SQL30082N Security processing failed with reason "15" (PROCESSING FAILURE)

Hi all.
I'm managing the following error during a system copy:
<b>SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001</b>
Inside the db2diag.log, i have the following message:
<b>2007-10-15-16.44.56.793439+120 I718413554A270 LEVEL: Warning
PID : 483450 TID : 1
FUNCTION: DB2 Common, Security, Users and Groups, secLogMessage, probe:20
DATA #1 : String, 64 bytes
Password validation for user sapr3 failed with rc = -2146500315</b>
Can anyone help?
Thanks and regards,
Marco.

Hi,
check if the files
$INSTHOME/sqllib/security/db2c?pw
have the correct permissions. They need a SUID bit to root.
If the SUID bit is not set, you can do a
<db2_install_dir>/instance/db2iupdt db2<dbname>
as user root to update your DB2 instance. This will set the permissions correctly.
Regards
Frank

Similar Messages

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

Security API failed with error 60008

HI, I have been tryng to wrap some files (or something like that) but when I select the files it comes up with an error box saying "security API failed with error 60008" can anyone help me fix this or tell me what it is?

Launch Disk Utility and run Repair Permissions on the startup volume. Try whatever you were doing again. If there's no change, continue as follows.
Triple-click the line below to select it:
/private/tmp
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*

REP-56071: Security check failed with error message

Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras Weintrauth

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

Trying to assign Security Baseline fails with error 24001

We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
We have followed the steps here
http://technet.microsoft.com/en-us/library/gg675110.aspx
But the job to assign the baseline fails with the following:-
Error 24001
Update server operation failed with error: The specified item could not be found in the database.
We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2

Remove wsus from VMM and add it again.
This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem.

Xml disassembler failing with reason start element does not match end element

Hi,
I'am using a WCF-WSHttp adapter to send a very simple message to a WCF service from BizTalk. The service can return a response or throw a BusinessFault or a SystemFault.
I get the responses and faults returned and captured most part of the time . But one in a hundred message fails with the below error when a BusinessFault or a SystemFault is thrown . They are SOAP faults
There was a failure executing the response(receive) pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler"
Send Port: "xy.Integration.customapplication.CustomService" URI: "https://xyz.xyz.co.xy/CustomService/CustomService.svc" Reason: Start element
'nz/Faults/201' does not match end element 'Reason'.
Line 1, position 677.
I use the below Xpath for the Inbound BizTalk Message Body
/*[local-name()='Fault']/*[local-name()='Detail' or local-name()='detail']/* | /*[not(local-name()='Fault')]
My node encoding is Xml.
I have enabled the Service Trace on the Biztalk server to capture the incoming message and noticed that the messages are not broken .
Beleive this is one of the item that Microsoft has fixed for BizTalk 2009 in CU 1. But I couldnt notice a similar one for BizTalk 2010
http://support2.microsoft.com/kb/981422
Any tips would be very much appreciated.
Thanks
Suresh

Could you post the XML message where this error occurs here please?
Because that error usually occurs when you receive invalid XML.
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Rejection of PO item with reason 06 - IDoc failure

Hi,
There is an IDoc failure with message: Rejection of PO item with reason 06.
The user(supplier) wants to reject first line item of the Subcontracting PO and add a new line item instead with the right data.
Please suggest.
Regards,
Akash Prekar

Hi Dirk,
You can actually use the BADI BBP_CREATE_PO_BACK to change the flag value before filling the PO Craetion BAPI interface parameters
Sangeeta

JWSDP 1.6 xws-security Simple fails with "block not properly padded"

Environment:
- Windows 2000
- Tomcat50-jwsdp
- JAVA_HOME=C:/Progra~1/Java/jdk1.5.0_05
- Security environment handler: SecurityEnvironmentHandler.java supplied with JWSDP 1.6 (Hello, Ron!)
I get the following in the Tomcat Window:
==== Received Message End ====
Nov 13, 2005 10:38:56 AM com.sun.org.apache.xml.internal.security.encryption.XMLCipher decryptKey
INFO: Decryption of key type http://www.w3.org/2001/04/xmlenc#tripledes-cbc OK
Nov 13, 2005 10:38:56 AM com.sun.xml.wss.impl.apachecrypto.DecryptionProcessor decryptElementWithCipher
SEVERE: WSS_ENC0004: Exception [ Given final block not properly padded ] while trying to decrypt message
Nov 13, 2005 10:38:56 AM com.sun.xml.wss.impl.filter.DumpFilter process
INFO: ==== Sending Message Start ====
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:enc="http://schemas.xmlsoap.org/soap/enco
ding/" xmlns:ns0="http://xmlsoap.org/Ping" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.or
g/2001/XMLSchema-instance">
<env:Body>
<env:Fault>
<faultcode xmlns:ans1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">ans1:Fail
edCheck</faultcode>
<faultstring>Unable to decrypt message</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
==== Sending Message End ====
Please help!
George

Hi, I got the xws-security/samples/simple application
working successfully with my own keystores. I have 2
questions regarding this sample application.
1) When running the application with the
encrypt-server.xml and encrypt-client.xml
configuration, why is it necessary to import the
client's certificate into the server's truststore and
the server's certificate into client's truststore when
their certificates have already been signed by a
trusted root CA (e.g. Verisign), whose certificate is
in both truststores? Shouldn't their certificates
containing their public keys get automatically
exchanged during the connection request? It's a pain
to publish a web service and expect a manual public
certificate import for each client wanting to use the
service.Certificates are sent only when the keyReferenceType is "Direct" which is the default. It's possible that our code is checking the certificate sent with one found in the KeyStore, but a quick scan of the code doesn't show it. If that's what's happening it's a bug. All of the other key reference strategies send only a referece to the sender's certificate in which case the reciever must have a copy of that certificate in its keystore.
2) I use Tomcat to run the sample application and did
set up the SSL connector to point to the keystores.
When the client connects to the server, it uses a
http endpoint not https. I'm aware that htpps is
needed for SSL support but not clear on where does
https come into play during the client's
request/server's response process.We share the SSL keystore so that certificates don't have to be stored in more than one place. The functionality of XWS-Security and SSL is logically the same so it make sense to use the same keystore. XWS-Security operates completely separately from the transport and never knows whether HTTPS is in use or not.
Phil Goodwin
Technical Lead
XWS-Security

SOA WS-Security propagate fails with BPELConsole

Hello,
I've created a simple BPEL flow that calls EnterpriseOne web service via partner link. I would like to pass ws-security headers to it and hence set properties (wsseHeaders with the value propagate and another named wsseOASIS2004Compliant with value true).
When I execute the BPEL flow via BPELConsole, I'm setting the WS-Security headers but the partnerlink fails to get the ws-security header. Instead I receive error back as "Missing <wsse:Security> in SOAP Header".
If I set wsseHeaders to credential and hard code user/password for the partner link, everything works.
Any thoughts on how to resolve this?
Thanks...

appaerently with the switch to the oc4j ws providers - a regression was introduced - bug 5665917 ... which is to be fixed for 10.1.3.3 ..
pls contact oracle support to retrieve the patch ..
/clemens

Visa security verification fails with Firefox, but ok with Internet Explorer.

When I use either Visa or Mastercard for online shopping on Firefox, when I submit the security verification (Verified by Visa) the screen freezes. I tested it by using the wrong security info and I got a response to say that it was wrong, but when I entered the correct info, it froze. I have tried different cards, as has my wife, and the same happens. Fortunately the payment doesn't go through.
There is no problem when we use Internet Explorer or on sites where verification is not requested.

I get that warning on both Fx26 and IE8, searching on google.com and google.com.au. My query was:
https://www.google.com/search?q=site%3Athedepression.org.au
For assistance with this message, try Google's support here:
* [https://support.google.com/webmasters/answer/163633 About malware and hacked sites - Webmaster Tools Help]
* http://productforums.google.com/forum/#!categories/webmasters/malware--hacked-sites

Sleekbook 6 Recovery fails with P2PP burnboot check failure

I have an HP Sleekbook 6-1019nr laptop.  I just purchased System Restore media for this notebook. The system originally came with Win 7 Home. I received the restore media, connected the device to an External USB DVD drive to the unit and started the restore Process. No errors were found until the very end and then i got a message indicating the restore failed and would like to review the log.
I am posting the log for reference. i have seen other indicate in the forms to change the BIOS clock to 2012 to resolve this issue and reimage, which i have tried but the error persists.
The only error I can see is the wallpaper failed to load...I don't see any other failures in the log but maybe I am not seeing another error.
Looking for some assistance. I can provide additional details but I am stuck as to my next step. If the media is the issue, i want to get it reported to HP.
P2PP BurnBoot Check Failed
Possible Causes:
1. Yellow-Bang occured at Device Manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found Memory Dump file
Suggestion:
   1. Checking REGDEV_BB.LOG for drivers
   2. Checking BBApps.log for applications
   3. Checking MEMDUMP_BBV.log for memory dump file
Note(for ODM):
   If you know which component failed in preinstall process
      after checking above files, please OTS it to the component owner.
   Otherwise, suggest to contact TWN PDC NB-PreinPM or create PIN-Log and OTS it with OTS Category Image
[RegistryDevicesCheck]
Result=PASSED
[PININST_BBV]
PININST (Mini-FBI) starts at: 20:38:48 Sunday, December 14, 2014
[RunOnceThese_CMD#1]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\WMIWirelessOn.exe"
START=> 20:38:50 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:39:05 Sunday, December 14, 2014
RESULT=> Command finished in 15 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "c:\SwSetup\ocamrk\ocamrk.cmd"
START=> 20:39:05 Sunday, December 14, 2014
END=> 20:39:07 Sunday, December 14, 2014
RESULT=> Command finished in 2 seconds.
>==============================================================================
[RunOnceThese_CMD#3]
LAUNCHED=> "CMD.exe /c MOVE c:\System.sav\FactoryUpdate\boot.wim c:\System.sav\2ndCap"
START=> 20:39:07 Sunday, December 14, 2014
END=> 20:39:07 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#4]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"
START=> 20:39:07 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:39:25 Sunday, December 14, 2014
RESULT=> Command finished in 18 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "CMD.exe /C C:\System.sav\Util\TDCTWKs\ChangeVol.cmd"
START=> 20:39:27 Sunday, December 14, 2014
END=> 20:39:28 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VGA_A_BBV.CMD"
START=> 20:39:28 Sunday, December 14, 2014
END=> 20:41:21 Sunday, December 14, 2014
RESULT=> Command finished in 113 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\LAN_BBV.CMD"
START=> 20:41:21 Sunday, December 14, 2014
END=> 20:42:29 Sunday, December 14, 2014
RESULT=> Command finished in 68 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Audio_BBV.CMD"
START=> 20:42:29 Sunday, December 14, 2014
END=> 20:45:13 Sunday, December 14, 2014
RESULT=> Command finished in 164 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Cardreader_BBV.CMD"
START=> 20:45:13 Sunday, December 14, 2014
END=> 20:45:24 Sunday, December 14, 2014
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TouchPad_BBV.CMD"
START=> 20:45:24 Sunday, December 14, 2014
END=> 20:45:56 Sunday, December 14, 2014
RESULT=> Command finished in 32 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\WMIDetectTest2.bat"
START=> 20:45:56 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:45:57 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\TDCWIDI_BBV.CMD"
START=> 20:45:57 Sunday, December 14, 2014
END=> 20:45:58 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_B_BBV.CMD"
START=> 20:45:58 Sunday, December 14, 2014
END=> 20:47:08 Sunday, December 14, 2014
RESULT=> Command finished in 70 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_A_BBV.CMD"
START=> 20:47:08 Sunday, December 14, 2014
END=> 20:47:08 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "cscript.exe c:\SwSetup\powerset\sys_mem_check.vbs"
START=> 20:47:08 Sunday, December 14, 2014
END=> 20:47:08 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BCBT4_BBV.CMD"
START=> 20:47:08 Sunday, December 14, 2014
END=> 20:48:25 Sunday, December 14, 2014
RESULT=> Command finished in 77 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPDGF_BBV.CMD"
START=> 20:48:25 Sunday, December 14, 2014
END=> 20:48:37 Sunday, December 14, 2014
RESULT=> Command finished in 12 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "c:\System.sav\Util\InstallEFIBits.cmd"
START=> 20:48:37 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:48:42 Sunday, December 14, 2014
RESULT=> Command finished in 5 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "cmd.exe /c C:\System.sav\Util\TDC\OOBE\CompName.cmd"
START=> 20:48:42 Sunday, December 14, 2014
END=> 20:48:43 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\ARBH40_BBV.CMD"
START=> 20:48:43 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:48:43 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQL_BBV.CMD"
START=> 20:48:43 Sunday, December 14, 2014
END=> 20:48:43 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\VPC_QFE.cmd"
START=> 20:48:43 Sunday, December 14, 2014
END=> 20:48:43 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IE9_BBV.CMD"
START=> 20:48:43 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:48:44 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "CMD.exe /c C:\System.sav\bbv\QFEList32.cmd"
START=> 20:48:44 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:48:49 Sunday, December 14, 2014
RESULT=> Command finished in 5 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\SWSetup\ESUW7\ESURun.bat"
START=> 20:48:49 Sunday, December 14, 2014
END=> 20:49:01 Sunday, December 14, 2014
RESULT=> Command finished in 12 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 20:49:01 Sunday, December 14, 2014
END=> 20:49:01 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 20:49:04 Sunday, December 14, 2014
[Mini-FBI]
Result=PASSED
[PININST_BBV2]
PININST (Mini-FBI) starts at: 20:50:11 Sunday, December 14, 2014
[RunOnceThese_CMD#1]
LAUNCHED=> "C:\SYSTEM.SAV\UTIL\CLEANFBI.CMD"
START=> 20:50:13 Sunday, December 14, 2014
END=> 20:50:13 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "CMD.exe /c C:\System.sav\2ndCap\2ndCPrep.cmd"
START=> 20:50:13 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:50:17 Sunday, December 14, 2014
RESULT=> Command finished in 4 seconds.
>==============================================================================
[RunOnceThese_CMD#3]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD"
START=> 20:50:17 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:50:39 Sunday, December 14, 2014
RESULT=> Command finished in 22 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "C:\System.sav\Util\RemoveEFIBits.cmd"
START=> 20:50:41 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:50:41 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\OSEnhReg\SETUP.cmd"
START=> 20:50:41 Sunday, December 14, 2014
END=> 20:50:41 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "cscript.exe c:\System.sav\Util\webcam.vbs"
START=> 20:50:41 Sunday, December 14, 2014
END=> 20:50:42 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\SWSetup\ESUW7\ESUDelete.bat"
START=> 20:50:42 Sunday, December 14, 2014
END=> 20:50:42 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSecA_BBV.CMD"
START=> 20:50:42 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:50:42 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VUDU_BBV.CMD"
START=> 20:50:42 Sunday, December 14, 2014
END=> 20:50:42 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\URLOffer_bbv.CMD"
START=> 20:50:42 Sunday, December 14, 2014
END=> 20:51:10 Sunday, December 14, 2014
RESULT=> Command finished in 28 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BTBUS_BBV.CMD"
START=> 20:51:10 Sunday, December 14, 2014
END=> 20:51:12 Sunday, December 14, 2014
RESULT=> Command finished in 2 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEHome_BBV.CMD"
START=> 20:51:12 Sunday, December 14, 2014
END=> 20:51:13 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPPlus_BBV.CMD"
START=> 20:51:13 Sunday, December 14, 2014
END=> 20:51:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPOSD_BBV.CMD"
START=> 20:51:14 Sunday, December 14, 2014
END=> 20:51:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPMKT_BBV.CMD"
START=> 20:51:14 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:51:15 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPAA_BBV.CMD"
START=> 20:51:15 Sunday, December 14, 2014
END=> 20:51:15 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Ebay_bbv.CMD"
START=> 20:51:15 Sunday, December 14, 2014
END=> 20:51:17 Sunday, December 14, 2014
RESULT=> Command finished in 2 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Ceement_BBV.CMD"
START=> 20:51:17 Sunday, December 14, 2014
END=> 20:51:17 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\YouCam_BBV.CMD"
START=> 20:51:17 Sunday, December 14, 2014
END=> 20:54:13 Sunday, December 14, 2014
RESULT=> Command finished in 176 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WinLive_BBV.CMD"
START=> 20:54:13 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:54:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Snfish_BBV.CMD"
START=> 20:54:14 Sunday, December 14, 2014
END=> 20:54:16 Sunday, December 14, 2014
RESULT=> Command finished in 2 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Norton180_BBV.CMD"
START=> 20:54:16 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:54:16 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NorIS_DV_BBV.CMD"
START=> 20:54:16 Sunday, December 14, 2014
END=> 20:55:14 Sunday, December 14, 2014
RESULT=> Command finished in 58 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\LoJack_BBV.CMD"
START=> 20:55:14 Sunday, December 14, 2014
END=> 20:55:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RM4Win.CMD"
START=> 20:55:14 Sunday, December 14, 2014
END=> 20:55:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSWFK_bbv.cmd"
START=> 20:55:14 Sunday, December 14, 2014
END=> 20:55:14 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCOSE_bbv.cmd"
START=> 20:55:14 Sunday, December 14, 2014
END=> 20:55:15 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSPIP12_bbv.cmd"
START=> 20:55:15 Sunday, December 14, 2014
END=> 20:55:40 Sunday, December 14, 2014
RESULT=> Command finished in 25 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\hppm_bbv.CMD"
START=> 20:55:40 Sunday, December 14, 2014
END=> 20:56:04 Sunday, December 14, 2014
RESULT=> Command finished in 24 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPMroom_BBV.CMD"
START=> 20:56:04 Sunday, December 14, 2014
END=> 20:56:05 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPLB_BBV.CMD"
START=> 20:56:05 Sunday, December 14, 2014
END=> 20:56:12 Sunday, December 14, 2014
RESULT=> Command finished in 7 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPDOC_BBV.CMD"
START=> 20:56:12 Sunday, December 14, 2014
END=> 20:56:18 Sunday, December 14, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCM41_bbv.CMD"
START=> 20:56:18 Sunday, December 14, 2014
END=> 20:56:19 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\DVD2D3D_BBV.CMD"
START=> 20:56:19 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:56:27 Sunday, December 14, 2014
RESULT=> Command finished in 8 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Costco_BBV.CMD"
START=> 20:56:27 Sunday, December 14, 2014
END=> 20:56:28 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BIOS_BBV.CMD"
START=> 20:56:28 Sunday, December 14, 2014
END=> 20:56:48 Sunday, December 14, 2014
RESULT=> Command finished in 20 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\WallpaperInstallBOM.cmd"
START=> 20:56:48 Sunday, December 14, 2014
END=> 20:56:49 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#35]
LAUNCHED=> "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe"
START=> 20:56:49 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:56:49 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#36]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BBarIE9_BBV.CMD"
START=> 20:56:49 Sunday, December 14, 2014
END=> 20:57:05 Sunday, December 14, 2014
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#37]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\AFlash_BBV.CMD"
START=> 20:57:05 Sunday, December 14, 2014
END=> 20:57:05 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#38]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SymHPE_BBV.CMD"
START=> 20:57:05 Sunday, December 14, 2014
END=> 20:57:06 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#39]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HOSTEND.cmd"
START=> 20:57:06 Sunday, December 14, 2014
END=> 20:57:06 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#40]
LAUNCHED=> "cmd.exe /c c:\System.sav\Util\TDC\OOBE\BKG.cmd"
START=> 20:57:06 Sunday, December 14, 2014
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 20:57:07 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#41]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 20:57:07 Sunday, December 14, 2014
END=> 20:57:07 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#42]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSF_bbv.CMD"
START=> 20:57:07 Sunday, December 14, 2014
END=> 20:57:07 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#43]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCM41_REG.CMD"
START=> 20:57:07 Sunday, December 14, 2014
END=> 20:57:07 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#44]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\DTICON_BBV.CMD"
START=> 20:57:07 Sunday, December 14, 2014
END=> 20:57:10 Sunday, December 14, 2014
RESULT=> Command finished in 3 seconds.
>==============================================================================
[RunThese_CMD#45]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\STARTMENU_BBV.CMD"
START=> 20:57:10 Sunday, December 14, 2014
END=> 20:57:10 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#46]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\HOTSTART_BBV.CMD"
START=> 20:57:10 Sunday, December 14, 2014
END=> 20:57:10 Sunday, December 14, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 20:57:13 Sunday, December 14, 2014
[Mini-FBI]
Result=PASSED
[C:\System.sav\Logs\BB\AFLASH.log]
Result=PASSED
[C:\System.sav\Logs\BB\ARBH40.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Audio.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BBarIE9.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BCBT4.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BIOS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BKG_XML.log]
Result=PASSED
[C:\System.sav\Logs\BB\BTBHOST.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BTBUS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Cardreader.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Ceement.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CompName.log]
Result=PASSED
[C:\System.sav\Logs\BB\Costco.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DTICON_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DVD2D3D.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Ebay.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU_CTO.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU_Tweaks.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HOTSTART_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPAA.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCM41.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCM41_REG.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCOSE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPDGF.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPDOC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPLB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPMKT.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPMroom.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPOSD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPPlus.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\hppm.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPQL.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPSecA.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSF.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSPIP12.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSWFK.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IE9.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IEHome.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\LAN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\LoJack.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NorIS_DV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Norton180.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\OSEnhReg.log]
Result=PASSED
[C:\System.sav\Logs\BB\PureOSSR.log]
Result=PASSED
[C:\System.sav\Logs\BB\RM4Win.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Snfish.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\STARTMENU_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SymHPE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TDCWIDI.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TouchPad.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\URLOffer.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\VGA_A.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\VUDU.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WallpaperOk.log]
Log file...
Component: Wallpaper for Windows 7 - TDC
Timing: Pininst_BBV2Post
Error: Wallpaper installation failed, did not find ResultCode=0
RESULT=FAILED
Standard Error information...
Standard Out information...
Result=FAILED
[C:\System.sav\Logs\BB\WinLive.log]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_A.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_B.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WMIWirelessOn.log]
Result=PASSED
[C:\System.sav\Logs\BB\Youcam.log]
Result=PASSED
[LogFiles]
NumOfLogs=59.
[DumpFile]
Result=PASSED
[WinSAT]
Result=PASSED
[21:03:31.50] Sysprep_succeeded.tag does not exist ...
[21:03:31.50] ------------------------------------------------------------------------------------------
[21:03:31.50] BBVLast.cmd : [20x] CTOError.flg is detected at the end of BBV process...
[21:03:31.50] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[21:03:31.50] ------------------------------------------------------------------------------------------

Good Morning @CCStefanini ,
Welcome to the HP Forums!
It is a terrific place to find answers and ideas!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you tried to do the recovery from the recovery disks HP sent but received this error " P2PP BurnBoot Check Failed" .
You have tried changing the date in the bios but there was no change.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 7) that will guide you through some steps.
Here is a link to a search I did in the forum for your error that were resolved. You may wish to peruse these as they may have a suggestion that may help. P2PP BurnBoot Check Failed forum search
As HP did just send you the recovery kit, you may also contact them for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

CcmSetup failed with error code 0x80072ee7

How to resolve above issue?
I noticed that account its using is System but I have CP domain account setup with local admin access to that computer.
Here's the CCMLog:
==========[ ccmsetup started in process 1844 ]==========
ccmsetup 4/1/2013 6:55:53 PM
1848 (0x0738)
CcmSetup version: 5.0.7711.0000 ccmsetup
4/1/2013 6:55:53 PM 1848 (0x0738)
Running on OS (5.1.2600). Service Pack (3.0). SuiteMask = 256. Product Type = 1
ccmsetup 4/1/2013 6:55:53 PM
1848 (0x0738)
Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
SslState value: 224 ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
CCMHTTPPORT: 80 ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
CCMHTTPSPORT: 443 ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
CCMHTTPSSTATE: 224 ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
CCMHTTPSCERTNAME: ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
FSP: ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
CCMFIRSTCERT: 1 ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
Config file: C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
Retry time: 10 minute(s)
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
MSI log file: C:\WINDOWS\ccmsetup\client.msi.log
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
MSI properties: INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
Source List: ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
\\vCM-PRI.contoso.loc\SMSClient
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
\\VCM-PRI.CONTOSO.LOC\SMSClient
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
MPs: ccmsetup
4/1/2013 6:55:54 PM 1848 (0x0738)
vCM-PRI.contoso.loc
ccmsetup 4/1/2013 6:55:54 PM
1848 (0x0738)
No version of the client is currently detected.
ccmsetup 4/1/2013 6:55:56 PM
1848 (0x0738)
Updated security on object C:\WINDOWS\ccmsetup\.
ccmsetup 4/1/2013 6:55:58 PM
1848 (0x0738)
A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.
ccmsetup 4/1/2013 6:55:58 PM
1848 (0x0738)
Running as user "SYSTEM"
ccmsetup 4/1/2013 6:57:23 PM
284 (0x011C)
Detected 77336 MB free disk space on system drive.
ccmsetup 4/1/2013 6:57:23 PM
284 (0x011C)
Only one MP vCM-PRI.contoso.loc is specified. Use it.
ccmsetup 4/1/2013 6:57:23 PM
284 (0x011C)
Searching for DP locations from MP(s)... ccmsetup
4/1/2013 6:57:23 PM 284 (0x011C)
Current AD site of machine is Default-First-Site-Name
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
Local Machine is joined to an AD domain LocationServices
4/1/2013 6:57:23 PM 284 (0x011C)
Unable to retrieve AD forest + domain membership
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
DhcpGetOriginalSubnetMask entry point not supported.
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
Begin checking Alternate Network Configuration
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
Finished checking Alternate Network Configuration
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
Adapter {B34BA4D3-826D-487E-91DB-6BB818F8F61B} is DHCP enabled. Checking quarantine status.
LocationServices 4/1/2013 6:57:23 PM
284 (0x011C)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name=""/>
<Domain Name=""/>
<IPAddresses>
<IPAddress SubnetAddress="192.168.137.0" Address="192.168.137.50"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
4/1/2013 6:57:23 PM 284 (0x011C)
Sending message header '<Msg SchemaVersion="1.1"><ID>{EFA1E87D-54C2-49D0-A9BB-EA4F5113770D}</ID><SourceHost>VXP1</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VXP1:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>vCM-PRI.contoso.loc</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-04-01T22:57:23Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1018"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 4/1/2013 6:57:23 PM
284 (0x011C)
CCM_POST 'HTTP://vCM-PRI.contoso.loc/ccm_system/request'
ccmsetup 4/1/2013 6:57:23 PM
284 (0x011C)
GetDPLocations failed with error 0x80072ee7
ccmsetup 4/1/2013 6:57:24 PM
284 (0x011C)
Failed to get DP locations as the expected version from MP 'vCM-PRI.contoso.loc'. Error 0x80072ee7
ccmsetup 4/1/2013 6:57:24 PM
284 (0x011C)
Next retry in 10 minute(s)... ccmsetup
4/1/2013 6:57:24 PM 284 (0x011C)
Current AD site of machine is Default-First-Site-Name
LocationServices 4/1/2013 7:07:39 PM
284 (0x011C)
Local Machine is joined to an AD domain LocationServices
4/1/2013 7:07:39 PM 284 (0x011C)
Unable to retrieve AD forest + domain membership
LocationServices 4/1/2013 7:07:54 PM
284 (0x011C)
DHCP entry points already initialized. LocationServices
4/1/2013 7:07:54 PM 284 (0x011C)
Begin checking Alternate Network Configuration
LocationServices 4/1/2013 7:07:54 PM
284 (0x011C)
Finished checking Alternate Network Configuration
LocationServices 4/1/2013 7:07:54 PM
284 (0x011C)
Adapter {B34BA4D3-826D-487E-91DB-6BB818F8F61B} is DHCP enabled. Checking quarantine status.
LocationServices 4/1/2013 7:07:54 PM
284 (0x011C)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name=""/>
<Domain Name=""/>
<IPAddresses>
<IPAddress SubnetAddress="192.168.137.0" Address="192.168.137.50"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
4/1/2013 7:07:54 PM 284 (0x011C)
Sending message header '<Msg SchemaVersion="1.1"><ID>{2127E2AF-819A-437B-AB9A-8B3127FD75B7}</ID><SourceHost>VXP1</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VXP1:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>vCM-PRI.contoso.loc</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-04-01T23:07:54Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1018"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
CCM_POST 'HTTP://vCM-PRI.contoso.loc/ccm_system/request'
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
GetDPLocations failed with error 0x80072ee7
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
Failed to find DP locations with error 0x80072ee7, status code 200. Check next MP.
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
Only one MP vCM-PRI.contoso.loc is specified. Use it.
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
Have already tried all MPs. Couldn't find DP locations.
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
GET 'HTTP://vCM-PRI.contoso.loc/CCM_Client/ccmsetup.cab'
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
Failed to send HTTP request. (Error at WinHttpSendRequest: 12007)
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
WinHttpRequestReponse failed with a non-recoverable failure, 12007
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
DownloadFileByWinHTTP failed with error 0x80072ee7
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
A Fallback Status Point has not been specified. Message with STATEID='308' will not be sent.
ccmsetup 4/1/2013 7:07:54 PM
284 (0x011C)
CcmSetup failed with error code 0x80072ee7
ccmsetup 4/1/2013 7:07:54 PM
1848 (0x0738)

2ee2 is a connection timeout. If your MP is otherwise responsive to clients it could be a database connectivity issue
on the MP. Ensure you can get to http://sccm.contoso.com from
a browser on your client machine. You should also check MP_Framework.log and MP_LocationManager.log on the MP if all looks good with the networking on the client side.
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please mark as helpful/answer if this resolved your issue

Security check failed in Report services

Hi
We are facing Errors in the Secured report services.We are able to login into the report server with url and its server name.but when the users access the reports then they are facing the below mentioned error.Pls help on this.
Error :
REP-56071:Security check failed with error message: Invalid error ID : -1.
Pls revert if any more details

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

DDNS Authentication Fails with E2000

Just purchased an E2000 (Firmware version 1.0.03) to use with DDNS. Much to my surprise there seems to be a problem with saving the password at the confiuration screen.
Settings;
- Service Type = DynDNS.org
- Username = <my user name.
- Password = <my password>
- Hostname = <my host name>
- System = Dynamic
With the above settings entered and the Update button pressed favourable results are obtained; the router reports that DynDNS.org updates okay. However once the "Save Settings" button is pressed an update fails with the error "Authorization failur bad ID or password"
Is anyone else experiencing this issue? Is the password field limited to certian characters?

same thing happens for me with my E2000 running 1.0.03. if i enter my username and password for dyndns into the web interface and click Update, i get the "DDNS is updated successfully" message. but then i'll immediately press Update again and i'll get "Authorization fails (username or passwords)".
changing my password on dyndns and then updating my router configs didn't do the trick (which isn't much of a surprise).

SQL30082N Security processing failed with reason "15" (PROCESSING FAILURE)

Similar Messages

Maybe you are looking for