Spool Not Visible in SM37
Hi,
I have a program which when executed in background mode doesnot show spool in sm37, but when i go into spool directory.
I am calling the back ground through functional module POPUP_TO_CONFIRM_STEP,
case xx
when 'N'.
sy-ucomm = 'SJOB'.
sscrfields-ucomm = 'SJOB'.
by this background job kicks off but doesnot create spool .. also this problem doesn't occur regularly.
Please provide me some suggestions.
Thanks
Kumar
Sorry small correction for the above problem ..
I could see the spool through spo1 or sp02 but not in the job - overview.
Thanks
Kumar
Similar Messages
-
Spool icon not visible in SM37
Hi,
I have created one classical program using 'Write' statement to show output on screen.
Now i am running this program in background mode by choosing option SE38 -> Program -> Execute in Background
I can see my finished job in SM37. Now issue is that on same SM37 screen i can't view spool icon also when i select job and press button 'Spool', message is triggered saying 'No List available' though for same job, spool is generated and that no. i can see in Job log.
User want to view spool from SM37 screen, instead of copying no from job log and inserting into transaction SP01
Plz help...Hi,
@BreakPoint
I am not touching any print settings while running program in Background mode. Getting spool output is not my problem. Spool is generated properly for my job only problem i am facing is that i can't view that spool from SM37 transaction every time i need to go to SP01 transaction to view output.
Few addition:
Aactually my program has 2 options:-
1. Online mode: here i am generating spool request using below FM
* Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = lw_arcpar
in_parameters = lw_pripar
layout = l_lay
line_count = l_lines
line_size = l_cols
no_dialog = 'X'
IMPORTING
out_archive_parameters = lw_arcpar
out_parameters = lw_pripar
valid = l_val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
2. Background mode: I have used sy-batch to determine background mode. If program execution is in background then above FM will never trigger. In short for Online mode i am explicitly creating spool using FM
If program executed in online mode first and then Background then i am getting above issue.
Anything i am missing?
Edited by: Amol Deshpande on Oct 19, 2010 7:25 PM -
Spool list not available from SM37
Hi All,
We have scheduled a job and running successfully.
But spool list not displayed from SM37, whereas spool request generated in SP01 at the same time when the job is completed.
We've checked with the developer and they dint find anything wrong from program end.
Kindly suggest what is going wrong here.
Thanks in advance......Hi,
Apply the following SAP notes to resolve this problem:
1372936 - Spool lists no longer displayed from SM37 after SP
1174127 - Job refers to incorrect spool request
regards,
Aidan -
Some background jobs not shown in SM37
Dear Friends,
Some of my background jobs are not shown or visible in SM37. But, it is available in TBTCO, TBTCP & TBTCS tables. These jobs are scheduled in daily basis. These tables having records for all days of missed jobs.
I dont know, why it is not comming in SM37. I tried in many search parameters in SM37 like prog. name, date and so on.
These missed background jobs are not comes in spooler (SP01) also.
Kindy, suggest me to find out the missed background jobs.
Thanks in advance
Regards,
Rajagopal
Chennai - INDIA.Hi rajagopalan,
Normally this should not happen. Make sure the following in sm37:
a. The start date is : 01.01.1800
b. The end date is : 31.12.9999
c. All the checkboxes (six checkboxes) are ticked.
d. username = your username
e. jobname = *
SM37 gets records from the view V_OP (containing TBTCO and TBTCP)
and filters for username using the field SDLUNAME.
So you can basically cross-check if the count is atleast correct or the jobs were of different user (fieldname in the view/table) etc. (From SM37, you can export to excel and check the count)
regards,
amit m. -
Spool not generated in some condition
Requirement :Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
Problem When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible.
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
Statement at top
REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
NO STANDARD PAGE HEADING
MESSAGE-ID ZOLSC_AS
LINE-COUNT 65
LINE-SIZE 148.
It works if I set line-size as 132 .
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
DEPARTMENT = L_C_SYSTEM
DESTINATION = L_C_LOCL
EXPIRATION = L_C_2
LAYOUT = L_C_X_65_255
LINE_COUNT = L_C_65
LINE_SIZE = L_C_255
LIST_NAME = L_LIST_NAME
LIST_TEXT = L_LIST_TEXT
MODE = 'BATCH'
NEW_LIST_ID = G_C_X
NO_DIALOG = G_C_X
RECEIVER = L_C_SAP
RELEASE = G_C_X
SAP_COVER_PAGE = G_C_X
REPORT = SY-REPID
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4
IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
G_SPOOL = 'X'.
ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
SonalHello All,
I checked in SM58. It showed an error.
I checked my function module attributes. It was normal. Changed it to Remote enabled.
Now spool is generated.
Regards,
Kausthub -
Automatic payment program spool not created
HI Exeperts
i am assing same role both users both user while doing f110 posting one use is succesed and another user was some time was sucesse ful and sometime getting error spool not created i tested in testing client same role here sucess.i checked in sm37 also but no error user go to sp02 some time he can display. whenever got the errore massage he cann't see the display option.i cann't understand this problem.
any body help me.
thank's
chandra.Dear expert
My guess is your user SPAD - ADMIN ( Check over there )setup is incomplete, but as this is generally a BASIS responsibility
spool requested is not created.
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/payment-program-f110-is-not-creating-spool-nor-print-1848411#M1851567
Regards
Ajeesh.s -
Printers are not visible in Print management
Installed print server feature in Windows server 2012 .We have added few printers in server, but these printers are not visible in printers section of Print management console.Even the default Microsoft XPS writer is not showing up.
Restarted Spooler service and reinstalled print management console.Server DNS record looks good too.
Able to view the printers in "Device and printers" .They are not visible only in print management console.
ThanksHi Daemon_Joker,
Please check if some necessary updates need to be installed. Please run
sfc /scannow command to scan all protected system files.
Meanwhile, please use
Get-Printer PowerShell cmdlet retrieves a list of printers installed on the computer. Did all printers display correctly?
In addition, please open Print Management, click Printer Servers, expand
your printer server, then right click Printers and select “Add Printer…”. Please check if you will be able to find printers via this wizard.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
Email Address not visible for output device MAIL in created batch job
Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
Detail in the batch job
1) In print parameter screen of the step in the batch job
-Using output device MAIL (output type ZPDF1)
-inputting email address of receiver in the EMAIL ADDRESS field
2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
4) User receives email with pdf file from the batch job.
How to change/display the email address of the receiver in the created batch job?
Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
Email Address Field via Tx. SM37.
Pls kindly suggest, thank you very much in advance.Hi Srirompoti,
After saving the job if the job has not started then you can follow the below steps to change the Email address.
1. View the job from Txn SM37.
2. check the check box for your job that you want to change and goto menu path "Job->change
3. in the next screen goto "Edit->steps." or press "F6" key
4. place the coursor on the job and goto menu path "Step->change->print specifications.
5. here you can change the email address.
If you are not able change the data then you might not have authorization. -
Spool Not Generated Conditionally
<b>Requirement :</b>Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
<b>Problem </b> When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
<u>I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible</u>.
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
<b>Statement at top </b> REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
NO STANDARD PAGE HEADING
MESSAGE-ID ZOLSC_AS
LINE-COUNT 65
LINE-SIZE 148.
<u><b>It works if I set line-size as 132 .</b></u>
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
DEPARTMENT = L_C_SYSTEM
DESTINATION = L_C_LOCL
EXPIRATION = L_C_2
LAYOUT = L_C_X_65_255
LINE_COUNT = L_C_65
LINE_SIZE = L_C_255
LIST_NAME = L_LIST_NAME
LIST_TEXT = L_LIST_TEXT
MODE = 'BATCH'
NEW_LIST_ID = G_C_X
NO_DIALOG = G_C_X
RECEIVER = L_C_SAP
RELEASE = G_C_X
SAP_COVER_PAGE = G_C_X
REPORT = SY-REPID
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4
IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
G_SPOOL = 'X'.
ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
SonalUse FM : RSPO_OUTPUT_SPOOL_REQUEST
Reward Points if it is helpful
Thanks
Seshu -
Spool not generated for some conditions
<b>Requirement :</b>Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
<b>Problem </b> When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
<u>I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible.</u>
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
<b>Statement at top </b>
REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
NO STANDARD PAGE HEADING
MESSAGE-ID ZOLSC_AS
LINE-COUNT 65
LINE-SIZE 148.
<u>It works if I set line-size as 132 .</u>
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
DEPARTMENT = L_C_SYSTEM
DESTINATION = L_C_LOCL
EXPIRATION = L_C_2
LAYOUT = L_C_X_65_255
LINE_COUNT = L_C_65
LINE_SIZE = L_C_255
LIST_NAME = L_LIST_NAME
LIST_TEXT = L_LIST_TEXT
MODE = 'BATCH'
NEW_LIST_ID = G_C_X
NO_DIALOG = G_C_X
RECEIVER = L_C_SAP
RELEASE = G_C_X
SAP_COVER_PAGE = G_C_X
REPORT = SY-REPID
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4
IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
G_SPOOL = 'X'.
ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
SonalHi,
All spool requests will be stored in TSP01 table
TSP01 - Spool Requests
field name for Spool request number is RQIDENT
Hi,
Take a look at OSS Note 422136 which states:
"2. You can only store one spool request even if a step generates several spool requests during processing. The application is responsible for a "spool overview" in this case. If a step generates several spool requests during processing, only one request can be stored. In this case, the application report should issue the number with a message when writing a spool request so that it is then displayed in the job log."
Also take a look at OSS Note 519059 which further supports the case that you must capture the individual spool numbers as they are being created (i.e. within the job step's program). The note contains the following:
8] Question: How are the spool requests assigned?
Answer: The step information is stored in table TBTCP. This has space for exactly one spool request (field LISTIDENT). If a step generates several spool requests during the processing, only one can be stored. In this case the application is responsible for a "spool overview
<b>Reward points</b>
Regards -
Request id not visible in Manage
Hi BW Experts,
Has anyone experienced having a Request id of data in an Infocube, which was not visible via the "Manage"? If so, how do ensure this doesn't happen?
The data was "deleted", but when doing Listcube the data is still showing. There was a database error of 913 during the deletion of the data, but there was not an error raised in the sm37 job log. It actually said it was successfully deleted.
Version 3.0b sp22
Any help will be appreciated.
Thank you!Hi,
I am not sure as to how this inconsistent deletion happened. In my experience this is not a scenario that happens regularly. It has not happened to me at all - Deletion of requests are being handled in Process Chains.
Here is a link to a 'best practices' document for the BW administrator.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
BR/
Mathew.
Edited by: Mathew Muthalaly on Jul 23, 2008 6:02 AM -
External hard drive not visible in disk utility or finder
Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
BruceAn update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce -
Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
DaveHi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave -
IDOC not visible in IR but metadata successfully imported
Hi,
I have this wiered issue.
I want to import IDOC WPUSKR01 (cashier productivity) from BI.
But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
But I can manually import the metadata from BI in idx2.
Now how to import this in IR?
I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
Regards,
Anirudh Vyas.Hi,
In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
I have checked all the segments in we31, they are all released.
But it gives error:
Error: IDoc type WPUKSR01 contains errors (unable to read segments)
Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
But the same thing is failing in BI. I have SAPALL permissions in all the systems.
Can I use Idoc imported from R/3 in scenario for BI?
regards,
Anirudh. -
How can I add a device to my library? My e-reader is registered but not visible.
Hello,
I use a Tolino Shine and can download E-Books via WLAN directly to it. I can also download the books to my netbook. However, when I plug the Tolino into my netbook it is not visible in the Adobe library and I cannot move books from the library to the Tolino.
I tried to reset the Tolino to the manufacturer settings. This did not improve the situation.
Any suggestions?
Thanks a lot!http://www.apple.com/icloud/find-my-iphone.html
any chance of it working on non-apple phones?
No, it requires the operating system iOS, only available on Apple Devices.
Maybe you are looking for
-
I am trying to setup VPN with QuickVPN
Hi I am trying to setup VPN with WRVS4400N and Quick VPN on client side. I am fairly new to VPN and did some research and looked through the manual but can't seem to get it to work so far and from what I noticed many people are having this problem. S
-
Export records into a flat file
Hi... I have to export some tables into a flat file. The output must be like this: insert into table (col1, col2.....) value (one, two......) insert into table (col1, col2.....) value (one, two......) insert into table (col1, col2.....) value (one, t
-
GL account & Financial Statement Version reg
Hi I would like know, when I create a new GL accout, will that GL account will get assigned in the respective group of FSV (Finanical Statement Version) automatically or do I need to assign it manually ? Thanks in advance for your reply. regards,
-
Compilation Albums in Itunes 7.0
A problem I have yet to see on these boards with 7.0 Compilation albums will not display in track order (or play in track order!) Some of them seem to go into artist order on the album and I can't work out what the order is for others - it doesnt pla
-
Link a pdf file from flash for download?
I want to know how to link a pdf file from flash and make it availble for download?