SQL Report Builder
I have an application that uses SQL Report Builder to edit templates. When I go to add a dataset to add a custom field to the report, I get a permissions error (screenshot Error). When I check the credentials for the shared datasource, they are
all grayed out, so I can’t verify the credentials being used (screenshot Error 2). According to SQL Management Studio, the user credentials have the right permissions. The weird thing is, I can access the datasets and shared datasource embedded
in the report just fine. I just get a permissions error whenever trying to create a new dataset.
Please provide specifics on the differences (an example please). Things like formatting of dates are very likely to show differently.
Thanks,
Similar Messages
-
SQL Report Builder 3.0 Automatic Scheduling feature ?
Hello All,
We have installed and commissioned a HMI SCADA solution for Shell Petroleum South Africa, We are using Copa Data Zenon for our HMI solution, Zenon's historian are writing variable values into a SQL database from where we are reading these variables with
I-net Clear Reports.
However, I net Clear Reports uses a "PLUS" license which is used for the scheduling function. The license is priced based on the amount of CPU Cores the server has and ours has 16 cores so the license is extremely expensive.
What we need :
To create a report with values from a SQL Database.
Report must be able to be scheduled, to run at specific time.
I have done some testing and used the same SQL queries we used in I-net clear reports.
SQL Report Builder 3.0 does get the variable values when you hit "run" , but it does not look like there is an automatic report scheduling function ? We want to execute a daily , weekly & monthly report.
Does a Scheduling feature exist ?? Please advise
I would highly appreciate your assistance.
Regards.
Paul
Automation EngineerHello,
Report Builder 3.0 is just a report authoring tool.You can design and preview the report with Report Builder,or you can publish your report to a report server or a report server in SharePoint integrated mode, where others can run it. There is no schedule
running function in Report Builder which can processing the report automatically.
SQL Server Reporting Services Standard edition or high edition support email and file share subscriptions and scheduling. You can create subscriptions that can automatic running the report based on a schedule(daily , weekly or monthly ) and send reports
to a shared folder or to an e-mail address.
Reference:Subscriptions and Delivery (Reporting Services)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hi
I've just started using SQL Report Builder to try and design some reports for work but have come across an issue, basically the report focuses on 2014 by displaying sales items by debtor,
qty and value, however when another year is added and the report re-run the report does not include all of the debtors sold to in both years, only the debtors sold to in 2014.
We use SQL Server 2008
Thanks in advance for your helpHi Paullo15,
According to your description, you can't get all expected records after your add a year in your report. Right?
In this scenario, we want to know how you add this year in your report. We suggest you re-execute your query in SSMS and Query Designer to see if they can return same proper records. Also we need to know how you design the report. We suggest you use table/matrix
to render the data.
Please share some screenshots about the report design, report preview and quert result if possible. Thank you.
Best Regards,
Simon Hou -
SCSM 2012 - Reporting on Service Level Breached Incidents in SQL Report Builder
Is anyone clever enough to provide the SQL code required for me to run a report showing the id, title, target end date, and support group for any active incident that has breached its SLA?
I want to run this report automatically each morning and email it but just can't work out the SQL codeThis is an example of a SLO report that I came up with. I am sure you can adapt it for your use. It get SLO information on Service Requests. It's a daily report that brings back both worker and support group information.
BEGIN
DECLARE @Now AS SMALLDATETIME;
DECLARE @TBL_ServiceRequests AS TABLE (
SLOtarget SMALLDATETIME,
SLOwarning SMALLDATETIME,
AssignedTo NVARCHAR(50),
SupportGroup NVARCHAR(50));
BEGIN
INSERT INTO @TBL_ServiceRequests
SELECT
SLO.TargetEndDate_4F17E5C2_86D5_05E8_35DE_6E012567DAB7,
SLO.TargetWarningDate_B98D2C5F_CBA2_8DB9_CA33_E0F808A9801E,
UD.DisplayName,
SR_Group.ServiceRequestSupportGroupValue
FROM DBO.ServiceRequestDim AS SR
INNER JOIN DBO.ServiceRequestSupportGroup AS SR_Group
ON SR.SupportGroup_ServiceRequestSupportGroupId = SR_Group.ServiceRequestSupportGroupId
LEFT OUTER JOIN {'CMDB'}.ServiceManager.dbo.MT_System$WorkItem$ServiceRequest AS PrimarySR
ON SR.BaseManagedEntityId = PrimarySR.BaseManagedEntityID
LEFT OUTER JOIN {'CMDB'}.ServiceManager.dbo.Relationship as Relationship
ON PrimarySR.BaseManagedEntityID = Relationship.SourceEntityID
LEFT OUTER JOIN {'CMDB'}.ServiceManager.dbo.RelationshipType as RelationshipType
ON Relationship.RelationshipTypeID = RelationshipType.RelationshipTypeID
LEFT OUTER JOIN {'CMDB'}.ServiceManager.dbo.MT_System$SLA$Instance$TimeInformation as SLO
ON SLO.BaseManagedEntityID = Relationship.TargetEntityID
LEFT OUTER JOIN DBO.WorkItemDim AS WR
ON SR.BaseManagedEntityId = WR.BaseManagedEntityId
LEFT OUTER JOIN DBO.WorkItemAssignedToUserFactvw AS ASTO
ON WR.WorkItemDimKey = ASTO.WorkItemDimKey
LEFT OUTER JOIN DBO.UserDim AS UD
ON ASTO.WorkItemAssignedToUser_UserDimKey = UD.UserDimKey
WHERE
SR.SupportGroup_ServiceRequestSupportGroupId IN ({'Your Support Group Ids'})
AND
SR.Status_ServiceRequestStatusId IN (7,8,9)
AND
SR.IsDeleted = 0
AND
RelationshipType.RelationshipTypeName = 'System.WorkItemHasSLAInstanceInformation' ;
END
BEGIN
SELECT @Now = CAST(CURRENT_TIMESTAMP AS SMALLDATETIME);
SELECT
[@TBL_ServiceRequests].AssignedTo as [Assigned To],
COUNT(*) AS [Open],
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] > @Now THEN 1 ELSE 0
END
) AS [On Time],
SUM(
CASE
WHEN @Now BETWEEN [@TBL_ServiceRequests].[SLOwarning] AND [@TBL_ServiceRequests].[SLOtarget] THEN 1 ELSE 0
END
) AS [Near Overdue],
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] < @Now THEN 1 ELSE 0
END
) AS [Overdue]
FROM @TBL_ServiceRequests
WHERE [@TBL_ServiceRequests].[AssignedTo] IS NOT NULL
GROUP BY [AssignedTo]
UNION ALL
SELECT
[@TBL_ServiceRequests].[SupportGroup] + ' Assigned',
COUNT(*),
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] > @Now THEN 1 ELSE 0
END
) AS [On Time],
SUM(
CASE
WHEN @Now BETWEEN [@TBL_ServiceRequests].[SLOwarning] AND [@TBL_ServiceRequests].[SLOtarget] THEN 1 ELSE 0
END
) AS [Near Overdue],
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] < @Now THEN 1 ELSE 0
END
) AS [Overdue]
FROM @TBL_ServiceRequests
WHERE [@TBL_ServiceRequests].[AssignedTo] IS NOT NULL
GROUP BY [@TBL_ServiceRequests].SupportGroup
UNION ALL
SELECT
[@TBL_ServiceRequests].[SupportGroup] + ' Unassigned',
COUNT(*),
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] > @Now THEN 1 ELSE 0
END
) AS [On Time],
SUM(
CASE
WHEN @Now BETWEEN [@TBL_ServiceRequests].[SLOwarning] AND [@TBL_ServiceRequests].[SLOtarget] THEN 1 ELSE 0
END
) AS [Near Overdue],
SUM(
CASE
WHEN [@TBL_ServiceRequests].[SLOtarget] < @Now THEN 1 ELSE 0
END
) AS [Overdue]
FROM @TBL_ServiceRequests
WHERE [@TBL_ServiceRequests].[AssignedTo] IS NULL
GROUP BY [@TBL_ServiceRequests].SupportGroup
END
END -
I have a status of completed and a date field in the dataset. The date field is either empty or contains a date. All 2015 dates are holding dates.
So how can I limit the report to only pull completed status with an empty date or a holding date?
I have not been able to set an OR option on a date field filter and if I add two filters on the date column one for empty one for > 12/31/2014 then it treats it as an "and" and pulls nothing from the list I have in sharepoint.
any help will be appreciated.Hi MB,
In Reporting Services, the relationship of filters is “And”, and there is no option to change the relationship from “And” to “Or”. While we can use “or” operator within the expression to create one filter to integrated all filters to work around this
issue.
We can add a filter as follows in the dataset to limit the rows in your report:
Expression: =Fields!date.Value is nothing or Fields!date.Value>"12/31/2014" Type: Boolean
Operator: =
Value: true
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
SQL Server Report Builder Hyperlink Column Not Click-able?
I have a report with a hyperlink column that works in SQL Report Builder 3.0 desktop, but not on the website where it's shown.
1. 'Website_Domain' field is the shortened URL (domain) is the
text seen in the Report column
(technet.microsoft.com)
2. 'Website_Url' field is the full length URL which is used in the
'Go to URL' properties
(http://technet.microsoft.com/en-us/library/ms159106.aspx)
['Website Link' Expression]
=Fields!Website_Domain.Value
['Website Link' Column Properties]
Action = Go to URL
Selected URL: [Website_Url]Hi pointeman,
I have tried your scenario on my test environment, but the issue was not reproduced. Please take the following steps as a reference:
Insert Website_Domain field in the detail row, then type the table header with “Website Link”.
Right-click the cell which contains [Website_Domain] to open Text Box Properties dialog box.
Click “Action” in the left pane, select “Go to URL” option with [Website_Url] as “Select URL”.
The following screenshot is for your reference:
If the issue still persists, could you please supply more information about the issue? Such as steps you have taken to add the URL or other else. If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Coldfusion and SQL reporting service 2005?
Ive been searching google for hours with no clear answer. How
can you use coldfusion to pull in an sql report from reporting
service? Via a web service or wsdl i assume, but how?Anwar,
It's important to get the terms right here.
SQL Reporting Services is not the same as SQL Server Reporting Services (SSRS).
SQL Reporting Services refers to an Azure service that lets users develop reports in the cloud. However, it is being retired in Oct. 2014, so you'll want to stay away from that.
SQL Server Reporting Services (SSRS) is the reporting module that is part of SQL Server. This is a sophisticated tool that lets developers create and publish reports that users can access through various methods. It has schedule and refresh capabilities,
and can leverage SQL Server Analysis Services (SSAS) and SQL Server Integration Services (SSIS). You'd most likely use SSRS if you're creating sophisticated reports and queries that you don't want your users creating.
SQL Report Builder is a report creation tool designed for users who want to stay in Microsoft Office. It can be used by developers or end users.
http://technet.microsoft.com/en-us/library/dd220460.aspx
Both environments let you create reports that can be shared (published) on a report server or through SharePoint.
So it's really a matter of what you're most comfortable using.
Hope that helps. -
Open source user friendly SQL Qyery+Report Builder
hi guys
Please help me find any link from where i can download OpenSource user friendly SQL Qyery+Report Builder
thanksOne would hope it was!
it is not possible to give everything that the OP may request. The closest match, now that is workable. -
I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
the timeout for the dataset is "0" seconds.
I click the "OK" button and I'm presented with the parameters to the stored procedure.
I enter valid data for the parameters and click the "OK" button.
I then get the following error message after 30 seconds:
The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
I think the smallest timeout we have is 120 seconds.
I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
To me, this is NOT a solution.
I have too many stored procedures that need to be brought into Report Builder.
I need a real solution.
Thank you for you time, Tim Caldwell.
Timothy E CaldwellI don't mean to be rude, but really, check to see if the stored procedure can return data rows???
Maybe I'm not being clear enough.
The stored procedure runs perfectly fine.
it runs perfectly fine in the production environment and the test environment.
I can access the stored procedure in several ways and have it return correct data.
I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it. After
report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
It would appear that there is something within report builder itself that is causing this issue.
The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
USE [CRUM_IT]
GO
/****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
@CompanyCode varchar(8) = null,
@GetSiblings varchar(1) = 'N'
as
Begin
-- get emergency contact info
select *
into #tmp_Contacts
from
(select
ConEEID,
con.connamelast as [Emer Contact Last Name],
con.connamefirst as [Emer Contact First Name],
con.connamemiddle as [Emer Contact Middle Initial/Name]--,
,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
,ISNULL(
case when con.conphonepreferred = 'H'
then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
end,
) as [Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
where con.ConIsEmergencyContact='y'
and con.ConIsActive='y'
) A
where A.rn = 1
CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
If @GetSiblings = 'Y'
Begin
INSERT INTO #tmp_CompanyCodes (CompanyCode)
EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
End
INSERT INTO #tmp_CompanyCodes
values (@CompanyCode)
select *
into #tmp_Company
from [ultiprosqlprod1].[ultipro_crum].dbo.Company
where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
select distinct
cmpcompanycode as [Client ID],
CmpCompanyDBAName as [Client Name],
eec.eecEmplStatus AS [Employment Status],
eec.eecEmpNo AS [Employee Num],
rtrim(eep.eepNameLast) AS [Last Name],
rtrim(eep.eepNameFirst) AS [First Name],
isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
rtrim(eep.eepAddressLine1) AS [Address Line 1],
isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
eep.eepAddressCity AS [City],
eep.eepAddressState AS [State],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 1, 5)
ELSE rtrim(eep.eepAddressZipCode)
END AS [Zip code],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 6, 4)
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
WHEN len(eep.eepAddressZipCode) <= 5
THEN ''
END AS [ZIP + 4],
substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
eetFED.TAXCODE AS [FED Tax Code],
eetFED.FILINGSTATUS AS [Fed Filing Status],
eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
eetFED.ADDITIONAL AS [Additional Fed Withholding],
eetSIT.TAXCODE AS [SIT Tax Code],
eetSIT.FILINGSTATUS AS [State Filing Status],
eetSIT.EXEMPTIONS AS [State Exemption Allowance],
eetSIT.ADDITIONAL AS [Additional State Withholding],
isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
isnull((SELECT cod.codDesc
FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
WHERE cod.codCode = eep.eepEthnicID
AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
eep.eepGender AS [Gender],
isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
isnull(eecTermType,'') as [Termination Type],
isnull(TchDesc, '') as [Termination Reason],
rtrim(eec.eecJobCode) AS [WC Code],
isnull(eec.eecJobTitle, '') AS [Job Title],
pgr.pgrPayFrequency AS [Pay Frequency],
eec.eecFullTimeOrPartTime AS [Full/Part Time],
eec.eecSalaryOrHourly AS [Pay Type],
isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
[YTD Hours],
isnull(eep.eepNameFormer, '') AS [Maiden Name],
eec.eecLocation AS [Location ID],
rtrim(eec.eecOrgLvl1) AS [Department ID],
eec.eecorglvl2 AS [Cost Item],
eec.eecorglvl3 as [Client Project],
eec.eecPayGroup as [Pay Group],
isnull(eepAddressEMail,' ') as [Email Address],
isNull(BankName1,' ') as PrimaryBank,
isNull(BankRoute1,' ') as PrimaryRouteNum,
isNull(Account1,' ') as PrimaryAccount,
isNull(AcctType1,' ') as PrimaryAcctType,
isNull(DepositRule1,' ') as PrimaryDepositRule,
isNull(BankName2,' ') as SecondaryBank,
isNull(BankRoute2,' ') as SecondaryRouteNum,
isNull(Account2,' ') as SecondaryAccount,
isNull(AcctType2,' ') as SecondaryAcctType,
isNull(DepositRule2,' ') as SecondaryDepositRule,
isNull(
CASE
WHEN DepositRule2 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
WHEN DepositRule2 = 'P'
THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as SecondaryDepositAmount,
isNull(BankName3,' ') as ThirdBank,
isNull(BankRoute3,' ') as ThirdRouteNum,
isNull(Account3,' ') as ThirdAccount,
isNull(AcctType3,' ') as ThirdAcctType,
isNull(DepositRule3,' ') as ThirdDepositRule,
isNull(
CASE
WHEN DepositRule3 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
WHEN DepositRule3 = 'P'
THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as ThirdDepositAmount,
Supervisor,
eec.eecEEID AS [Employee EEID],
eec.EecJobCode As [Job Code],
isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
con.[Emer Contact Last Name],
con.[Emer Contact First Name],
con.[Emer Contact Middle Initial/Name],
con.[Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
ON eep.eepEEID = eec.eecEEID
inner join #tmp_Company cmp WITH (NOLOCK)
ON eec.eecCOID = cmp.cmpCOID
inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
ON eec.eecPayGroup = pgr.pgrPayGroup
left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
on tchCode = eecTermReason
left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
eeeEEID,
eeeCOID
from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
group by eeeCOID,eeeEEID)eee
on eec.eecEEID = eee.eeeEEID
and eec.eecCOID = eee.eeeCOID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode = 'USFIT'
)eetFED
ON eec.eecCOID = eetFED.COID
and eec.eecEEID = eetFED.EEID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode like '%SIT'
AND eetIsWorkInTaxCode = 'Y'
)eetSIT
ON eec.eecCOID = eetSIT.COID
and eec.eecEEID = eetSIT.EEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName1,
eddEEBankRoute BankRoute1,
eddAcct Account1,
EddAcctType AcctType1,
EddDepositRule DepositRule1,
EddAmtOrPct EddAmtOrPct1
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '99')edd
ON eec.eecCOID = edd.eddCOID
and eec.eecEEID = edd.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName2,
eddEEBankRoute BankRoute2,
eddAcct Account2,
EddAcctType AcctType2,
EddDepositRule DepositRule2,
EddAmtOrPct EddAmtOrPct2
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '01')edd2
ON eec.eecCOID = edd2.eddCOID
and eec.eecEEID = edd2.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName3,
eddEEBankRoute BankRoute3,
eddAcct Account3,
EddAcctType AcctType3,
EddDepositRule DepositRule3,
EddAmtOrPct EddAmtOrPct3
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '02')edd3
ON eec.eecCOID = edd3.eddCOID
and eec.eecEEID = edd3.eddEEID
left outer join (SELECT eecCOID,
eecEEID,
rtrim(eepNameLast) + ', ' +
rtrim(eepNameFirst) + ' ' +
isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
on eeceeid = eepeeid)eec2
ON eec.eecSupervisorID = eec2.eecEEID
left outer join #tmp_Contacts con
on eep.eepEEID = con.ConEEID
order by [Client ID],
[Last Name],
[First Name]
drop table #tmp_Contacts
END
Timothy E Caldwell -
Having Problems with connections and access. I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
First, let me explain what I have done to date.
1) I am using Windows 7 - Home Premium.
2) I downloaded and installed MS SQL Server 2008 R2 Express. This was successful.
3) I downloaded Report Server 3.0 - This was successful.
4) In IE, I tried logging onto http://servername/reports, but this failed. After logging into IE
via ' Run Administrator', I was able to access URL.
Next, I updated the security / trust sites as explained in the
threads
Next, I went to Folder Setting and added my user name and granted all roles (Browser,
Content Manager, My
Reports, Publisher and Report Builder).
5) Now, I can log into Http://servername/reports using my normal windows 7 user account.
6) Next, I opened Report Builder 3.0. However, I am having trouble connecting to report
server. I tried connecting with
http://servername/reports, but this failed.
However, If I change URL to http://servername/reportserver, it works. BUT NOW, I have
another problem. When I
execute the RUN button to create report, I get a permission
error. "PERMISSION GRANTED TO USER ARE
INSUFFICIENT FOR PERFORMING THIS OPERATION".
7) Finally, I can not save reports to http://servername/reportserver when I select "Recent
Site and Servers". ERROR
MESSAGE: UNABLE TO OPEN OR SAVE REPORT
8) In my Reporting Services Configuration Manager:
Web URL = http://servername:80/ReportServer
Report Manager URL = http://servername:80/reports.
What is strange, the Report Manager URL works for IE URL and WEB URL works for
Report Builder connect (Even though it really does not work).
THREE QUESTIONS:
1) What URL should I use to connect in Report Builder.
2) How do I update my normal Windows 7 user so I can run reports when I connect to report
builder.
3) How can I save my reports so they are displayed in IE Reporting services. Note: I was
able to save report to
documents folder and import into IE Reporting Services.
4) And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services. I
save seen samples of Reporting Services screens where the instructor has Report Builder
tab.
Thanks
DanTo answer question 1... it should connect through /ReportServer
http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website. If you are having issues, you might download and install it and try running it as an administrator. -
Report Builder 1.0 for SQL Server Reporting Services 2008 R2
We are trying to implement Ad-Hoc Reporting using SSRS 2008 R2.
First of all, it is very unhelpful that all SSRS books are for either 2008 or 2012, even though SSRS has major changes in 2008 R2 compared to 2008.
Our instructional materials indicate that we should build Report Models to abstract out our databases into terms familiar to our business users.
The problem we are having is the difference in functionality between Report Builder 1.0 and Report Builder 3.0. Report Builder 3.0 is touted as having the modern, ribbon based interface that is supposed to make end-users feel more comfortable. However,
all the documentation says that end users are supposed to use Report Builder 1.0 for Ad-Hoc Reporting. And, it seems, that the reports generated by Report Builder 1.0 are not round-trip compatible with all the other reporting tools for SSRS 2008 R2.
The documentation we have illustrates that Report Builder 1.0 is nice for Ad-Hoc reporting, because is based on connecting directly to Report Models, and the end users can directly drag-and-drop entities and fields into their reports.
When we try working with Report Builder 3.0, it seems we must first connect to the Report Model as a Data Source and then build a Dataset query on the Report Model. Only then are some entity attributes available to be dropped into the report.
If the user decides another source column is needed, they have to go back, edit the query, save the query, and then drag the column from the Dataset to the report. This does not seem end user friendly at all!
We are also concerned that if we train our users on the seemingly soon-to-be-obsolete Report Builder 1.0, and get them used to having direct Report Model access, that at some point we will have to move them to the Dataset-interrupted approach of Report Builder
2+. Highlighting this perception of impending obsolescence of Report Builder 1.0 is that in our shop that is starting with SSRS 2008 R2, we cannot figure out how to get a copy of Report Builder 1.0 in the first place.
We just don't see our end users being savvy enough to handle the steps involved with creating Datasets on top of Report Model Data Sources. So we would have to build the Datasets for them. But in that case, what point is there in creating any
Report Models in the first place if DBAs are the ones to make Datasets?
As such, it is hard to envision a forward-looking SSRS implementation that has the end user ease-of-use Ad-Hoc reporting that the SSRS 2008 documentation presents.
What is it that Microsoft actually wants/expects SSRS implementers to do?
Dan Jameson
Manager SQL Server DBA
CureSearch for Children's Cancer
http://www.CureSearch.orgHi Dan,
Report Builder 1.0
Simple template-based reports
Requires report model
Supports only SQL Server, Oracle, and Analysis Services as data sources
Supports RDL 2005
Bundled in SSRS
Report Builder 2.0 or later
Full-featured reports as the BIDS Report Designer
Doesn't require (but supports) report models
Supports any data source
Supports RDL 2008
Available as a separate web download
In your scenario, you want to use Report Builder 1.0 in SQL Server Reporting Services 2008 R2, I am afraid this cannot achieve. Report Builder 1.0 is available in the box in either SQL 2005 or SQL 2008. It is not available as a separate client apps and is
only available as a click once application.
Report Builder 1.0
Report Builder 3.0
Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Issue With Report Builder After Installing SP3 for SQL 2008 R2
Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
Server : Microsoft-HTTPAPI/2.0
X-AspNet-Version: 2.0.50727
Application url :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server : Microsoft-HTTPAPI/2.0
X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
+ File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Query a dataset in MS SQL Server Report Builder and get splitted output of one of the fields
Hi experts,
I have a dataset in MS SQL Server Report Builder containing some rows like the following:
FIELD-1
FIELD-2
FIELD-3
1
efgh
xjhg[R]ztazutsuz[R]9
2
abcd
1234[R]abcd[R]5678
What I need is:
FIELD-1
FIELD-2
FIELD-3
1
efgh
xjhg
1
efgh
ztazutsuz
1
efgh
9
2
abcd
1234
2
abcd
abcd
2
abcd
5678
Can this be done?
I'll be very happy when one finds a solution.
Kind regards,
Petertry like this..
Declare @ta table ([FIELD-1] int, [FIELD-2] nvarchar(100), [FIELD-3] nvarchar(100))
insert into @ta
select 1, 'efgh', 'xjhg[R]ztazutsuz[R]9' union all
select 2, 'abcd', '1234[R]abcd[R]5678'
select t.[FIELD-1],t.[FIELD-2], a.b.value('.','nvarchar(100)') as [FIELD-3] from @ta t
Cross apply
(select cast('<R><C>' + replace(t.[FIELD-3],'[R]','</C><C>')+ '</C></R>' as xml) as XStr ) x
Cross apply x.xstr.nodes('R/C')a(b)
Thanks,
Saurabh
http://www.linkedin.com/in/sbhadauria http://www.experts-exchange.com/M_6313078.html -
Help with Oracle Report Builder and SQL Server2000
Hey guys,
I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
Thank You
KeyHave a look at the reports help for the purpose header and trailer sections. Here is an exert:
"Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports." -
Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, NamanHi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu
Maybe you are looking for
-
Not Able To View Data in Web Service Model
Hi , I m trying to view a table using web service model. When i write the same code for binding it to context , i m able to view its data. But not so while using Web Service Model(not adaptive web service model). The code is: Re
-
Macbook Pro died and will not turn on any longer
I am hoping someone can give me some insight into what has happened with my Macbook. I have a 2008 17" Macbook Pro A1261. The other day I was working on battery life and noticed it was about to drain, so I plugged in my adapter. The adapter was not l
-
In the vi that I am writing I have rise and fall times to post in a very specific pattern. I can initialize an array,and I can replace elements, but in "replace element" I only find that I am given the choice of specifying a single dimensional positi
-
Salary in the current month and the previous one
Hi I have a table that stores payroll details like the following stracture earn code period from period to user_id time I want to do one report which displays both the salary of one employee in the current month and his salary is the previous one Tha
-
Email attachment Microsoft vs Adobe Reader
I have a Dell Inspiron 2200 notebook and out of the blue when I open an attachment to an email Microsoft Word converts the attachment to unreadable info instead of opening it with Adobe Reader. Anyone have an idea what is going on? Thanks, Ilene