SQLOD32W do not release its control handler.

Hello,
I have a windows service, this windows service use MAXDB database and release the environment. When I shutdown the computer I have a GPF.
The address is <SQLOD32W BASE ADDRESS> + 0x86510.
I think this is a ControlHandler installed by SQLOD32W. This handler is not release when DLL_PROCESS_DETACH is called.
I can workaround the issue by installing my own ControlHandler, but do you know this is a known bug ?
Yann.

Hello Yann,
there are some restrictions with the ODBC driver including 7.6, which probably will not be changed in the future.
Starting with SAP MaxDB 7.7 a new ODBC driver is available which was completely new written (basing on SQLDBC, our main low level interface). At the momen 7.7 is not available as download edition, but I can provide you with the [new ODBC driver|https://sapmats-de.sap-ag.de/download/download.cgi?id=NFPSS6QZGWYKYJIYNFOTBO71ED9H0RWZG1OM4VUVOSOOO8E9ES].
Please use it as evaluation copy of the current MaxDB ODBC driver. If there are problems, please let me know.
The archive contains the ASCII and Unicode version and the trace tool of the new driver. For registration please use the odbcreg-tool of 7.6
odbcreg -i newMaxDB -p c:\MaxDB_ODBC77 -d sdbodbc.dll
Regards Thomas

Similar Messages

I am getting a windows security pop up in VMPLayer " this page is accessing information that is not under its control "

No matter which button I push, it ignores it and starts over in a loop. I am trying to create a VM of Win 7 from an MDT iso image. I have done this dozens of times until this week, now this pop up window prevents me from doing so.
I have tried several different user accts. I have tried it locally on the same box. I have even removed the last 2 months worth of patches and updates from the system, nothing seems to work.

I have also purchased the VMPlayer 7 pro, so the (Non Commerical Use Only) is an old picture

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support.

SQL Server Memory Usage Peaks to 95% and its not releasing SQL 2012

We are currently running SQL 2012 64 bit, Lock Pages Enabled, 128 GB. We allocated Max Memory 112000, Min Memory to 0. We have a SQL Maintenace Job which backs up (Full Backup) of our server around 11PM at that time the SQL Server memory peaks to almost
96% even during full business hours we are constantly in the range of 56 to 60% but after 11PM within 10 minutes of the job it peaks to 95 or 96 Percentage and even after the job completes it's not releasing the memory back. I have to manually shut the sql
service and then restart at that time it comes back to normal.
Any suggestions/any help really appreciated.

Here are the details Memory is at 96% I still didn't restart...Please any help appreciated...The memory detals is for 24 hours I restarted the service around 11AM before I posted my previous message..
Memory Used by SqLServer: 119329
Locked Pages Used SQLServer : 105969
Total VAS in MB : 8388607
Process Physical Memory Low : 0
Process Virtual Memory Low : 0
Max Memory set to :112000
Out of 128 Memory Last 24 hours the memory usage in %
Percent Memory Used - Total Memory is 128.0 GB
Last 24 Hours
DATE / TIME
Memory Used
19-Dec-14
11:46 PM
96.24659602
20-Dec-14
12:46 AM
96.24578349
20-Dec-14
1:46 AM
96.25146739
20-Dec-14
2:46 AM
96.24345652
20-Dec-14
3:46 AM
96.27311834
20-Dec-14
4:46 AM
96.28947067
20-Dec-14
5:46 AM
96.18931325
20-Dec-14
6:46 AM
96.09323502
20-Dec-14
7:46 AM
96.07915497
20-Dec-14
8:46 AM
96.07906977
20-Dec-14
9:46 AM
96.0784111
20-Dec-14
10:46 AM
96.07415009
20-Dec-14
11:46 AM
26.03422141
20-Dec-14
12:46 PM
33.57474359
20-Dec-14
1:46 PM
39.466561
20-Dec-14
2:46 PM
41.85940742
20-Dec-14
3:46 PM
43.89071274
20-Dec-14
4:46 PM
45.80877368
20-Dec-14
5:46 PM
46.49493281
20-Dec-14
6:46 PM
46.68486468
20-Dec-14
7:46 PM
46.69701958
20-Dec-14
8:46 PM
46.69994736
20-Dec-14
9:46 PM
57.5012455
20-Dec-14
10:46 PM
96.25695419
I verified its a sqL job and still my memory is 95%
It peaeked at 10:46PM and here are the details of the SQL job which started at 10:30
Progress: 2014-12-20 22:30:04.39
Source: Check Database Integrity Task Executing query "USE [DATASTORE] ".: 50% complete End Progress Progress: 2014-12-20 22:43:06.10
Source: Check Database Integrity Task Executing query "DBCC CHECKDB(N'DATASTORE') WITH NO_INFOMSGS ".: 100% complete End Progress
Progress: 2014-12-20 22:43:06.11 Source: Check Database Integrity Task Executing query "USE [ETL_Proc] ".: 50% complete
End Progress Progress: 2014-12-20 22:46:52.56 Source: Check Database Integrity Task Executing query "DBCC CHECKDB(N'ETL_Proc')
WITH NO_INFOMSGS ".: 100% complete End Progress Progress: 2014-12-20 22:46:52.64 Source: Back Up Database Task
Executing query "EXECUTE master.dbo.xp_create_subdir N'P:\SQL_Backu...".: 20% complete End Progress
Progress: 2014-12-20 22:46:52.64 Source: Back Up Database Task Executing query "EXECUTE master.dbo.xp_create_subdir N'P:\SQL_Backu...".
: 40% complete End Progress Progress: 2014-12-20 22:46:52.64
Source: Back Up Database Task Executing query "EXECUTE master.dbo.xp_create_subdir N'P:\SQL_Backu...".: 60% complete
End Progress Progress: 2014-12-20 22:46:52.64 Source: Back Up Database Task
Executing query "EXECUTE master.dbo.xp_create_subdir N'P:\SQL_Backu...".: 80% complete End Progress
Progress: 2014-12-20 22:46:52.64 Source: Back Up Database Task
Executing query "EXECUTE master.dbo.xp_create_subdir N'P:\SQL_Backu...".: 100% complete End Progress
Progress: 2014-12-20 22:46:55.63 Source: Back Up Database Task
Executing query "BACKUP DATABASE [ReportServer] TO DISK = N'P:\SQL...".: 100% complete
End Progress Progress: 2014-12-20 22:46:56.55 Source: Back Up Database Task
Executing query "BACKUP DATABASE [ReportServerTempDB] TO DISK = N'...".: 100% complete End Progress Progress: 2014-12-20 22:46:57.35
Source: Back Up Database Task Executing query "BACKUP DATABASE [dbamaint] TO DISK = N'P:\SQL_Bac...".: 100% complete End Progress
Progress: 2014-12-20 22:51:13.08 Source: Back Up Database Task
Executing query "BACKUP DATABASE [DATASTORE] TO DISK = N'P:\SQL_Ba...".: 100% complete End Progress
Progress: 2014-12-20 22:51:52.72 Source: Back Up Database Task
Executing query "BACKUP DATABASE [ETL_Proc] TO DISK = N'P:\SQL_Bac...".: 100% complete End Progress Progress: 2014-12-20 22:51:54.87
Source: Rebuild Index Task Executing query "USE [ReportServer] ".: 0% complete End Progress Progress:
2014-12-20 22:51:54.88 Source: Rebuild Index Task Executing query "ALT... The package executed successf... The step succeeded.

Bug in Flash Professional CC when launching debug launcher xml file handle not released

There appears to be a bug in either Adobe Flash Professional CC, or ADL when launching debug launcher for an AIR application Flash Professional CC automatically generates or updates the XML app descriptor file. The bug is that Flash Professional is not immedately releasing the file handle to the app descriptor XML file.
This bug was introduced in Flash Professional CC (Windows). It did not occur in CS5.5 or CS5.
The question is whether this is a bug related to the ADL, or if this bug is related specifically to Flash Professional CC (Windows).
Either way, where and how do I appropriately report this bug?

Hi Dharmendra,
Thank you for the solution. It is not what I expected, but it might look like a solution that "could" be applied.
There is still one problem with this approach. If I still use a movie with radial gradient within the bitmap, the same exact problem could occur again.
I was trying to understand if I did something wrong in my code, or it was a bug in the Flash software. I still find weird that I get different results by drawing a movie clip at different positions on a bitmap object. How can the drawing position change if the movie clip is drawn or not drawn? Why does it make mathematical patterns? I guess it has something to do with the precision numbers.
Meanwhile, I did a few extra tests. I tried a new approach with Blur and Glow effects. That is not exactly what I want, but it seems to create a transparent gradient. I might consider this approach if the basic radial gradient does not work. I also created a gradient transparency circle bitmap in Photoshop that I imported into my movie clip. It worked. So, at the moment I have two solutions that seem to be working.
I would appreciate if you could investigate the original problem. It looks like there is a problem in the rendering of Flash. Workarounds are fine sometimes, but I do not expect to developer programs on workarounds.

Firefox 11 does not update its window in a remote control RealVNC session

When I am remote controlling a Windows XP 64bit PC with RealVNC, Firefox 11 does not update its window contecns. Old Firefox 3.6 works just fine. Is it called a redraw or drawing issue?

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Free Stmt Handle NOT release Memory allocated inDefineByPos[LongRaw]

My Question is : Why Free Stmt Handle does not release the memory OCI allocated during OCIDefineByPos for data type "Long Raw"
Please notice the Bold Fonts in the dtrace logging. Ptr is the pointer returned by malloc. Size is the memory size allocated.
I use OCI to fetch records, each round I will fetch 1000 records. I found memory increase round by round. So I use dtrace to probe the memory malloc/free. At the end of each round, I will free the handle of SQL Statement. According the documentation, all the sub handles belongs to stmt handle should be free also. But I noticed that memory allocated during DefinebyPos for LongRaw did not get released.
1. The SQL Send to DB each round is the same.
2. I do the "Define" each round. So It's actually a "RE-Define" each round.
The length of Long Raw is 512K. Here's the dtrace result when I call the OCIDefineByPos. There's a 2MB memory allocated, I don't know the reason.
CPU ID FUNCTION:NAME
3 45971 free:entry Ptr=0x247652d0 Size=0 TS=1568035638893113 FreeTime=2008 Jul 20 23:26:09
libc.so.1`free
libclntsh.so.10.1`sktsfFree+0x18
libclntsh.so.10.1`kpummfpg+0xb6
libclntsh.so.10.1`kghfrempty+0x17c
libclntsh.so.10.1`kghgex+0x13c
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kpuhhalo+0x1fd
libclntsh.so.10.1`kpuex_reallocTempBufOnly+0x5f
libclntsh.so.10.1`kpuertb_reallocTempBuf+0x36
libclntsh.so.10.1`kpudefn+0x2d1
libclntsh.so.10.1`kpudfn+0x39e
libclntsh.so.10.1`OCIDefineByPos+0x38
scrubber`_ZN29clsDatabasePhysicalHostOracle6DefineEN7voyager15eBayTypeDefEnumEiPhiPs11EnumCharSet+0x17f
3 45966 malloc:return Ptr=0x252ad100 Size=524356 TS=1568035638916654 AllocTime=2008 Jul 20 23:26:09
libc.so.1`malloc+0x49
libclntsh.so.10.1`kpummapg+0xcc
libclntsh.so.10.1`kghgex+0x1aa
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kpuhhalo+0x1fd
libclntsh.so.10.1`kpuex_reallocTempBufOnly+0x5f
libclntsh.so.10.1`kpuertb_reallocTempBuf+0x36
libclntsh.so.10.1`kpudefn+0x2d1
libclntsh.so.10.1`kpudfn+0x39e
libclntsh.so.10.1`OCIDefineByPos+0x38
scrubber`_ZN29clsDatabasePhysicalHostOracle6DefineEN7voyager15eBayTypeDefEnumEiPhiPs11EnumCharSet+0x17f
scrubber`_ZN18clsDatabaseManager6DefineEN7voyager15eBayTypeDefEnumEiPhiPs+0x13c
scrubber`_ZN17clsDatabaseOracle13DefineLongRawEiPhiPs+0x2f
3 45971 free:entry Ptr=0x2476ab30 Size=0 TS=1568035639035363 FreeTime=2008 Jul 20 23:26:09
libc.so.1`free
libclntsh.so.10.1`sktsfFree+0x18
libclntsh.so.10.1`kpummfpg+0xb6
libclntsh.so.10.1`kghfrempty+0x17c
libclntsh.so.10.1`kghgex+0x13c
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kpuhhalo+0x1fd
libclntsh.so.10.1`kpuertb_reallocTempBuf+0x8f
libclntsh.so.10.1`kpudefn+0x2d1
libclntsh.so.10.1`kpudfn+0x39e
libclntsh.so.10.1`OCIDefineByPos+0x38
scrubber`_ZN29clsDatabasePhysicalHostOracle6DefineEN7voyager15eBayTypeDefEnumEiPhiPs11EnumCharSet+0x17f
scrubber`_ZN18clsDatabaseManager6DefineEN7voyager15eBayTypeDefEnumEiPhiPs+0x13c
3 45966 malloc:return Ptr=0x2532d150 Size=2097220 TS=1568035639040090 AllocTime=2008 Jul 20 23:26:09
libc.so.1`malloc+0x49
libclntsh.so.10.1`kpummapg+0xcc
libclntsh.so.10.1`kghgex+0x1aa
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kghgex+0x1e6
libclntsh.so.10.1`kghfnd+0x28a
libclntsh.so.10.1`kghalo+0x669
libclntsh.so.10.1`kpuhhalo+0x1fd
libclntsh.so.10.1`kpuertb_reallocTempBuf+0x8f
libclntsh.so.10.1`kpudefn+0x2d1
libclntsh.so.10.1`kpudfn+0x39e
libclntsh.so.10.1`OCIDefineByPos+0x38
scrubber`_ZN29clsDatabasePhysicalHostOracle6DefineEN7voyager15eBayTypeDefEnumEiPhiPs11EnumCharSet+0x17f
scrubber`_ZN18clsDatabaseManager6DefineEN7voyager15eBayTypeDefEnumEiPhiPs+0x13c
scrubber`_ZN17clsDatabaseOracle13DefineLongRawEiPhiPs+0x2f
scrubber`_ZN5dblib11DbExtractor18DefineLongRawFieldEiPhiPs+0x2b

Assumption : You are using OCIHandleFree((dvoid*)DBctx->stmthp,(ub4)OCI_HTYPE_STMT);
There are two scenarios here the LONG Raw mapping and release of memory.
Unlike the other data types LONG Raw memory mapping is different since the data type requires more memory chunks.
45971 free:entry Ptr=0x2476ab30 Size=0 TS=1568035639035363 FreeTime=2008 Jul 20 23:26:09
libc.so.1`free
Since from the above statement it clear that free is called . Hence there may be chance in other area of the code I suspect the memory leak is (Like native storage).
Moreover the standard OS behavior is that it will not release the Heap/Stack until the process is complete even the free() is called by the process. This is for performance on memory management.Having said that it should not increase the memory drastically when not required.

Crystal Report Viewer Not Releasing Oracle Database Connections

I have a very simple vb.net 3.5 web application that uses the Crystal Report viewer 2008 to open a report. My requirements are as follows:
1. Reports are built by another company and provided to us and used in a web environment
2. All reports contain parameter fields
3. The web application must be generic enough that a report can be added to a list and the user simply selects the report and provides database login information. The Crystal report viewer with handle the request for parameter values and prompt the user for their values.
4. All reports connect to an Oracle 10g server.
The above requirements have been meet and we have an extremely simple web application that runs the reports. It is working very well other than the crystal report viewer is not releasing the database connections. This is bad because the credentials are on a per user basis and that same user must login to a different oracle application simultaneously. They are being denied access because the credentials are already in use. We do not have control nor influence over the policies in use on the Oracle server. Ideally we would like to control the Crystal Report viewer so that it closes connections after use.
The web application code is:
Private Sub viewReports_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Not IsPostBack Then
ConfigureCrystalReport()
End If
End Sub
Private Sub ConfigureCrystalReport()
'Load the Crystal Report viewer with a report.
Try
Dim reportPath As String = Server.MapPath(Session("reportname"))
crViewer.ReportSource = reportPath
Catch ex As Exception
Response.Write(Server.MapPath(Session("reportname")) & "
" & ex.Message.ToString & "
" & ex.StackTrace.ToString)
End Try
End Sub
Can anyone shed some light on this topic? Thank you

Hello, Timothy;
By default, having the report in session will hold it open for 20 minutes.
If you create the report as a ReportDocument object you can take it out of session and release it more efficiently. That will release the connection.
    Private Sub ConfigureCrystalReports()
        If (Session("hierarchicalGroupingReport") Is Nothing) Then
            hierarchicalGroupingReport = New ReportDocument()
            hierarchicalGroupingReport.Load(Server.MapPath("Hierarchical Grouping.rpt"))
            Session("hierarchicalGroupingReport") = hierarchicalGroupingReport
        Else
            hierarchicalGroupingReport = CType(Session("hierarchicalGroupingReport"), ReportDocument)
        End If
        myCrystalReportViewer.ReportSource = hierarchicalGroupingReport
    End Sub
In the Form Unload of the Viewer:
            'Take the report out of session
            Session("hierarchicalGroupingReport") = Nothing
            Session.Contents.Remove("hierarchicalGroupingReport")
            'Clean up the ReportDocument object
            hierarchicalGroupingReport.Close
            hierarchicalGroupingReport.Dispose()
            hierarchicalGroupingReport = Nothing
            GC.Collect()
Elaine

Problem with PresentModalViewController and it is not releasing components

Hi ,
Here is the code that takes the user to next screen.
==============
UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:elementController];
[[self navigationController]presentModalViewController:navController aimated:YES];
[elementController release];
[navController release];
================
I have two screens
1)First screen
2)second Screen
In First screen i have a button, when i click on this the above code executes.
then it takes control to second screen
Even if i released the nav Controller and ElementController , the elements like iubaritem,navigation items are not releasing
Please help me out

Cloud programs do not use serial numbers... you log in to your PAID Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Function Module not released yet. Has anybody used them in their programs?

Hi
I am trying to use the barcode functionality during a goods movement 101 (using MIGO). As we donu2019t have any control of SAPu2019s barcode functionality thru configuration in MIGO I have developed a custom popup and I am calling this in a BADI implementation MB_MIGO_BADI. Once the user enters the barcode then I call Function module ARCHIV_BARCODE_GLOBAL to save the barcode to the standard tables.
This Function module is not released to the customers and it was last changed on 11/12/2004.
My question is should I be using this Function module in my BADI implementation even though it is not released (does not have a release date) ?. Has anyone of have used a unreleased Function module in your programs?.
Additionally I need this info
I am using ECC 5.0. If anyone of you is using ECC 6.0 or higher can you please check and let me know if this FM ARCHIV_BARCODE_GLOBAL is released or not or when was it last changed.
Please advice me at you earlist
Thanks of your time
SHraj

Hi,
We are not using the above FM. But I can give some Info from ECC 6.0.
In ECC 6.0 the above FM is realeased for customers.
Last changed on:28.12.2004 18:28:16.
You can use the same code in ur Z function module.
Thanks and Regards

WINDOWS MANAGEMENT FRAMEWORK 4.0 - A required certificate is not within its validity period

Hello,
I can't figure out if this is because the Root Certificates were updated in April 2014 then apparently expired by Microsoft or if the PowerShell installer signed this file with a bad software release signature??
We were deploying PowerShell 4.0 (Windows6.1-KB2819745-x64-MultiPkg.msu) with ConfigMgr 2012 with a dependency of .NET Framework 4.5.1. Everything was working fine until sometime around April 24 (exact date unknown). Now any
Win 7 SP1 machines I try to update will not install WMF 4.0. They installed .NET 4.5.1 without any trouble..
The digital signature on it it states it was signed Sept 27 2013 and the certificate expires 4/24/2014.
Even if we change the system clock to April 1 2014 it still will not install.. but this shouldn't matter anyway. They just can't sign new software with that certificate.. surely I can install it..
As for a log... If I run as C:\Windows\ccmcache\3>wusa.exe Windows6.1-KB2819745-x64-MultiPkg.msu /log:c:\windows\ccmcache\3\broken.txt
In the broken.txt I see:
Install Worker.01194: Operation Result Code of the installation: 0X4 HRESULT of the installation: 0X80240022 Operation
Result Code of the update:0X4 HRESULT of the update: 0X800b0101
Install Worker.01243: Failed install update Update for Windows (KB2819745)
Install Worker.01287: Exit with error code 0X800b0101 (A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.)
WINDOWS MANAGEMENT FRAMEWORK 4.0 FOR MICROSOFT OPERATING SYSTEM PRODUCTS
Windows6.1-KB2819745-x64-MultiPkg.msu
I also see this same event information in Setup event log..
I don’t know what to do here. Anyone else having this problem?

Hi,
Have you ever seen this article?
Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
http://support.microsoft.com/kb/2328240/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Mail.jar is locked when sending a mail using servlet and not releasing

Hi everybody,
The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
the problem is not recorded in any logs.
1. Please create a servlet that sends mail
2. Send a mail to any mailid
3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
when i removed Transport.send(msg); from code it works fine. but ??
please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
please help me to recover from this issue.
Thanks,
Prasad.N

hi friend
I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
what may be the reason?
Thanks,
Prasad.N

Purchase order yet not released

Hi sap gurus,
i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

Hi Prasad
Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
Just go to Transaction ME29N or ME28, enter ur PO no.
If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
Best regards
Vineet Baweja

SQLOD32W do not release its control handler.

Similar Messages

Maybe you are looking for