Spool Percentage with sp01

Hi SAP gurus,
I want check spool request number in percentage with transaction sp01,Iam getting with transaction rz20 percentage of spool.I want check it with sp01.Please help me.
BR,
kk

Hello KK,
This is BI forum and I think you will get best reply at Application server forum: /community [original link is broken]
Regards,
Frank

Similar Messages

Spool request with more than 255 columns

Hi,
Please let me know what formatting type has to be used to have spool output with more than 255 lines.
X_24_80_JP        L      ANY           00024   00080   ABAP list HR Japan: At least 24 rows by 80 columns
X_44_120          L      ANY           00044   00120   ABAP/4 list: At least 44 rows by 120 columns
X_51_140_JP       L      ANY           00051   00140   ABAP list HR Japan: At least 51 rows by 140 columns
X_58_170          L      ANY           00058   00170   ABAP/4 list: At least 58 rows by 170 columns
X_60_80_JP        L      ANY           00060   00080   ABAP list HR Japan: At least 60 rows by 80 columns
X_65_1024/4       L      ANY           00065   01024   ABAP List: At Least 65 Lines 4*256=1024 Columns Four-Sided (Only for SAPlpd)
X_65_132          L      ANY           00065   00132   ABAP list: At least 65 rows by 132 columns
X_65_132-2        L      ANY           00065   00132   ABAP List: 2-column 65 characters 132 columns (only for SAPLPD from 4.15)
X_65_200          L      ANY           00065   00200   ABAP list: at least 65 lines with 200 columns (not for all device types)
X_65_255          L      ANY           00065   00255   ABAP/4 list: At least 65 rows with a maximum number of columns
X_65_256/2        L      ANY           00065   00256   ABAP list: At least 65 lines 2*128=256 double columns (SAPLPD only)
X_65_512/2        L      ANY           00065   00512   ABAP List: At least 65 Lines 2*256=512 Columns 2-sided (Only for SAPlpd)
X_65_80           L      ANY           00065   00080   ABAP/4 list: At least 65 rows by 80 columns
X_65_80-2         L      ANY           00065   00080   ABAP List: 2-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_65_80-4         L      ANY           00065   00080   ABAP List: 4-column 65 characters 80 columns (only for SAPLPD from 4.15)
X_90_120          L      ANY           00090   00120   ABAP list: At least 90 rows by 120 columns
X_PAPER           L      ANY           00010   00010   ABAP/4 list: Default list formatting
X_PAPER_NT        L      ANY           00001   00001   ABAP/4 list: Obsolete (do not use)
X_POSTSCRIPT      L      ANY           00001   00001   Pre-prepared PostScript
X_SPOOLERR        L      ANY           00001   00001   ABAP list: Spooler problem report
X_TELEX           L      TELEX         00001   00001   Telex: 69 characters wide, only as many lines as supported by TTU
ZABC_SAP        L      ANY           00065   00550   LCM Report Page Type
I have created a custom Format Type with 65*550 (ZABC_SAP) , but still the output gets truncated in the spool.
In sp01 . For the spool request ... If it displayed in Graphical layoout ... Output is getting truncated but when we see in Raw format .. i can see the entire output. But it is not at all formatted.
Thanks,
Tanuj
Message was edited by:
        Tanuj Kumar Bolisetty

Hello Tanuj,
You need to use a page format greater than 255 columns for sure. However still if it does not solve the issue then you may consider using the note 186603.
PS: I guess you are on a higher release than 4.6 C . For this release this note íIt has a text attachment for a report tat allows to display such spool requests.
Regards.
Ruchit.

How to get spool along with e-mail or FAX

Hi,
I have a requirement where i have to produce a spool even i go for e-mail or FAX option when the script is triggered.
I am using a standard program where it is coded to have either of the option. i.e. either we have to go for a printer or e-mail or FAX.
Could any one suggest me how to get spool along with e-mail or FAX option.
Thanks in advance.

Hi,
check this:-[http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm]
hope u'll get some idea.
Regards,
Sneha.

Spool disappears in SP01 after exception raised or exiting application, but remains during LEAVE TO SCREEN '0'.

Hi Experts,
I'm using FMs SSF_OPEN and SSF_CLOSE to display multiple smartforms. After SSF_CLOSE the spool appears in SP01, when I exit the application (exit application and debugger) or raise an exception after FM SSF_CLOSE, the spool disappears from SP01.
But if after SSF_CLOSE, I put SET SCREEN '0'. LEAVE SCREEN - which supposedly should exit the program, the spool is not being deleted from SP01.
My question is, is there any way to commit the spool in SP01 even if I close the application or raise an exception? Should the code "COMMIT WORK", work for this requirement?
Thanks in advanced,
Jack.

Hi All,
I've solved this using COMMIT WORK

IN bapi- how to provide spool report with messages

in BAPI, how to provide spool report with messages?

>
sujan T wrote:
> Thanks for your reply.
>
> What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
>
> Regards,
> Sujan
no special logic is required
If u want to use
RPUAUDOO IN THE ZREPORT.
Put the submit button where ever required
ex: In zreport after certain process reacedu want to call then use
submit rpuaudoo and return.
Regards
Sas

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Spooling data with Header and trailer

Hi everyone,
I have a problem in spooling the data.
I get a .dat file to load into db .That .dat file will be having header,records,trailer.While loading into the db i load only the records .
I load the .dat file into table using sqlldr with direct= true and parallel=true.
I load data into one table.header and trailer into one table(Loading into two different tables using three control file each for header,records,trailer to load from same .dat file).But while spooling the data out after some modifications to the table.i need to spool it with the header and trailer.I am able to spool only the records but not header and trailer.
That header and trailer are in standard form,everytime i get the .dat file.
Help me how to spool data from a table with the HEADER & TRAILER in the spool file.
Thanks

Some may argue this is not the right forum - database general might have been a little been than downloads - but now the thread is here I'll try an answer.
As I see it It depends on your spooling tool.
Lets assume you are using sqlplus.
I that case the sql prompt command may serve your purpose
Alternatively
select 'header' from dual
union all
select field1||','||field2||','field3 .... /*must single string expression but may concatentate field */ from somtable
union all
select 'trailer' from dual;may suit.
However I fear either I have not understood the question or if I have understood the question that you may have difficulties implementing this.
Edited by: bigdelboy on 19-Apr-2009 14:32

Spool file with sysdate

How create spool file with current date and time?
I want to create spool file like xyz_28062010.
Please, suggest.

like:
In SQL*Plus this is what you can do to get the current date/time as part of the spool file:
============================================================================================
SQL> column tm new_value file_time noprint
SQL> select to_char(sysdate, 'YYYYMMDD') tm from dual ;
1 row selected.
SQL> prompt &file_time
20020816
SQL> spool C:\Temp\logfile_id&file_time..log Reference: Creating a spool file with date/time appended to file name
Edited by: Gj on Jun 28, 2010 11:45 AM

Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using

Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using plz help me..

Maximize iPhone Battery (iOS7):
1) Turn off Airdrop: Control Center >AirDrop > Off
2) Limit background app refresh. Turn it off for applications such as Google/Facebook.Settings > General > Background App Refresh
3) Turn off automatic updates: Settings > iTunes & App Store > Updates and Apps (off)
4) Unneccessary Location Services: Settings > Privacy > Location Services > System Services > Off (uncheck as needed)
5) Turn off Paralax: Settings > General > Accessibility > Reduce Motion
6) Siri, and her 'raise to speak.' Turn it off: Settings > General > Siri > Raise to Speak
7) Exclude items from Spotlight search as needed: Settings > General > Spotlight Search
8) Remove unneccessary notifications: Settings > Notification Center > None (per app basis)
9) Make sure auto-brightness is on, or reduce the brightness to 25% or less if desired.Settings > Wallpapers & Brightness
10) Use Still backgrounds only: Settings > Wallpapers & Brightness> Choose Wallpaper
11) Fetch email instead of "Push": Settings > Mail, Contacts, Calendar > Fetch New Data >Push(off) & Fetch every 15 minutes
12) Disable LTE if needed: Settings > Cellular > Enable 4G/LTE (OFF)
13) Reduce Autolock: Settings > General > Auto-Lock > 1 Minute
14) Disable Vibrations with Ring: Settings > Sounds > Vibrate on Ring (off)
15) Close Applications regularly: Double Tap Home Button > Swipe up on App to close

Saving spool request with multiple Adobe PDF files to local directory

Hi,
I have a spool file with multiple Adobe PDF files in it. You can only save the spool content to local directory by opening and save each PDF files. Does anyone know whether there is a way to combine all the PDF files within a spool into one big PDF file?
Chuin

Are you using any plugins, like PDFlyer?

Battery problem after enabling battery percentage with ibackupbot

My battery on my iPod touch 5g drains faster after I added the battery percentage with ibackupbot. Does anyone who did this have the same problem?
Before my battery drain to 93% of constant usage ( wifi on,checking email, browsing safari, etc ) in about 1 hour and 25 minutes; now it goes to 93% in 45 to 50 minutes.
Also when I charge my iPod it gets only to 95% and stops charging, and when I unplugged it, it reads 99%.
Please help if you guys know how to fix this..

Restore to the iPod to factory settings/new iPod.

Why doesnt the Ipod touch 5th gen have Battery Percentage with IOS 7?

I read that the Ipod touch 5th gen will have battery percentage with IOS 7. But so far it doesnt. Just wanted to know if this was a lie or if something happened and apple decided to remove it.

"Battery percentage in status bar added to iPod Touch (5th generation)"
I seen this
and i have seen pictures of the Ipod touch with the percentage next to the battery on the apple website.

Calling Transaction SP01 (Display spool requests) with parameters via URL

Hi,
I would like to be able to list all spool requests of a certain title via a URL.
Unfortunately ITS does not seem to work. A URL constructed like this
http://host:port/sap/bc/gui/sap/its/webgui/!?sap-system-login-basic_auth=X&sap-client=500&sap-language=EN&transaction=SP01&S_RQTITL-LOW=Testing123&okcode=CRET
causes a short dump that SP01 (Program RSOSP01NR) is a Module Pool.
I am therefore considering the following options:
1. BSP Program
2. Java WebDynpro
3. ABAP WebDynpro
Ideally, I want to be able to enter in my browser something like
http://host:port/<BSP_or_WebDynPro_stuff>&~title=Testing123
and for this to show in the browser a list of all spool requests that are named "Testing123".
Can someone advise whether any of the above options are preferable?
Also, whether such a program should call transaction SP01 with parameters (skipping first screen) or look to using the associated function modules.
Many thanks for any assistance.
Regards
Adrian

Solved myself. Thanks

Spool title in SP01

Hi friends! I need a help. I have an custon sapscript for print NF invoice. The user ask to set an custon title for NF Invoice print at SP01. How Can I do this?
Thanks for any help.

Sorry friends. Its a brazilian document, "Notal Fiscal". SAP has transaction to configure a Sapscript form and a program to print this document with transaction J1B3N. When I put 'Output' command in menu, the document is generated at SP01 in spool, but the title is generic, like NF0000003_XX and user wants to change this...
Thanks for any help.
Edited by: Fulvio Valente on Oct 14, 2009 2:01 PM

Cant see Spool history at SP01: Urgent

Hi Experts,
I'm having problem looking at the history of spool request. I have a printer xyz and xyz 2, user printed many pages and used both of the printers. But when i go to sp01, and I do able to see history of completion for xyz2, however, there is nothing for xyz. I just confirmed with user that pages has been printing.
Please advice.
Thanks,

Hello Afi,
Check with the user. He might have used the option delete spool after printing. Also was the printing carried out in the same clienta? May be you don't have authorization for cross client spool viewing.
Regards.
Ruchit.

Spool Percentage with sp01

Similar Messages

Maybe you are looking for