SPRO (Customization) settings for PM-PP integration

Hi Everyone,
Though I know one or two customizing settings, I need to know all the SPRO settings for PM-PP integration. please be elaborative in your responses.
Thanks in advance.

Hi
Please find standard scenario for SAP PM_PP integration.
The goal is to see maintenance work orders taking available capacity from
production work centers.
Production work center must be entered into the appropriate equipment master record(s).
The work order the 'system condition' must to set to "0" for PM
reservations.
Production work center is set to include "Proj:RqmtsNetwkMaint" (Standard formula SAP008) in both the Scheduling
view and Capacity view in the 'Other formula' field. The capacity requirements in "Extended" capacity evaluation
(transaction codes CM50 - CM55).
Let me know
Regards

Similar Messages

How do I customize settings for Drafts mailbox on an Exchange account?

My company's IT department set up my work email to sync with my iPhone. It's an Exchange account.
Right now, I can't send or edit emails that I compose and save as a draft on my office computer from my iPhone. I believe that I need to edit the settings for the Drafts folders, but I can't find where these account settings are located - I don't see an Advanced settings option.
Can anyone help? Thanks!

A bit more info on this-- my company allows access from Microsoft Exchange to iPhones via ActiveSync.
I have a problem editing messages created in Outlook (desktop) on the iPhone. The Draft folder and its contents will sync to the iPhone, and I can open and view the messages, but cannot edit and send them.
Is there a way to solve this by configuration? I can't find "Advanced" setting options on my iPhone. Thanks.

Spro Settings for CAD Desktop

Hi Experts,
Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
Thanks a lot in advance....

Hi,
for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Best regards,
Martin

The settings for accounting integration contain errors

The settings for accounting integration contain errors
Message no. DPR_FIN_GECCO004
System Response
The accounting functions are not available.
Procedure
Check the following in Customizing for Collaboration Projects:
Did you assign an object type to the project type for communicating with the accounting system? See the IMG activity Make General Settings.
Does this object type have the proxy class CL_DPR_OLR3_GECCO (for single-object controlling on internal orders) or CL_DPR_OLR3_WBSELEMENT (for single-object controlling on WBS elements)? See the IMG activity Define Object Types for Object Links.
Has an RFC destination been entered in this object type? See the IMG activity Define Object Types for Object Links.
In the project type did you choose the confirmation setting regarding 'Time Recording for' to match the integration scenario? See the IMG activity Define Project Types. For example, time recording for a role is not permitted in a structure-based scenario.
All the steps mentioned in the in the above error have been verfied and are correct but the error is still existing. Is there anything that I am missing here?

Hi SAP USER123 ,
Actually the description of the messages should the reason of the problem. Please double check the settings again one by one.
If the problem still remains, you can open a customer message for help.
Kind regards
Zhenbo

SPRO settings for the Creation of treatment codes.

Hi Experts,
Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
Regards,
harmesh

Hi
What is Treatment Code??
If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
Regards
Amitesh Anand

IMG or SPRO Settings for BI in CRM

Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
Thanks

Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM

CProject - The settings for Accounting integration contain errors

Hi,
I got error message "The settings for Accounting integration contain errors" from cProject page when I choose controlling method (Project Role, Automatic).
If I choose other controlling method then this the error message disappear.
Maybe some thing wrong while setup Role Type?.
Please help!
Thank you
Long Nguyen

Hi,
Are you using MULTILEVEL CONTROLLING ( PROJECT ROLE , AUTOMATIC)
that means
Multilevel Controlling (Project Role, <b>Automatic</b>): In this method, the system automatically creates a PS project definition for the project definition and a WBS billing element at the first level of the hierarchy. More WBS elements are created for the project roles of the cProjects projects.
Multilevel Controlling (Project Role, <b>Manua</b>l): In this method, a user has to create the PS project in the ERP system. The user then has to assign the project roles of a cProjects project to the WBS elements of this PS project manually in cProjects.
thanks
sunil

Edirectory settings for SMG authenticaion

Hi,
We have installed Symantec Messaging Gateway v10. In order to receive Daily Qurantine report of Spam message for users, we must configure AD integration. We want to configure the directory integration with our Novell Groupwise server but somehow it is not working.
We have Novell Netware 6.5 with Groupwise 7 installed. The servers are clustered (2 nodes). We also have single netware server as certificate and backup server.
We have tried many different settings to setup Directory Integration with the Novell Groupwise email server. The LDAP server test login is successfull. While doing the Authentication test login query, it gives us error.
Some errors the we get are as follows (with the required fields are also defined):
ERROR 1 #################################################
"The user name you have provided is shared by multiple directory entries. DDS error code: 800501 Additional information: User name drivesafely is not unique. The following entries share the same user name: [result set too large, server returned no entries]"
The settings when we get above error are as follows:
Base DN: Customize...
Custom base DN: o=company
Query filter: (objectClass=user)
Primary email attribute: emailid
ERROR 2 #################################################
"The LDAP server returned a success status for the authentication query.
Failed to authenticate the user with the test credentials provided.
Incorrect user name or password."
The setting when we get above error are as follows (with the required fields are also defined):
Base DN: Customize...
Custom base DN: o=company
Query filter: (objectClass=uid)
Primary email attribute: emailid
I think the query needs to be refined. Can someone guide on the above issue ?
Thanks and regards,
Kalpesh

On Mon, 15 Apr 2013 18:06:02 +0000, ckalpesh wrote:
> We do not have more than one user with same email address.
Then this message:
The user name you have provided is shared by multiple
directory entries.
makes no sense, because it seems to be telling you that it's finding
multiple objects with the search filter you provided.
You might be able to figure out what this thing is doing from the server
side of things. Find the LDAP Server object for this server and enable
all of the trace options except for "packet dump". Then use (n)dstrace (-
all +time +tags +ldap) to see what this application is doing.
Other than that, you'll have to ask whoever is responsible for this "SMG"
thing what their application is supposed to be doing and how to configure
it properly.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.

What are all the major SPRO parameters available for MRP run in SAP.

Dear Frndz,
What are all the major SPRO parameters available for MRP run in SAP.
Regards,
Srini

Hi,
For MRP, the main Customization settings involved are:
1. Activate MRP and Set Up Planning File - OMDU
2. Define Parallel Processing in MRP - OMIQ
3. Define Scope of Planning for Total Planning - OMIZ
If you want to use MRP Areas and include this in Scope of Planning then.
1. Activate MRP for MRP Areas
2. Define MRP Areas - OMIZ
With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
If you need any any specific information please inform..
Regards,
Siva

Customization step for classic to extended classic

Hi,
Currently I have implemented classic scenario in SRM 7.0 with ECC in back-end. Now I am planing to implement extended classic scenario. In the same time we are planning to continue the classic scenario for some product category. In breif: Purchase order will be either in SRM or ECC base on product category. Please guide me let me the necessary customization setting for implementing the abover scenario.
Thanks
Regards,
Jennifer

HI,
Please activate extended classic in SRM
SPRO: Cross-Application Basic Settings->Activate Extended Classic Scenario
SPRO: Business Add-Ins->Control Extended Classic Scenario (here you can control if you need PO in SRM or ERP)
Number range, tranaction types to be configured according for SRM and ERP
Regards
Sam

Settings for 50% claimable is maintained for Basic, Cess, Edu Cess and Add

Hi,
Can you tell me where the settings for captial goode 50% claimable is maintained for Basic, Cess, Edu Cess and Additional duty.
Regards
VR

Hi Manish
for Capital Goods Procurement,
first the material and chapter id has to be maintain and with that material code it should be decalred for Assets.
Customization in SPRO for maintaine specify Excise accounts per Excise TT as.........
when ever you capture the excise for capital goods the RG23C Register type is updated for Capital Goods showing the 50 % excise can be avail for present financial year and 50 % next financial.
The Excise Posting Entries must be like
                                    Cenvat Account           Dr.       (50%)
                                    Cenvat On-hold           Dr.       (50%)
                                    Cenvat Clearing                      Cr.
You can check the balance avail in T Code J2I8
Pls refer the below link also it may help you much better...........
http://help.sap.com/bp_bblibrary/500/Documentation/J84_BB_ConfigGuide_EN_IN.doc
Regards,
patil

Backend settings for ESS

Hi Experts,
I like to know about the backend settings for ESS.
If possible provide some links about "ESS backend settings".
Regards,
Krishna Balaji T

Hi Krishna,
For ESS in Backend you need to rember two things.
i) Home Page Customization where you need to create Resources, Areas, Subarea, Services, Area Groups and Assign Services to Subarea and Subarea to Area.
ii) For rest of the ESS applications like Time, Leave, Claims, Travel, Training, Reimbursements, Benifits and Payments, Pesronal Info you need to go to SPRO -> Personal management ->ESS -> Self-Service Settings
Regards
Vijay

Particular Settings for Colombia

Hello,
Im doing a rollout in Colombia for my client but im having problems in Colombia settings for invoicing. Could someone help me to clarify where or how i should set the next:
1. I understand that NIT should be informed in KNA1-STCD1 as indicastes in the help but here is not allowed define the "-". for example 830011670-3 in STCD1 must be 8300116703 but in invoices printing should have the "-"
2. Where must be assigned the economic activity - CIIU to each customer?
3. Prenumbering invoices: In Colombia clients must request to DIAN the official numbering which must be displayed in the invoice.   Where i should to parametrize this range to be consumed each time an invoice is created and displayed in the form?
4. How to parametrize witholding tax ReteIVA, ReteICA and Retefuente to be applied in the invoice?
Thaks for your help.
Juliana

hi juliana.
1. STCD1 field filled with the NIT with digit verification.
1A. The printing of the bill must go "-" separating the digit verification is working SD with ABAP and ABAP is simple engineer will have to say how to do it but you would say that the information is in STCD1 KNA1-field and must separate the last digit with "-" in the functional specification.
2. Shovel ISIC code (economic activity), SAP note 2034502 which should be applied and generate corrective was issued.
3. Print the invoice consumption range of the resolution issued by the DIAN, is also subject SD with ABAP, you give the resolution to SD and is responsible for the sales invoice, if you have to check sale from FI, SAP has no standard solution for this case, you must fastidiously to a non standard solution with ABAP.
4. Deberas use in customizing the solution to the extended retention in the system tray of the different options which perfectly cover the location for Colombia.
Previously acticvar retention society enlarged by customizing the following path:
SPRO - NEW FINANCIAL MANAGEMENT - BASIC PARAMETERS OF FINANCIAL MANAGEMENT - WITHHOLDING TAX - TAX WITHHOLDING EXPANDED - COMPANY - EXTENDED ON WITHHOLDING TAX
The configuration is performed in the following path by following step by step
SPRO - NEW FINANCIAL MANAGEMENT - BASIC PARAMETERS OF FINANCIAL MANAGEMENT - WITHHOLDING TAX - TAX WITHHOLDING EXTENDED
The recommendation for the best integration with SD and avoid complex errors at the time of billing is set indicating a type of retention indicators retention several example:
CLASS STATUS              INDICATOR TYPE               SD
A1                                              01                        ZCRE
A1                                              02                         ZCRE
A1                                              03                         ZCRE
A2                                              01                        ZICA
A2                                              02                        ZICA
A2                                           03                         ZICA
as this will facilitate your settings to SD calculation schemes or classes ERP condition and the integration of SD with FI
My skype: camiloantoniochaconramirez
Gladly will any questions you have.

Settings for SMQS

Hi Everybody,
What are the defaut settings for SMQS in R3 as well as BW. In our server the status is Inactive for all processes. And how to change or register?
Thanks,
Kush

Hi Kushal,
SMQS sttings in BW:
In releases up to and including BW Service API 3.0C, data packages are transferred independently of any enhancements to outbound scheduling (QOUT scheduler) that have since been made available. Settings in the corresponding control transaction SMQS were not relevant. However, in some cases, it was necessary to explicitly deregister the BW destination (see SAP Note 673940).
With BI Service API in Release SAP NetWeaver 7.0 (Plug-In-Basis 2005.1), you can (optionally) switch control of the transfer to the standardized outbound scheduling of the queued RFC. The approaches differ as follows:
● Connected BI system has Release <= 3.5
Default remains unchanged. You perform the switch manually using the RSA1_TRFC_OPTION_SET program. (Prerequisite in Basis Release 4.6C is qRFC version 9 supplement 45.)
Alternatively, the BW destination can be deregistered automatically.
● Connected BI system has Release >= SAP NetWeaver 7.0
The default setting is changed; however, you can revert to the original setting using the program mentioned above.
If you are using standardized outbound scheduling, the number of processes used to transfer data packages to the BI system has to be maintained for the BI destination in transaction SMQS.
In this case, the global data transfer settings (see SAP Customizing Implementation Guide (transaction SPRO)--->Integration with Other SAP Components ---> Data Transfer to the SAP Business Information Warehouse ---> General Settings ---> Maintain Control Parameters for Data Transfer) only effect the number of processes that are used to transfer the data packages from the extraction process to the tRFC for the transfer.
For regestering Go through...
[http://help.sap.com/saphelp_nw70/helpdata/EN/af/d4fa40ee14f26fe10000000a1550b0/frameset.htm]
When Your destination is registered and the queue status changes from INACTIVE to ACTIVE, if the queues contain LUWs that can be processed for this destination. WAITING and WAITCONN appear if the maximum number of connections has been reached or if the scheduler is waiting for a connection to become available again. As soon as a connection becomes available, the status changes to ACTIVE and the queue is processed.
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:27 AM
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:28 AM

Settings for outgoing Email

Hi
i am working in crm2007 version and trying to send an outgoing email from UI and once i send the mail and look back into my outlook sent items found no update here...and when i try to send mail from CRM system to my outlook id but not recieved any mail in to my outlook....but outgoing email Activity is created in CRM system...
could any one let me knoe what settings do i still maitain to have the above send functionality in total....
Thanks
Phani

Phani,
there is a small customizing that needs to be set.
link under spro --> CRM -> Basic functions -> One-to-One E-Mail -> define multipart email ....
these properties can be set.
Address Search in Groupware --> where should the app serach for email addresses not identified as CRM contacts
Groupware for E-Mail Integration -> define mail client for inbound email
Groupware/E-Mail Copies -> define mail client to put the copy in the sent items
Supported E-Mail Formats -> mail format
Additionally transaction type for inbound mail is 0004, outbound 0005
pls create a blank outbound mail (no reply) from CRM and check if this reaches the recipients and is getting put in the sent folder after checking those settings.
is case on that does not help pls create an OSS and send it to me.
cheers
martin

SPRO (Customization) settings for PM-PP integration

Similar Messages

Maybe you are looking for