Sql Server Network Error !!
HI
we hav 2 sys landscape ,dev and qal on one server and prd on one server dev and qal are not getting up simultaneously . when I start dev the qal is getting down and if start qal dev is getting down. but if I start dev alone its getting up and same with qal.
disp trace file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid GEQ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 164
intno 20050900
make: multithreaded, Unicode, optimized
pid 5608
Sun May 02 19:48:08 2010
kernel runs with dp version 239000(ext=110000) (@(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5608) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 164 successfully loaded
shared lib "dw_xtc.dll" version 164 successfully loaded
shared lib "dw_stl.dll" version 164 successfully loaded
shared lib "dw_gui.dll" version 164 successfully loaded
shared lib "dw_mdm.dll" version 164 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun May 02 19:48:12 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >saperpged_GEQ_01 <
DpShMCreate: sizeof(wp_adm) 28968 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06830040, size: 5086040)
DpShMCreate: allocated sys_adm at 06830040
DpShMCreate: allocated wp_adm at 06832098
DpShMCreate: allocated tm_adm_list at 068391C0
DpShMCreate: allocated tm_adm at 068391F0
DpShMCreate: allocated wp_ca_adm at 06C6F270
DpShMCreate: allocated appc_ca_adm at 06C75070
DpShMCreate: allocated comm_adm at 06C76FB0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CF7E70
DpShMCreate: allocated gw_adm at 06CF7EB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CF7EE0
DpShMCreate: allocated wall_adm at 06CF7EE8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Sun May 02 19:48:13 2010
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 3324 blocks reserved for free list.
ES initialized.
ERROR => [CreateOsShm] CreateFileMapping(62,83926 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2174]
ERROR => ShmCreate: Create (62,85940720,1) failed [shmnt.c 506]
http://support.microsoft.com/kb/155012 (Check this website)
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 12476416 K
Config. maximum size : 12476416 K
Avail. maximum size : 12476416 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
2
l:\pagefile.sys
4096000 K
4096000 K
4096000 K
4096000 K
3
z:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 11569000 K
Commit Charge Limit : 11632572 K
Commit Charge Peak : 11569000 K
Phys.Memory Total : 54 K
Phys.Memory Available : 93191052 K
File Cache : 17424022 K
Kernel Memory Total : 2084222616 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 93191080 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 806584 K
Private Pages : 0 K
Total heap size : 12184 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6764 K
Allocated heap memory : 5306 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
1848
sapstartsrv.exe
15944 K
15952 K
18744 K
18748 K
4
1708
msg_server.EXE
[MS] GEQ_01
8244 K
8244 K
10516 K
10516 K
2
5608
disp+work.EXE
24812 K
24940 K
67980 K
68112 K
6
384
igswd.EXE
[**] GEQ_01
2820 K
3064 K
1524 K
1804 K
0
4396
igsmux.exe
11916 K
11916 K
13040 K
13040 K
2
6016
igspw.exe
2560 K
2560 K
2424 K
2424 K
0
4900
igspw.exe
2560 K
2560 K
2424 K
2424 K
0
Sum
68856 K
116652 K
ERROR => ShmCreate(62, 85940712) failed 1 [mpixx.c 867]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 5064]
DP_FATAL_ERROR => DpSapEnvInit: DpInitMpi failed
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun May 02 19:48:23 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun May 02 15:48:23 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 DIA -1 Run no 0 0 0
7 DIA -1 Run no 0 0 0
8 DIA -1 Run no 0 0 0
9 DIA -1 Run no 0 0 0
10 UPD -1 Run no 0 0 0
11 ENQ -1 Run no 0 0 0
12 BTC -1 Run no 0 0 0
13 BTC -1 Run no 0 0 0
14 BTC -1 Run no 0 0 0
15 SPO -1 Run no 0 0 0
16 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Sun May 02 15:48:23 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Sun May 02 15:48:23 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun May 02 15:48:23 2010
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun May 02 19:48:28 2010
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >saperpged_GEQ_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
[DpWpDied] W13 handle not set (PID:-1)
[DpWpDied] W14 handle not set (PID:-1)
[DpWpDied] W15 handle not set (PID:-1)
[DpWpDied] W16 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5608) [dpxxdisp.c 10705]
Good Bye .....
> *** ERROR => [CreateOsShm] CreateFileMapping(62,83926 KB) failed with Err=1455
> ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2174]
> *** ERROR => ShmCreate: Create (62,85940720,1) failed [shmnt.c 506]
If you run two instances on one server you have to carefully configure the memory for each of them. If you just use the default memory settings that are taken by sapinst things like that happen.
As you can see in the log the system is trying to allocate 8 GB memory which is not available.
So configure the PHYS_MEMSIZE instance parameter of each of the instances so they both fit into physical memory.
Markus
Similar Messages
-
Java.sql.SQLException: Network error IOException: Connection refused:
hi...i am tryin to connect to sqlserver2000 ....i wanted a dsnless connection...i have downloaded jtds driver...set the classpath..no joy..i'm connecting to sqlserver's default port 1433..i also confirmed that sqlserver tcp is enabled...still gettin the same err:
java.sql.SQLException: Network error IOException: Connection refused: connect
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java
:385)
at net.sourceforge.jtds.jdbc.ConnectionJDBC3.<init>(ConnectionJDBC3.java
:50)
at net.sourceforge.jtds.jdbc.Driver.connect(Driver.java:182)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at SQLServerConnect.getConnection(SQLServerConnect.java:27)
at SQLServerConnect.displayDbProperties(SQLServerConnect.java:44)
at SQLServerConnect.main(SQLServerConnect.java:80)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
at java.net.Socket.connect(Socket.java:507)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at net.sourceforge.jtds.jdbc.SharedSocket.createSocketForJDBC3(SharedSoc
ket.java:304)
at net.sourceforge.jtds.jdbc.SharedSocket.<init>(SharedSocket.java:255)
at net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java
:310)
... 7 more
Error Trace in getConnection() : Network error IOException: Connection refused:
connect
Error: No active Connection
i even tried connecting to the port 1433 thru telnet...err:Could not open connection to the host, on port 1433:connection failed...
i thought it cud b a firewall issue...disabled my windows firewall..no joy..
can ne body help me with this....need to solve this desparately
thanks in advance
judeOld, but still coming up in google searches. Here's the solution that worked for me:
Dynamic Port Allocation explained:
http://support.microsoft.com/kb/823938
How to: Configure a Server to Listen on a Specific TCP Port (SQL Server Configuration Manager)
http://support.microsoft.com/kb/823938
In case that dissappears:
To assign a TCP/IP port number to the SQL Server Database Engine
1. In SQL Server Configuration Manager, in the console pane, expand SQL Server 2005 Network Configuration, expand Protocols for <instance name>, and then double-click TCP/IP.
2. In the TCP/IP Properties dialog box, on the IP Addresses tab, several IP addresses appear, in the format IP1, IP2, up to IPAll. One of these are for the IP address of the loopback adapter, 127.0.0.1. Additional IP addresses appear for each IP Address on the computer. Right-click each address, and then click Properties to identify the IP address that you wish to configure.
3. If the TCP Dynamic Ports dialog box contains 0, indicating the Database Engine is listening on dynamic ports, delete the 0.
4. In the IPn Properties area box, in the TCP Port box, type the port number you wish this IP address to listen on, and then click OK.
5. In the console pane, click SQL Server 2005 Services.
6. In the details pane, right-click SQL Server (<instance name>) and then click restart, to stop and restart SQL Server. -
Network protocols are not showing in sql server network configuration manager
Hi,
We are running 64 bit SQL server 2012 SP1 version. Everything was working fine but suddenly SQL server network configuration showing blank.
So please suggest how do I get it back.Hello,
Could you please try to repair the installation?
http://technet.microsoft.com/en-us/library/cc646006(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Database link to SQL Server Init error
Hi all,
i´m tryng to create a dblink between Oracle 10.2.0 in a RHEL4 and a SQL Server.
I can connect using isql but when i try using sqlplus i obtain this error:
SQL> CREATE DATABASE LINK dbl
CONNECT TO "user"
IDENTIFIED BY "pwd"
USING 'hsodbc'; 2 3 4
Enlace con la base de datos creado.
SQL> SELECT * FROM Table_1@dbl;
SELECT * FROM Table_1@dbl
ERROR en línea 1:
ORA-28545: error diagnosticado por Net8 al conectar a un agente (error in Net8 while connecting an agent)
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a DBL
This is the error explanantion in Oracle Docs:
I think the problem is the ini file inithsodbc.ora.
inithsodbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
# AAB - Parametros para asociar un agente ODBC al HS
HS_FDS_CONNECT_INFO = MSQLS
HS_FDS_TRACE_LEVEL = ON
HS_FDS_SHAREABLE_NAME =/usr/local/freetds/lib/libtdsodbc.so
HS_AUTOREGISTER = true
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
listener.ora
# listener.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = STA2)
(ORACLE_HOME = /app/oracle/oracle/product/10.2.0/db_1)
(SID_DESC = (SID_NAME=hsodbc)
(ORACLE_HOME=/app/oracle/oracle/product/10.2.0/db_1)
(PROGRAM=hsodbc)
(ENVS=LD_LIBRARY_PATH=/app/oracle/oracle/product/10.2.0/db_1/lib:/usr/local/lib)
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEVSTA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = devSTA)
STA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = STA2)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
STA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STA)
#AAB - Descripcion de servicio para conectar con SQLServer
HSODBC = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=nemesisgr2.hi.inet)
(PORT=1521)
(CONNECT_DATA = (SID=hsodbc)
(HS = OK)
ODBC Files
odbc.ini
[ODBC Data Sources]
MSQLS = Microsoft SQL Server
[MSQLS]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Description = Microsoft SQL Server
Trace = No
Servername = sqlserver
Database = master
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
odbcinst.ini
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[MSQLSDRIVER]
Description = Driver for MS SQL Server
Driver = /usr/local/freetds/lib/libtdsodbc.so
Setup = /usr/lib64/libtdsS.so
FileUsage = 1
UsageCount = 5
freetds.conf
# $Id: freetds.conf,v 1.12 2007/12/25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
# TDS protocol version
; tds version = 4.2
# Whether to write a TDSDUMP file for diagnostic purposes
# (setting this to /tmp is insecure on a multi-user system)
; dump file = /tmp/freetds.log
; debug flags = 0xffff
# Command and connection timeouts
; timeout = 10
; connect timeout = 10
# If you get out-of-memory errors, it may mean that your client
# is trying to allocate a huge buffer for a TEXT field.
# Try setting 'text size' to a more reasonable limit
text size = 64512
# A typical Sybase server
[egServer50]
host = symachine.domain.com
port = 5000
tds version = 5.0
# A typical Microsoft server
[egServer70]
host = ntmachine.domain.com
port = 1433
tds version = 7.0
# Test MS SQl Server
[sqlserver]
Database = master
host = pruebas.hi.inet
port = 1433
tds version = 7.0
Any ideas??
Thanks in advance.
AlexI have changed the inithsodbc.ora file including:
HS_FDS_SHAREABLE_NAME =/usr/lib/libodbc.so (I have ODBC installed)
Here you are the other information:
lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:29:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Bienvenido a LSNRCTL, escriba "help" para obtener información.
LSNRCTL> status
Conectándose a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=nemesisgr2.hi.inet)(PORT=1521)))
ESTADO del LISTENER
Alias LISTENER
Versión TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Fecha de Inicio 22-OCT-2008 19:31:34
Tiempo Actividad 0 días 13 hr. 58 min. 29 seg.
Nivel de Rastreo off
Seguridad ON: Local OS Authentication
SNMP OFF
Parámetros del Listener /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log del Listener /app/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Recibiendo Resumen de Puntos Finales...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nemesisgr2)(PORT=1521)))
Resumen de Servicios...
El servicio "STA" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2" tiene 2 instancia(s).
La instancia "STA2", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2XDB" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2_XPT" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STAXDB" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA_XPT" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "hsodbc" tiene 1 instancia(s).
La instancia "hsodbc", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
El comando ha terminado correctamente
LSNRCTL>
hsodbc
There is no output executing this command.
[oracle@nemesisgr2 ~]$ /app/oracle/oracle/product/10.2.0/db_1/bin/hsodbc
[oracle@nemesisgr2 ~]$
tnsping hsodbc
[oracle@nemesisgr2 ~]$ tnsping hsodbc
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:35:58
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Archivos de parámetros utilizados:
/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Adaptador TNSNAMES utilizado para resolver el alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=nemesisgr2.hi.inet) (PORT=1521)) (CONNECT_DATA = (SID=hsodbc)) (HS = OK))
Realizado correctamente (40 mseg)
Rgds,
Alex -
Hi All,
I am pulling data from SQL server(view) using WCF-SQL adapter, in DEV it's working fine and in test following is the error
I have checked the credentials and server name all are fine, But i couldn't figure out the issue.
Thanks in Advace
Recloc_WCFSQL
mssql://SQLSERVERTest/biztalkdb?InboundId=xyz
WCF-SQL
Microsoft.ServiceModel.Channels.Common.ConnectionException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString
connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection
owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout,
Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection) at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1
retry) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() --- End of inner exception stack trace --- at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() at Microsoft.Adapters.Sql.ASDKConnection.Open(TimeSpan
timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnection(Guid clientId, TimeSpan timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnectionHandler[TConnectionHandler](Guid clientId, TimeSpan timeout,
MetadataLookup metadataLookup, String& connectionId) at Microsoft.ServiceModel.Channels.Common.Channels.AdapterChannelListener`1.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.Enable()
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint..ctor(BizTalkEndpointContext endpointContext, IBTTransportProxy transportProxy, ControlledTermination control) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiver`2.AddReceiveEndpoint(String url,
IPropertyBag adapterConfig, IPropertyBag bizTalkConfig)The first few things to check would be
Is TCP/IP Protocol enabled on the Test SQL Server Instance?
If it is configured is it running on the default port or a different port has been specified? In case a different port has been specified then your configuration URI should reflect that OR the SQLBrowser service needs to be running
The MS DTC configuration on the SQL Server need to have been configured with BOTH inbound/outbound enabled (Component Management - DTC)
The Windows Firewall on the BizTalk Server Test should be a) disabled or b) configured to permit connection to the SQL Server on either 1433 or the specific instance port.
Regards. -
Installation of SCCM 2012 R2 and SQL Server 2014 error
Hello All,
I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box.
Any suggestions would be appreciated.
Thanks,
Tucker
Update: When running the Pre-Req check these are some of the failed returns.....
SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
Not sure why it is recognizing SQL Express as this is a new machine.
SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure
the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
For the SQL Service I am using a domain account created specifically for this.This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
Torsten Meringer | http://www.mssccmfaq.de -
Sql Server 2014 - Error message: Failed to read BLOB column
Hi all,
Am experiencing this error in Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Enterprise Edition (Build 7601: Service Pack 1).
Error messages:
Message: Failed to read BLOB column
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String
strWhereClause, Boolean useTableLockHint, Int32 bcpFileFormatVersion)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Please can you assist me on this issue.The error message states a communication link failure has occurred.
This is most likely a network related error and usually is transient.
Try to generate the snapshot again and see if the error still occurs. If the error still occurs, you will need to have a network admin check the links.
Brandon Williams (blog |
linkedin) -
""A network-related or instance-specification error occured while establishing a connection to SQL Server "" Windows Firewall is on ! what should i do , or change to connect , please help , please
QUOTE from an article on the topic: "
Firstly,
Make sure your database engine is configured to accept remote connections
• Start > All Programs > SQL Server 2005 > Configuration Tools > SQL Server Surface Area Configuration • Click on Surface Area Configuration for Services and Connections • Select the instance that is having a problem > Database Engine >
Remote Connections • Enable local and remote connections • Restart instance - See more at:
http://www.sswug.org/articlesection/default.aspx?TargetID=44331#sthash.kzSfADZL.dpuf
Secondly,
You may need to create an exception on the firewall for the SQL Server instance and port you are using • Start > Run > Firewall.cpl • Click on exceptions tab • Add the sqlservr.exe (typically located in C:\Program Files (x86)\Microsoft
SQL Server\MSSQL.x\MSSQL\Binn, check your installs for the actual folder path), and port (default is 1433) • Check your connection string as well - See more at:
http://www.sswug.org/articlesection/default.aspx?TargetID=44331#sthash.kzSfADZL.dpuf
Thirdly Check if your SQL server services is up and running properly
Go to All Programs >> Microsoft SQL Server 2008 >> Configuration Tools >> SQL Server Configuration Manager >> SQL Server Services, and check if SQL Server service status is “Running”.
In addition, ensure that your remote server is in the same network. Run “sqlcmd -L” in your command prompt to ascertain if your server is included in your network list. You can even find tutorial for the same here SQL SERVER – Find All Servers From Local
Network – Using sqlcmd – Detect Installed SQL Server on Network.
Next Enable TCP/IP in SQL Server Configuration
Go to All Programs >> Microsoft SQL Server 2008 >> Configuration Tools >> SQL Server Configuration Manager >> Select TCP/IP. Right click and select enable
Lastly Go to your firewall setting, under exception tab, select add port include TCP:1433 and tick the SQL check box."
LINK:
http://stackoverflow.com/questions/18060667/connect-to-server-a-network-related-or-instance-specific-error
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
SQL Server - Extract Error - OGG-00868 Supplemental logging is disabled
Hello,
We are trying to replicate from a SQL Server 2008 database to Oracle database, but when trying to start the extract process we are getting the following error message:
OGG-00868 Supplemental logging is disabled for database 'GoldenGate'. To enable logging, perform the following: 1) Set 'trunc. log on chkpt.' to false. 2) Create a full backup of the database. Please refer to the "Oracle GoldenGate For Windows and UNIX Administration Guide" for details.
I have read that for enabling the supplemental logging is enough to "add trandata table_name", and this is done, and the extract process we are using is the following:
EXTRACT cap_or4
SOURCEDB GoldenGate
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
EXTTRAIL c:\GoldenGate\V28983-01-GG-111112-SQLServer-Windows-x64\dirdat\C4
TABLE GoldenGate.dbo.DES_T1;
And the 'trunc.log on chkpt' is set to false.
We don’t know what else to do, or to check... does anyone have any idea?!
Thank you very much, best regards,
Araitz.-Have you followed all the process for installing as per the guide? clearly you missed something
Please follow below steps.
Installation & Configuration of Oracle GoldenGate for MS SQL Server:
Pre-requisites:
1.Change Data Capture (CDC) must be enabled for Oracle GoldenGate and will be enabled by Oracle GoldenGate by means of the ADD TRANDATA command.
2.SQL Server source database must be set to use the full recovery model.
3.Oracle GoldenGate does not support system databases.
4.After the source database is set to full recovery, a full database backup must be taken.
5.SQL Server 2008 ODBC/OLE DB: SQL Server Native Client 10.0 driver
6.Oracle GoldenGate processes can use either Windows Authentication or SQL Server Authentication to connect to a database.
7.Before installing Oracle GoldenGate on a Windows system, install and configure the Microsoft Visual C ++ 2005 SP1 Redistributable Package. Make certain it
is the SP1 version of this package, and make certain to get the correct bit version for your server. This package installs runtime components of Visual C++
Libraries. For more information, and to download this package, go to http://www.microsoft.com.
Privileges:
1.Required SQL Server privileges for Manager when using Windows authentication
Extract(source system)
BUILTIN\Administrators account must be a member of the SQL Server fixed server role System Administrators.
Account must be a member of the SQL Server fixed server role System Administrators
Replicat (target system)
BUILTIN\Administrators account must be at least a member of the db_owner fixed database role of the target database.
Account must be at least a member of the db_owner fixed database role of the target database.
2.Required SQL Server privileges for Extract and Replicat when using SQL Server authentication
Extract - Member of the SQL Server fixed server role System Administrators.
Replicat - At least a member of the db_owner fixed database role of the target database.
Downloading Oracle GoldenGate
Download the appropriate Oracle GoldenGate build to each system that will be part of the Oracle GoldenGate configuration.
1. Navigate to http://edelivery.oracle.com.
2. On the Welcome page:
--Select your language.
--Click Continue.
3. On the Export Validation page:
--Enter your identification information.
--Accept the Trial License Agreement (even if you have a permanent license).
--Accept the Export Restrictions.
--Click Continue.
4. On the Media Pack Search page:
--Select the Oracle Fusion Middleware Product Pack.
--Select the platform on which you will be installing the software.
--Click Go.
5. In the Results List:
--Select the Oracle GoldenGate Media Pack that you want.
--Click Continue.
6. On the Download page:
--Click Download for each component that you want. Follow the automatic download
process to transfer the mediapack.zip file to your system.
Installing the Oracle GoldenGate files
1. Unzip the downloaded file(s) by using WinZip or an equivalent compression product.
2. Move the files in binary mode to a folder on the drive where you want to install Oracle GoldenGate. Do not install Oracle GoldenGate into a folder that contains spaces in its name, even if the path is in quotes. For example:
C:\“Oracle GoldenGate” is not valid.
C:\Oracle_GoldenGate is valid.
3. From the Oracle GoldenGate folder, run the GGSCI program.
4. In GGSCI, issue the following command to create the Oracle GoldenGate working
directories.
CREATE SUBDIRS
a.Create the necessary working directories for GG.
Source DB:
GGSCI>create subdirs
Target DB:
GGSCI>create subdirs
Install the GoldenGate Manager process
1.Create a GLOBALS parameter file
--Execute the following commands from the <install location>.
GGSCI> EDIT PARAMS ./GLOBALS
--In the text editor, type the following:
MGRSERVNAME <mgr service>
Using a GLOBALS file in each GoldenGate instance allows you to run multiple Managers as services on Windows. When the service is installed, the Manager name
is referenced in GLOBALS, and this name will appear in the Windows Services control panel.
Note! Check to ensure that the GLOBALS file has been added in the GoldenGate installation directory and that it does not have an extension.
--Execute the following command to exit GGSCI.
GGSCI> EXIT
2. Install the Manager service
Execute the following command to run GoldenGate’s INSTALL.EXE . This executable installs Manager as a Windows service and adds GoldenGate events to the
Windows Event Viewer.
Shell> INSTALL ADDSERVICE ADDEVENTS
Note: Adding the Manager as a service is an optional step used when there are multiple environments on the same system or when you want to control the name
of the manager for any reason.
Configuring an ODBC connection
A DSN stores information about how to connect to a SQL Server database through ODBC (Open Database Connectivity). Create a DSN on each SQL Server source
and target system.
NOTE: Replicat will always use ODBC to query the target database for metadata.
To create a SQL Server DSN
1. Run one of the following ODBC clients:
--If using a 32-bit version of Oracle GoldenGate on a 64-bit system, create the DSN by running the ODBCAD32.EXE client from the %SystemRoot%\SysWOW64
folder.
--If using a 64-bit version of Oracle GoldenGate on a 64-bit system, create a DSN by running the default ODBCAD32.EXE client in Control Panel>Administrative
Tools>Data Sources (ODBC).
--If using a version of Oracle GoldenGate other than the preceding, use the default ODBC client in Control Panel>Administrative Tools>Data Sources (ODBC).
2. In the ODBC Data Source Administrator dialog box of the ODBC client, select the System DSN tab, and then click Add.
3. Under Create New Data Source, select the correct SQL Server driver as follows:
--SQL Server 2000: SQL Server driver
--SQL Server 2005: SQL Native Client driver
--SQL Server 2008: SQL Server Native Client 10.0 driver
4. Click Finish. The Create a New Data Source to SQL Server wizard is displayed.
5. Supply the following:
--Name: Can be of your choosing. In a Windows cluster, use one name across all nodes in the cluster.
--Server: Select the SQL Server instance name.
6. Click Next.
7. For login authentication, select With Windows NT authentication using the network login ID for Oracle GoldenGate to use Windows authentication, or select
With SQL Server authentication using a login ID and password entered by the user for Oracle GoldenGate to use database credentials. Supply login information
if selecting SQL Server authentication.
8. Click Next.
9. If the default database is not set to the one that Oracle GoldenGate will connect to,
click Change the default database to, and then select the correct name. Set the other
settings to use ANSI.
10. Click Next.
11. Leave the next page set to the defaults.
12. Click Finish.
13. Click Test Data Source to test the connection.
14. Close the confirmation box and the Create a New Data Source box.
15. Repeat this procedure from step 1 on each SQL Server source and target system.
Setting the database to full recovery model
Oracle GoldenGate requires a SQL Server source database to be set to the full recovery model.
To verify or set the recovery model
1. Connect to the SQL Server instance with either Enterprise Manager for SQL Server 2000 or SQL Server Management Studio for SQL Server 2005 and 2008.
2. Expand the Databases folder.
3. Right-click the source database, and then select Properties.
4. Select the Options tab.
5. Under Recovery, set Model to Full if not already.
6. If the database was in Simple recovery or never had a Full database backup, take a Fulldatabase backup before starting Extract.
7. Click OK.
Enabling supplemental logging
These instructions apply to new installations of Oracle GoldenGate for all supported SQL Server versions. You will enable supplemental logging with the ADD
TRANDATA command so that Extract can capture the information that is required to reconstruct SQL operations on the target. This is more information than
what SQL Server logs by default.
--SQL Server 2005 updated to CU6 for SP2 or later: ADD TRANDATA calls the sys.sp_extended_logging stored procedure.
--SQL Server 2005 pre-CU6 for SP2: ADD TRANDATA creates the following:
A replication publication named [<source database name>]: GoldenGate<source database name> Publisher. To view this publication, look under Replication>Local
Publications in SQL Server Management Studio. This procedure adds the specified table to the publication as an article.
A SQL Server Log Reader Agent job for the publication. This job cannot run concurrently with an Extract process in this configuration.
--SQL Server 2008: ADD TRANDATA enables Change Data Capture (CDC) and creates a minimal Change Data Capture on the specified table.
a.Oracle GoldenGate does not use the CDC tables other than as necessary to enablesupplemental logging.
b.As part of enabling CDC, SQL Server creates two jobs per database: <dbname>_capture and <dbname>_cleanup. The <dbname>_capture job adjusts the secondary
truncation point and captures data from the log to store in the CDC
tables. The <dbname>_cleanup job ages and deletes data captured by CDC.
c.Using the TRANLOGOPTIONS parameter with the MANAGESECONDARYTRUNCATIONPOINT option for Extract removes the <dbname_capture> job, preventing the overhead of
the job loading the CDC tables.
d.The alternative (using TRANLOGOPTIONS with NOMANAGESECONDARYTRUNCATIONPOINT) requires the SQL Server Agent to be running and requires the <dbname>_capture and <dbname>_cleanup jobs to be retained. You will probably need to adjust the <dbname>_cleanup data retention period if the default of three days is not acceptable for storage concerns.
To enable supplemental logging
1. On the source system, run GGSCI.
2. Log into the database from GGSCI.
DBLOGIN SOURCEDB <DSN>[, USERID <user>, PASSWORD <password>]
Where:
-- SOURCEDB <DSN> is the name of the SQL Server data source.
-- USERID <user> is the Extract login and PASSWORD <password> is the password that is required if Extract uses SQL Server authentication.
3. In GGSCI, issue the following command for each table that is, or will be, in the Extract configuration. You can use a wildcard to specify multiple table
names, but not owner names.
ADD TRANDATA <owner>.<table>
NOTE:The Log Reader Agent job cannot run concurrently with the GoldenGate Extract process.
4.Configuration
a.Create and start manager on the source and the destination.
Source DB:
shell>ggsci
GGSCI> edit params mgr
PORT 7809
DYNAMICPORTLIST 7900-7950
DYNAMICPORTREASSIGNDELAY 5
AUTOSTART ER *
AUTORESTART ER *, RETRIES 3, WAITMINUTES 5, RESETMINUTES 30
LAGCRITICALMINUTES 60
LAGREPORTMINUTES 30
PURGEOLDEXTRACTS c:\ogg\dirdat\T*, USECHECKPOINTS, MINKEEPFILES 10
GGSCI> start manager
GGSCI>info all
b. Create the extract group on the source side:
GGSCI> edit params EXT1
Add the following lines to the new parameter file
EXTRACT EXT1
SOURCEDB <DSN>, USERID ogg, PASSWORD ogg@321!
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
EXTTRAIL c:\ogg\dirdat\T1
DISCARDFILE c:\ogg\dirrpt\EXT1.DSC, PURGE, MEGABYTES 100
TABLE dbo.TCUSTMER;
TABLE dbo.TCUSTORD;
GGSCI>ADD EXTRACT EXT1, TRANLOG, BEGIN NOW
GGSCI>ADD EXTTRAIL c:\ogg\dirdat\T1, EXTRACT EXT1, MEGABYTES 100
GGSCI> edit params PMP1
Add the following lines to the new parameter file
EXTRACT PMP1
SOURCEDB <DSN>, USERID ogg, PASSWORD ogg@321!
PASSTHRU
RMTHOST dr, MGRPORT 7810
RMTTRAIL c:\ogg\dirdat\P1
TABLE dbo.TCUSTMER;
TABLE dbo.TCUSTORD;
GGSCI> ADD EXTRACT PMP1, EXTTRAILSOURCE c:\ogg\dirdat\T1
GGSCI> ADD EXTTRAIL c:\ogg\dirdat\P1, EXTRACT PMP1, MEGABYTES 100
Target DB:
===========
shell>ggsci
GGSCI> edit params mgr
PORT 7810
AUTOSTART ER *
AUTORESTART ER *, RETRIES 3, WAITMINUTES 5, RESETMINUTES 30
LAGCRITICALMINUTES 60
LAGREPORTMINUTES 30
PURGEOLDEXTRACTS c:\ogg\dirdat\P*, USECHECKPOINTS, MINKEEPFILES 10
GGSCI> start manager
GGSCI>info all
Create parameter file for replicat:
GGSCI> edit params REP1
REPLICAT REP1
ASSUMETARGETDEFS
TARGETDB <dsn>, USERID ogg@DR, PASSWORD ogg@321!
DISCARDFILE c:\ogg\dirrpt\REP1.DSC, append, megabytes 100
HANDLECOLLISIONS
ASSUMETARGETDEFS
MAP dbo.TCUSTMER, TARGET dbo.TCUSTMER;
MAP dbo.TCUSTORD, TARGET dbo.TCUSTORD;
GGSCI>ADD REPLICAT REP1, RMTTRAIL c:\ogg\dirdat\P1, nodbcheckpoint
# Start extract and replicat:
Source:
GGSCI> start er *
Destination:
GGSCI> start er *Greetings,
N K -
Oracle8i to SQL Server Connectivity Errors
I am having following error messages while setting up the ODBC connectivity between Oracle8i and SQL Server 7. I want to access SQL Server 7 tables from within Oracle8i. I have followed all the instruction of Oracle Generic Connectity document and have tested ODBC connection with ODBCPING as well as with TNSPING, these shows correct connectivity. I have also created Database Link within Oracle8i for SQL Server. After that when I access the SQL Server table from within Oracle I get the following error message.
ORA-12500: TNS:listener failed to start a dedicated server process
Could any body suggestion the solution please.
Thanks and regards,
Ghulam MallahFollowing is the tnsnames.ora
SPSLME =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 9adwea)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = SPSLME)
FDMSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 9adwea)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = FDMSQL)
(HS = OK)
9adwea is the name of host while FDMSQL is the DSN.
Following is the listener.ora file.
# LISTENER.ORA Network Configuration File: C:\oracle\ora81\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 9adwea)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = SPSLME)
(ORACLE_HOME = C:\oracle\ora81)
(SID_NAME = SPSLME)
(SID_DESC =
(GLOBAL_DBNAME = FDMSQL)
(ORACLE_HOME = C:\oracle\ora81)
(SID_NAME = FDMSQL)
While in oracle\ora81\hs\admin folder following are the names of files
1. initfdmsql.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = FDMSQL
HS_FDS_TRACE_LEVEL = ON
# Environment variables required for the non-Oracle system
set odbcini=C:\WINNT\odbc.ini
LISTENER.ORA is :
# This is a sample listener.ora that contains the NET8 parameters that are
# needed to connect to an ODBC Agent
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=9adwea)(port=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=FDMSQL)
(ORACLE_HOME=/private/app/oracle/product/8.1.6)
(PROGRAM=FDMSQL)
CONNECT_TIMEOUT_LISTENER = 0
TNSNAME.ORA is the following:
# This is a sample tnsnames.ora that contains the NET8 parameters that are
# needed to connect to an ODBC Agent
FDMSQL = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=9adwea)(PORT=1521))
(CONNECT_DATA=(SID=FDMSQL))
Best regards,
Ghulam Mallah -
DEAR SQL EXPERT TEAM
( an error has occurred while establishing a connection) when i am connecting a system through a client system it is getting an error message code 26
regards
s hemanth kumartry these below . copied it from this link :
http://www.codeproject.com/Articles/709049/Solution-Error-Error-Locating-Server-Instance-S
Below are the most common issues due to which we get this error:
Check the Server name – First and the most common thing to check is to ensure there are no typo errors for the server name.
Accessibility to Server – The server should also be accessible from the network computer, we are trying to access SQL Server.
Check the Instance name – Once the server is checked for correctness, the next thing to check is the SQL Server instance name. Check for typo errors in the Instance name and also ensure that the Instance exists
on the server
Remote Connections enabled on SQL Server – Ensure SQL Server is allowed for remote connections
Mixed Mode Authentication Enabled – Ensure Mixed-mode authentication is enabled on SQL Server you are trying to connect to
SQL Browser Service should be running – On the server, SQL browser service should be running. You can check this from Services window on the server.
Firewall is configured on server to allow sqlbrowser.exe and port 1434 under exception.
these might help as well
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
http://stackoverflow.com/questions/13754563/sql-network-interfaces-error-26-error-locating-server-instance-specified
Hope it Helps!! -
I am receiving the following error when attempting to open a SQL Server connection in a C# console application: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was
not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) SQL Error"
1) my coworker built the project on his machine (same code) and the project works - no errors
2) I used the identical connectionstring (same code for that matter) in a server app vs. console app - no errors
3) I built the connection using project properties/settings (Properties.Settings.Default) - test the connection on the Connection Properties window - "Test connection succeeded." Use the connection in my project to open a connection -
receive error.
4) ping to server - no errors
5) I used PL/SQL developer to connect to server using same connection information - no errors
6) I installed Visual Studio 2013, built the project - receive error
I am stuck at this point. Can anyone help?
Thank-you,
Barbara VelascoHi Barbara,
Firstly, please make sure that the SQL Server Services are running. Other reasons could be incorrect connection string, firewall block the connection and so on. Please refer to the following article to troubleshoot this issue:
http://stopdebugging.wordpress.com/2013/12/16/error-unable-to-connect-to-the-database-a-network-related-or-instance-specific-error-occurred-while-establishing-a-connection-to-sql-server/
In addition, here are some good articles regarding troubleshoot SQL Server connectivity:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified:
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
http://www.aspsnippets.com/Articles/Exception---error-26---Error-Locating-Server-Instance-Specified.aspx
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
BI to SQL Server Conncetion Errors
Hi,
We are getting an RFC Connection error like "ERROR: Program
MSSAPBI_PROG not registered" while connecting to SQL Server as per the below link.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ea8832-59ac-2d10-ceae-87ee8d1f8da4?quicklink=index&overridelayout=true]
RFC Connection test Erros in SM59:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program MSSAPBI_PROG not registered
Error Details LOCATION: SAP-Gateway on host HIMDEVBIW.himalaya.ac / sapgw00
Error Details DETAIL: TP MSSAPBI_PROG not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 4054
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1871
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Sep 09 13:59:48 2011
Error Details VERSION: 2
DTP Monitor got the following errors for that request.
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system MSSAPBI.
Message no. RSBO523
Error when opening an RFC connection
Message no. RSBO899
Error while updating to target ZSTCK_CAT (type Open Hub Destination)
Message no. RSBK241
Operation could not be carried out for
Message no. RS_EXCEPTION120
Exception CX_RS_FAILED logged
Message no. RSBK228
We tried to register the program in BI server as per below link with command but it was not showing anything in SMGW
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
Error 'Program not registered' while testing RFC
If anybody face this issue , request you to reply ASAP.
Best Regards,
SGHi SG & Federico,
Kindly have a look at below note,
For error message: RSBO899
1497204 P25: DTP: Open hub confirmation does not always work
Symptom:
The confirmation of a third-party tool that has generated an open hub
data transfer process (DTP) request does not always work if the
third-party tool calls the function module
RSB_API_OHS_REQUEST_SETSTATUS.
Hope this helps.
Regards,
Mani -
SQL Server 2005 Error Message - when Right Clicking a DB Properties
Hi
We are running SQL Server 2005 SP03, we have x15 databases (excluding SBO-COMMON, RSP, Coresuite), all x15 databases have Maintenance Plans setup, tasks ticked:
- Shrink Database
- Clean Up History
- Back up Database (Full)
- Maintenance Clean-up task
These Maintenance Plans have been running for over 5 months now, we have recently changed our VMware Virtual Server over to a Hosted VMware Virtual Server, now when I right click on a certain database and select "Properties" I get the following error message with SQL Server:
Property Owner is not available for Database '[Turquoise_Moon_Live]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
Could the Maintenance Plan be preventing me to run the Properties against a relevant DB (I have tested this by restoring a DB that doe not have a Maintenance Plan and the Properties works, tested this on SBO-COMMON and it works as well)
Can anyone agree with me or let me know what else might be the issue as I have checked the Server Roles & the Users Credentials for SQL and all seems well.
Regards
Kurt WaltersHi Gordon
This solution did not work, but I needed to delete the Maintenance Plans anyway to set it for 1 month instead of 2 Months. I am thinking as we have changed Domains, were the last one was IS Domain and the new one is Hosted Domain, the security issues are probably coming from this (as I am able to access the Properties of the IS Domain SQL Server even with the Maintenance Plans running).
Any thoughts on correcting this as we have changed Domains? (I have created a user as HOSTED\example, the old one was IS\example)
Regards
Kurt Walters -
SQL Server monitoring error event log 4001
hello Experts ,
We have SCOM 2012 R2 environment ,I have installed SQL SERVER MPs 6.5.0.1 and installed SCOM agent on some of SQL Server. Some of the SQL Server are monitoring working properly not all SQL Server but getting error for some of SQL Server in event log
Event :4001
Management Group: SCOMMgtGroup. Script: Main Module: CPUUsagePercentDataSource.ps1 :
Computer Name = 'MHSSCOM01.memnet.org' WMI = 'ComputerManagement11' Service Name = 'MSSQLSERVER' SQL Instance Name = 'MSSQLSERVER'
Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."Error occured during CPU Usage for SQL Instances data source executing.
Computer:MHSSCOM01
Reason: Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."
also not getting Database information within the SQL Server instances for these SQL Server within "Instances Summary "
for resolution ,I have created a Run as account (windows)for SQL monitoring then associated it with Run as profile with SQL Server default account,Discovery account and Monitoring account and distribute it securely to each SQL Server health service object
.The run as account have added to local admin group on each SQL server.
How to resolved the event log error and how to get database information for all instances of sql server.
Thanks
RICHAHi,
It seems like that the action account that run the script does not have enough permissions on the monitored SQL server, I would like to suggest you follow the below link to check your runas account configuration:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
And make sure the action account also have SQL admin account to the SQL server.
Here is also a link that may be helpful for you:
http://blogs.technet.com/b/momteam/archive/2014/05/12/kb-event-4001-in-the-operations-manager-log-during-sql-server-2012-monitoring.aspx
Regards,
Yan Li
Regards, Yan Li
Maybe you are looking for
-
My Office 2007 Word Files are all corrupted. Can't open any of them.
I can create and open new 2007 Word files. However, all my files prior to 10/27/2014 cannot be opened. I get a corrupted message. Says the file cannot be open because there are problems with the content. Then asks me if I want to recover the cont
-
Error opening a business component view object - ExtendedTextArea missing
Hi, I'm running the HRSystem demo from the oracle developer day, and get an error opening any business component view object, for example, JobsView.xml. The error is: oracle.classloader.util.AnnotatedNoClassDefFoundError: Missing class: oracle.j
-
iBook can't be downloaded onto a device that doesn't already have it? Can't even find it in the App Store. And on my phone that does have it, all the books say "no longer available."
-
IPod 80 GB stuck after disconnecting
I just bought two iPod's 80 GB for my daughters. The first one I synchronised flawlessly with my iTunes library, although it took 12 hours with the USB-connection to load the some 9,000 songs. The second one started the synchronisation process, when
-
REGARDING PROCESS ORDER CREATION
Hi All, While creating the process order for material, system showing the message that "Manual process order cannot be created for this product". But if we try with another user id, i could able to create the order for the same material. Plz suggest