reqd for splitting Edi and Acknowledgement

Hi,
I am using PI 7.11 with B2B add-on installed.We will be using AS2 adapters ,as of now
configured file adapters in place of it.
This B2B scenario does not consists of Party because 1 sender and 1 receiver system is involved as of now.
May be client provides identifiers details and include party.
In my previous B2B scenario(PI 7.3) involving Seeburger , AS2 channel was configured with(image shown below)
SeeClassifier,BIC, message splitter modules and Split997 channel for splitting EDI PO and Functional Acknowledgement.
What are the adapter modules that will be required in case of B2B add on (PI 7.11)and does it requires
EDI separator channel for splitting EDI doc & Func Ack.What can be the other probable issues.
How we will monitor the messages and Ack once its implemented end to end?
Regards,
Mayank Yadav

Hey Mayank,
Inbound Scenario configuration: (3 step)
1) Sender AS2 (EDI messages) -----> EDI separator receiver (no mapping required here; EDI separator is used to split bulk EDI messages and configure acknowledgements (997) if required)
2) EDI separator sender (with message type(eg.850),version and sender ID/receiver ID configuration; here X12convertor module is used to change raw edi into XML) ----> Idoc or any receiver channel (inbound)(here you have your actual mapping)
(if 997 is configured as requested in the first step; then you need to handle the 997 generated by EDI separator)
3) EDI separator sender (997 message type,version,reverse combination of sender ID,receiver ID) to Receiver AS2 ( no modules required pass through)
Outbound Scenario configuration
1) sender channel (say Idoc) to AS2 receiver (requires mapping)
997 file can be sent back by partners (EDI 997 as acknowledgement)
this will be taken care like any other inbound message) which can be then converted to SYSTAT IDOC or so to track the status of outbound message.
B2B status tab in PI monitoring helps you track acknowledgements
Hope this answers your question:
What are the adapter modules that will be required in case of B2B add on (PI 7.11)and does it require
EDI separator channel for splitting EDI doc & Func Ack.What can be the other probable issues.
How we will monitor the messages and Ack once its implemented end to end?
For detailed information on this; please refer Functional Acknowledgement (Inbound and Outbound FA 997)- for Beginners
Regards,
Pooja

Splitting Audio and Video Signal

HI,
I would like to be able to split the video and audio signal from my ipad via apple tv to enable the video to be viewed on the ipad and audio out of the amp speakers. I can do this via bluetooth (for instance in my car) but not via airplay in the home. Any ideas or app suggestions that might make this work? Ultimately i want to cinnect the ipad into a projector and sending audio back the amp in another room.
thanks
cam.

U can use a digital to analogue convertor to separate the sound http://www.amazon.co.uk/Digital-Optical-Coaxial-Toslink-Converter/dp/B0074JZ8ZW

SAP staging and migration strategy docs

Hi all
We are in process of preparation of staging and migration
strategy to upgrade from 4.6c to ECC 5.0. If any one have template/ Sample docs, kindly send it to me.
Thanks & Regards,
sreepathi

Hi all
We are in process of preparation of staging and migration
strategy to upgrade from 4.6c to ECC 5.0. If any one have template/ Sample docs, kindly send it to me.
Thanks & Regards,
sreepathi

Publish to Staging and Production from the Authoring server

Hi,
Is it possible to configure CQ in such a way that, when the user activate a content, it will be publish to the Staging server.
And then the user can trigger a workflow in the same authoring server, and send the content to the production server?
Or is there any other way round?
Basically the user does not want to login into multiple CQ instance.
Thanks

You would have to implement several things to allow this work:
You need replication agents for all the production publish servers and the staging servers. To simply your life you will probably want to set up your dispatcher agents on your publish and staging servers so you don't have to deal with them during the workflow.
You need to decide how you want the standard activation tools to behave (activate button, activate later, other possible workflows) behave. You have a couple of options:
Have the default activation behaviors publish to both environments
Have the default activation only publish to production publish
Have the default activation only publish to staging
Have the default activation do nothing
Based on that decision above you may have to check the Ignore Default option on the Triggers tab of the replication agents that shouldn't get anything on the standard publish.
Create a workflow process that will publish only to selected publish instances. Most likely this will be a step that only publishes to your Staging server, in which case you need some configuration mechansim which identifies which replication agents are staging agents.

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2).

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.

Not sure about Utilities on your iPad. Do you mean the Settings app?
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

My iphone 4S stopped receiving and sending text messges. Help!

My iphone 4S stopped receiving and sending text messges. Help!

Hi J.A. Curie!
Here is an article that can help you troubleshoot this issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

HCM P&F: Check and Send won't update back end fields?

Hi All,
Here is my issue: I have a field that is not editable on the screen - we manipulate it using a generic service that is called when the user presses a button.
Of course, as we know, all services are called every time 1 service is called, so it ALSO gets called at check and send.
This would be fine, except P&F appears to not actually change the field value at check and send.
So for instance - I click the button and it puts a value of 1.05 in the field. Great - works fine.
If I don't click the button and instead only click check & send - I can see in debugger that it is doing the calculation and putting the correct value in the service_datasets table, but when the form loads the value is not updated on the screen and it is not passed to the next step.
Should check and send manipulate that value? If not, is there a way to force the user event to be called? Sadly, I can't set the field as required, because the required check passes before P&F ignores the new value...
Alternatively, I suppose if there were a way to know the difference between check & send and a user event in the code, that would be good enough.

"Check" should change it just like your User Event does. Is your User Event set to do "check" operation too or is it doing "initialize"? That might be a difference. But yes....the check/send should be changing it on the form to reflect the new value. I do it all the time (for example, in on of my processes right now I have a table of wage types and when the user adds a new wage type to the table, another field is triggered that shows the calculated annual salary in an non-edit form field.....same kinda idea as you are trying).

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

Not able to get the Check and send buttons.

Hi
I am working on HCM Process n Form, It has integration of Webdynpro, Adobe and Process Forms.
We can Create and Modify the position in this applications, There is also option for Saving it as Draft and then Opening it and sending it.
But now when we save it as Draft and try to open it opens the component which has adobe integrated to it but the buttons "Check and Send" and close are not appearing.
There is an dynamic table populated in a popup and by clicking that link it opens the adobe form in a WDA component window.
I am not able to figure it out which component it is and how it is done.
By click of link an action is written which finally fires a plug, The details of this plug i cant find in Windows.
The main component which opens the pop up is POBJ_BROWSER There is no used Components in this Component apart from ALV Table and SELECT OPTIONS
and the final code which we can see after click of link is
methods Fire_pobj_click_overview_Evt
importing
ATTRIBUTES type Pobjt_Level_Attribute
BROWSER_CONTEXT type String
COLUMN_NAME type String
LEVEL_GUID type Pobj_Level_Guid ."#EC NEEDED
If there is any one who have worked on this or any helpfull documents regd this Please let me know
Thanks & Regards,
Deepak.B

Supposed to post in HCM Forum.

Splitting, Staging and Sending

Similar Messages

Maybe you are looking for