SRM 6 White or Config Papers?

Hi,
My current client would like to do the SRM 6 ramp up. Does anyone have any white or config papers/docs, which they would be willing to share?
[email protected]
Regards,
Shayne

Hi
Please refer these links.
<b>SRM 6.0 delta documentation
SRM 5 vs SRM 6
I have sent you some more informative docuements on your mail.
Regards
- Atul

Similar Messages

  • SRM 7.0 Config guide

    Hello SRM Gurus,
    Kindly send me SRM 7.0 Classic scenario configuration guide with example screen shots?
    Thank You.
    Regards,
    Magesh.

    Hi Magesh
    Sharing content on this forum is not allowed. You may refer to config guides at the following link
      service.sap.com/srm-inst
    Regards
    Virender Singh

  • SRM 7.0 Config

    Dear All,
    I have started doing config for SRM 7.0, I am following S60_BB_ConfigGuide.
    In PPOMA_BBP under company code in Extended attributes tab i am getting error as **No material group assigned to this value
    Message no. BBP_ATTR010**
    I referred few threads as well like,Re: Error while maintaining attribute PRCAT in PPOMA_BBP and error "There is no material group assigned to this value.Message BBP_ATTR01
    Now i have created a meterial group in R/3 and please let me know how to bring it to SRM
    regds,
    CB

    Thank you sirjee...
    Now i am doing Configurations in SRM
    Site Definitions in SRM using Transaction SMOEAC Administation console...
    Here its mentioned as The sending and receiving systems are defined here for master data as sites. The site for receiving system is preconfigured and delivered as CRM. Therefore only the sending system need to be configured.
    But here its not there & its as CRM with no logical components & all
    When i tried to create a new one as SRM underexisting CRM , i am not able to find type as SRM here.
    Can you please help me what i need to do now ?
    Thanks a ton in advance...
    regds,
    CB

  • SRM service procurement config

    Hi srm team,
    please give the details of
    configuration settings for service procurement in srm.
    arun
    Edited by: arun kumar on Oct 13, 2008 5:37 AM

    The SRM team is not in this forum.
    Try:
    or
    or

  • Transporting SRM Config

    Hi,
    If i transport SRM configs from one system to another, is there anyway i can change backend references in target system. Any program/transaction code?
    Regards,
    Kamal

    Hi. What I normally do is try and leave target system blank and see if that works. It does for some config and then it can be transported fine because there is nothing tying it to 1 backend system.
    For example, the link from product category to G/L account can be configured with no backend system, as long as you configure it before the product categories have been replicated to SRM.
    Some config is entirely dependant on backend system though, and even the SRM cookbooks tells you to configure manually in each client by opening the client as part of the initial set up.
    Regards,
    Dave.

  • SRM 7 & SRM MDM installation & configuration guides required

    Hello,
    I urgently need to get my hands on SRM 7 & SRM MDM instal/config guides and release notes
    I currently donot have access to OSS.
    Can somebody please kindly email them to me on:
    Your help will be greatly appreciated.
    Thank you

    Hi
    Check out this link
    http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
    Thanks
    Uday

  • SRM Catalog Transfer Error

    We have just finished installing SRM 7.0 ABAP (AIX/Oracle/NW 7.0 EhP 1) on one server, SRM 7.0 Java (same config) and SRM-MDM (3.0) on another server.
    The servers talk fine. We're using ABAP for UME, we've done all of the configuration in the SRM-MDM catalog config guide and the SRM config guide.
    We have a test user, set up to be able to see the catalog and shop. When logged in as this test user, we go to Employee Self-Service, Shop and click on a catalog to search. The catalog items are displayed on the screen.
    When we try to transfer items to the shopping cart, we receive an error:
    "Unit not transferred and cannot be determined
    Incomplete items in catalog. Only complete items were transferred."
    There is nothing in the J2EE logs, or MDM logs. No short dumps, nothing in the System log on the ABAP side.
    Can anyone think of any place else to look?

    Log into your MDM_SRM_UI_App, check your OCI setting and find out which field in MDM is mapped to you order unit. And check MDM catalog manager to find out whether or not you are sending this value.
    If this check is fine, check the uom has a correct ISO code in SRM and the primary iso code check box is checked. I am sure the first check should solve your problem
    Thanks
    Padhi

  • SRM workflow - work Item is not being displayed

    Hello,
    We have SRM wrofklow configured on Portal and users are already using it.
    Recently, we got one issue from the user saying he is not able to see the work item on Portal under UWL.
    He can see the same work item in his inbox on SRM system.
    I checked for the task# and task# TS40007953 was there in the standard com.sap.pct.srm.core UWL config file but it is not there in uwl.webflow.SAP_SRM UWL configuration file. 
    com.sap.pct.srm.core has Medium priority where as uwl.webflow.SAP_SRM has low priority.
    I tired doing Re-Register as well on UWL system but no success.
    Can anyone let me what could be wrong? Where it could be errors? On Portal or SRM?
    Thanks in advance for your response.
    Thanks,
    Bhavik

    Hi Bhavik
    Usually when there is one user who is experiencing an issue, it is because they have personalizations set on the UWL.
    Please clear this users personalizations by doing the following:
    Go to system admin, system config, universal worklist and workflow, universal worklist administration.  On the administration page, go to click to manage item types and view definitions.  Here you will see a tab called reset personalizations.  Go there and type in the userid, and reset the personalizations for this user. 
    If personalizations is not what is causing the issue, check to see if this user is missing a role. You can do a cross comparison of two users in both the backend and the portal.  It would be helpful then to also bump up the logging levels on the UWL and look at the latest default trace when this user tries to connect to the portal.
    Best Regards,
    Beth Maben
    EP - Senior Support Consultant II
    SAP Active Global Support
    Global Support Centre Ireland
    **SDN Forum Moderator:
    SAP Enterprise Portal: Application Integration
    **SDN Universal Worklist Wiki:
    http://wiki.sdn.sap.com/wiki/x/ehU

  • SRM Functional interview questions

    Hi all,
    I am a SRM Technical consultant and looking to move to the functional side.
    I am aware of the P2P cycle but If im interviewed for the functional role,what are the possible questions I would have to answer?
    Which areas do I need to focus...E.g. Configuration??Business process???Procurement cycle???
    Any links to get a general idea abt the common terminologies ...business process would be really helpful.
    Thanks.

    Hi Subodh,
    I would advise to go thru SRM course books such as SRM Overview, SRM 210 and SRM 270.
    Knowledge in SAP MM is an added advantage.
    Apart from these go thru SRM cookbooks eg. config of extended classic scenario by Shaz Khan
    Regards,
    Uzair Hussain

  • Manually blocking SRM Extended Classic PO invoices

    Hi All,
    I understand that in tcode MRBR, when we select the radio button:  Manual Payment Block, we can see those invoices blocked at the Header Level.  (tcode MIR4, Payment tab, Pmnt Block field)
    It seems that only those invoices blocked at the time of invoice data entry (MIRO) are displayed.  But many times, we need to manually block the invoice AFTER it has already been entered and those are not displaying in MRBR.
    We are using SRM Extended Classic Config (if that matters) and are on ECC 6.0 SP10.  To block the invoice after the invoice has already been posted, we need to use tcode FBL1N to find the coordinating FI doc # and block it in that transaction code.  When we do that, it does show the block on the coordinating MM invoice number when viewing in MIR4, but it doesn't show in MRBR.  In other words, table BSEG shows the block, but table rbkp_blocked does not.
    Is there another way to manually block at the header level AFTER the invoice has been entered??  (so that it shows on the MRBR report).  Or is this a possible error with SAP's FI/MM integration?
    I thought I'd post my question here first before submitting an OSS message.
    I'd appreciate any guidance on this,
    Cindy

    Decided to just create custom reports to view blocked invoices either in FI or MM.

  • SRM, ROS and SUS scenario question

    Hello Experts,
    We are in the process of implementing MDM, ROS, EBP and SUS scenario in our present project. I went through the documentation. I have couple of questions.
    1. Do we need to have seperate clients for ROS and SUS. What is the best practise.
    2. Since we have SUS, once I transfer BP from ROS to EBP, check the portal vendor box, I would like to know how the registration code will be sent to supplier. Do we need to create the userid in EBP or with the receipt of registration code supplier will be able to create his first initial userid? Also how we can implement this with CUA and EP as part of landscape?
    3. Also since we have MDM, how the new BP information can be migrated or mapped in MDM and how new BP can be sent to backend system? I understand there is BP monitor to check and approve the changes, but how the new BP will be transferred? Do we need to develop new XI message for this? if Yes, from where that can be managed? from EBP or MDM?.
    I searched through help.sap.com for any documentation but no success.
    Thanks in advance
    Vijay.

    Hi,
    1.Refer the foll thread:
    Re: Supplier Registration without SUS or XI?
    2.For supplier registration,SUS is not mandatory.You need to configure ROS for this scenario.The extrenal vendors will register in ROS and then be replicated to R/3.
    You can use EBP only for Supplier registration.
    SUS,ROS and Bidding engine make up the SRM server 5.5/EBP component of SRM 5.0.
    Pls refer the foll link for the complete process:
    http://www50.sap.com/businessmaps/8F152C1AE8F1426FA3B442F905815F54.htm
    For detailed settings/config  of supplier registration,refer the foll threads:
    Re: Not able to transfer suppliers from ROS to EBP
    problems with ROS_PRESCREEN application for screen suppliers and manage bp
    Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
    Supplier Directory
    Re: Supplier Self registration
    Re: SRM Supplier registration config
    Re: External Web Service setting for Supplier Registration ROS to EBP
    Re: Problems when transferring supplier from ROS to EBP...
    3.Not worked on MDM so cant help you on this.
    BR,
    Disha.
    Do  reward points for useful answer

  • Once I put the Firefox Icon in Apps, it shows up as a white circle/slash (as in "no" or "stop") NOT the standard Firefox Icon. I checked plug-ins."Shockwave Flash" shows up Vulnerable. When I update, I get download warnings. (more below)

    Downloaded Firefox and put it into my Apps folder as instructed. Its Icon in my Apps folder is not the Fox/Globe but a white icon of papers with a white circle&diagonal slash (like a white "stop" or do-not-enter sign). When I pulled that to my dock, it transferred there as the Fox/Globe; but I'm concerned about opening Firefox because that Icon in my Apps isn't right. I assumed the circle/slash icon telling me something's wrong with the App. So I checked the PlugIns.
    The PlugIn tells me "Shockwave Flash" is "Vulnerable, Update Now." But there are warnings about that download. When I check that, showing I'm a Mac, it gives me warnings for Windows!- but no warnings for Macs. What's going on?!
    Why am I not getting the standard Firefox Icon in my Apps folder?
    I don't want to corrupt my HD by opening Firefox if that Icon is telling me somethings wrong... (which seems the point of its circle/slash).
    This is all so unclear!

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • Manually Blocking POs from SRM

    Hi All,
    I posted this question on the Financial Forum, but no one there was able to assist and I thought since this is so tightly integrated with MM, someone here might be able to assist. . .
    I understand that in tcode MRBR, when we select the radio button: Manual Payment Block, we can see those invoices blocked at the Header Level. (tcode MIR4, Payment tab, Pmnt Block field)
    It seems that only those invoices blocked at the time of invoice data entry (MIRO) are displayed. But many times, we need to manually block the invoice AFTER it has already been entered and those are not displaying in MRBR.
    We are using SRM Extended Classic Config (if that matters) and are on ECC 6.0 SP10. To block the invoice after the invoice has already been posted, we need to use tcode FBL1N to find the coordinating FI doc # and block it in that transaction code. When we do that, it does show the block on the coordinating MM invoice number when viewing in MIR4, but it doesn't show in MRBR. In other words, table BSEG shows the block, but table rbkp_blocked does not.
    Is there another way to manually block at the header level AFTER the invoice has been entered?? (so that it shows on the MRBR report). Or is this a possible error with SAP's FI/MM integration?
    I thought I'd post my question here first before submitting an OSS message.
    I'd appreciate any guidance on this,
    Cindy

    So you are suggesting that we need to do some additional coding by utilizing this user exit to be triggered by FBL1n, when we manually block using FBL1n??

  • Want to know about SRM

    Hi ALL
    I'm working as a MM consultant right now  and  very much interested to  learn SAP SRM through this Forum.
    Can any one provide me the full details about SRM like Introduction , config steps , architecture and other details if any.
    Awaiting for your reply.
    Best regards
    Ashok Katta

    Hi,
    For basics of SRM you can refer http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
    And for configuration, pl download relevant config guides from service marketplace.
    Regards,
    Nikhil

  • Error While uploading the Config ZIP back

    Hi Friends,
    I am trying to upload a config zip back to Portal but I am getting a error message that Unable to read File : com.sap.pct.srm.core where com.sap.pct.srm.core is config name.
    Any suggestions.
    Thanks
    Devraj
    Edited by: Dev on Aug 31, 2011 6:52 PM

    Hi Shanti,
    Thanks for replying,
    I was uploading the file in wrong manner.
    Now I am able to upload but when I am checking the changes it is not reflecting over the Portal.
    Please suggest what could be the reason.
    Regards
    Devraj

Maybe you are looking for