Spotlight Storage not accurate after encryption
I am wondering if I am doing anything wrong here. I have encrypted my drive using FileVault 2 on my MacBook Pro. I have also cleared the Spotlight and had it reindexed using the proper terminal commands. After the computer doing its thing for an hour or so and finished with the index, I am having a problem with it showing the proper allocation of files.
Is anyone else having this issue? How do you fix it?
Thank you
Spotlight isn't recognizing the file types.
Disk Space - Other
Similar Messages
-
COM object model not functioning after encrypting the word document using office extention
After encrypting A word document using office extention, it seems like the COM object model becomes unusable. I cannot not manipulate the encrypt document through COM interface, nor can I write macro VBScript to do some operation on the docuent.
For example, I create a word Macro with some simple code.
Sub hi()
Dim i As Integer
i = ThisDocument.Fields.Count
MsgBox i
End Sub
If the document is not encrypt, then we will see a msgbox which tells us the number of bookmarks in the current document.
Now, encrypt the word document using the office extention, running the macro code will fail with error code " 80004005" and error message:Method 'Fields' of bject 'ThisDocument' failed.
It is very important for us to manipulate word documents through COM interface in our system, I want to know why the COM interface does not work anymore after the document is encrypted.I take macro script as an example to demonstrate that word COM object model cannot be used after encripted. Actually you can reproduce the same problem when you manipulate word document through COM interface using any programming language.
For example, you can create a text document with the following VBscript:
set a = createobject("Word.Application")
set doc = a.Documents.Open("E:\temp\test.docx")
msgbox doc.Fields.count
doc.close
a.quit
Save the document with ".vbs" file extention and then run it by double clicking it. it will fail if the document is encrypted using the office extention. -
WRT160NL Usb storage not recognized after firmware update
Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
Color not accurate after render...
I'm not sure if i have some settings that are wrong or my color grades are 'bad' but after I do my color grading and then render it back to FCP, or just watch it as a QT movie, the color of the clips are not the same as what is shown on the scope.
Its never a huge difference, with the project I am working on now the clips seem to always come out redder... and slightly darker/contrasty. There are other differences with other clips too.
Exporting as Apple ProRes 244 HQ
IPF: 8-bit (Not to sure what this is thought)
If anyone can inform me if this is normal or just some advice on the matter please
EI expect you are doing your color work on the same monitor as your editing display, so you're wondering how the same clip can look different when played back in different applications. COLOR does not obey Quicktime ColorSync settings (with onboard GPUs) and is set up to deliver media appropriate for broadcast or digital cinema.
Depending on your various OS settings (Snow Leopard is the only OS to standardize a gamma 2.2 Rec709-like space across its platform), once you exit COLOR, your Quicktime movies will be once again subject to whatever "calibration" tweaks OSX has decided it needs to apply for display on your monitor, whatever it might be. There are also oddities in re-scaling and re-mapping between different Quicktime codecs that is a source of confusion among applications.
Not knowing any other details, its not possible to make any more than a general statment.
jPo -
Why icloud storage not update after purchased
Hello,
I have problem with ICloud storage. I have purchased for upgrade from 5GB(Free) to 20GB but my storage still full.
I purchased 2 times but nothing happen to my ICloud storage.
Please help me.Hello tiaapeterss,
Thanks for the question. If I understand correctly, you want to know when the upgrade happens. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iCloud storage upgrades and downgrades - Apple Support
Your plan is upgraded immediately, and the new monthly payment date is updated to reflect the purchase date for the new plan. You'll be notified by email each month about 7 days before the monthly payment for your storage plan is due. Your storage upgrade is billed every month unless you cancel by downgrading your storage plan.
Thanks for using Apple Support Communities.
Have a great day,
Mario -
Hard Drive storage not accurate?
I have a 2TB hard drive on my MacPro 2x2.8QuadCare that I get a message that the hard drive is almost full. When I try to see what is taking up so much space, I can't figure it out. When I add up the space taken by the folders that show up on my hard drive, it comes out to less than 1TB. I should have another terabyte of free space. Am I missing something. I haven't had the hard drive that long and it's hard for me to think I could have added that much data/applications/photos/video in that short of a time.
Thanks. Here is what I got from the /Volumes:
2TB Seagate (Alias ofhard drive in bay 2)
Backup HD 3 (Alias)
Fantom 2TB Backup Drive (No Access)
Fantom 2TB Backup Drive 1 (No Access)
Fantom 2TB Backup Drive 2 (Alias)
HD3 (Alias of hard drive in bay 3)
HD4-Photos-Videos (Alias of hard drive in bay 4)
iDisk (Alias)
MAC-PRIMARY-HD-SEAGATE (Alias of the drive in question)
Macintosh HD (Folder)
md4peace (Another Alias of iDisk)
My backup-duplicate (Alias)
NO NAME (Alias of boot camp volume on a different drive)
OmniDiskSweeper (Alias)
OWC Mercury Elite (Alias of external drive)
Peter McCollum's Public Folder ( Empty folder – this folder resides on a different computer in our house)
VideoBrowser (Alias of a disc currently in the optical drive)
Does this look OK? Should I try to delete any of them? -
Encrypted Pictures not readable after cut and past on my laptop
Hi,
I have cut and past my pictures from my BB Bold ans as they are encrypted (.rem) I cannot open the files in windows.
I see after that i have to use desktop manager to move the files and uncrypted them.
But now when i tried to move again the file ot my BB, the files are not recognized by the terminal ..
do you know if a method exist to be able to recover the pictures ?
thanks in advance for your help and supportIf I read you correctly, you are describing the performance of BBOS and content protection (encryption) and not a malfunction.
Here is some information that should help you.
- if you copy and paste a file that is encrypted, it remains encrypted, as you found
- if the file is encrypted (.rem extension) and you use the desktop software to copy or sync, the copied file on the computer is not encrypted, as you found
- when you enable encryption, the files that are already on the SD card remain unencrypted, and only files that are written or modified after encryption is enabled will be encrypted (again, this is BBOS)
- I'm not sure about files in device storage memory, so you will need to test unless you look it up or someone answers, but I'm assuming when you enable content protection all of the files in this location will be encrypted
- for files that are encrypted (have .rem extension) if you disable content protection and then act on the file, the encryption will be undone (and .rem extension removed) -- acting on the file can be moving it, renaming it, etc -- and files that are encrypted and not acted upon while content protection is disabled will remain encrypted
- Ira -
Memory does not get released after encrypting/ decrypting files.
I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks. -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly. -
Spotlight not working after fresh install of Mac OS X
Hi,
I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
Can anynody suggest anything? Your help would be highly appreciated.
Thanks,
AdityaHi Tom,
Thanks for the reply and the link.
I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
Is there a work around for this, can I get spotlight to work again?
Thanks,
Aditya -
HT5527 What will my iCloud storage capacity be after the extension if I do not upgrade?
What will my iCloud storage capacity be after the extension if I do not upgrade?
If you do not upagrede it will be 5GB, the free plan.
-
Spotlight not working after upgrade to Snow Leopard
Spotlight has not been working properly since I upgraded from Tiger to Snow Leopard. I only get partial results. I can see files in Finder that Spotlight is not picking up. It does not pick up most of the items it should.
I've reindexed and that doesn't help.
It worked perfectly before the upgrade.
Does anyone have a fix?Try adding every drive to Spotlight's Privacy Pane in System Preferences>Spotlight, wait a few minutes & remove them, then wait a few hours/days to see if it's better.
Though slower, in the intterim, you might try...
EasyFind...
http://www.macupdate.com/info.php/id/11076
Find Any File...
http://www.macupdate.com/info.php/id/30079/find-any-file
I've actually disabled the worst Searh utility/Function I've ever seen on most of my Macs, just keep Spotlight active on a couple to try to assist with all it's problems. -
After updating to 4.3.5, spotlight does not search within text messages
HI,
I just updated my iPhone 4 to 4.3.5 and Spotlight does not search within the text of my SMS text messages any more. It only searches by the name of the SMS senders. There does not seem to be any setting I can adjust and I have restarted the phone several times but nothing changed.I figured out how to get it working while retaining your data.
Connect your phone and perform a full backup.
Erase all data/media or restore the phone
Select setup as a new iPhone when prompted in iTunes. Give it some other name (i.e. "New").
Grab a copy of iBackupBot from here http://www.icopybot.com/itunes-backup-manager.htm
Run iBackupBot and select the new backup
In the file list, locate the file name SystemConfiguration/preferences.plist
Open the plist be double-clicking on it.
Copy the contents of this file to clipboard.
Select the full backup of your iphone under it's original name (make sure to grab the one with the latest date).
Locate SystemConfiguation/preferences.plist
Scroll to the bottom and note the Hostname for your phone.
Replace the contents of this file with the that from the "New" backup making sure to change the hostname and phone name in the last section of the plist.
Save the changes to the plist.
Connect your iPhone to iTunes
Right-click on it and select "Restore from backup"
Locate the latest backup under your phone's original name
When it's done restoring and reinstalling your applications, you should once again have push notifications that work over the cellular network. -
After encrypting with filevault 2 on mountain lion, safari is extremely slow
after encrypting with filevault2 on mountain lion, safari is running extremely slow.
it's taking more than 45 seconds (sometimes a full minute) to load pages.
my internet speeds are 35 mbps download and 6.35 mpbs upload, so it's not my internet connection.
i have deleted the cache files and the system preferences.
i'm finding that chrome is faster, but i'm seeing slowness there too.
in encrypted using filevault 2.0 yesterday, all software is up to date.
can anyone please help me with this? i don't want to have to turn off filevault.
thanks!Problems such as yours are sometimes caused by files that should belong to you but are locked or have a wrong owner. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID \) -ls
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, edit before posting, but don’t remove the context.
Maybe you are looking for
-
Getting parent-child data from a single column in a table
Hi, I have a parent-child data in a column. Eg: 0 00 01 010 011 1 10 11 These values are present in the single column itself. My need is to get the parent values for the given child value. For eg: If I am giving the input as 011, the query should ret
-
Hi All, Can anyone help to understand all Action Links in obiee 11g. Thank You, Ram.
-
HP MediaSmart DVD won't play anymore (HP HDX 16 laptop)
Three days ago I used it to play a Blu Ray and it worked fine. Now it won't play blu rays or dvds anymore. What happens is when it opens and it says disc is ready to play, it doesn't go any further than that. When I hit the play button, the "read
-
Automatic PO from PR from MRP for transfer between plants
Hi, We want to use the automatic creation PO with tcode ME59. this scenario is clear when the purchase is from a supplier. but ¿this can be used also for transfer between plants? For example we don´t have info records for transfer this material to on
-
How can I save my interface preference in InDesign CC?
I'm working in InDesign CC and I prefer to have my interface set at "Light" instead of the new dark interface that is the default. I made sure no documents were open, went to Edit/Preferences/Interface and selected my choice. But whenever I start InD