SQL Permissions for the SQL Managment Pack

Hi,
Were implementing version 6.5.1.0 of the SQL 2005 2008 2012 Managment pack. Its going ok, but there is a line...
Add “SQLDefaultAction” to the dbmodule_users database role.
that makes no sense. I can't see dbmodule_users as a database role. Am i being thick?
Chris
Chris Gibson

Hi Chris,
Did you follow the SQL management pack guide downloaded here:
http://www.microsoft.com/en-us/download/details.aspx?id=10631
To configure runas account for SQL monitor, you may check the article below:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

SQL Management Pack Agent Job Unit Monitors

I am trying to utilize the SQL Agent Job Monitors included with the SQL Management Pack (page 81 of the MP guide), particularly the "Last Run Status" monitor. I have set an Override for "Generate Alerts" to True. The goal
is to have an email notification sent when any SQL Agent job fails on a specific group of computers. However, I am not familiar enough with what "Last Run Status" is actually monitoring and if it will do what I am looking for. Does this monitor
check the job status of any agent job on the target group? I tried setting up a job for it to fail, which it does fail, but it does not generate an alert. Any suggestions appreciated. Thanks.

1) For monitoring SQL server job status, you can refer to the following blog
http://blogs.technet.com/b/kevinholman/archive/2011/08/05/how-to-monitor-sql-agent-jobs-using-the-sql-management-pack-and-opsmgr.aspx
2) For troubleshoot: Make sure that your SQL agent job is discovered, you may find the discovered job under Microsoft SQL Server --> SQL Agent --> SQL agent job status. By default, the discovery is disabled and you should enabled the discovery by using
override.
Roger
Thanks. So I enabled Agent Job discovery for the systems that I want. It discovered those objects. Now, I still cannot get the alerting to work. I can see the Health State of the job change to a Warning, indicating "Last Run Status" equals Failed, but
it is not generating an alert. I set Overrides (Generates Alert = True) on a Group that included one of the job objects, nothing. I also set the same Override directly on the job object and I still do not receive an alert. Any ideas? I
noticed someone in the comments mentioned in the blog you linked, a similar issue, except with the Job Duration monitor. However, he was able to get alerts to generate by setting the Override directly on the Job object and noted that it is not a
feasible solution due to the number of jobs he wants to monitor. Again, I tried the same, but still could not get alerts. That solution would not be acceptable for me either because of the number of jobs that I would have to set individual Overrides for.

SQL Management Pack - login to databases required?

I've recently imported the SQL Management Packs (version 6.5.4.0) and discovery has been working fine - Databases are being discovered and displayed in the Databases view in the SCOM console. On one of the 2012R2 SQL servers, I noticed these errors in the
OpsMgr Event Log (see below)
The information that the MP needs for the Database properties (DB Free space, source log shipping, etc.) seems like it could be achieved without having to login to each individual database. Is there a reason why the SQL MP requires this type of intrusive
mechanism for querying information? Is there a way to disable these login scripts but still obtain the information about databases?

You can find the content of the monitoring script here
http://systemcentercore.com/?GetElement=Microsoft.SQLServer.2012.DBSizeRawPerfProvider&Type=DataSourceModuleType&ManagementPack=Microsoft.SQLServer.2012.Monitoring&Version=6.5.1.0
I don't have toroughly reviewed it, but if you do you'll probably find
how it works and why it needs to log into every database.
Now, if you do believe that you can obtain the same informations using WMI and without logging into the DBs, you'll have to disable every monitor that tries to connect into them and write your own ones...

SQL Management Pack - Page Life Expectancy Alert

We have SCOM 2012 SP1 and SQL Management Pack 6.4.1.0 in our environment. It seems that the majority of our SQL servers are reporting the Engine Page Life Expectancy error. However when I look at the performance data, the alerts are triggering
at random times even when according to the performance data, it is not even close to the threshold. Even on the alert context, the value well above the threshold in most cases.
When I look at the monitor in the Authoring pane, the configuration states the threshold and the interval but it does not state what counter it is looking at. Not sure if that is normal.
I was wondering if anyone else is experiencing this issue. I am about to disable the monitor since I am not getting consistant alerts
Thanks!

Please also change the critical alert to a warning through creation of an override for all of these objects.
SQL SERVER – What is Page Life Expectancy (PLE) Counter
http://blog.sqlauthority.com/2010/12/13/sql-server-what-is-page-life-expectancy-ple-counter/
Niki Han
TechNet Community Support

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name:      Application
Source:        Application Error
Date:          27.08.2014 11:47:54
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471545</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>1.0.20922.0</Data>
    <Data>505e1b30</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.2.9200.16864</Data>
    <Data>531d34d8</Data>
    <Data>e0434352</Data>
    <Data>0000000000047b8c</Data>
    <Data>23a0</Data>
    <Data>01cfc1dbe703a8ac</Data>
    <Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        .NET Runtime
Date:          27.08.2014 11:47:54
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471544</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>

Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support

The selected management pack cannot be deleted.

I'm having problems deleting a custom management pack in SCOM 2012. The error is the following:
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
Any ideas?

I face the same problem in SCOM 2012 SP1
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
I only have the problem with one unsealed MP.
I can delete other sealed MPs and import them again. So I hope my environment with DB is working well.
I also have deleted all overrides for this pack (in the same MP/xml because it is unsealed), restarted the DB-Server and the SCOM Management Server and also started the SCOM console with switch "/clearcache". All without success
Any idea how I can remove this MP from my SCOM environment.
Remark:
I tried the idea from AndreasZuckerhut
http://social.technet.microsoft.com/Forums/systemcenter/en-US/166c3560-c3ae-4510-8e25-1b6f1b57e3bc/unable-to-delete-mp-in-scom-2012?forum=operationsmanagermgmtpacks
created an own MP with the same ID but a newer version and started the "Import Management Pack" from the SCOM -Management GUI.
This time I got the Import-error called "The transaction log for database 'OperationsManager' is full due to 'ACTIVE_TRANSACTION'. I also see the same eventlog entry 9002 on the SQL-Server System. Could this be also an hint to
the upper problem of an failed deletion of an MP? A guide how to solve this is on
http://www.codeproject.com/Articles/380879/About-transaction-log-and-its-truncation-in-SQL-Se . But I not tried it yet whether it solves the problem. I will ask an SQL expert first and will note the result here later.

Definition for the "Data Manager"

Hi all!!!
Can anyone give me a definition for the DATA MANAGER?
I have a presentation about performance issues in a week and it would be nice to have an offical definition for it.
Thanks a lot.

Part of the analytic engine that controls read access to all InfoProviders.
InfoProviders are accessed either using an SQL access to the database of the BI system or by accessing alternative sources, such as the database of another operative system, using RFC or HTTP, for example.
Change operations are also provided for InfoProviders that are stored persistently in the database of the BI system, for example, writing in or deleting data from InfoCubes and DataStore objects. These functions are part of warehouse management.

Appropriate permissions for the custom list

Hi,
Recently
I have taken up SharePoint 2013 exam and I got bit confused for one of the question i.e.
Case Study: Consolidated Messenger
You are the lead architect developer and web administrator of SharePoint 2013 for your company.
Consolidated Messenger is a national company with hundreds of franchises
Consolidated Messenger sells franchises to franchisees. Franchisees have three user types
User and its Role
Franchise Manager- Response for managing the franchise
Franchise Employee- Responsible for managing accounts and setting pick-up and drop-off locations for couriers
Courier- Responsible for picking up and dropping off packages
You need to set appropriate permissions for the franchise employees
customer list and customer sub site access. What should you do?
A) Add franchise employees to the Members group in the CorporateSiteCollection site collection.
Break inheritance at the
franchisee sub site level.
Create a custom role definition at the
franchisee sub site level.
Add franchise employees to the custom role.
B)
Create a custom role definition in the CorporateSiteCollection site collection with the limited access to the customers list.
Add franchise employees to the custom role at the CorporateSiteCollection site collection
Break inheritance at the
sub site level.
Add franchise owners to the Owners group
at the
sub site level.
C)
Create a custom role definition in the CorporateSiteCollection site collection with the limited access to the customers list.
Add franchise employees to the custom role.
Add full inheritance of the role definition and permissions at the site level
D) Add franchise employees to the Visitors group in the CorporateSiteCollection site collection.
Break inheritance at the
franchisee sub site level.
Create a custom role definition at the
sub site level with Full Control permissions.
Add franchise employees to the custom role.
I feel that both options B and C are applicable but I couldn’t come to conclusion.
Please
share your opinion the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

@Naga, As per non disclosure agreement that you have signed / agreed with Microsoft, I think you should not share confidential exam questions or answers. That would amount to violation of NDA.
Hope this helps!
MCITP: SharePoint 2010 Administrator
MCTS - MOSS 2007 Configuring, .NET 2.0
| SharePoint Architect | Evangelist |
http://www.sharepointdeveloper.in/
http://ramakrishnaraja.blogspot.com/

Documentation and Installer for "Oracle VM Management Pack" for EMGC?

Hi,
Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.
Thanks in advance,
Ranganath

>
Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.Hi Ranganath,
This feature is present in EM Grid Control 10.2.0.5 and you need to enable it..
Please refer to
How to Enable Oracle VM Management Pack in EM Grid Control 10.2.0.5 [ID 781879.1]
http://www.oracle.com/us/corporate/press/017955_EN
Regards
Rajesh

How can I create a new E-mail address for the Marketing Manager

Hullo,
how can I create a new E-mail address for the Marketing Manager (i.e. marketing professional role in SAP CRM) please.
That when you go and create a new E-mail campaign you need to choose an E-mail form in addition to the E-mail address of the Marketing Manager.
Kind Regards.

Hi Alhussien
Add it to his Position in the Organisational Model. Transaction PPOMA_CRM.
Under there address section is an option to populate the email address.
Regards
Arden

Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number... H

Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number... HELP Anyone else experienced this?

If there is an option to "license this software", and it takes you to a sign-in page with username and password (not a serial number) - then just go ahead and sign in.
If it insists on a serial number you need to uninstall the trial. Then try to download again.

Can I set public permissions for the Training Catalog?

We want to have all users be able to get into the Training Catalog and self enroll. We have over 7,000 employees with no distribution list for all people. How do I set permissions for all employees to see the training catalog and self enroll?

Ah, support strikes again. The Training catalog is not, and cannot be set to publicly viewable. This permission setting is only available to objects in the Content Library.
If you go to the Training Tab and then Training Catalog you will see an option to Set Permissions for the Training Catalog. Select that and you will be able to add any individual or group from the list on the left to the list on the right to give them view permissions. There will be no "Make Publicly Viewable" option.
If an individual is not listed in the right hand list (or a member of a group on the right hand list), then they will get the Not Authorized message.

Partner function relevant for the credit management.

Hi,
Which partner function is relevant for the credit management.
Regards
Prabudh

Hi Prabudh,
Check this link.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0fde72f-8216-2a10-6e87-e69ab79cb24f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
Much Regards,
Amuktha.

What are the correct permissions for the Home folder?

Since buying my first mac (G4 iMac) I've since bought 2 other macs & transferred my home folder from the older computer each time. Since then I've messed around with the permissions of the Home folder a few times to try share files & folders between my Windows PCs. So the permissions of the Home folder on all computers could be messed up a little.
I want to set up permissions how they should be set up as default.
I created another user account with admin priveliges & it looks like the Home folder should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: Read only
Others: Read only
And the sub folders (Documents, Pictures etc.) should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: No access
Others: No accesss
Is this correct, & if so shall I just set permissions on my Home folder exactly the same as the new account I set up?
Or is there some way of resetting permissions for the Home folder?
(I know repairing permissions with Disk Utility doesn't do this).
Power Mac G5 Dual 2.3, 2.5 GB RAM, 20 Cinema Display | MacBook Pro 2.0 15" Mac OS X (10.4.6)

Mac OS X does not have a built-in way of doing this, but you can make one yourself. Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
do shell script "chmod 755 ~"
try
do shell script "chmod 700 ~/Desktop"
end try
try
do shell script "chmod 700 ~/Documents"
end try
try
do shell script "chmod 700 ~/Library"
end try
try
do shell script "chmod 700 ~/Music"
end try
try
do shell script "chmod 700 ~/Pictures"
end try
try
do shell script "chmod 755 ~/Public"
end try
try
do shell script "chmod 755 ~/Sites"
end try
This script can be saved as an application, which makes it possible to fix the permissions on a home folder with two clicks. The try statements are included so that the script will run if a folder doesn't exist. If the ~ object is a symbolic link, the permissions on it may not be changed; you can use the code block
tell application "Finder"
set the_home to POSIX path of (home as alias)
end tell
do shell script ("chmod 755 " & the_home)
in this case. The rest of the script works as before.
(12450)

Req:SAP Best practice for the Funds Management

Dear all,
Let me know where I can get the SAP Best practice for the Funds Management . Waiting for your valuable reply.
Regards
Manohar

Hello Manohar,
You can find documentation in links below:
Industry Solution Master Guide - SAP for Public Sector:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000065911
SAP Best Practices for Public Sector:
http://help.sap.com/ SAP Best Practices -> Industry Packages -> Public
Sector
Online Library for Funds Management:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/c62c6d6d84104ab938a
a7eae51db06/frameset.htm
I hope it helps
Best Regards,
Vanessa Barth.

SQL Permissions for the SQL Managment Pack

Similar Messages

Maybe you are looking for