SQL server 2014 cloud adapter (Azure) how to install manually?

The SQL Server Cloud Adapter is installed when you use a pre-configured Azure VM for SQL Server:
http://msdn.microsoft.com/en-us/library/dn169301(v=sql.120).aspx
How do you install this if you do your own manual SQL Server install on an Azure VM?
If it is not installed, can you still use the Deploy to Azure wizard in Management Studio?
Tim

Hello,
To deploy a SQL Server database to a Windows Azure vitual machine the cloud adapter is required.
You can download and install it from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=42295
(ENU\x64\SqlCloudAdapter.msi)
The following article may help you configure this adapter:
http://msdn.microsoft.com/en-us/library/dn169301(v=sql.120).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1

Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?

Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Problem: VSS error with 'SQL Server Backup to Windows Azure Tool' installed

When 'SQL Server Backup to Windows Azure Tool' is installed, shadow copies cannot be enable and backups fail. When attempting to enable shadow copies, we get a "volsnap" error: "The shadow copies of volume X were aborted because
of a failed free space computation". After uninstalling the "Tool", VSS works. Reinstalling "Tool" causes the problem to return.
While the error suggests a space issue, there is plenty of space on the server's two volumes. Additionally, another 100GB volume was added and VSS storage was allocated to it; still received the error.
Issue seems to point to 'SQL Server Backup to Windows Azure Tool'.
Environment: Hyper-V guest: "Windows Server 2012 R2 Standard" with "SQL Server 2008 R2 Standard". Using "Azure Storage" for SQL backups.
Suggestions?

Hello,
Yes, we have a confirmed interference between the tool and the VSS Framework. This was identified very recently and is under investigation by the product group. Since the issue is within the filter driver shipped by the tool, that unfortunately means that
you currently need to choose between the tool and a working VSS Framework. If the latter is more important, then uninstall the tool (that will require a restart).
We apolologize for the inconvenience. I'm going to try to get the home page of the tool updated to avoid other situations like yours. Hopefully we should see a new version of the tool soon.
As a side note, recent versions of SQL Server can directly use Azure Storage as backup target, see
http://msdn.microsoft.com/en-us/library/jj919148(v=sql.110).aspx.
Regards,
Guillaume Fourrat - Microsoft France

SQL Server 2014 Express LocalDB automatic instance is not created

I have just installed SQL Server 2014 Developer Edition and noticed that there is no v12.0 automatic instance. Instead, there is MSSQLLocalDB automatic instance. Is this a bug?

Hi Alex,
According to your description, we need to verify if you install SQL Server 2014 Developer edition and SQL Server 2014 express edition. LocalDB is only just a lightweight version of Express version that has all its programmability features. If you install
SQL Server 2014 express LocalDB, please ensure you install automatic instances of LocalDB and not named instance of LocalDB. Usually,
when the target machine has the specified version of LocalDB installed, the automatic instance of
LocalDB for that version is available on the target machine as well. The name for the automatic instance is a single v character followed by the
LocalDB release version number in the format
xx.x. For example, v12.0 represents SQL Server 2014. For more information, see:
http://msdn.microsoft.com/en-us/library/hh510202(v=sql.120).aspx
If the issue still exists after checking the above suggestions, you can submit a feedback to Microsoft such issues, I would recommend to submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback. This connect site will serve as a connecting point between you and Microsoft, and ultimately the large community for you and Microsoft to
interact with. Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

SSDT/VisualStudio requirements for SQL Server 2014

Hi
What is the minimum version of SSDT (VS Shell) is required for the creation of BI solutions in SQL Server 2014?
I have VS2010 (was installed from SQL Server 2012 installation media) but this will not work with SQL Server 2014.

Hello Roger,
the current Releases of SSDT are not longer available for Visual Studio 2010, only for VS 2012/2013.
When you install a current SSDT Version, also the related VS as integrated Shell be installed, you can get SSDT-BI/Tooling here: http://msdn.microsoft.com/en-us/data/hh297027
Olaf Helper
[ Blog] [ Xing] [ MVP]

Installing App-Controller DB on SQL Server 2014

Hi Folks,
I have SCVMM 2012 installed on a Windows Server 2012 R2 server with SQL Server 2014. I would like to install the App-Controller s/w, however I am getting an error at the configure SQL server database stage "The specified SQL Server instance is not a
supported version or edition"
Does anyone know a work-a-round for this?

Hi AndyW
Which edition of SQL Server are you using? (e.g. Express, Developer, Standard, Datacenter)
App Controller won't install on Express or Developer.
Regards
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

How to clean uninstall SQL Server 2014?

Hi,
I had SQL Server 2014 Management Studio installed, and I decided to try to install CU5 to get some more of the Azure functionality back in SSMS. Unfortunately it didn't work, so I decided to uninstall SQL 2014 MS. After doing so, I realized that the CU5
update was still 'installed' in add/remove programs, and I could no longer uninstall it. I've tried reinstalling SQL Server 2014 MS, but it won't allow me to apply the CU5 update anymore. Is there any way I can either apply the CU5 update, or just nuke everything
and try to restart from scratch without reinstalling Windows? Also I have VS2013/VS2015 installed if that makes a difference (I'd really rather not have to reinstall those). Thanks!
Tommy

SQL Server 2014 Evaluation, Already installed on Windows 2012 Server .So kindly let me know how to convert in to the License copy. Right now, We have license of SQL Server 2014.
You need to purchase valid license from Microsoft. before that please read
upgrade matrix by Microsoft which says what version can be upgraded from evaluation edition.
If you have cluster direct upgrade has limited supported please read that as well.
When you have Licensed version Just click on setup.exe file of licensed version then on window which posp up select maintenance and the select edition upgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How to restore a database backup taken from a SQL Server 2012 instance to SQL Server 2014

I am trying to restore a database backup taken from a SQL Server 2012 instance to my new SQL Server 2014 instance. When I add the .bak through the Mgmt studio UI, it does not seem to find a backup set in the file so I cannot proceed (does not give
me any errors though either. I tried restoring through TSQL command but only got a database restore terminating abnormally error with no other details. How can I restore this database to SQL 2014?

Hello,
Please examine SQL Server Error Log and share with us any error you can find. The following article may locate the log:
http://msdn.microsoft.com/en-us/library/ms187109.aspx
Regards,
Alberto Morillo
SQLCoffee.com

How to install a Business Contact Manager 2013 database on SQL Server 2014

When I use the BCM Database Tool 2013 to create a database on a server, it doesn't pick up on any of my SQL Server 2014 instances. So far I can only get it to pick up SQL Server 2008 R2 instances in order to install the BCM database.
Someone mentioned that it works with SQL Server 2012, so is there any way to get it work on the 2014 version? I don't want to have to install 2008 or 2012 just for the sake of BCM.

event if 3355 means 3 things:
The SQL Server might be offline.
The SharePoint Foundation database access account might not have the necessary permissions to communicate with the SQL Server.
A firewall that runs on either the local server or on SQL Server might be blocking network communications.
Big question, how you trying to connect SQL windows or sql authentication? is it throwing error on Config wizard or somewhere else?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to run SQL SERVER 2014 EXPRESS ON WINDOWS 8?

I installed SQL SERVER 2014 EXPRESS(132 mb) after that when I check "All programs" I don't see any GUI to use SQL.
I know MySQL and Linux. In MySQL client I can do,
$MySQL -p -u root Password:*****
but in SQL SERVER which client GUI I can use. How do I run queries?
Can anyone give me suggestions to use SQL server. Please

Please download SQL Server Management Studio Express from the following URL. When installing it finished you can see it in "All Programs" or simply by calling it via Run... using this command:
ssms.exe
Download Microsoft SQL Server 2014 Express
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

I Cant find Sql Server 2014 express edition after installing it. How do I start the program

Hello,
I have Installed Sql Server 2014 Express edition and downloaded the AdventureWorks 2014 database and Back up files.
I cannot find an Icon for the Sql Server on my Desktop to start the Sql program. There is only an icon for the Server Installation Center.
How do I start the Sql server. I tried opening the AdventureWorks Database but I cant open it.
Thank you

Thanks Shanky
When I installed Sql I chose Windows Login. After Installing I logged into Sql server using windows account. Should I have chosen an Sql account instead.
Hi,
Its is Ok if you have chosen windows Login. But it should be part of local administrator. I assume you know how to check
Is it not a security risk having to run Sql server as an administrator when using windows account or sql account.
Yes it is but at this point where I guess only you would be using and to get around with problem which you are facing. its recommended to run SQL server service with least privileged domain account. If you wan to read more see
this link
How do I make sure the account with which SQL Server service is running has full permission on folder where adventure works mdf and ldf files are located.
Please make a habit to search on net it is filled with lot of information.
This link would help.
Locate the folder on drive where AD mdf and ldf file reside. Right click on folder select properties and then select security tab. Click on add and then type account name and search and add it
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Why is the PWDCOMPARE function not supported on an Azure SQL Server 2014 database

I have tried to publish a database from our local SQL Server to Azure but receive an error saying PWDCOMPARE is not supported with no link to a reason why.
We are using HASHBYTES function to encrypt passwords in our database and
PWDCOMPARE to validate them and we currently don't have an alternative (see article: http://sqlity.net/en/2460/sql-password-hash/). The PWDCOMPARE function is referenced by a stored procedure,
which is what won't publish to Azure.
It would be useful to know if it will be supported or if we should create a VM instead.
EDIT: Further Clarified question above, but basically the functions listed are documented in MSDN and there is no mention of them being undocumented unsupported features.
The error occurs when trying to publish a database to Azure from SQL Server 2014 Management Studio

Hi,
I am not an expert to answer this but am trying my best to answer this query.
Hashes a password and compares the hash to the hash of an existing password. PWDCOMPARE can be used to search for blank SQL Server login passwords or common weak passwords.
Syntax
PWDCOMPARE ( 'clear_text_password'
, password_hash
[ , version ] )
Note: This feature will be removed in the next version of Microsoft SQL Server. Do not use this feature in new development work, and modify applications that currently use this feature as soon as possible.
I am not sure whether this feature is not available on SQL 2014.
I think you can solve this issue by using the EXECUTE AS. Add this query into a procedure with EXECUTE AS with the user/login with sufficient permissions on the server.
Refer to belw link for more details on EXECUTE AS
http://msdn.microsoft.com/en-us/library/ms188354.aspx
create
procedure checkpassword
@UserName
SYSNAME
,@Password
VARCHAR(1000)
WITH
EXECUTE AS
'<UserName>'
as
select
pwdcompare(@Password,convert(nvarchar(128),password))
from master.dbo.syslogins
(nolock)
where name=@UserName
GO
EXEC checkpassword
@UserName='test',@Password='12345678'
Girish Prajwal

How to use open Row set in sql server 2014

Hello All,
How to open the row set using sql server 2014 using link server connection.

Hi denyy,
Are you referring to the OPENROWSET function in SQL Server 2014?
The OPENROWSET method is an alternative to accessing tables in a linked server and is a one-time, ad hoc method of connecting and accessing remote data by using OLE DB. The examples below demonstrate how to use the OPENROWSET function:
A. Using OPENROWSET with SELECT and the SQL Server Native Client OLE DB Provider
SELECT a.*
FROM OPENROWSET('SQLNCLI', 'Server=Seattle1;Trusted_Connection=yes;',
'SELECT GroupName, Name, DepartmentID
FROM AdventureWorks2012.HumanResources.Department
ORDER BY GroupName, Name') AS a;
B. Using the Microsoft OLE DB Provider for Jet
SELECT CustomerID, CompanyName
FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'C:\Program Files\Microsoft Office\OFFICE11\SAMPLES\Northwind.mdb';
'admin';'',Customers);
GO
C. Using OPENROWSET to bulk insert file data into a varbinary(max) column
USE AdventureWorks2012;
GO
CREATE TABLE myTable(FileName nvarchar(60),
FileType nvarchar(60), Document varbinary(max));
GO
INSERT INTO myTable(FileName, FileType, Document)
SELECT 'Text1.txt' AS FileName,
'.txt' AS FileType,
* FROM OPENROWSET(BULK N'C:\Text1.txt', SINGLE_BLOB) AS Document;
GO
D. Using the OPENROWSET BULK provider with a format file to retrieve rows from a text file
SELECT a.* FROM OPENROWSET( BULK 'c:\test\values.txt',
FORMATFILE = 'c:\test\values.fmt') AS a;
Reference:
OPENROWSET (Transact-SQL)
Using the OPENROWSET function in SQL Server
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

How to convert Oracle User defined datatype to SQL Server 2014 using SSMA Version 6.0

I am trying to convert Oracle 11g OE schema to SQL Server 2014, using SSMA version 6.0
Getting an error in converting the Oracle View to SQL Server
CREATE OR REPLACE VIEW OC_CUSTOMERS OF OE.CUSTOMER_TYP WITH OBJECT IDENTIFIER (customer_id) AS
SELECT c.customer_id, c.cust_first_name, c.cust_last_name, c.cust_address,
           c.phone_numbers,c.nls_language,c.nls_territory,c.credit_limit,
           c.cust_email,
           CAST(MULTISET(SELECT o.order_id, o.order_mode,
                               MAKE_REF(oc_customers,o.customer_id),
                               o.order_status,
                               o.order_total,o.sales_rep_id,
                               CAST(MULTISET(SELECT l.order_id,l.line_item_id,
l.unit_price,l.quantity,
MAKE_REF(oc_product_information,
l.product_id)
FROM order_items l
WHERE o.order_id = l.order_id)
                                    AS order_item_list_typ)
                         FROM orders o
                         WHERE c.customer_id = o.customer_id)
                AS order_list_typ)
     FROM customers c
*   SSMA error messages:
*   O2SS0461: Conversion of object view is not supported.
*   OF OE.CUSTOMER_TYP
*      WITH OBJECT IDENTIFIER (customer_id)
CREATE VIEW dbo.OC_CUSTOMERS
AS
   /*Generated by SQL Server Migration Assistant for Oracle version 6.0.0.*/
   *   SSMA error messages:
   *   O2SS0481: Conversion of statement containing user defined type column 'c.cust_address' not supported.
   *   O2SS0481: Conversion of statement containing user defined type column 'c.phone_numbers' not supported.
   *   O2SS0430: Conversion of multiset conditions is not supported.
   *   CAST(MULTISET
   *      SELECT
   *         o.order_id,
   *         o.order_mode,
   *         MAKE_REF(oc_customers, o.customer_id),
   *         o.order_status,
   *         o.order_total,
   *         o.sales_rep_id,
   *         CAST(MULTISET
   *               SELECT
   *                  l.order_id,
   *                  l.line_item_id,
   *                  l.unit_price,
   *                  l.quantity,
   *                  MAKE_REF(oc_product_information, l.product_id)
   *               FROM order_items l
   *               WHERE o.order_id = l.order_id
   *            ) AS order_item_list_typ)
   *      FROM orders o
   *      WHERE c.customer_id = o.customer_id
   *   ) AS order_list_typ)
   SELECT
      c.CUSTOMER_ID,
      c.CUST_FIRST_NAME,
      c.CUST_LAST_NAME,
      c.cust_address,
      c.phone_numbers,
      c.NLS_LANGUAGE,
      c.NLS_TERRITORY,
      c.CREDIT_LIMIT,
      c.CUST_EMAIL,
      NULL
   FROM dbo.CUSTOMERS AS c   */
Any suggestion on converting this view would be helpful.
Kind regards.

Thanks Lydia Zhang for your reference urls.
Please let me know if you come across any reference articles related to
Creating a SQL Server table and View with columns as SQL Server TVP similar to Oracle UDT like
CREATE TABLE "OE"."CUSTOMERS"
   (   "CUSTOMER_ID" NUMBER(6,0),
   "CUST_FIRST_NAME" VARCHAR2(20 BYTE) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE,
   "CUST_LAST_NAME" VARCHAR2(20 BYTE) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE,
   "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" ,
   "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" ,
   "NLS_LANGUAGE" VARCHAR2(3 BYTE),
And also creating a SQL Server TVP inside an another SQL Server TVP as in Oracle
create or replace TYPE customer_typ
AS OBJECT
    ( customer_id        NUMBER(6)
    , cust_first_name    VARCHAR2(20)
    , cust_last_name     VARCHAR2(20)
    , cust_address       cust_address_typ
   , credit_limit       NUMBER(9,2)
    , cust_email         VARCHAR2(30)
    , cust_orders        order_list_typ
NOT FINAL;
Kind regards.
Venkatesha

How to install SQL Server 2014 Documentation

I installed the SQL Server 2014 Management Studio (64bit of course), that came with an empty product help. So I went to
http://www.microsoft.com/en-us/download/details.aspx?id=42557 and downloaded the file from there. Upon opening the file I got an error that the file is corrupt (after several downloads
from different machines). With 7zip I could open the file without any problem. So I copied it to a folder. Now when I want to add the folder to the helper, get error messages:
- You do not have permissions to modifiy content under that location specified for help content store
(C:\Program Data\Microsoft\HelpLibrary2\Catalog\SQL2014)
- Local help store cannot be in folders that should not be accessed by all user accounts on this computer.
Where should I copy this folder that this thing finally works. We live in 2014 and I waist already 30 minutes to get the documentation up and running that should come with the product in the first place.
Please advise (and maybe give me some insight what the people responsible for the SQL 2014 help had in mind with this concept ?)

Hi ErnestoMawan,
According to your description, you have downloaded the documentation file and you want to add that documentation for SQL Server, right?
So please follow steps below to add the documentation for SQL Server:
Double-click the self-extracting EXE to extract its contents.
Specify the location for the extracted contents. For example, a network share that is accessible to your destination computer or server.
Run Manage Help Settings. In Windows 7, launch Help Library Manager from Start, All Programs, SQL Server 2014, Help & Community and then clicking Manage Help Settings. Or, launch SQL Server Management Studio, click the Help menu, and select Manage Help
Settings.
In Help Library Manager, click Choose online or local help.
Select I want to use local help and then click OK.
Click Install content from disk and browse to the directory where you unpacked the downloaded EXE.
Select the HelpContentSetup.msha file and then click Open.
Click Next.
Click Add next to the documentation you want to install.
Click Update.
Once Help Library Manager has completed the installation process, click Finish and then click Exit to close Help Library Manager.
For more information about Add or Remove Product Documentation for SQL Server, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms166022.aspx
If you have any question, please feel free to let me know.
Regards,
Jerry Li

SQL server 2014 cloud adapter (Azure) how to install manually?

Similar Messages

Maybe you are looking for