SQL Developer and 3rd Party Drivers: JavaDB

Go the latest 3rd party drivers for MySQL and <ugh>MS Access</ugh> but what I am looking for is a third party driver for Apache_derby JAVADB. Anyone?
Manually adding the derby.jar in the thirdparty drivers under Preferences appears to do nothing in the SQL Developer GUI.

Currently, only the named third party database (MS SQL Server, Sybase, MYSQL and Access) are supported. Generic third party connection isn''t available until 2.0
You could try defining a custom JDBC URL, but i suspect there ins't enough underlying support to make it worthwhile.

Similar Messages

Install 3rd party drivers when installing app

Running LabVIEW 2010. I have an application that runs with custom hardware plugged into the USB port. The device is not an NI device, and therefore, does not use NI drivers. I have 3rd party drivers for the device, and rather than install them separately, I would like the option of installing them when the user installs the application software. Is this possible?
Thanks.

On the Advanced page there is an option to specify an executable to run after your installer has completed.
Please review the LabVIEW documentation for this page of the installer

3rd Party Drivers - Program installation stalled

I'm trying to install an embroidery program (Bernina) in XP on a macbook pro with boot camp, but somewhere down the process the installation always hangs with a small box generated by installer that says 'Installing 3rd Party drivers'. After this the install program is using 0% CPU indefinitely and only 'End Task' will shut it down. Using Boot Camp 2.1.
The program successfully installed on on Dell laptop, and for a while I thought the problem was SP3 being installed with XP. Uninstalling SP3 resulted in no change in install outcome, and did cause some other broken programs.
The program has a USB security key for authentication, but we can't even get that far.
Any & all suggestions would be welcome. Thanks
David

Closed due to no answer after 2 years.

Installing 3rd Party Drivers

Is it possible to install 3rd party drivers during a Safe Boot?
If so, is it better?
I'm having trouble with drivers loading sometimes, and other times not ... seems to be having problems "around" "Login Window".
I use auto Login on Startup and Restarts.
Wondering if this could be a "when and where of installation" issue.
Guessing ... apologies for being vague ... particulars can be found on M-Audio's site Forum (if you're really interested):
http://forums.m-audio.com/showthread.php?t=3856
Stumped again ... this is a new replacement PCI audio card.

I got a Rev B Replacement card from M-Audio. It behaved the same way as before under 10.5.6, until I ran AppleJack.
I believe that cleared up the problems: M-Audio's v2.0.8 drivers don't install properly under 10.5.6... As I understand things, Ownership and Permissions need to be changed, and caches needed to be rebuilt. AppleJack under auto pilot did this relatively fast ... compared to how long its taken to arrive at a solution ...
Read more on my woes and Solution (page 5) at:
http://forums.m-audio.com/showthread.php?t=3856&page=5
Also replaced the PRAM battery.
Up and running fine to date with the Sonnet Tango USB/FW and Rosewill NIC PCI cards alongside.
Perhaps AppleJack could solve other 3rd parties driver's installation woes?

View jobs with SQL Developer and export to file with delimiter

Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.

Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file.

SQL Developer and Blocking View of Other Users' Objects

I am using SQL Developer in a classroom environment. My student users can “see” Other Users objects. They cannot modify, but none the less can see the structure and data.
I only want the users to be able to see their own objects. Is there a privilege that needs to be revoked? (In using SQL Plus command line, this was not a problem.)
Thanks.
-Karen

Karen,
From sysdba account (sys/system). Run following and verify for that particular user grant is revoked. May be exit from sql developer and log back in or refresh view.
YOu can also potenially revoke all the privs from all non admin uses i.e.r even connect/resource roles and grant them back.
revoke select any table from yourschemaname;
revoke connect from schemaname;
revoke create session from schemaname;
revoke resource from schemaname;
Then just grant privs as need basis
grant connect to schemanme;
grant resource to schemaname;
grant create session to schemaname;
..Regards
Edited by: OrionNet on Jan 23, 2009 2:01 PM

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

Lost all my actions and 3rd party filters after upgrading to Photoshop CC 2014

How do I get all of my actions and 3rd party filters from Photoshop CC to Photoshop CC 2014?

If you migrate your CC presets you should get your Actions, Pattens, Sahapes, Shapes etc back. Menu Edit>Presets>Migrare Presets. You need to copy or to install you 3rd Party plug-ins into CC 2014.

Links for SQL Developer and Data Modeler not working?

Hi folks,
I tried to access the new SQL Developer and Data Modeler links posted in the April 1 message (and on the Oracle site) from a couple of machines with no luck (empty zip files) - is there an update to the links?
Thanks!
Tomo

In Firefox zero length zip. In IE loses connection to downloads.oracle.com.

Install Oracle XE, SQL Developer, and Toad on the same machine?

I have been trying to install Oracle SQL Developer, Toad, and Oracle Express on my work computer. Installing SQL Developer and Toad was pretty straightforward, and I was able to browse the XE database with SQL Developer. But after installing Toad, problems started. Toad was using Oracle XE's registry settings to locate ORACLE_HOME and oci.dll. So I tried changing the settings for Oracle XE in the registry. Toad now works, but not Oracle XE. And while I was going through this all, I even had a time when I had Toad and oracle xe working, but not SQL Developer. It almost looks like you can choose two of the products, but not all three.
So, my question to the community at large is "Can it be done?". In what directories do you have each product installed? What environment variables do you have set? Where is your tnsnames.ora? What Oracle registry settings do you have set (namely HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE)?
I can post my current settings, but I've been through so many iterations that these current settings don't really matter that much.
Here are the details I am looking for
Path to sqldeveloper.exe
Path to oracle.exe (for Oracle XE)
Environment Variables
ORACLE_HOME
ORACLE_BASE
TNS_ADMIN
PATH (just the oracle stuff)
Registry Settings
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_HOME
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_BASE
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\TNS_ADMIN
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\OLEDB
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORAMTS_CP_TRACE_DIR

I don't use toad, but there should be no reason why you can't install all 3. SQL Developer is a very clean install and affects nothing else. It doesn't add to the path, or create any registry entries except for file associations.
A toad installation should pick up your oracle client (in this case the XE code). I am curious as to why you felt you had to change registry settings. What problem were you trying to fix?
My recommendation would be to uninstall everything, clean the registry and reinstall in the order XE, Toad, SQL Developer. Test in between installations and seek help for problems as you find them. Bear in mind that this is the forum for SQL Developer. QUestions about Oracle XE would be better answered in the dedicated forum, or in the Installation forum, and questions about Toad in a toad forum.

Sql Developer and Data Guard enabled instance

I have version 1.1.2.25 SQL Developer and when I try to connect to Oracle 10gR2 instance which is data guard enabled and its logical standby it spits few message, and then connects, but data is not visible from any table.
Is there any way to see data and other code while in logical standby instance which only in read only mode?
Thanks.

This problem came when I tried to connect to Oracle
instance which is a logical standby in data guard
setup. Eventually connection is made and then you can
not see any object.
In logical standby database its suppose to be read
only and should be available for query.
In TOAD you can see every thing and when you want to
make any change ,it spits an error and wouldn't allow
you to make any change.
My question was, why SQL Developer is not showing the
objects in the list and its contains.Perhaps we could help you if you told us what the error was.

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

IOS 8.1.2 and 3rd party keyboard issues still happening

We've had at least three updates to iOS 8 and 3rd party keyboards are still broken. The keyboard reverts back to the standard version randomly, it reverts back when texting from the lock screen, sometimes it freezes completely. I've tried three different keyboards and it happens on all of them. How is this still going on???

This is beyond annoying at this point. One of the reasons I went with the iPhone was their supposed commitment to third party keyboards. I loathe the stock one. It's awful. You missed the spotlight bug. I can never remember where my apps are in folders, and it's difficult to use spotlight without a keyboard!
Fix this Apple, or offer some sort of compensation. Android keyboards work just fine.

Will all (both Apple proprietary and 3rd party) accesories compatible with iPad2 also be compatible with the new iPad (version 3)?

I have just pre-ordered my first iPad, and luckily my timing was perfect as I have been able to grab a first round new iPad (version 3). That said, while I wait for it to ship (due 3rd of April), I wanted to do some research and begin to buy the accesories I will want to go along with it.
Are all accessories currently available on the market and thus compatible with the iPad 2 also going to be compatible with the new iPad (version 3)? This question goes for both Apple proprietary accessories (i.e. Airport Express, Camera connector kit, Smart Cover, etc.) and 3rd party (non-Apple iPad covers / stands, etc.)?
Many thanks in adavnce.

There are two different Zagg keyboards. One of them, the Zagg Folio, is a combination keyboard and case that completely surrounds the iPad, front and back. The Zagg Folio (for iPad 2) doesn't fit the new iPad since the new iPad is thicker.
The other Zagg keyboard is the "Logitech Keyboard Case by Zagg". This keyboard grips and surrounds the front of the iPad, but doesn't go around the back. Since the new iPad has the same frontal dimensions, it's compatible with iPad 2 versions of this keyboard.

Upgrade to Windows 8.1 Pro Update 1 and it killed all my 3rd party drivers

Hoping someone can help - my PC upgraded Windows 8.1 Pro (fresh install a few months ago) with the 'Update 1 patch' which was made available a few days ago. It was done via Windows Update - I let it do its thing for about 15 minutes, restart etc.
Once the machine restarted, I noticed the following:
- no network connection
- no sound
- no working camera
I went to the device manager and see a stack of 3rd-party devices with exclamation marks, all stating code 28 (the drivers for this device are not installed). I go to each device and try to update the drivers - it looks like its going to work and then
gives the error "The system cannot find the file specified".
I do some googling and find the setupapi.dev.log. The log for every device with a problem reads like this:
>>> [Device Install (DiShowUpdateDevice) - HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001]
>>> Section start 2014/04/12 01:23:46.588
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 01:23:46.608
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:46.647
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 01:23:46.686
ndv: {Update Driver Software Wizard for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
!!! ndv: Driver package import failed for device.
!!! ndv: Error 2: The system cannot find the file specified.
ndv: Installing NULL driver.
dvi: {Plug and Play Service: Device Install for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
! ndv: Installing NULL driver!
dvi: {DIF_ALLOW_INSTALL} 01:23:48.883
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.883
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 01:23:48.884
dvi: {DIF_REGISTER_COINSTALLERS} 01:23:48.884
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:48.885
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 01:23:48.885
dvi: {DIF_INSTALLDEVICE} 01:23:48.885
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.886
! dvi: Installing NULL driver!
dvi: Install Null Driver: Removing device sub-tree. 01:23:48.887
dvi: Install Null Driver: Removing device sub-tree completed. 01:23:48.890
dvi: Install Null Driver: Restarting device. 01:23:48.892
dvi: Install Null Driver: Restarting device completed. 01:23:48.892
dvi: Install Device: Starting device. 01:23:48.892
dvi: Install Device: Starting device completed. 01:23:48.893
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 01:23:48.894
ump: {Plug and Play Service: Device Install exit(00000000)}
ndv: {Update Driver Software Wizard exit(00000002)}
<<< Section end 2014/04/12 01:23:50.286
<<< [Exit status: FAILURE(0x00000002)]
It seems like 'update 1' as crapped all over my driver store.
What can I do to fix this - I have tried a raft of things such as pnputil commands to add the driver INFs manually (they fail saying 'element not found'), but still I am stuck without sound, network and camera.
This will be the last time I let Microsoft update automatically install - it will now be 100% manual, and done after a few weeks to ensure there aren't bugs.

espero y te sirva este link :)
http://blogs.itpro.es/octaviordz/2014/04/05/actualizar-de-windows-8-1-2012r2-a-windows-8-1-ws2012r2-update-con-script-de-powershell/
Freelance-IT http://www.freelance-it.com.mx

SQL Developer and 3rd Party Drivers: JavaDB

Similar Messages

Maybe you are looking for