Spring Tools Suite and vSphere Web Client plugins

Hi, I am new to this environment. I am developing VMware vSphere Web Client plugins. In the setup for vSphere Web Client plugins, it is indicated that the preferred tools include Spring Tools Suite, which is a derivative of Eclipse. It is an optional component to use the FlashBuilder tool. Optionally, the VMware documentation indicates that you can use Eclipse instead of the Spring Tools Suite, but different setup is needed.
I am posting here (instead of VMware/STS) for the following reasons. I am able to set up the environment without the FlashBuilder tool. I am able to develop Web Client plugins without the FlashBuilder tool. However, I believe the FlashBuilder tool will make development easier. When I try to get the FlashBuilder to load, I no longer can get things to work; I cannot develop Web Client plugins. Lastly, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I will not be able to purchase the product if I cannot get the trial version to work.
FlashBuilder has a plugin installer for Eclipse. I have tried to install the plugin to Spring Tools Suite, and I have tried to install the plugin to a regular version of Eclipse. In either case, the problem I run into is that I cannot locate the VMware files, and doesn't have the virgo service which is present when I did not have the FlashBuilder plugin installed.
Does anyone have any experience or familiarity in getting FlashBuilder to work in this type of setup? Clearly it is doable, but using all of the documentation that I can find online, I cannot get FlashBuilder to work in my environment.
Thank you for any help or suggestions you might have.

Oh sorry, I thought that I had. I had gone to "contact adobe" and clicked on "customer service". It then told me to "select a product", to which I chose "Flash Builder". I then had to tell it that the question was in regard to "downloading, installing, setup" (of said Flash Builder). From there it told me I can ask the community or call a representative... when I clicked "community" I thought the initial "Flash Builder" setting that I chose would apply to where the question got posted, but it seems it did not.

Similar Messages

Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
The airco system gives an error:
Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
Advanced info: ssl_error_no_cypher_overlap
The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

Task name is shown different on vSphere web client 6.0 and vsphere client 6.0

I have created a task on vCenter 6.0.
Task name as is shown different on vSphere web client 6.0 and vSphere client 6.0.
Task name is shown correctly on vSphere client 6.0.
But on vSphere web client 6.0 there is additional '.label' attached at end of task name.
Attached web client screenshot for reference.

Hello,
Task name is localized using the following key:
taskInfo.getDescriptionId() + ".label";
You can go into the following folder:
/etc/vmware/vsphere-client/cmCatalog for linux
C:\ProgramData\VMware\vCenterServer\cfg\vsphere-client\cmCatalog for Windows
and look for your localization file.
Regards,
Peter

Performance Monitoring and the Web Client

I am a project manager managing a large infrastructure upgrade with a migration of existing VMs.
I want to understand how my current VM are performing and the tool I have is the vSphere Web Client 5.1.
I want to get more trending data on disk I/O and Network use.....I cannot get this data with this tool.
I do not have access to the host to run the command line tools. What can I do? I also do not want to buy VCOPs either.

Hello dfery123,
Have you tried Monitoring Inventory Objects with Performance Charts (vSphere 5.5 Documentation Center - Monitoring Inventory Objects with Performance Charts)?
Regards,
Todor

Property default value in presentation doesn't work in vSphere Web Client.

Hi,
Some of my default values don't work in the vSphere Web client.
Here is an example :
The user need to choose a date, this input parametter is called "FormDateRealisation".
In the next step, I have a user interraction with external input called "AppDateRealisation", that is an attribute. In the presentation, this parameter as a Default value property set to "#FormDateRealisation".
It work perfectly in the Java client, but when I try the workflow in vSphere web client, the default value doesn't not work.
Does anyone have an idea how to solve this ? I already found a solution to bypass this bug (Creating a script to transfert the input to the attribute)... But I would like to use the default value.

Hi,
I opened a ticket, they didn,t found the solution. But we found those logs:
Execution of action com.DemandeServeur/EspaceDisqueMultiple10 returned a javacsript 'undefined' value. Perhaps a return statement is missing in this action ? Will be converted to null.
Here is my code of "EspaceDisqueMultiple10":
Return type: string
Input: InGBHD (number)
if (InGBHD%10 != 0)
return "L'espace disque doit être un multiple de 10";
else
return;

IE8 64bit Incapatable with 9.3.3 IR Web client plugin?

Based on problems we are seiing on a few client machines, we strongly suspect that the 64 bit version of IE8 is not compatable with the 9.3.3 IR Web Client Plugin.
Is this a known condition?
Forgive me if this question has already been answered. I am quite new to this forum.
Thanks
Richard

You can check the support matrix in the following link for all Hyperion versions:
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

Portal and IC Web client Transaction Launcher conflict

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

PCUI and CIC web client differece?or same?

crm sale module in pcui and sales module in cic web client are same or different..technical and configuration differences
can anyone help me out in this..
thank you,
hun

Hi raj,
thank you for the information.
is there any relation between pcui and other web based applications like internet sales(b2b,b2c e-sales,e-service,e-marketing,,icss) and cic(for call center users) and sap portal(channel partners/b2b-one of the application).
is there any difference between launching crm_ic directly than from launching it from crm_ic. do i do the setting for cic webclient settings in spro or se80. i think bsp applications for cic webclient are done from se80 and the configuration for cic webclient.please tell me if it is not right.
where we will generate the url for this cic webclient and internet sales so that the users can use that url and login from anywehre in the world through internet browser.
thank you,
hun

IIS and IC Web Client

Hi,
I'm having a problem with my IC Web Client. After I install IIS (because I need to install TREX), I launch IC Web Client, it shows Page cannot be displayed. I uninstall IIS, my IC Web Client works fine. Anything that I've left out?
Appreciate any help.
Hapizorr Rozi Alias

Problem solved.

I updated to 20.0 and now my web client I use to monitor my home security (My-Q see) no longer works. What do I need to do.

My remote monitoring for my security ( My-Q see) worked fine until I updated to 20.0. Now Firefox pops up asking me to install web plug in kit. when I do, it still does not work even after restart.

I have the same problem with Firefox 20.0 and 20.0.1 .
I have tried changing various Firefox settings with no luck.
In Firefox version 19.x I was able to access the Q-See application with its native plug-in which is downloaded from the Q-See DVR, it didn't require any additional plug-in's.
I am providing some additional technical information that may be helpful to a Firefox expert.
Q-See DVR model qt-426
Firefox url to access q-see dvr http://q-see-ip-address/WebClient.html
Q-see Plug-in information:
Plugin name DVR Cleint 1.1.2.9;
Web Camera;
File npwebclient.dll;
Mime Type application/x-dvrwebclient (npwebclient)
Q-See Plugin installer setup.cmd file text listing:
REM ×¢²áacitvex¿Ø¼þ
regsvr32 /S npwebclient.dll
REM Ìí¼Ófirefox plugin ×¢²á±í
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /va /f > nul
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /v "Path" /t reg_sz /d "C:\windows\system32\WebClient\npwebclient.dll" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /v "Version" /t reg_sz /d "1.1.2.9" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /v "ProductName" /t reg_sz /d "EDVR Web Client" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /v "Description" /t reg_sz /d "EDVR Web Client Plugin" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient" /v "Vendor" /t reg_sz /d "" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient\MimeTypes" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@EDVR/WebClient\MimeTypes\application/x-dvrwebclient" /f
REM Ìí¼Ó¿ØÖÆÃæ°åÉ¾³ý³ÌÐò
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WebClient" /v "DisplayName" /t reg_sz /d "WebClient" /f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\WebClient" /v "UninstallString" /t reg_sz /d "c:\windows\system32\WebClient\uninstall.cmd" /f
REM ÐÞ¸Äfirefox²å¼þ³¬Ê±Ê±¼ä300Ãë
REM chdir "C:\"
REM for /f "delims=" %%i in ('dir /a-d /s/b prefs.js') do echo
user_pref("dom.ipc.plugins.timeoutSecs", 300); >> %%~fi
REM chdir "C:\windows\system32\WebClient"
REM É¾³ý×ÔÉí

Error installation oracle Hyperion interactive reporting web client

I can't install the web client through Hyperion workspace v11.
My steps are:
Workspace --> Tool --> Install --> Interactive Reporting Web Client
Then error message is shown: unexpected status 400 (no host matches server name XXXXXX.com) returned on XXXXXX:45000/workspace*/dataaccess/../../InsightInstaller/setup.ini access check
Please check if the server is properly configured.
After I pressed OK, another error message is shown:
unable to launch the installer. Please use the information bar (if available) to install activeX control or check if you have Admin right on this computer.
I am using IIS v5.1.
Can any friends help on this issue?
Is there anything to configure in my IIS? or the version is too old ?
Thank you ~!
Jeff T

The solution to this problem is simple and easy.
Which port are you using to login to workspace for installing the client. I predict its 45000 port.
Try using the 19000 port for logging into the workspace and try installing the IR web client. It works.
Let me know if there are still any issues.

Error when installation of Hyperion 11 interactive reporting web client

I can't install the web client through Hyperion workspace v11.
My steps are:
h3. Workspace --> Tool --> Install --> Interactive Reporting Web Client
Then error message is shown:
unexpected status 400 (no host matches server name XXXXXX.com) returned on XXXXXX:45000/workspace*/dataaccess/../../InsightInstaller/setup.ini access check
Please check if the server is properly configured.
After I pressed OK, another error message is shown:
unable to launch the installer. Please use the information bar (if available) to install activeX control or check if you have Admin right on this computer.
I am using IIS v5.1.
Can any friends help on this issue?
Is there anything to configure in my IIS? or the version is too old ?
Thank you ~!
Jeff T
Edited by: user8102244 on Mar 18, 2009 12:00 AM

Hi,
First try to go the below path and execute setup file
C:\Hyperion\products\Foundation\workspace\AppServer\InstalledApps\workspace_static\zeroadmin\component\Insight
After executing setup file try to install web clientthrough workspace.

Where to get Web-Dynpro plugins for Eclipse?

I've downloaded the trail version of "SAP NetWeaver Development Studio" which contains the Web Dynpro. The NWDS is in the fact Eclipse with Web Dynpro Plugins. But I find the version of the eclipse used in NWDS is quite old.
I want to use the latest version of Eclipse and the Web Dynpro plugins. Who knows where can I get the Web-Dynpro plugins?

Wei, I don't think that it is possible to do what you want to do.
As you've noticed, NDS is built on an old version of Eclipse. It is possible to add some plugins that were written for the old version of Eclipse but you won't be able to use most of the new plugins.
SAP has a new version of Studio coming out soon (in rampup now I believe) that is based on Eclipse 3.*. It is supposed to be easier to use plugins with that version of Studio (at least based on what I've read).
I think this forum is where they discuss that.
Test JCo Destination from WebDynpro Application

Web Client Integration with Address Validation

Hi Friends,
Iam working in CRM 5.0. Please find my requirement below:
When accounts are created with or changed with PCUI and IC Web client: display feedback from Address validation software, using the "out of the box" GUI integration as a model.
1. Display addresses validation warnings/correction feedback, if any. The user will have the option to:
     a. Accept the address validation software correction , or
     b. Bypass the warning and use the original address that they entered, or
     c. Cancel and return to account maintenance
2. Display duplicate candidates and allow the user to switch to a duplicate candidate if desired by clicking
     the candidate (instead of proceeding with account creation)
How can I check whether the Address Validation software is integrated with IC Web Client? If it is not integrated, then is there any configuration to be done to get the popups for address validation and duplicate check?
Your suggestions and Ideas will be rewarded.
Regards,
Raju...

Hi Friends,
Any suggestion on this?
Thanks & Regards,
Raju

Web client and desktop client not available for Interactive reporting 11.1.2.2

Hi team,
Currnetly we are usning EPM 11.1.2.2 , we are trying to install and configure
Interactive reporting in Linux 64 bit system.
we are few questions jotted below:
Interactive reporting studio client & Interactive reporting Dashboard Development Studio client are disabled.
post installation we are not able to see IR Client folder in <EPM HOME> location.
while launching workspace we are not able to see the WEB Client Interactive reporting under TOOLS-->INSTALL.
we read in a blog, which states it Interactive reporting needs a license. whether it needs any special License for using it?
we downloaded the Entire Dump of EPMS 11.1.2.2 from Oracle Edelivery website.
Kindly let us know we are missing any where?
we are strucked at this point.
Regards
Chinu

If you want the 11.1.2.0 assemblies you will need to contact Oracle as they have been removed from edelivery.
Cheers
John
http://john-goodwin.blogspot.com/

Spring Tools Suite and vSphere Web Client plugins

Similar Messages

Maybe you are looking for