SRM, BBP_SC_TRANSFER_GROUPED Auto grouping by Plant

Hi,
We have a requirement to add Plant as a grouping criteria in program BBP_SC_TRANSFER_GROUPED to combine requisition in SRM system. The standard logic only does the grouping based on Vendor and Purchasing group.
Do you know any solution to the above?
We are suggestted with some BADIs, such as BBP_GROUP_LOC_PO and BBP_BS_GROUP_BE.
Please let me know  how to achieve that if you worked the same requirement.
Thanks for your inputs.
Regards
Vindy

so you want to group SC items into requisition based on plant as well... right?
you can do that with BBP_CREATE_BE_RQ_NEW or BBP_BS_GROUP_BE.
if you are going for BBP_BS_GROUP_BE, then method name is GROUP_RQ_BACKEND. here keep same CT_ITEM-refnumber
for all the items you want to be grouped.
just read the documentation and you will be fine.. .

Similar Messages

  • Report for monthly sales(sales office wise,sales group wise,plant wise)

    Please send the Report for monthly sales(sales office wise,sales group wise,plant wise)  with T.CODE.,

    Hi
    As per my knowledge there is no Standard Report in SAP based on sales office, sales group. and plant.
    You may create your own report using MC18,MC21 and MC24.... Otherwise ask your ABAPer's help...
    Muthu

  • Grouping of Plant for PRD

    Hi ,
    Can any body suggest some thing on below business scenario.
    As per standard SAP.
    E.g We have Placed one P.O to Vendor V1, and received the Goods and DoneIR , If latter we do Subsequent Debit / Credit, system will post the
    accounting entries based on available stock.
    If stock is there, It will take Cr/Dr to stock and DR/Cr to Vendor for
    Subsequent Credit / Subsequent Debit.
    Here, we have received the goods e.g in Plant XX10, Now we have done
    Intra company stock transfer to let us say Plant YY10.
    Latter we got Subsequent Dr/ Cr from Vendor for Plant XX10 against the P.O.
    As the stock is not there in Plant, it is bringing PRD account.
    Is there any exist in standard, which will, check the group of Plant (
    e.g XX10 and YY10 ) and if stocks is there it shouldn't post to PRD.
    It should hit to stock account of available stock in the group of plant.
    Yours valuable input will be highly appreciated.
    Regards
    Sunami

    IT depends on how this process is to be done. 3 Ways are possible which are listed out below.
    Scenario - 1:- both the plants in Same company code. so you will not encounter PRD account.
    Scenario - 2 :- Use Valuation Grouping code, group together both plants under 1 valuation grouping code, when you do material transfer between these 2 plants, the Accounting Entries would not take place.
    Scenario - 3:- Use a Z program and User Exit for posting to PRD of a different area.
    Thanks
    Raghavan

  • Ungrouping auto-grouped text in a PDF form

    After I have created a form in FormCentral and import it into Acrobat Pro to further edit (I need it to be one page, so I'm moving fields around and compressing space), some of the text is auto-grouped into larger text boxes. For example, I have a name field above a phone number field, the "Name" and "Phone Number" titles are put into a single text box rather than two separate ones. Is there a way to avoid this so I can move the titles separately or do I need to cut and paste a bunch of times to put them into their own boxes?
    Thanks.

    You can't change the way Acrobat interprets the text structure of the file.
    The bottom line is that PDF files are not really meant to be edited in such
    a way, and Acrobat is not a word processor or layout editor, so don't
    expect it to deliver too much on that front.

  • Nesting of Rules for Auto Group (Role) Membership Rules in OIM 11gR2

    Does anyone know how to nest rules for auto group (role) membership in OIM 11gR2. The General rules in Design Console are no longer used for auto group membership and the rules that can be configured in the Role properties cannot be nested as far as I can see.
    Any info is appreciated.
    Thanks!

    My mistake... this is possible in the web ui.

  • Restriction of sales office, sales group and plant

    how can i restricts sales office, sales groups and plant for the different user.
    there is no authority check at inquiry, quotation, sales order
    please guide me
    thanks

    Dear varada rajan
    If I understood your explanation correctly, while creating sale order via VA01, input options for Sales Office and Sales Group are not flowing and you want to flow these fields in VA01.  Am I right ??
    If so, go to VOV8, select your sale order type and execute.  There you can see a field "Screen sequence grp." under the tab "Transaction flow".  There maintain AU and save.
    Now go to VA01 and check.
    thanks
    G. Lakshmipathi

  • Authorisation for transfer of material from group of plants to another.

    Hi experts
    We need to control mvt of goods from group of plants to another group of plants by the same user. The group of plants may be combination of multiple plants or single plant also. Transaction to be checked is MB1B with 541/412 mvt. Basically this requirement is to check transfer of exempted material to Non-exempted material from the point of VAT implication. Can any body share your thought.
    rgds
    Raghu Shetty

    Hi,
    i still have some concerns about the creating new materials solution because we have to create the following relevant things:
    SD: condition record
    MM: infor record
    PP: new BoM
    we have 25 materials which will change profit center, there're a lot extra works we need to do.
    Is there any other way we can try?
    Regards

  • Kde update 4.9 & problems with auto-grouping windows

    Since upgrading kde to the latest version (4.9), I'm having problems getting the window manager to automatically group windows as it used to. It should group windows of okular, for example, by default, but no matter what I do, I can't get this to happen.
    I've tried modifying (basically reasserting) the settings for okular in the "windows rules" settings (under "more actions > window manager settings". I've also tried doing this via the new option "more actions > special application settings" which creates a second entry in the list of window rules. I basically have "autogroup with identical" set to "force" "yes" which seemed to do the trick before but no longer seems to have any effect. It is still enforcing placement and geometry for okular windows so it can't be that it isn't recognising the windows as ones to which the settings apply. It seems to be specific to the grouping stuff.
    Does anybody have any suggestions? The config seems to have changed a bit and I'm thinking I must have missed some new setting somewhere but I just seem to keep going in circles.

    Unfortunately, I am using Oxygen window decorations already.
    I do have the "Attach as tab to" option but it is a pain to have to group every window manually.
    I've discovered that auto-grouping does work for windows opened on the same virtual desktop but if I open a new okular window from konsole, say, I get a new window on that desktop rather than having it end up attached as a new tab to an existing window on another desktop. I can work around it by having all okular windows start on a standard desktop but this is a pain as I didn't want okular to behave this way.
    Thanks for the suggestion, though. I found a lot of my window behaviour got messed up by this update. Mostly it's just a question of resetting things but this one has me stumped.

  • Chrome Email "Bob Rohrman" Auto group

    Does anybody else have problems, with Bob Rohrman Auto group ADs, blocking ability to handle Email abilities? Such as moving text up and down, or, getting full screen?

    I believe the problem is with the designer, handling Chrome. When I use Internet Explorer, which I was forced to have besides Chrome, there isn't a problem. It looks like the top of the AD goes above, where it should. Besides Bob Rohrman, there is one other AD that does that. Thanks for your help, but from now on if I see, the problem I exit and go back using Internet Explorer.

  • Difference between MRP group and plant parameters

    hai friends,
    please let me know, what is the main difference between the MRP group and plant parameters?,
    what are the extra activities or features with one, when compare to the other?.
    Edited by: Mourya.v on Sep 22, 2010 6:36 AM

    Dear Mourya,
    Why to assign MRP group? - If planning for each plant is not specific enough for your purposes and you would like to assign
    control parameters that differ from the control parameters defined for the plant to certain material groups.
    1.For all materials without an MRP group, the system uses the plant parameters that is the settings present in OPPQ, or the
    entries in the initial screen of the planning run.
    2.For all materials with an MRP group, the system uses the parameters recorded in the MRP group that is the settings in OPPR.
    3.The MRP group is an organizational object that can be used to allocate special control parameters for planning to a group of
    materials. You can maintain MRP groups if planning control per plant is not precise enough for your requirements and you want
    to allocate certain material groups different control parameters from the plant parameters. For this purpose, MRP groups are
    defined with these specific control parameters and are assigned to the material in the material master record (MRP 1 screen).
    4.The MRP group, groups material from the material requirements planning point of view to allocate them control parameters for
    planning.The control parameters include the strategy group, the planning horizon and the creation indicator for the planning run.
    Also check this link [Settings in OPPQ & OPPR|oppr and oppq]
    Regards
    Mangalraj.S

  • Can auto Grouping PRs into RFX and also addition of custom fields of PRs

    We are implementing SAP SRM 7 Strategic Sourcing .Our Deployment mode is classic.
    PR is created in ERP .PR is having custom field called as expected cost.
    We will process PRs in SOCO .
    Question 1 :
    We would like club PR into Rfx based on criterias.I Would like to know how we can do so .
    Consider case I have 3 PR as PR1 , PR2 , PR3 .If criteria is matching then I would like to club them as
    PR1 + PR2 = RFX.
    Question 2 : While clubbing PR's and forming one Rfx from it , I would also like to add custom field expected cost
    so  exp cost 1 (PR1) + exp cost 2 (PR2) = target cost (Rfx ).How I can achieve this ?
    Where I can write code .Would like to know such BAdi which will be helpful.
    Question 3:
    Can we Club PRs automatically and form Rfx? or Does SRM support only manual Grouping of PRs ?
    If we can automatically club PRs based on criteria and form one Rfx ,How can it be done ?
    << Please do not offer points >>
    Edited by: Rob Burbank on Sep 28, 2010 4:18 PM

    Regarding your Question 1 - if targeting manual grouping of items, you could do so by going through sourcing cockpit, select the proper items and group them together and create one RFx. This requires your own judgement with regard to grouping criteria.
    Regarding your question 3, which is automatic grouping, you could configure first via IMG "Define sourcing for product category" by defining a set of product categories as "Auto. Grouping and creation of Bid Invitation item w/out source of supply". This would group SC items automatically for one RFx. However, if you need to restrict the grouping with further criteria, you could implement BADI BBP_TRANSFER_GROUP, which is to split the automatic grouping by the system.
    Your question 2 can be achieved by implementing BADI BBP_DOC_CHANGE_BADI for RFX (BUS2200) (by referencing its parent PR information).

  • SRM recipient role restricted to plants

    Hi
    In SRM the organizational levels available in authorizations to the 'Recipient role' consist of 'Purch.org' and 'Purch.grp'.
    How do I restrict the role to certain plants?
    I tried adding the authorization object M_BBP_IM_1 to restrict actions according to plant but anyone with the recipient role can still see all purch.orders.

    Hi
    Sorry for the delay - I had to get back to my costumer to try out your suggestion.
    Unfortunately it does not solve the problem. The goods recipient role does not automatically check for Plant. - then I would have to use the BADI too - and it would take a lot of maintenance, since we eventually will have 12 different hospitals with each 3 plants.
    I need to create som recipientroles, that can be restricted to different plants.
    Do you or anyone?? have guidelines to creating an authorization object, that restricts that role to certain plants?
    BR
    Astrid

  • Update Plant details from MM to SRM for an already replicated plant

    Hi All,
    In order to replicate all plants from MM to SRM, we use program - BBP_GET_LOCATIONS_ALL
    In order to replicate selected plants from MM to SRM, we use program - BBP_GET_LOCATIONS_SELECTED
    In case a plant has already been replicated from MM to SRM, and subsequently the plant address details are changed in MM,
    what is the process to reflect the changed plant details in SRM side? Is there a separate program for this?
    Please advise.
    Thanks in advance,
    Ruchika

    Hi
    LOCATIONS reports helpful to bring plant data into SRM as a business partner.
    even you do run a report again you maigh get a report that plant BP updated successfully in SLG1 log.
    you can test them in develoment box.
    but we dont deal with any processing in EBP other than plant number.
    Plant address is not a ship to address as in EBP . Ship to address attributes helps for f\delivery address.
    i believe no harm in plant ADDRESS data in srm.
    BR
    Muthu

  • Assigning Purchase groups to plants or Purchase Org

    Hi
    Can the purchase groups be assigned to plants or purchase organisation? Or we can use the authorisation managment to restrict the user of one group in one plant to use purchase group of another plant?
    Regards

    Hi,
    You can not link Purchase Groups directly to Plant or Purchase Org.
    You can use following authorisation objects to restrict the Purchase Groups;
    M_BANF_EKG - Purchasing Group in Purchase Requisition
    M_ANFR_EKG - Purchasing Group in RFQ
    M_BEST_EKG - Purchasing Group in Purchase Order
    M_RAHM_EKG - Purchasing Group in Outline Agreement

  • Updating Loading Group on plant record using BAPI

    I am using BAPI to extend to a plant
    BAPI_MATERIAL_SAVEDATA
    I am passing                     
      plantdata-loadinggrp   = wa_plantdata-loadinggrp.
      plantdatax-loadinggrp  = 'X'.
      plantdata-plant        = p_p_plant.
      plantdatax-plant       = p_p_plant.
    At the time of the BAPI call the data is in the table
    All other plant data gets created except for this loading group field (Sales/general plant)  and only when I am usign a specific plant.   It works fine for other plants
    Anybody know any config or setting related to this ?

    solved it

Maybe you are looking for