Sqlserver date insert question

Hi All
I use SQLServer 2005
I use JDBC to insert values into database.
My date is like this...
Release Date is:10/25/2006
SQL:
insert into releases(appid, releasedate) values(?,
to_date(?,'MM/dd/yyyy'))
I can get this to work in oracle. However in SQLServer 2005 I get this
exception..
com.microsoft.sqlserver.jdbc.SQLServerException: 'to_date' is not a
recognized built-in function name.
at
com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unkno?wn
Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown
Source)
How do I change SQL. Please let me know.
Thanks

SQL:
insert into releases(appid, releasedate) values(?,
to_date(?,'MM/dd/yyyy'))
I can get this to work in oracle. However in
SQLServer 2005 I get this
exception..
com.microsoft.sqlserver.jdbc.SQLServerException:
'to_date' is not a recognized built-in function name.
Which part of the above error message did you not understand?

Similar Messages

SQL server Timeout issue in data insertion

We are loading data from DB2 database to SQL server using Data flow task. During data insertion in SQL server, we are receiving the below error.
"An exception has occurred during data insertion, the message returned from the provider is: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Kindly help to resolve this issue.
Thanks!!!

Check the connection timeout property of the source connection.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a5571966-b14e-45c6-9ce8-4f5651d3ee00/ado-net-destination-timeout-issue?forum=sqlintegrationservices
Regards, RSingh

Exception has occurred during data insertion ... Wrong number of parameters

I am using an ADO dataflow source and an ADO dataflow destination to move data from a table on an IBM iSeries DB2 database to another IBM iSeries DB2 database on another machine. The connection managers for source and destination both use .Net Providers\Odbc
Data Provider with the Data Source Specification being ODBC connections specified on the Windows Server 2008 r2 machine hosting bids. All the test connections work...so far so good.
Issue is when I execute the control flow task the rows get picked up from the source DB2 database no problem but it fails on the insert to the destination DB2 table...The progress tab specifies the exceptions...
[ADO NET Destination [601]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [07002] [IBM][System i Access ODBC Driver]Wrong number of parameters.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (601) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (604). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
I put a data viewer on the data flow connection and the records I expect are getting picked up and look ok. I checked to make sure the source and destination tables have the same number of columns in their record layout and identical data
types and they look fine.
Could someone kindly tell me whats going wrong? Does the error message indicate that some of the columns are getting dropped from the dataset before the insert?
Thanks much in advance for any help, Roscoe

Hi Roscoe,
Glad to hear that you have found the root cause. So, the issue occurs because numeric values with no decimal cannot be inserted into the Decimal data type column in the DB2 table. In SSIS, data type Decimal of DB2 database is mapped to data type DT_NUMERIC.
To address the issue, you can do a data conversion for the column in question to define its precision and scale such as DT_NUMERIC(9,2) by using the Data Conversion Transformation before the ADO NET Destination.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Disabling data insertion in WFTASKHISTORY

Hi
In Orabpel.WFTaskPkg .. a procedure called 'updateTask' is defined;
In the procedure following line is executed :
IF p_IsVersionable = BOOLEAN_TRUE_STRING THEN
createHistory(p_taskID);
END IF;
It inserts a record in the WFTASKHISTORY table if p_IsVersionable = true....
Is it possible to set the value of 'p_IsVersionable' so that I can control the data insertion in WFTASKHISTORY table ? Any pointer will be helpful!!
Thanks

Hi Satish, this is an interesting question and as Michaela points out, Comments should be used to store non numeric data elements.
However, your question makes me wonder what exectly do you want to enter characters for ? How would your use of characters for an amount be defined ? In case you would like to tell something about the amount (like the 100 for write-off is due to a customer not paying any bills), then you would use comments. I can imagine however that you want to use characters for sanother reason like adding new memebers to the database, but then you have to follow a different procedure.
So please explain to what other use of characters you are thinking about.
Best regards,
Edwin van Geel

Customizing data insert from

I have a data insert from that is solely used to insert data in a database. I am trying to figure out a way to customize it such that a few file get auto filled. I use the form to insert data in a table called maintable. 8 of the 10 field of this maintable filled from different vendor's table(currently i manaully put it). What I like to do is see if I can integrate the vendor's table in the page and write codes to autofill the form that put the data in the maintable. I know maybe a while statement will do it. So if in the form I input vendor's name and product id. it will get the data from vendor's table and relavent product to fill rest of the field. Any guidance will be greatly appreciated as I am very new to web development and don't have much experince in PHP codes.
Thanks

Maybe u can try like this. Assuming you have two inputs in form which I have assigned as below
$product_id = $_POST['pid'];
$vendor = $_POST['vendor_name'];
Then do check for vendor name input.
if(isset($_POST['vendor_name') && !empty($_POST['vendor_name'])) {
$query = " SELECT * FROM vendor WHERE vendor_name = '$vendor' ";
$query2 = mysql_query($query, $databaseName) or die(mysql_error);
$vendor = mysql_fetch_assoc($query2);
} else echo 'Vendor name doesn't exists';
$var = $vendor['var'];
assign for the rest values u want to store in maintable
//do insert record
$insert = INSERT INTO maintable .... VALUES ('$vendor', '$var',.....)

Another DATE/TIME question

HI all
I am trying to INSERT INTO TABLE a date and time into one line..
excerpt looks like
CREATE TABLE Test
(Submit DATE );
INSERT INTO Test
VALUES(to_date('2001-01-02 22:23:00','yyyy-mm-ss hh24:mi:ss'));
I get an error message that says it's missing a comma (and I can't figure out WHERE). I have tried quotes in different places etc...Is it not possible to put a date and a time in the same slot?
Thanks in advance

Try this...
SQL> create table mytest (submitted date);
Table created.
SQL> desc mytest
Name Null? Type
SUBMITTED DATE
SQL> insert into mytest
2 (SUBMITTED)
3 values
4 (to_date('2001-01-02 22:23:00','yyyy-mm-dd hh24:mi:ss'));
1 row created.
SQL> select * from mytest;
SUBMITTED
02-JAN-01
HI all
I am trying to INSERT INTO TABLE a date and time into one line..
excerpt looks like
CREATE TABLE Test
(Submit DATE );
INSERT INTO Test
VALUES(to_date('2001-01-02 22:23:00','yyyy-mm-ss hh24:mi:ss'));
I get an error message that says it's missing a comma (and I can't figure out WHERE). I have tried quotes in different places etc...Is it not possible to put a date and a time in the same slot?
Thanks in advance

Combo Box doesn't persist data insertion settings

Hi,
I'm simply trying to setup a combo box that places the selected label into a destination table cell. I've tried about every combination possible to simply add a data insertion series. Please note, I AM clicking the plus button to add it to the list shown to the left of the settings. Unfortunately, everytime I have the series added and I click away from the selected combo box it loses the settings I just provided.
Has anybody else had these frustrating issues with the combo box component?
Thank you.

Greg,
The combo box component can be a bit fiddly at times. It would help if you let me know which version of Xcelsius you are using.
In any case if you are simply trying to insert the label to a destination you dont need to bother with the series at all. Try it in this order:
1) Drag a combo box component
2) In combo box properties pane and click on the range select button beside Labels
3) Select the range in your excel sheet that has the labels and click OK
4) Go back to the properties pane and choose Insertion Type: Label
5) Click the range select button beside Destination and select a cell
6) To test it drag a Text -> Label compoent in and point it to the destination cell you selected in step 5.
7) Preview to see if all is in order
Let me know how you get on.
Cheers,
Ryan

Blank boxes when I insert question slides.

I posted this yesterday and no one replied... Hopefully
someone can give me some advice. Thanks!!
I am trying to create a new project in CP3 and once I publish
the project, there are 2 blank boxes on each slide and the movie
stops on the second slide. These projects consist of 8 PPT slides,
7 image slides, and 5 questions slides... and this project is
narrated. I have tried creating the project again hoping the blank
boxes would go away and that didn't work. So I published this
module one slide at a time to try and determine the root of the
problem. I can publish all 15 slides of images and PPT as a SWF
file with no problem. But once I insert question slides, that's
when the blank boxes appear and the module stops on slide 2. I
think this is odd considering my question slides are the last 5
slides of the module but the blank boxes start on slide one. When
previewing each slide, each 5 slides, or the entire project, there
are no problems. It's just once I publish the project. I've tried
publishing to SWF file and a stand alone disc.. same problem. I
also tried bringing up a module I had done before on CP1 and
converted the files, made no changes to the project and just
published it with CP3 as SWF file. I got the blank boxes and the
project stopped at the second slide. The question slides I have are
simple T/F or multiple choice slides and I don't have them set up
to record results.
Any ideas what I'm doing wrong? I've published about 25 of
these modules in CP1 and never had this problem in the past. I
would be happy to send someone an example of what I'm talking
about.
Thanks!
Mindy Wilson
Training Coordinator
TALX Corp

Thanks for responding. No, I don't have any interaction on
the project. I even tried to create a new project and inserted 2
PPT slides (with text only) and then one question slide... I just
made up a simple T/F question just to have a question slide in that
project and once I published it, it happened again. If I deleted
that question slide and published, the blank boxes were gone and it
didn't freeze up.
I was on the phone all morning with Adobe support and they
suggest I reinstall the software. All software disks for my company
are located at home office so once I receive the software tomorrow,
I'll try it again. If that doesn't work, I'll certainly appreciate
any help.
Thanks!

Spatial data insert problem

Hello,
i want to make an spatial data insert, but it doesn't work well. Help would be fine.
create table SCHIFFSPOSITION(
SCHIFF_ID                    NUMBER NOT NULL,
SCHIFF_NAME                VARCHAR(25),
SYS_POS_SN               VARCHAR(25),
SYS_LAT_P4_DER               VARCHAR(15),
SYS_LON_P4_DER               VARCHAR(15),
GEOM                          SDO_GEOMETRY,
constraint PK_SCHIFFSPOSITION primary key(SCHIFF_ID));
insert into MDSYS.USER_SDO_GEOM_METADATA values ('SCHIFFSPOSITION', 'GEOM',
SDO_DIM_ARRAY (
SDO_DIM_ELEMENT ('Longitude', -180, 180, .0005),
SDO_DIM_ELEMENT ('Latitude', -90, 90, .0005)),8307);
create index SCHIFFSPOS_IDX on SCHIFFSPOSITION(GEOM) indextype is MDSYS.SPATIAL_INDEX parameters('sdo_indx_dims=2, layer_gtype=point');
INSERT INTO SCHIFFSPOSITION(SCHIFF_ID, SCHIFF_NAME, SYS_POS_SN, SYS_LAT_P4_DER, SYS_LON_P4_DER,
MDSYS.SDO_GEOMETRY(2001,8307, MDSYS.SDO_POINT_TYPE(SYS_LON_GRAD_DER,SYS_LAT_GRAD_DER,null),null,null)))
VALUES (1, 'METEOR 63', 'GPS', '33° 54,4246 S', '18° 25,9184 E', '18.4319736', '-33.9070772');
thank you very much

Hi,
please insert that way:
INSERT INTO SCHIFFSPOSITION(SCHIFF_ID, SCHIFF_NAME, SYS_POS_SN, SYS_LAT_P4_DER, SYS_LON_P4_DER,GEOM)
VALUES (1, 'METEOR 63', 'GPS', '33° 54,4246 S', '18° 25,9184 E', MDSYS.SDO_GEOMETRY(
2001
,8307
, MDSYS.SDO_POINT_TYPE(
    18.4319736
    ,-33.9070772
    ,null
,null
,null
)

How is the data inserted into JTF_RS_SALESREPS?

Hi,
I wanted to know how is the data inserted into JTF_RS_SALESREPS.When we import the resources from CRM Foundation responsibilty the data will be inserted into jtf_rs_resource_extns.I think we need to run a concurrent program to transfer data from jtf_rs_resource_extns to JTF_RS_SALESREPS.
Which Concurrent program should be run?
Please help.
Thanks.

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

How is the data inserted into CST_INV_QTY_TEMP table?

Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

The DATA CAP MEGA THREAD....post data cap questions or comments here.

In the interest of keeping things orderly....This is the DATA CAP MEGA THREAD....post data cap questions or comments here.
Please keep it civil.
Comcast is testing usage plans (AKA "data caps") in certain markets.
The markets that are currently testing usage plans are:
Nashville, Tennessee market: 300 GB per month and additional gigabytes in increments/blocks ( e.g., $10.00 per 50 GB ).
Tucson, Arizona market: Economy Plus through Performance tiers receive 300 GB. Those customers subscribed to the Blast! Internet tier receive 350 GB; Extreme 50 customers receive 450 GB; Extreme 105 customers receive 600 GB. Additional gigabytes in increments/blocks of 50 GB for $10.00 each in the event the customer exceeds their included data amount.
Huntsville and Mobile, Alabama; Atlanta, Augusta and Savannah, Georgia; Central Kentucky; Maine; Jackson, Mississippi; Knoxville and Memphis, Tennessee and Charleston, South Carolina: 300 GB per month and additional gigabytes in increments/blocks ( e.g., $10.00 per 50 GB ) Economy Plus customers have the option of enrolling in the Flexible-Data plan.
Fresno, California, Economy Plus customers also have the option of enrolling in the Flexible-Data plan.
- If you live outside of these markets you ARE NOT currently subject to a data plan.
- Comcast DOES NOT THROTTLE your speed if you exceed your usage limits.
- You can check out the Data Usage Plan FAQ for more information.

I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...

Data archieving questioner required

Dear All,
We have been approched by one of our cleint for DATA ARCHIVING from R/3 system.
Management has pushed my name in this.
Requirement is to prepare DATA ARCHIVING QUESTIONER template.
Can please anybody help me out in this regard from MM point of view.
Thanking you in advance.
Regards
Nasir Chapparband.

Hi,
Refer following link;
[http://itmanagement.earthweb.com/datbus/article.php/3109221]
SAP Data Archiving
1.0 Introduction to Enterprise Data Archiving
Currently, a large number of enterprises use SAP R/3 as a platform for integration of business processes. The continuous usage of SAP results in huge amounts of enterprise data, which is stored in SAP R/3. With passage of time, the new and updated data is entered into the system while the old data still resides in the SAP enterprise system.
Since some of the old data is critical, it cannot be deleted. The difficulty is keeping the data you want, and deleting the data you do not want. Hence, a SAP database keeps on expanding rapidly and enterprise systems, which have limited data retention abilities for a few years, suffer from problems such as data overflow, longer transaction processing times, and performance degradation.
The solution of this problem has led to the concept of Data Archiving in SAP. Data Archiving removes out-of-date data from the SAP database that the R/3 system does not need online, but can be retrieved on a later date, if required. This data is known as archived data and is stored at an offline location. Data Archiving not only consistently removes data from the database but also ensures data availability for future business requirements.
One rule of thumb is that in a typical SAP enterprise system, the ratio of data required to be online and instantly accessible to old data, which could be archived, and stored offline is 1:6. For example, if an enterprise has 2100 GB of SAP database, the online data, which is frequently used by SAP users will be 300 MB and the rest (1800 MB) will be scarcely used and hence can be archived.
1.1 Data Archiving u2013 Features
It provides a protection layer to the SAP database and resolves underperformance problems caused by huge volumes of data. It is important that SAP users should keep only minimal data to efficiently work with database and servers. Data archiving ensures that the SAP database contains only relevant and up-to-date data that meet your requirements.
Data archiving uses hardware components such as hard disks and memory. For efficient data archiving, minimum number of disks and disk space should be used.
It also reduces the system maintenance costs associated with the SAP database. In the SAP database there are various procedures such as, data backup, data recovery, and data upgrade.
SAP data archiving complies with statutory data retention rules that are common and well-proven techniques.
SAP data archiving can be implemented in two ways. In the next section both options will be discussed in detail.
Also refer following link;
[SAP Data Archiving Tutorial|http://www.thespot4sap.com/articles/SAP_Data_Archiving_Overview.asp]

Strange data inserted into table via table trigger

Hi ,
There is some strange phenomenon happen occasionally where some tables update records will have a TRIGGER to insert records into a table and once in a while, the record has some strange data inserted which looks like a memory corruption. It is running on 10.2.0.3.
Does anyone ever encounter this before?
Strange result:
PRIM_KEY
-3.614364951000000000000000000000000E-47
-3.614364951000000000000000000000000E-47
Normal result:
PRIM_KEY
1137KT
1137KT
ana

Hi,
What is strange in this? Its not memory corruption. Its just one of the numeric form of representation of number
-3.614364951000000000000000000000000E-47it means -3.614364951 * 10 to the power of -47.
Whatever value has been entered into the table depends on your business logic you coded, and user input.
Regards

How to data insert Source server and Linked server (Target Server) at same transaction

I have try several times for Data insert Source server and Linked server (Target Server) at same transaction. I am using Begin transaction. but Source server is completed and Linked server error (or Linked server Completed and source server
ERROR). at this moment I want ROLL back. how?

Hi
Run below query by changing to yourr linked server name and see if DTC is enable or not.. if not
Begin distributed transaction
select * from [ServerName].master.dbo.sysprocesses
Commit Transaction
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Sqlserver date insert question

Similar Messages

Maybe you are looking for