SRM 7.0 upgrade addon issues

I recently updated my ST-PI addon from 2005_1_640 to 2008_1_640 on my SRM system to match the ST-PI level on our SOLMAN system. Now I'm upgrading our SRM system from SRM 5.0 to SRM 7.0 and I'm stuck at the addon section of the upgrade. During the extraction phase I get a warning that says version 2008_1_640 is too high for the upgrade (>2005_1_710). I am able to continue past since it's just a warning. Once I get to the configuration phase I'm stopped to resolve the addons. my PI_BASIS is resolved by the addon dvd, but my ST-PI, ST-A/PI, and VIRSANH packages won't resolve. I have the install, upgrade, and supplemental files for ST-PI 2008/700 and 2008/710 as well as the needed packages for the other addons unpacked into EPS/in, but when I choose "Upgrade with Saint package" it doesn't see any of the packages.
Has anyone else had this problem and how was it resolved?
Thanks
Jeff

This fixed it for me.
Edit bin/IS_RANGE.LST file to include 2008_1_700.
         Ranges of ADD-ONs which are included in the Export
ADD-ON_ID       RELMIN            RELMAX
      PI_BASIS        2002_1_620        2006_1_710
      ST-PI           003C_40B          2008_1_700
FIX
      WP-PI           500_46D           600_620
Reset the upgrade by going back until the first step. Start the upgrade and then run SAPup stop ADDON_CHK to stop the upgrade before the ADDON_CHK to get rid of the error. ONce the check is performed it over writes the file again so at the stop between the extraction and configuration phases make the above change again and it if you have the 2008_1_700 addon in your EPS/in directory the upgrade will continue on and you'll be able to continue on.

Similar Messages

Does SRM/ROS or PPS addon support automatic generation of digital certifica

Hi Experts,
Does SRM / ROS or PPS addon support automatic generation of digital certificate for suppliers when they get registered in SRM? if not, is there any Badi or standard enhancement spot for the same?
Otherwise, how the digital certificates are communicated to suppliers to open the digitally signed documents from buyer side?
Thanks in advance,
Ranjan

Disabled the RTC Alarm power, left the computer off overnight. It did not power on. I'm gonna let it go another night or two then I'll consider this issue solved.
Anatolik I'll take a pint of Red Rocket Ale
2 Days now and no uncommanded power on. I'll consider this solved.
Last edited by Naruni (2014-09-22 16:59:52)

Things to look for in SRM 7.0 upgrade.

Hello Everyone,
We are using SRM 5.0 with Extended classic scenario and we need to upgrade from SRM 5.0 to SRM 7.0.
We are going to send RFP to different vendors for this upgrade project.
As a project manager what I should ask from different vendors before the upgrade?
What things I should look for from vendors before the SRM 7.0 upgrade or what questions I should ask to different vendors before the SRM 7.0 upgrade?
Regards,
Khushbu.

Hi Khushbu ,
This are the sample basic question for SRM upgrade .
SAP SRM Upgrade Questionnaire
Basic Information
    Company / Project Name
    Current Backend SAP R/3 or ECC Version / Plug-In Version
        - OLTP Backend System 1
        - OLTP Backend System 2
        - OLTP Backend System 3
        - OLTP Backend System n
    Current SRM Release / Plug-In Version
Components in SAP SRM
Please list which of the following Components are currently implemented (Y/N) and their release versions :
a) EBP
b) SUS
c) Live Auction
d) Requisite Catalog
e) CCM
f) MDM Catalog
f) IPC
b) XI
h) Enterprise Portal
i) BW (SRM Analytics)
j) ITS
k) CRM Middleware
l) HR Integration
m) Others
If the answer to any of the above is No, Are you considering implementing additional SRM components? If so, please list the components
Do you have any of the following scenarios :
a) 1 EBP client connected to Multiple backend SAP R/3 clients
b) Multiple EBP Clients connected to Multiple backend SAP R/3 systems
SRM Scenarios currently used
Self Service Procurement
Service Procurement
Plan Driven Procurement
Contract Management
Supplier Self Services
Strategic Sourcing - RFx, Live Auction
Other SAP Solutions
   Please List R/3 or ECC Modules Currently In Use
Have you implemented SAP Supply Chain Management (APO)?
If yes, what is your current APO Version
Have you implemented Product Lifecycle Management (PLM)?
If yes, what is your current PLM Version
   Please name any other SAP Add-ons or Industry Solutions in use
Basis Information
    Database release for current backend SAP R/3 or ECC system
    Operating System release for current backend SAP R/3 or ECC System
    What is your Hardware Platforms for current backend SAP R/3 or ECC system (e.g.HP, IBM, etc.)?
How many systems are in your landscape for current backend SAP R/3 or ECC system (e.g., Development, Quality Assurance, Production, etc.)?
     How large is your current Production Database in backend SAP R/3 or ECC system (in GB)?
Current SRM Database Size?
   Database release for Current SRM system?
   What is your SRM Hardware Platforms (e.g., HP, IBM, etc.)?
What is your current OS for the different components of SRM which are in use
Please explain the complete system Landscape for SRM (Use a separate sheet, if required)
SRM Data Conversion or Replication (if any)
   Business Partners
    How many vendor records are handled in SRM ?
Product Masters
    How many product master records are there in SAP R/3 ?
    How many product master records are available in SRM ?
Legacy Systems and their Migration
Any new data migration from legacy systems
System Enhancements
Custom Developments
    Complex
    Medium
    Minor
Custom Tables
Custom Java codes (e.g in IPC)
Badi's / User Exits
Screen modifications
z-transactions
Non-SAP External Systems and Integration issues
   Have you integrated any Non-SAP External systems to SRM ?
   List of Interfaces :
   1) EBP-Business Connector-WOI (IBM Web Order Interface)
   2)
   3)
Is SRM integrated to a Third Party Tax Engine e.g Vertex, Taxware
     Are you using email servers integrated with SRM ? If yes, which email system (e.g., Lotus Notes, Outlook, etc.)?
XI (Exchange Infrastructure)
List of Interfaces
1) P.O create
2) P.O Change
3) Order Acknowledgement
4)
5)
Project Management Tools used in Project
Are you using Solution Manager ?
Other Tools used
Size of Current SAP Team and Availability of SAP Resources
      What is the size of the existing SAP SRM support team : Any Consulting / AMS Team
      What is the size of the existing SAP SRM support team : Internal Team / COE
Training Requirements
    Please Explain the User training methods used in Previous ERP or SRM implementations.
    How many Super Users, and End Users got trained during SRM 3.0 implementation?
   Do you have additional training Requirements? If so, please describe.
   What testing tools are used currently ?
Project Constraints
What are the budgetary constraints for this project?
What are the resource constraints for this project?
What are the timeline (duration) constraints for this project?
Additional Comments
Is there any plan to upgrade any of the OLTP R/3 systems in the near future
UNICODE
Are your current OLTP R/3 systems Unicode complaint
Is your current SRM system Unicode Compliant
What languages are used in the current R/3 systems
What additional languages are required in the R/3 systems
What languages are used in the current EBP system (Core)
What additional languages are required in the EBP system (Core)
What are the languages supported in the HTML layer currently
What additional languages are required in the HTML layer
Hope this will be useful to you .
Thanks & Regards
Pradeep Kumar Dondeti

Differences between-fresh SRM installation vs upgrade

Hi,
Can anybody of you help me out with the following-
Differences between the two approaches
fresh SRM install vs upgrade with kernel upgrade and patch application. Which approach is better and why?
Your help will be highly appreciated.
Its very urgent.
regards,
kavita
Message was edited by: kavita agrawal

It depends on your Project Requirement. If you are upgrading your current version with any new version, then you will have to upgrade the system.
If you are implementing new version, then you will have install fresh and then upload the data from Old System.
You need to check your project. (Upgrade or Implementation)
Akash

Console Upgrade addon for Rev52.1 customers

HANA One team is happy to announce new addon "Console Upgrade" for Rev52.1 customers.
Features:
New Console changes for better usability (screenshots provided below)
Console Upgrade will enable future releases of HANA License update.
Packages supporting new Upgrade.
Steps to install addon "Console Upgrade"
Note: Instance will reboot after Console Upgrade.
License package only visible after Console Upgrade addon is installed.
1) Go to addon tab. There will be Console Upgrade package in New section. Click on Download and Install.
2) After you click install package will be go to installing section. It will take around 5 minutes to install and reboot the instance.
3) On admin tab HANA One version will be changed to Rev52.2.
New features visible on Console Upgrade
1) New packages will show up in New section.
2) Install HANA License package version 2.0 for continue using the instance beyond August 20, 2014. New License package have end date of July 11.2015.
3) On status page, indicators about two additional HANA servers will be visible.
Color codes for HANA servers:
Green - Particular Server is Up
Red - Server is Down
Blue - Available but not enabled
Grey - Server Not available on that HANA version.
4) Indicator if some process is going on HANA suggesting HANA coming up, stopping, backup or recovery.
Thanks,
Priyank

I've tried multiple times to install this Console upgrade and it fails with:
Error Message Transport : Volume creation Failed. Skipping next steps
My concern is not so much the Console upgrade but license expiration. My license expires in Aug 14 so I tried the other icon on the Addons tab for a license that expires in Sep 14. This also failed with the above message.
The license process for HANA One is not at all clear to me. Is it that the initial instance is loaded with a temporary
license and you need to install a permanent license thereafter?
My S number doesn't have sufficient authorization to create an installation on Service Marketplace and so
I can't get to where you request a permanent license key.
Paul

SRM 5.0 to SRM 7.0 upgrade - BSP to Webdynpro

Hi Experts,
We are planning to upgrade our current SRM5.0 system to SRM 7.0 system(Classic scenario). We have lot of customization in ITS using BSP.
How to convert all the BSP pages to Webdynpro screen? Also We will be using SAP Portal instead of old ITS in SRM7.0. How to change this?
Expecting your lights on it asap.
Thanks
Raaam's

Hi Raaam,
->Installation & Upgrade Guides
->SAP Business Suite Applications
->SAP SRM
->SAP SRM Server 7.0
Here you will find the correct SRM 7.0 information about upgrade:
Additional Configuration Material for SAP SRM 7.0
Graphics in Master/ Upgrade Master Guide - SAP SRM 7.0
Migration Guide - SAP SRM 7.0
Upgrade Master Guide - SAP SRM 7.0
Upgrade Guides - SAP SRM 7.0 SR1
Guide for Auto. Configuration: Connecting SAP SRM to SAP ERP
Hope this helps.
Regards,
Ivy

Bidding Engine / Cfolders available after SRM 5.0 upgrade??

Hi Experts
Recently we upgraded from EBP 3.5 to SRM 5.0(SRM Server 5.5), we only have the ABAP stack & no Java stack.Our users have suggested to use the "bidding engine" & Cfolders, so what I want to know is
a) Is bidding Engine / Cfolders installed by default during the SRM 5.0 upgrade?.
b) Is Bidding Engine part of Live Auction Cockpit(LAC) & we need to install the LAC separately?.
c) Do I need to install the Java stack for the bidding engine & cfolders?.
An early reply will be much appreciated & useful replies will be rewarded with points.
Thanks & Rgds,
Abhishek

Hi Abhishek,
a. Bidding Engine is part of SRM server and there for use when SRM Server is installed. You are ready to go, customize and use. cFolders are part of cProject Suite and need to be extra installed.
b. LAC is an own component supporting the auction and need to be extra installed. This is also Java based, why you need the Java Stack here.
c. no, Bidding Engine and cFolders are both abap based.
Kind regards,
Clauda

SRM 4.0 upgrade to SRM 7.0 - Error in Phase PARDIST_SHD

Hello,
I am upgrading the SAP SRM 4.0 / MSSQL 2005 / Windows 2003 (64 bit) to SRM 7.0 but I am getting this error in the phase PARDIST_SHD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DISTRIBUTION ERRORS and RETURN CODE in DS100310.SD1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEDA300 No active nametab exists for "CDBC_LANG_TABLES"
Long text:
    Cause
      Thee is no active nametab in the system, although an
      active ABAP/4 Dictionary object was expected.
    System Response
      None
    What to do
      Reactivate the ABAP/4 Dictionary object.
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CDBC_LANG_TABLES":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_ADJCONT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_ADJCONT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_HH_SRV_SYNC"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_HH_SRV_SYNC":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESSFLTT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_PROCESSFLTT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESS_FLT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_PROCESS_FLT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "IPCE_MON_NODES"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "IPCE_MON_NODES":    Action: "DNA"      Mode flag: "R"    Return code: "9"
What will I do now? How will resolve this issue? Please help me ASAP
Thanks
Gautam

Go to SE11, Menu->Utilities->Database Object->Check
            Menu->Utilities->Runtime Object->Check
If there are inconsistency, please follow note 211492 to adjust the inc
onsistency in original instance . But if these tables are obsolete,
for example doesn't exist in the system any more, you could also choose the option to 'Ignore' the error and
continue with the upgrade. But this is a BC-UPG issue.
Regards
Lauren

Impact of SRM 7.0 Upgrade on XI 3.0

Hi,
Soon we are going to upgrade our SRM 4.0 system to SRM 7.0 and MDM Catalog 3.0.
So is there any impact on XI 3.0, do we need to upgrade XI 3.0 to PI 7.0 or PI 7.1 to be able to do this.
Do you have any idea?
I have looked in the PAM at SAP but I don't come to any conclusion. Could you help me to sort this out?
Thanks!
Sarvesh

After going through "Upgrade Dependency Analyzer" ([_UDA_|http://service.sap.com/uda]) it is possible to upgrade SRM without upgrading XI 3.0 but then SRM7.0 should be without EHP1, but if we want to have SRM on EHP1 then XI 3.0 must be upgraded to it's higher versions.
Apart from my findings if anyone has done this before then please let me know if there are any known issues or points to be taken care during upgrade.

SRM 5.5 upgrade to SRM 7.0 with MDM

Hi,
Pl consider the following scenario and give your views.
Our client has SRM 5.5 running with SRM MDM 2.0 in their landscape. Now they wish to upgrade to SRM 7.0 without upgrading MDM.(We are upgrading through the parallel landscape).
So during the upgrade phase, we wish to connect SRM 5.5 and SRM 7.0 both to their existing MDM system for testing purpose. Is this possible?
PS : Parallel landscape is existing DEV environment will be copied and then upgrade the copied environment. We plan to copy only SRM Server and want to continue using the existing MDM, PI, Portal and TREX setup.
Regards

Hi,
No issue for testing purpose in test landscape. It is not production usage and production system.
Regards,
Masa

Upgrade addon

Hi All,
we want to upgrade our B1 std addon from B1 2005A to 2007A SP01 PL12. We used FA addon. How to solve the upgrade issue ?
Rgds,
RK

Hi,
if you are using fa addon, you need to upgrade the addon without using the addon upgrade if it is only the fa addon..
JimM

ITunes Match and iOS 7.0.3 Upgrade - Syncing Issue

I subscribe to iTunes Match for my iPhone 4S. However, I still sync photos, videos, etc from my computer. During both the update to 7.0.3 and 7.0.2, my phone has taken an interminable amount of time to sync after upgrading the iOS. During the last upgrade, i left the phone to sync overnight and found that it had deleted all of the music that I had downloaded to my device - or at least sort of. It was showing these songs as not on the device, however they seemed to still be taking up drive space. Many albums I had downloaded were now showing each track duplicated - one iTunes match version with the cloud next to it, and one downloaded to the device. After trying to remedy the issue many different ways, I found that thing that worked was to erase and restore the phone from back-up, thereby deleting all the music on my device and requiring me to again download songs from the cloud. I just finally got my music collection in good working order again with most of the music I listen to most recently on my device - and now with this latest upgrade it appears I will have to start all over again.
Has anyone else been having this issue? Is this a known problem? Am I doing something wrong?

nope no errors. it goes through the whole syncing processing, saying it's backing up the iphone and what not, but nothing happens on the iphone. i'm thinking i should just restore my iphone, right?

ECC 6.0 Upgrade related issue

Hi Gurus,
We have our project(SAP-HR) upgraded from 4.7 to ECC 6.0 version.
After data from prev system is shifted to the new system, I am facing an issue with smartform activation.
In ECC 6.0, I, without even making any changes to a smartform, tried to activate it. However it is not getting activated and giving error : Global Definitions: No component exists with the name int_tab.
However, int_tab is an intenal table of data dictionary type PERNR declared in the form interface. Using this internal table, data is passed from calling program to this smartform.
Note that this internal table is also mentioned in the input parameters in the Initialization tab in Global definitions.
This smartform is Active in the 4.7 version & the functionality is also perfectly working in that system and no changes have yet been made to the smartform in the new system(ECC 6.0).
One solution we hv discovered is renaming of the internal table, and using this new name in places where this internal table is mentioned which is cumbersome (and not very logically appealing as a solution) as this appllication has many smartforms using exactly similar functionality.
Looking forward to a cool solution.
Regards,
Rishikesh

Hi Anish
Thanks for the response.
Structure PERNR exists in ECC 6.
However number of fields has increased in the structure. (I am sceptical about this being the reason for not allowing activation)
How do I ensure that the global definitions is correct. Its just the same as in the previous system and moreover if you run the syntax check on global definitions it shows no error(Check successfully executed).
Regards,
Rishikesh

Mountain Lion Upgrade causing issues due to hard drive fault

I have a question about Mountain Lion crashing your hard drive. I upgraded my Macbook Pro 13' several weeks ago afer the release of Mountain Lion. The download took sometime before it completed it's download and completed without incident. Since that time I've had no issues with the softward update, my hard drive or computer.
However yesterday evening I went to use my computer and the screen after the Apple logo disappeared showed a circle w/a line thru it and turning gears just below it. After reading several forums and posts it seems that the computer cannot find a bootable disk to load up from. I do not understand this as I not changed the HD and the computer was working fine just the day before.
I tried to do a reinstall of the original OSX system (snow leopard) - it did download but after the computer re-started the system went back to the same screen w/the circle and line thru it. I then restarted computed hitting options to take me into the recovery / disk utility. From their I tried to verify and repair the HD - still same problem (circle w/line), I then just tried to reinstall Mountain Lion (same results).
WTH is going on - this was a perfectly good computer working fine & now I cannot get it to boot up or run at all? Could this be a software issue due to Mountain Lion or simply a bad HD? Any advice on how best to correct this issue would be appreciated. I use my laptop for dj'ing and have an upcoming gig in 2 weeks. HELP...

Heres the problem im having maybe it is similer
System MAC Book Pro Mid 2012 Dule hard drives 150 GB SSHD 500 GB in alternate slot
Updated Firm ware
Computer booted successfully
entered password computer reacted normaly color adjusted for my user settings
computer beeps repeatedly untill forsed shut down
reinstalled Lion worked fine again
updated to mountan lion
computer atempts to boot from the SSHD and fails
Boots to system diagnostics primary hard drive is invisable to the system
waited about a week
booted my system (at a new location)
Primary hard drive reapeared
Boots to system diagnostics
reinstalled Lion worked fine againupgraded to mountan lion again to test a theory
computer atempts to boot from the SSHD after instalation and fails
Boots to system diagnostics primary hard drive is invisable to the system
So its Back to Square one any thoughts coments or general advice?
- Thanks

Mavericks 10.9.1 Upgrade = Audio issue (lost 5.1 through HDMI)

Hello guys and gals,
I've Macbook pro 15" retina connected as follow
Macbook Pro -> Sony HT -> LG LED TV (55LA7400)
The connection is made via HDMI port. Everything was working fine, no issue when I was using previous OS. Apps such as XBMC, etc was able to output 5.1 fine.
I just upgraded to 10.9.1 and experience Audio issue.
With TV OFF: I was able to see the 5.1 Selection via Audio Midi Setup. Using the built in test feature, was able to check all 6 speakers fine.
However, as soon as I turn on the TV, Macbook screen flickers (as usual when ie tries to recognize the TV and enable Video out) I can only select 2CH via the setup.
This apparently, wasn't the issue prior to the upgrade.
Please advise,
Thanks

I should have said - I tried that earlier but I just get:
'This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.'
My 17 inch Macbook Pro is pretty old (2009) and I took it over from my son 3 years ago so I wasn't involved with the initial installation.
Thanks.

SRM 7.0 upgrade addon issues

Similar Messages

Maybe you are looking for