SPNego - SETSPN with alias for two separate physical servers

Hi All
We have a scenario where the client has a production server and a backup production server, and a single alias pointing to both (meaning - when the main production server fails, the requests are routed to the backup production server). We need to configure SPNego for these servers.
Lets say the alias name is pralias.company.com
and the main production host name is prod1.company.com
and the backup production host name is backprod.company.com
If I have to setspn to the production servers, can I use just one service user for all these three servers? My SETSPN commands would be:
SETSPN -A HTTP/pralias.company.com scv-j2e-user
SETSPN -A HTTP/prod1.company.com scv-j2e-user
SETSPN -A HTTP/backprod.company.com scv-j2e-user
In the above commands, I have the same service user for all three domain names. Would this work? Or would I need to have 3 separate service users?
Thanks
OJ

>
Olivier CHRETIEN wrote:
> Why would you need 3 SETSPN commands ?
> I would only type a SETSPN command for pralias.company.com and make sure that all users only use URLs with the alias.
That's a common scenario, e.g., to connect to a load-balancer, but also to be able to connect to the individual servers (in case you're investigating if a problem is server-specific).
See Note 1387370, which confirms that single service user can be used for multiple server names (or aliases).
Regards,
Sean

Similar Messages

Is it possible to use Time Machine with an external hard drive for two separate computers?

I'm looking to purchase an external hard drive to use as with time machine as a backup for two separate computers. I'm not sure if I should buy 2 EHDs and dedicate one to each computer, or if Time Machine has the capacity to back up both computers separately. Anyone have any experience with this?
Thanks!

You can make two partitions on a single drive and dedicate one to each computer.
The pic is of a single external usb drive with three partitions( a Time Machine and two image backups) for two computers

How do I maintain a single iTunes library for two separate iMac user accounts?

How do I maintain a single iTunes library for two separate iMac user accounts?...without having to manually do something every download?

Pardon me, I am brand new at using an iMac. I understand the concept but I don't know exactly how to "move" the library. I found a shared folder under users on the hard drive. If I move it, won't I have to redirect each iTunes user to the new shared location?
If I point iTunes to anything other than the music folder under that user name, it shows as a "shared library". Preferences still shows it as that users library, regardless of where the advanced gear button says it is pointing to.
Am I asking for too much to have each user control the exact same music files, apps and playlists? I just want the two different itunes sessions to mirror each other without any frequent updating or copying.
We use the same id for itunes music and apps so we could just sync all devices under one iMac user id and not use it under hers.

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

Can I use one Adobe ID for two separate CC Teams?

I recently got a new job, and am still doing freelance work for my past employer, who will continue to keep me as a seat in their CC membership (CC for Teams).
At my new job, they are in the process of switching over to CC. Will I have to obtain another adobe ID to be a member of their team membership, or can I use the same one that I use for my previous job?
Also, will I then have two separate Cloud folders? How will this affect desktop sync? Will I have to log in and out using the CC app?
Any and all insight into this area would be very much appreciated.
Thanks!

Yes.
Cheers,
GB

Using two wireless routers for two separate networks

I have one WRT54G router and a newly purchased E2000 router that replaced the WRT54G . I have one DSL connection coming into the house.
I have the DSL going directly into my main E2000 router which runs my existing wireless home network and it does this wonderfully. My son wanted the older WRT54G router to create his own network where he has it set up for his own purposes so I gave it to him. He has everything set up to where we have two functioning networks that do not conflict which is great however he ran an Ethernet cable from the e2000 to the WRT54G to make this happen. This cable is a problem since it basically is about 50 feet of ugly cable running up my stairs to his room. Is there a way to have the routers still work in tandem as they are now to manage two separate networks but to instead have them connected wirelessly and eliminate the existing wired setup?

You would need a third party firmware like DDWRT to do that (it will void the warranty too)
Or you need a wireless bridge like the WET54G or WAP54G set to bridged mode
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

IWeb '09 and creating an "Index" page for two separate sides of my website

I'm redesigning my website with iWeb '09 seeing that I've recently switched to Mac from being a life-long PC/Windows user. I'm not too web programming savvy so iWeb fits my needs as a very good program that redesigns my site very nicely (and quite inexpensively, as well).
My current incarnation of my website (http://www.jeffreykern.com) was designed by a professional web designer on Dreamweaver for PC a couple of years ago. Some time ago when I was trying to update my PC with XP SP 3 (bad idea as it turned out), my connection to my web hosting service got completely fouled up and I lost the ability to update the site and haven't updated my site since. Knowing that I was going to be switching to Mac (with my new Mac Pro) I never had the desire, or energy, to patch things up to update my site with my PC. Plus, I was in need of a redesign so I eventually got my site ready to go with iWeb 09. That's where I stand right now...
So, as you can see on my current site I have a main index page that splits up into the two sides of my life: the triathlete side and the writer side. I've already redesigned both sides of my site with iWeb, I'm ready to update it thru my web hosting via FTP and Transmit 3, but I cannot find how to create a main "Index" page on iWeb that will let me branch off into two different directions. By having that "Index" page intact I will be able to keep my domain of jeffreykern.com as it currently stands. I don't mind having to get two different domains for each of my two sides of my site but would like to avoid that extra step -- if, at all, possible.
Thanks in advance for your help,
Jeff

Building three websites on three separate domain files would be my choice.
Its important to realize that you cannot have a page called "index" using iWeb because the associated index.html file will conflict with the one that iWeb creates.
As has been suggested, the first site would be one page. The site name would be jeffreykern.
This site will publish as jeffreykern_files and an index.html file. Inside this folder is another index.html file. This is the one your domain name will be directed at if you don't need an RSS feed.
If your server allows it, create a root folder on it called "jeffreykern" and upload the contents of the local folder to this and ignore the separate index.html file. Note that I said contents and not the folder itself.
A lot of servers require that you upload to a pre existing folder. In this case you will have to upload the index.html file and the jeffreykern _files folder.
The two other sites are named and published as writer and triathlete. The external index files of these two sites are renamed writer.html and triathlete.html.
These two files and their corresponding folders are uploaded to your root folder on the server after adding tags and optimizing.......
http://www.iwebformusicians.com/SearchEngines/SEO.html
Now you have a main (one page) site with two sub sites.
The domain name http://www.jeffreykern.com/ is directed at the index.html file so that when this is entered into the browser, the main page will appear.
The links to the two main sections, whether they be text and/or image, are created and selected as external hyperlinks.
http://www.jeffreykern.com/triathlete/
http://www.jeffreykern.com/writer/
Clicking these links will open the first page of their respective sites.
If you do the sensible thing and trash the iWeb default navigation to replace it with a custom one, you can include external hyperlinks to the landing page and the other site in this.
The website - iWeb for Musicians - is created like this and is built on 9 separate domain files for ease of updating and publishing. The whole site is tied together with a Main navigation to get to each section which has a Sub navigation to jump around that section.
For more on navigation see.....
http://www.iwebformusicians.com/WebMusic/Navigation.html
Also refer to Fonts, Colors and Navigation on this page ......
http://www.iwebformusicians.com/WebMusic/iWebandInternetExplorer.html

Can the same Apple TV be used for two separate TVs?

We just moved into a new house and need to know if our Apple TV can be used to stream content to the TV in the living room and the TV in the garage, or if we simply need to buy a second Apple TV.
The TV in the living room and the TV in the garage are both wired to the same Denon two-zone receiver. The living room is where we watch all of our TV and listen to most of our music. But the garage doubles as a home gym, so I'd like to be able to either watch videos like P90X and Insanity -- they're all in my iTunes library now -- or listen to music while I exercise. Perhaps this is possible due to the two-zone capacity of the receiver.
I don't need to be able to stream content to both places at the same time, by the way. This is just for the mornings when I want to work out. Right now, the Apple TV is connected to the back of the receiver in the GAME input and works beautifully in the living room. The TV in the garage is yet to be installed, although the wiring back to the original zone is already done. Again, all the speakers and wiring for both TVs will be in the same receiver.
Is the Apple TV capable of doing what we need it to do, or do we need to get another one?

I bet you are searching in the wrong forum for solution.
Since you have a receiver, witch is able to transmit two different signals to two different TVs (just the matter of switch - i suppose?), than, the media being sent from Apple TV just has to be redirected to the 'right' TV witchever you use at that moment.
Different story with the Audio. Dont know if you using the Speakers on the TV's or on separate Audio Systems.
Cheers

Can I create two mail icons in the dock for two separate accounts?

I'm trying to set up two mail icons in the dock - one for my wife's e-mail, one for me - all under the administrator iMac log in. I'm trying to do this without her having to have a separate mac log in. Is this possible? If so, how do I duplicate the postage stamp mail icon and capability?

If there are two users on one Mac, the best approach is to have two user accounts, one for you and one for your wife.
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The new user account will appear to be a whole different Mac, and she can set it up to her liking (different mouse settings, desktop background, Dock appearance, etc.) without affecting anything in your user account. If you enable Fast User Switching, both users can be logged in at the same time, and switch using the right corner of the Menu Bar.
With separate accounts, each persons instance of Mail will be their own and go to their email account.

Should I switch from shared iCloud account with wife to two separate accounts with family sharing?

My wife and I have always shared 1 iCloud accpunt between our our 5s phones, iPad, and an old 4s which is now just a toy for our toddler. With ios 8 I am not sure if it is possible or practical any more. We do it to share purchases and the photo stream and a Google calendar.
With ios 8, it seems to be impossible for both of our phones to share their location. From what I can tell, only 1 device at a time on the icloud account can share its location. Is that a correct assumption? And icloud no longer gives the option for each of us to sign into separate itunes accounts on find my friends. We are forced to sign in with our 1 shared iCloud account. So we can no longer use find my friends to see each other's location.
So has ios8 rending sharing an iCloud account useless? I'm wondering if we now need to have separate accounts and link them with family sharing. Will we lose the benefits of having our 1 shared account? I just wanted to make sure we wouldn't lose anything if I set her up with a new account and linked it with family sharing.

I have lots of questions about this and other things too; I have been sharing my account with my wife and daughter for years through 10s of iPhones and iPads and with the introduction of IOS8 we are having lots of new and not so fun problems.
As to your question about location. I have three iPhones and one iPad using the same account now (on IOS 8) and all four devices show up with Find my iPhone. My wife's was not showing up today but I went in and turned on the new feature "Send last Location" and all of a sudden her phone was able to be found again. Not sure if that will solve your problem but just wanted you to know that I have the four devices all showing up in Find my iPhone with a shared account.

Server 2012 r2 essentials...urgent help needed...Two separate DHCP servers, one for lan and one for wifi...design picture attached

hello
S2012 R2 essentials is in office...Want to have functional 2012 dhcp, dns, ad, wds role for 1gbps wired lan and separate wi-fi for temporary visitors for internet access like gsm phones etc...Need functional anywhere access to office server and computers
for administering...When worker with laptop go out of office must have have full functional wifi.
here is picture what i have in my mind with all components in network.
How to configure L3 switch, router and server? Many thanks

Hi,
Based on your description, I understand that you want to prepare network for the Windows Server 2012 R2 Essentials,
then will run a DHCP Server on the Windows Server 2012 R2 Essentials and correctly configure router. Please refer to following article and check if can help you.
Before You Install Windows Server 2012 Essentials
For DHCP, please refer to following article.
Running
DHCP Server on Windows Server 2012 Essentials
For router configuration, please refer to following article.
Configure a Router - Windows Server Essentials
If anything I misunderstand or any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Working with data from two separate tables

In a report I'm building, I have two tables: "Registration" and "SpecialDates".
In the Registration table has client info specific to an account number. Each account number has a different billing cycle.. either Cycle 1, Cycle 2, or Cycle 3. This is listed for the account number as {Registration.Cyle}. In the SpecialDates table I have three different dates listed for each cycle. So this table looks something like this:
fldCycle          fldPastDueDate
1                     01/11/2010
2                     12/15/2009
3                     1/20/2010
The problem I'm having is I can't link {SpecialDates.fldCycle} to {Registration.Cycle}. I have to somehow make the date from the SpecialDates table show up on the report depending on the value of {Registration.Cycle}. Does anyone have any ideas on how to do this?
Edited by: MarcieHennessy on Jan 27, 2010 7:26 PM

Then I would create a custom table with the Add Command in Data Expert with the following query:
SELECT Field1, Field2, Field3, cast (fldCycle as char(10)) as fldCycle, Field4, Field5, etc
FROM SPECIALDATES
Where you list all the fields from the table you will need in the report, with the link field converted to a string. Then replace the SPECIALDATES table in your linking with the new custom table . Now when you link from REGISTRATION to the new custom table.
Fuskie
Who notes you can rename the custom table to a more recognizable name...

2.X update for two separate itouches

Hello My wife and I were considering upgrading 2 ipod videos we have to itouches. My question is like with my 2 videos anything we download can be synced to both ipods. Is this still true with the itouch and is it also with the itouch updates or would i need to pay 9.99 two times to upgrade their versions. Thanks!

Heh, Im having my own problem with that though, I just bought one of the previous to the new generation of Touch's. 8gig. It came with some kind've old software, and i happened to have a $20 gift card for itunes sitting around. I typed it in, Shows i have $20 in the account but im unable to buy the 2.1 software without entering credit card information. Anyone got tips around this or do i need a credit card for it hands down.

Getting iCal to sync with iCloud for two Macs, and a 3G iPhone

I currently have a Macbook and MacMini both running 10.7.2, and just started using iCloud this week to sync contacts, iCal, bookmarks, etc. I thought I initially had problems with iCal as I was getting two copies of every event showing up on my MacBook, but then realized I had two sets of calanders, ("on my mac" and "iCloud"). After I unchecked the "on my mac" calanders, everything appeared normal.
The problem I face now is with my 3G iPhone that can't run iOS5, and thus, no iCloud. My iCal on my iPhone is set to sync with my "on my mac" calanders, so with those unselected, the events are not showing up on my Macbook, and thus, aren't being synced to my MacMini.
My question is, can I have my 3G iPhone sync to my iCloud calanders everytime I connect it to my Macbook to sync via USB, instead of syncing with the "on my mac" calanders as it is currently doing without have iOS5 capabilities on my iPhone? If not, is there a way to have iCloud keep syncing with my "on my mac" calander list, so that it is always up to date, and data from my iPhone will be synced over to my iCloud calander list from the "on my mac" calander list?
I'm just trying to figure out if I'll be able to transfer new iCal dates I create on my 3G iPhone over to my iCloud calander list, and ideally, vice versa.
Thanks in advance for the help.

I understand that iCloud won't run on it or with it. I'm just trying to figure out if there is a way to sync the "on my mac" calanders (which sync to my iPhone iCal everytime I connect via USB) continually with my iCloud calandars so the two are always up to date.

Customizing the code inspector with check for two executable statements in same line

Hi Everyone,
I have a reuirement to customize the code inspector.I need to create a check 'Two executable statements should not be in the same line'.
While doing so i am facing one problem as in internal table it is capturing the report as word by word with same row number nd different line number.
If anyone have worked on this before then help me out.
I am using CL_CI_TEST_SCAN as superclass and making the changes in the run method.
Regards,
Khushboo

In the source code you will have this in comment right, use the "#EC ENHOK.

SPNego - SETSPN with alias for two separate physical servers

Similar Messages

Maybe you are looking for