Custom field added in Module pool is not reflecting in SRM Shopping cart

Hi all,
I have to add a custom field for Plant in the Ship-To address subscreen(BBPSC01) in Shooping cart in SRM.
I have added the field in the program "saplbbp_sc_ui_its" in screen 310.
But I think need to write the HTML code/Java script in HTML template to trigger the code from module pool.
As I am new to this scenario, can anyone please let me know the procedure to follow.
Thanks,
Rakesh.

Hello Anubhav,
If your new customer fields are not displayed dynamically, re-generate Dynpro concerned using report BBP_DYNPROS_GENERATE.
Regards.
Lauurent.

Similar Messages

How to handle Custom field added in BP : Role Bill Account

Hi Friends,
I am working on an interface which creates Bill Account role for a BP but the problem is there are about 15 Custom fields added to standard BP transaction in BA role.
As I am using BAPI_BUPA_FS_CREATE_FROM_DATA2 for creating the BP and
BAPI_BUPA_CENTRAL_CHANGE for changing the BP role Bill Account?
Can anyone tell me how to handle those custom fields in the existing BAPIs or there is some other way of doing it?
Thanks in advance,
Pradeep
Note : Helpful answers will be rewarded.

Hi,
I have seen these BAPIs but are they used with normal BAPIs for BP creation and change.
For example : I create the BP using BAPI_BUPA_FS_CREATE_FROM_DATA2 and for the Custom fields I should use these BAPIs as suggested by you alongwith the create BAPI.
And will it work for Changing the BP also.
Kindly clarify.
Regards,
Pradeep

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

Module Pool TCode not available in production

Hi Friends,
I have developed a module pool program and assigned a transport request number and transported to production.
The transport request has been successfully moved to production server. But in production system, Iam unable to run the transaction code.
In production, when i open the modulepool program , under " display object llist ", it is not displaying the transaction code.
What could be the problem.
Is there any separate transport request number for custom transaction along with module pool program? if so, How to identify.
Please suggest me.
Thank you,
Murali Krishna T.

Hi Murali,
Have you tried to execute the transaction from application toolbar.
If it gives a message like...."Transaction does not exist" then you need to check the same on development server that whether you have transported the right one or not..You might have saved on any other request.
If still facing same isue then let me know what exactly the message you are getting.
Thanks & Regards,
Preetesh

Defaulting a customer field (added through EEW) while bus. obj creation.

Hi All,
There a customer field added through EEW.
Now suppose when we are creating an object (BUS2000170, in my case) this customer filed value should be set the a default value. Under GENIL_MODEL_BROWSER i can see this filed in 'BTitemcustext'.
I am trying to do it through EVENTS (by calling a FM after AFTER_CREATE event) but i could not find 'BTitemcustext' in the table type CRMT_EXTENSION_COMT.
Now i dont know where to set this value.
Can anyobe please help on how we can set default value for fields developed through EEW.
Thanx,
Abhi.
Edited by: abhishek ranjan on Jan 7, 2011 10:11 AM

Hi Rajni,
This BADI will only be called when i will save the order.
I want to set the default value the moment the object is created. Thats why i wanted to do it through events(CRMV_EVENT).
The reason being suppose the order is not saved , till then this default value will not be visible in the UI side(Even after the object creation).
Also where i can set this default value??
I mean this field is available under the model 'BTITEMCUSTEXT'. Also the filed is not visible in the table type for extensions (CRMT_EXTENSION_COMT).
Please let me know i am wrong.

Screen Field Color in Module pool

Hi Experts,
                  I have a requirement like based on the field content i want to change the color to the screen field. I have written code like below. But i'm getting dump.
        LOOP AT SCREEN.
          IF screen-group1 = 'G02'.
            screen-color = 'C411'.   -
> Getting dump here
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
Please tell me whether it is possible to give color in module pool or not.
Thanks and Regards,
nag.

Hi Sam,
             Thanks for ur reply. I have tried using only integers.But i'm not getting color. My code is below
        LOOP AT SCREEN.
          IF screen-group1 = 'G02'.
            screen-color = '411'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
color is INT4 type rite but we are passing only 3 characters to screen-color.But i didn't color to my field.

How to Add F4 Help To a Screen Field In a Module Pool Program

Hi Friends,
1. How to Add F4 Help To a Screen Field In a Module Pool Program?
2. How to select a single cell in ALV report output for interactive reporting ?
Kindly give code example.
regards,
Pradeep

Hi,
Try using the fm 'F4IF_INT_TABLE_VALUE_REQUEST'.
Refer the link below for selecting single cell.
alv
Reward points if useful.
Regards
Rose

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1. Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system. The requisition number will still be provided even if it fails to transfer to the backend.
2. Run FM BBP_PD_SC_RESUBMIT. The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

SRM shopping cart attachment to SAP not transferring

Hi SRM Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Note - I have posted the same issue in DMS thread as well
Cheers...Gopinath

Hi Guru's,
I am using SRM 7.0 and while i create an attachment in shopping cart and try to send it in ECC, the attachment is not reflecting .
Since we are using the latest version of SRM, we have used BADI BBP_CREATE_BE_RQ_NEW
(Method IF_EX_BBP_CREATE_BE_RQ_NEW~FILL_RQ_INTERFACE.).
I have also gone through the below link and tried the implementation :
http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_RQ_NEW-CreateRequisitionin+backend
Also, all ECC configuration are in place. However things are not come in place. Only the details are reflected but the attachment is not reflected in ECC.
If anyone can guide the correct way in SRM BADI along with ECC configuration (just to verify) will be a great help.
Kind Regards,
Kunal.

SRM shopping cart attachment to SAP not transfering

Hi DMS Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Cheers...Gopinath

Issue found with enhancement made by us in Class(SRM System). Same has been fixed. now its working, Thanks to all.
Cheers...Gopi
Edited by: Gopinath A.R on Mar 11, 2010 9:04 PM

Work flow not created for the Shopping Cart

Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

Hi,
what do you see in SLG1? Check the below t.codes
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Saravanan

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Custom field added in Module pool is not reflecting in SRM Shopping cart

Similar Messages

Maybe you are looking for