SRM 7.02 DUMP with user ID WF-BATCH

Dear Experts,
recently we are facing issue with dumps in our system with user ID WF-BATCH and the dump is due to TIME_OUT.
The description in ST22 is: The program "/SAPSRM/CB_WF_PROCESS=========CP" has exceeded the maximum permitted run time without interruption and has therefore been terminated.
Due to this we are also facing performance issue. Does it looks like Functional issue?
Please suggest what can the issue be and how to resolve
Thank you.
Regards,
Abhishek

Hi Laurent Burtaire
Information on where terminated
    Termination occurred in the ABAP program "/SAPSRM/CB_WF_PROCESS=========CP" -
     in "MAP_LOAD_FROM_DATABASE".
    The main program was "SAPMSSY1 ".
Thank you for your help.
Regards,
Abhishek

Similar Messages

Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data

Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
Don

Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
        l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
        l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
        l_listobject LIKE abaplist OCCURS 10,
        l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
        lw_object_hd_change LIKE sood1,
        l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
      compressed_size = l_compressed_size
    TABLES
      in              = <fs_table>
      out             = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      object_hd_change = lw_object_hd_change
      object_type      = 'RAW'
      owner            = sy-uname
    TABLES
      objcont          = l_message_content
      receivers        = l_receiver_list
      packing_list     = l_packing_list
      att_cont         = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
    Error when starting a Remote Function Call.
What happened?
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    Status of connection.... "RFC DRV=??? ???"
    Internal error code.... "RFC_IO4"
    Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
    Program                                 SAPMSSY1
    Include                                 SAPMSSY1
    Row                                     266
    Module type                             (FORM)
    Module Name                             XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

Can no longer logon to EM DBA-Studio 8.1.7. with user SYSTEM

Hello
my 8.1.7 Enterprise Edition Database shows some "strange bahavior". I can no longer logon to Enterprise Manager Console with user system. (Message: This Application needs more privileges...) But the user system still has the same system privileges as before when it worked fine. So what could have gone wrong?
The logon with user sys as sysdba still works.
I can still logon with any user in SQL Worksheet and SQL Plus for instance.
I have checked for any data loss......but all data still seems to be available. I checked for it with desc and select commands.
BUT.....I can no longer post a "select * from cat"
(Message: Table or view does not exist !)
The database is in archivelog mode in case a recovery is necessary.
Before the "crash" a normal user schema dump was exported without any problem. But that shouldn't have triggered off the problem!?
Any help would be greatly appreciated!
Thank you very much for any hint.
Stefan
PS: My user SYSTEM already has the DBA and the SELECT_CATALOG_ROLE but still is no longer able to logon in DBA-Studio!
I assume it is a more serious problem since none of my users can still perform a "select * from cat" which should always be possible!

Stopping the jrew process is what i do anyway, but that doesn't seem to be e very elegant way of working with DBA Studio. What is the reason for this behavior?
Thanks to anyone who can give me a clue

Run with User's rights not working as expected

I have a VBscript that runs the Quest Client Profile Updating Utility for migrating Outlook e-mail profiles to a new Exchange Server. For this tool to work it must be run using the User's security context when the user is logged onto the computer.
What I have found is that the script fails to run because SCCM is running the script with elevated privileges. The program is set with 'Only when a user is logged on' and a run mode of 'Run with user's rights'. The advertisement is set to run from
a distribution point and has two mandatory re-occuring schedules (Logon, and at 6:00 a.m. every day).
To test what is happening I created a separate Program that has the same program settings but only runs 'Cmd.exe /k echo' for the command line. If I run this SCCM program as a user who is not a member of the local administrators group
I can execute privileged programs like regedit.exe. If I run the Command Prompt from the Start\Accessories folder and try to run Regedit I receive an 'Access denied' message. It appears SCCM is running with elevated privileges.
Does SCCM run a program with elevated privileges? How can I make a program run without elevated privileges.
thank you for your help.

Actually I ran into a similar issue today trying to gather info about mapped network drives and found this thread when trying to troubleshoot it. Here's a summary of what I've done:
I have an SCCM package set up to run a script to dump the users' mapped drives to a text file. The program is set to run only if a user is logged on and to run in the logged on user's context. UAC is enabled. For users who are members of
the local Administrators group, the resulting text file was empty, as if no drives were mapped. Running the script manually (not via SCCM, just double-clicking the script) populated the text file with the expected results. So the script works correctly.
I suspected SCCM was running the package elevated, since drives mapped in the non-elevated context aren't visible to the elevated context.
To test, I created another package & program that runs a command I know requires elevation (ipconfig /registerdns) and pipes the output to a text file. I configured it in the same way, and for users who are in the local admin group, the text file results
indicate that the command ran successfully (which means it ran elevated). If I take the user out of the local admin group, making no changes to the package, then run the package again, the text file results say "This command requires elevation."
So, it appears SCCM is running with the highest elevation level for which the user has rights. I guess this makes sense, and it's not doing anything the user wouldn't normally have rights to do, but it does cause a problem when a program needs to run
under the user's non-elevated token. Any suggestions?
Thanks,
Matt

How to assign contact person with user id to vendor via upload

Dear All,
We have successfully uploaded external business partner (Vendor) from ECC6 to SRM5.0 via BBPGETVD. So vendor is available in PPOMV_BBP.
Now we would like to assign the contact person with user ID to this vendor so that he can logon to our system and update Bid.
If we create contact person (employee) via "Manage Business Partner", system provides the option to create contact person and User ID under "Employee for Business Partner".
But we can create contact person one by one, if our client have 600 vendors from ECC and already transferred to SRM.
How to rapidly create and assign contact person to all vendors ?
Who have any ideas for upload via text file or excel sheet please advice me.
Best Regards,
Theerat.

Hello Theerat,
Try these FM
BBP_CREATE_CONTACT_PERSON
BBP_CREATE_CONTACT_USER
muthu
Edited by: Muthuraman Govindasamy on Oct 7, 2008 9:16 AM

Error in flatfile load - date not compliant with user date settings

Hi,
I want to load a flatfile into BI 2004s.
so i created a flatfile datasrource, transformation etcetc.. all fine so far.
the file contains 2 dates in format YYYYMMDD and are loaded in DATS infoobjects (also yyyymmdd).
but when i load the data into the PSA it immediatly dumps with error message "19771009 does not match the user-dependent date format --> long text"
the long text sais 19771009 does not correspond to the date format that is assigned to the current user BIWREMOTE. which is correct.. cos there date is DD-MM-YYYY
when i change the date format in the user settings to YYYY-MM-DD it works fine...... in the forground. In the background,whatever i do, it dumps with this errormessage.
so i have 2 questions:
since when is, while loading to the PSA, the date format linked&checked with the date format in the user setting? i cannot recall ever having this issue.
did anyone encounter this problems.
grtz
rogier

Hi ,Ronald Silberst,R. Poelmann,
I am facing similar kind of problem, Could u please tell me how you overcome this problem. How to set and adding the RSDAT convesion routine into the datasource definition.
Appreciate your help . Can any one have some idea please share.
Regards
Ramesh

SDCCN - Dump with "DYNPRO_SEND_IN_BACKGROUND"

Hello,
I'm facing an error in SDCCN functionality. When checking Early Watch Alerts with transaction DSWP I get a red alert flag with a system. When trying to reach system with RFC connection, I get an error message "Dynpro without connection to user".
In target system I get a dump with runtime error "DYNPRO_SEND_IN_BACKGROUND".
I found a few notes but none of them in relationship with SDCCN (49730, 1551958, 1520800).
Does anybody know this problem and can help me out?
Thanks in advance,
Julia

Hi Julia,
This error is usually raised when a non-dialog user is specified for dialog processing.
On the red flag icon in DSWP, that would be the Trusted RFC you'd be using, so for that RFC, in SM59
what kind of user is being specified. Have you tried checking the box use current user?
In Solman in DSWP in the client tab you can also test the Trusted RFC and ensure the smread and smtrusted RFCs are speciofied for Data COllection and Read Analysis.
Regards,
Paul

SRM Local Purchase Order with both a standard line item and limit item...

In SRM is it standard that you can create a local purchase order from the sourcing cockpit that contains a mix of limit items and standard items?
I know this can be done in R/3.

Paul,
I am a functional/business person, and we are running SRM550 in extended classic, linking to ERP backed.
From our business point of view it makes little sense to mix a limit item with one or more standard catalog item. SAP standard SRM 550 actually stops our users from doing this.
For those who are not aware of the differences I will elaborate.
A standard item is either from a Free Text entry process with the process being completed by a professional purchaser or a catalog item either internal to SRM, or maybe from an external website.
Limit orders are value based and are mostly used for the payment of Utility bills, or for services. We don't use services at all.
In our business we use limit orders for an Electricity Bill for example.
When the user confirms a limit order the quantity should always be 1 and the user enters the value of the item.
The Invoice entry team then needs to match the Invoice to the GR line. It's at this point that if you have Limit items and standard items mixed our invoice entry team could run into problems.
We are aware that it is not recommended practice for Limit orders to have GR and if you can avoid this step then you should. Unfortunately our operating model insist on everything being confirmed and in the case of limit orders this can cause us invoice blocking issues.
Limit orders are normally set up to run for a full FY so the addition of standard catalog items to a limit order makes little or no business sense.
If a user added two limit items to a shopping cart for the same supplier our system would produce two PO's for the supplier to use.
We actually avoid transmitting Limit order details to our suppliers as this would indicate the maxiumum value they could invoice us for, businesses just don't do that. We just send them the PO number and description of the item. This provides them with a PO Ref number to puton their invoices.
As we are still running SRM 550 maybe someone with SRM 7 knowledge would care to expand on this analysis?
Hope this helps?
Allen
PS We don't use the Sourcing Cockpit, just read your earlier response
Edited by: Allen Brooks on Mar 3, 2010 3:22 PM

Error in creation of text indexes and synching with user datastore

Hi
has any body encountered error in creating text indexes on 9.2.0.1 with user datastore. you can create them only with no-populate option. however once created after checking-in documents the indexes cannot be synched using ctx_ddl command manually.

The only thing that I have seen similar to this was worked around by updating the column to itself, then sync...not sure if this is the same thing you are running into, but it may be worth a try. See the Oracle Text FAQ - take special note of step c:
===============================
Creates the index without populating it.
SQL > CREATE INDEX GLOBALINDEXEDBLOB_I
ON ODMM_CONTENTSTORE ("GLOBALINDEXEDBLOB" ) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS (' stoplist CTXSYS.DEFAULT_STOPLIST storage IFS_DEF_STORAGE section group IFS_SECTION_GROUP wordlist IFS_DEF_WORDLIST memory 32000000 filter IFS_DEF_FILTER format column FORMAT charset column CHARACTERSET lexer IFS_GLOBAL_LEXER language column LANGUAGE nopopulate');
b. Mark globalindexedblob column in every row as updated.
SQL > update odmm_contentstore set globalindexedblob = globalindexedblob;
c. Sync the index. If you skipped the previous step, then this step does not index content that existed prior to index creation in step a.
SQL > exec ctx_ddl.sync_index('GLOBA[i]Long postings are being truncated to ~1 kB at this time.

Short Dump with ALV Report

Hi
I have one Zreport which gives the result in ALV form.
After getting the result(1 row with 33 columns) when I tried to export the ALV results to spread sheet using the option : List-> Export-> Spread Sheet OR by click on Excel icon in the display screen,I'm getting the short dump with the description "No more storage space available for extending an internal table" .
After analysis ,find that dump is raising in the FM : F4_GET_RESULT of Include Program : LSDH3U03.
Can anyone provide us some clue .
Thanks & Regards,
Sreeram

Hi,
If the display is in ALV grid format, then you can try another approach to save the data in a spreadsheet.
- Right-click on any output cell.
- Select 'Spreadsheet' from the drop down list
- radio-button 'All available formats'
- Excel (In existing XXL format)
Thanks!
VS.

MRP Run with User Exit key for Follow up material

Dear Gurus,
I want to run MRP only for followup materials by using User exit key. For example i have a material X(with discontinued Indicator as 1) and it's follow material is Y.
So we have a user exit key as ZFL, with coding as shown below. Now when i run MD01 with user exit key ZFL and parametre as 1, it only runs MRP for material X and not for material Y. What else we need to do so that when i run MD01 with user exit key ZFL, it shoudl consider both X and Y.
WHEN 'ZFL'.
DATA : BEGIN OF ITAB5 OCCURS 0,
KZAUS LIKE MT61D-KZAUS,
END OF ITAB5.
TRANSLATE USER_PAR TO UPPER CASE.
SPLIT USER_PAR AT ',' INTO TABLE ITAB5.
IF ITAB5[] IS INITIAL.
EXIT.
ENDIF.
CLEAR: NO_PLANNING, STOP_PLANNING.
READ TABLE ITAB5 WITH KEY KZAUS = MT61D-KZAUS.
IF SY-SUBRC <> 0.
NO_PLANNING = 'X'.
ENDIF.

Hi Kumar,
You can use either MRP Type, MRP Controller, MRP Group in this user exit to control the MRP run. For these set of Materials you have to assign any of same value or at least differentiate these material from other material. Then only you can control the MRP by using this user exit even though if you use different MRP Group and MRP Controller. In User Exit, you may have to add your dependent material's MRP Group/MRP Controller. Make sure that these set of materials are different than all other materials.
If you don't have any plan to run MRP for other materials then as per Ajit suggestion you make that material's MRP type as "ND". But, in your business case they may want to activate the MRP for all the material not now but may be latter.
Thanks

Open PO's with user wise list

Hi experts,
Open PO's with user wise list ?
regards,
Sanju M S
Edited by: Csaba Szommer on Dec 31, 2011 9:22 AM

Hi,
I am not aware of FM. But I know the tables which can give the required inforamtion to you.
Pass item GUID of RFx response to CRM_JEST-OBJNR. If it has a record with STAT=I1113 then it means that the follow on document created.
Further you can find the meaning of status in CRM_JEST, in TJ02T table.
Hope it will help you.
GH

Background Job with User Name

I am trying to submit report program in background job. I want to submit it with specific user name so I am submitting with user name as 'ABC' as below
data: user type sy-uname.
user = 'ABC'.
SUBMIT z_program AND RETURN
             WITH matnr = matnr
             WITH werks = werks
             USER user
             VIA JOB jobname
             NUMBER jobcount
But it creates job with current user(sy-uname) running the program and not 'ABC'. How I can change it for specified user?

SUBMIT z_program AND RETURN
WITH matnr = matnr
WITH werks = werks
USER user
VIA JOB jobname
NUMBER jobcount
AND RETURN.    "you forgot to return back
Of course the user should be the one existing in the system. I guess there is no such ABC. Find the one which exists (use i.e. su01).

Not able to run the job with user id - is

Hello experts,
We have problem.
Every day we run the job.
( the job contians two programs called ZTIBCOPRG and J_5HJSTP )).
I would like to know why the above job is running with the user ID TIBCOADM. Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
We changed the user to TIBCOUSA and the job would not run.
We have changed the user back to TIBCOADM. It is running.
KINDLY HELP ME WITH YOUR VALUABLE inputs. YOUR HELP WILL BE HIGHLY APPRECIATED.
I have checked for both users in AGR_USERS table.
The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
Thanks and Regards,

Hi,
after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
There you may get some information where it is failing.
Sudheer. A

SRM 7.02 DUMP with user ID WF-BATCH

Similar Messages

Maybe you are looking for