SRM local PO CHANGE generates backend errors? But then dissappear?

Hi there,
I have a strange situation where if I go CHANGE an SRM local PO that has already been ordered, let's say I increase the quantity or price and click the "CHECK" button I sometimes get errors like the following:
This purchase order has back-end errors
No instance of object type PurchaseOrder has been reated. External reference:
PO header data still faulty
External document number 3200000240 already assign d
But the really weird thing is if I click on check again a couple of time the errors eventually dissappear and I can order the PO.
And this error seems to only happen sometimes...very ad hoc.....
I do have the BBP_DOC_CHECK_BADI active but the code inside the custom development has NOTHING to do with these errors above.
Why on earth would it be trying to assign that PO number in the backened anyway if it is already created in the backend?
And ideas on this strange problem?
NOTE: We are on SRM 5.0
Any help would be greatly appreciated
Thanks
Lynton

Hi there,
The RZ20 monitor is active BUT these errors do not appear in there at all.
As I said I can literally click the button "ORDER" a couple times and the errors just "dissappear", very weird.
I think it is a LOCKING issue, I have seen this thread Purchase Order Modification: External Document Number already assigned but am still trying to work out if it is a workflow lock in table or SM12 type lock.
Thanks anyway
Lynton

Similar Messages

I have changed my Apple ID, but then I cannot access all the apps and books I purchased in the past with my previous ID? How can I recover my purchased items?

I have changed successfully my Apple ID. But when opening iTune with my new Apple ID, I don't see all the apps and books I purchased before changing the Apple ID. I appreciate if someone would let me know why and how can I access to my purchased items again.
Thanks.
Kimchieu

If you are referring to an iDevice, sign out of your new Apple ID and sign back in with your old one - they should all be there.

HT201210 Can anyone tell me exactly what Error 23 is?! WHY does Apple assign an error # but then NOT explain what that is?! I'm trying to restore an iPhone 3G. Please help! Thx.

I CANNOT restore my iPhone, so now I'm stuck with a useless iPhone because I can't complete Restore - because Error 23 keeps coming up! Ugh...it bugs the heck out of me, that Apple assigns an error number without explaining (a) what that IS, (b) taking or redirecting to a SPECIFIC troubleshoot page for THAT error. I've wasted lots of time doing all the stuff already suggested but Error 23 persists! Please help or I've just lost my lovely old-design 3G, which I really am loathe to give up for one of those ugly new boxy too-long slim things... (Which cost $200, 2 boot!)

Thx BUT =as-said, I've tried ALL the suggestions - including reading through the link you just suggested/posted (but just for good measure, i've just re-read thru it again!). I noticed from this list the first time i read thru it, that Error 23 didn't appear anywhere on this list of various (numerous!) error numbers. So/ergo, i still don't know (a) what exactly this error IS, (b) how to fix/get past/resolve it.
I don't have an Apple store anywhere near me. Even if I did, I wonder whether they would (a) be willing to (b) able to fix it @ the so-called Genius bar? Any thoughts on this? (Obviously, if there were an Apple store nearby, I'd go there & try; as-is, it would entail an extra trip & an expense costing as much as buying a new iPhone!)

Does the computer lock me after a certain amount of failed password attmepts, even when i finally have the correct password? recently changed root account password, but then forgot today and when tried again didn't work. if so, how long does lock last?

Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.

giselafromclongriffin wrote:
Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.
Do this:
1. Reboot
2. Hold apple key + s key down after you hear the chime. (command + s on newer Macs)
3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. After rebooting you should have a brand new admin account. When you login as the new admin you can change the passord on the old one.

PXE-E61 error, but my HD is OK

My laptop is a Satellite A55-S306 which, until yesterday, has given little trouble in the past. I have not added new hardware, nor have I modified the boot order.
I am getting a PXE-E61 Media Test Failure when I power up the machine. It also says that the \WINDOWS\SYSTEM32\CONFIG\SYSTEM file is missing or corrupted, but this message only appears after the PXE-E61 failure message. The problem occurred while I was out of town and the system hibernated, but it probably came awake to service an automated JungleDisk backup. When I returned, the system was powered up with the "SYSTEM file corrupted" message on the screen.
I don't remember with certainty how to get into the boot order menu, and have not been able to. I am able to get into the pre-boot setup menu using Esc, and it has lots of options, not including boot order. I have tried various F keys, including F2, F8, F10, F12, but these seem to do nothing.
In any case, I think the boot order is working, because I am able to load a CD and boot from it.
I have SeaTools on CD, and I used this to test the hard drive (long test). It passed with no errors detected, so I believe that the disk drive is available and the formatting is OK.
I also have an Acronis recovery CD, with their Disk Director and backup applications on it. Booting from this, I am able to see the C: partition on the hard drive. Using the backup application, I am able to explore the various directories and they look normal. I even commanded a full backup of the C: partition to an external USB drive, and this completed without error.
About the only thing I can think of is that there is a problem with the boot sector on the hard drive, or the Windows system files have been corrupted somehow. I have not been able to command an fsck on the drive, because I don't have that on bootable CD and haven't been able to get far enough on the HD to do so. I tried using Acronis restore to copy the old version of the SYSTEM file, but this failed with some wierd messsage.
I can restore C: with an Acronis full backup from last month (made with the Acronis bootable CD), but is there a way to avoid rolling back that far? And I'm not positive even this will solve the problem.
Suggestions would be appreciated!
Solved!
Go to Solution.

Thank you very much, anarchy_1024, for your advice -- it was most helpful. Now for the rest of the story:
I attempted to restore the entire \WINDOWS\SYSTEM32\CONFIG folder from Acronis full backup, but it insisted (correctly) that the folder was corrupted. So I went looking for a chkdsk that I could run from CD, since I could not get XP up to command it from there.
I ended up downloading and building an Ultimate Boot CD for Windows (UBCD4WIN), and ISO Recorder to allow me to burn the resulting ISO file to CD. This took a while, but gave me an XP system on CD with lots of diagnostics, including chkdsk.
Using the A43 File Management Utility to view C:, a spot check revealed no problems *except* for the \WINDOWS\SYSTEM32\CONFIG folder, which couldn't be viewed because it was corrupted. I ran chkdsk and it found several index errors and recovered 22 "orphaned" files, which appear to be the contents of the corrupted directory. Finally, I ran MemTest86, which found no errors. After all of this, I rebooted to the hard drive and it came up fine! It has been an arduous odyssey, but the bottom line is that the system is recovered (crossing my fingers when I say that), and I did not have to fall back to a 3-week-old backup state. I still have no idea what caused the folder to be corrupted, but it probably should reinforce the notion that one should run chkdsk on the system disk periodically.
One anomaly is that the PXE-E61 error is still there, but then XP boots up fine. I expect this is because my boot device order includes some device, USB or CD, before the HD, which causes the error, but then the boot sequence finds the HD and all is well. I just never noticed this error message before, since it never caused a problem.
At this point, I would recommend anyone build and keep a UBCD4WIN CD around, just in case. I will mention 2 glitches in building it:
1. Like probably most consumers, my system didn't include a Windows Install CD. BUT all the install files are on the hard drive, in C:\I386 (this is an old Compaq system). All I had to do, in the UBCD4WIN build program, was to specify "C:\" as the Windows source directory, and all went well.
2. My first build of UBCD4WIN was too big for a CD. Since I didn't have a DVD burner handy, I did another build, disabling stuff I didn't plan on using (Firefox and Spyware software, mostly), bringing down the ISO size to under 600 MB, and that worked fine. It is very easy to do consecutive builds, customizing between builds, since the builder stays up until you close it.

Backend Error in PO - SRM 4.0

Hi,
For some PO's we have been getting errors which are as below--
This PO has backend errors
Sum of quantities >640< larger than total quantity
Sum of quantities >120< larger than total quantity
I have applied a lot of OSS notes suggested by SAP , and by experts on SDN. But none seems to work.
Has anyone found out a solution to this.
P.S. - We are using SRM 4.0.
Thx.

Hi Muthu,
Yes we were able to recreate this issue. This occurs when u change the account assignment for an existing PO , and then try to save it.
SAP gave us a code fix to implement in a BADI , and also suggested running a report to fix the account assignment index errors.
Apparently, this looks like a temporary fix, since we have noticed a few errors again even after putting the fix in place.
Let me know if you need more details on the code / report to run. Drop me a note on Personal information removed
P.S. --SDN does not allow posting email addresses ! : You knew the rule, but violated it anyway. Nice.
Edited by: Matt on Jun 8, 2011 11:28 AM

SRM - PO Value changed but not updated in in R/3 and SC

Hi Yann, Vadim, Christ,
I have a query that the PO after creation in the R/3 we then uplifted the PO value. The SC has been approved earlier. Now the PO value is not updated in the backend and the SC.
I have run the FM BBP_PD_PO_TRANSFER_EXEC, BBP_PD_SC_TRANSFER_INTERNAL but still does not update the value
BBP_PD Shows the follwing status.
MAIN status
0000000001 I1111 Item in Transfer Process X
0000000001 I1113 Follow-on Document Created
HEADER I1009 Held X
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1039 Incomplete X
HEADER I1080 In Transfer to Execution Syst.
HEADER I1106 Shopping cart ordered
HEADER I1129 Approved
HEADER STATUS
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1132 Transfer Failed (E.Sys.)
HEADER I1180 Document Completed
0000000001 I1021 Created
Please could anyone help.
Thanks in Advance.
Regards,
Uma.

Uma,
if the second status group is for the ECS PO, I can see
HEADER I1132 Transfer Failed (E.Sys.)
The transfer of updated SRM PO to R/3 was not succesfull.
Look at application monitors in SRM (PO --> Backend errors).
Look at ST22 in R/3.
Rgds
Christophe

SRM Local Contract Dumps when same material exists in multiple backend systems

Hi All,
We have a scenario of two backend systems connected to SRM system.
Materials are created with the same number in both the ECC systems and replicated to SRM system .
Materials are updated in COMM_PRODUCT in SRM with the respective logical system.
But when we creating a local contract by adding the same material system is throwing a dump .
system is not able to recognize the logical system for the material and material group linked.
Please let me us know if you have faced any such issue
Thanks
Rajesh

Hi Rahul Nazar,
RFC connections are working fine for both the logical systems.
Please find the dump details below :
Error application is coming up.
20140429
TP418
161636
r3cap
https://r3cap.XXXXXXXXXXXXX.net:8101/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
GETWA_NOT_ASSIGNED
Field symbol has not yet been assigned.
Function: CONVERSION_EXIT_PRID1_OUTPUT of program SAPLCOM_PR_CONVERSION
Method: ADD_FROM_BLANK_LINES of program /SAPSRM/CL_CH_WD_DOTM_CTR_ITEMCP
Method: PROCESS_BLANK_LINES of program /SAPSRM/CL_CH_WD_DO_MAPPER====CP
Method: PROCESS_BLANK_LINES of program /SAPSRM/CL_CH_WD_MAP_DO_TREE==CP
Method: /SAPSRM/IF_CLL_MAPPER~UPDATE of program /SAPSRM/CL_CH_WD_DOTM_CTR_ITEMCP
Method: FIRE_EVENT_UPDATE of program /SAPSRM/CL_CH_WD_XO_MAPPER====CP
Method: /SAPSRM/IF_CLL_XO_MAPPER~FIRE_EVENT_UPDATE of program /SAPSRM/CL_CH_WD_XO_MAPPER====CP
Method: /SAPSRM/IF_CLL_BO_MAPPER~FIRE_EVENT_REFRESH of program /SAPSRM/CL_CH_WD_BO_MAPPER====CP
Method: ONACTIONON_ENTER of program /1BCWDY/P8BFGBR5XZLSDCQM136Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/P8BFGBR5XZLSDCQM136Z==CP
Thanks
Rajesh Kalva

Error message severity not translated correct when locale is changed

We have a shell page displaying different task flows within a dynamic region. The shell page f:view tag has locale="#{LocaleManager.currentLocale}" to allow programmatic change of locale. Most of the flows uses the locale from the browser request (e.g. Danish) but some pages has fixed locale (en_US) and will always be rendered with this locale (don't ask me why. It's a requirement). For those fixed locale pages, the expression #{LocaleManager.currentLocale} always returns "en_US". It works nice, but we have a strange problem with the translation of error messages displayed by validators/converters. E.g. if a character is entered in a number field, the user will see the usual popup error message like "*Error:* The value is not a number". The message part of the error message is translated but the severity message prefix ("Error:" in the example), seems to be translated and cached once per session. If the error message popup has been displayed once in a different locale, then after change of locale, the severity message prefix continues to use the translation from the first display. The message part of the message is translated perfectly.
Let me give an example:
1) User enters da_DK page and enters a invalid number. Error message displayed: "*Fejl:* Værdien er ikke et tal"
2) User enters en_US page and enters a invalid number. Error message displayed: "*Fejl:* The value is not a number"
If the examples is reversed, then the error messages will be:
2) "*Error:* The value is not a number"
1) "*Error:* Værdien er ikke et tal"
Do anyone know how to clear this translated severity message prefix, when locale is changed? Or is there a better way to overcome this issue?
We're using JDeveloper and ADF 11.1.2.2 and are able to reproduce the issue on the embedded weblogic.

Hi again
ok I added another locale that ships with flash builder, and encoutered the same problem
whenever I change the locale, the error tooltips are gone
I was even able to fix both new locales by assigning the the validators custom error messages using resourceManager.getString() like i assign a value to all other UI strings in the application
the default locale which is specified in the project compiler's parameters is en_US
and my final question to you is:
is there a best practice regarding localizing & managing the error massages Flex SDK uses?
what is the internal path to the resource bundles that flex uses to display errors?
it seems like it makes more sense to copy and edit an existing list of errors, rather then blow up the application code...
can you please share your view on the matter
thank you for your help
Yariv

Backend error message when changing old PO's in upgraded system

Hi,
We upgraded our SRM system from 5 to 7.1
The issue we are facing is that fir all OLD PO's in the system,which were created before the upgrade,if we change the price or delete service lines in PO,then an error message is displayed "Backend error:Purcahse ordre still contains faulty items".
Has anybody come across this issue?
NOTE: This happens only for old PO's in the system.

Did you click on the error message to see the error details?
Thanks,
Prashanth

SRM local Purchase Order output error

Hi Folks,
Please can somebody suggest any hints for the following error. Our SRM local Purchase Orders that are either emailed, faxed or printed are suddenly showing the error message 'Incorrectly processed' on the output log. The same error is also shown in the systems log at tcode slg1:
"Error Error when sending to
Error Error in address output (name not filled).
Error Action could not be successfully executed "
Any help at this stage would be welcome!
Ciao.
Mikey.

Hi Mike,
There may be many reason for this error.Once output of PO fails,you get error of this form.
See if anyone has changed anything in smartform/PDF which you are trying to output as PO.This may happen because of that changes.
Check with basis if they have changed any setting SCOT transaction.
Check the vendor master which you are using is having commucation details like E-Mail or Fax or print option set against it.
Cheers,Nishant

Need backend error in SRM while entering Service item

hi SRM guru ,
I need backend error while entering Service item in SRM in PO .
I have scenario where in I need backend errors from ERP while making entry Service items .
I need some configuration or customization that will cause backend error againt Service items .
I have tried many thing like introducing such UOM , Tax code in SRM which is not supported by ERP .
I was expecting backend error for it but it does not happen like that .
I need find out some action that can cause Backend error for Sure while making entry of SRM Service item .
I kindly invite your ideas and inputs ...
In genral need something on PO UI that can cause backend error for Service item ...
i have this Scenario mainly in SRM 6.0 onwards systems...
Thanks in Advance .
Regards ,
Parag Bhise

Hi,
What specifically are you attempting to do?
Why any error when craeting service item.
You could code the DOC_CHECK_BADI to make an RFC call the the backend to do what ever check is necessary.
Regards,
Matthew

Snort 2.9.5 may generate an error if local rules are enabled

After installing SEU 913, which includes Snort 2.9.5, the following symptoms may appear in a Sourcefire deployment:
The sensor may go down
Unable to commit any changes to an IPS policy
Health Alerts state that the IPS/IDS DE exited unexpectedly

Solution
In order to resolve this issue install SEU 915 or higher.
Root Cause
An issue has been identified with custom rules or Emerging Threat rules that can violate the Snort rule syntax. These rules can cause the Detection Engine to repeatedly restart. Sourcefire provided rules do not contain these syntax errors and will not cause this problem.
Snort does rule validation upon start up. With Snort 2.9.4, when a rule is determined invalid, then a warning is written to syslog. However, Snort will continue to load omitting that rule. The Snort delivered in SEU 913 generates an error for invalid rules instead of a warning, which prevents Snort from loading. With the release of SEU 915, we simply made Snort 2.9.5 behave the same way Snort 2.9.4 does, which is to display a warning for invalid rules, but continue to load.
Invalid third party rule syntax is still an issue as SEU 915 will not correct them. To make sure rules are valid you can simply open an IPS policy in the editor and save it, or manually apply the policy. You will be notified if there are any invalid rules active in that policy.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!

If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene

SRM local PO CHANGE generates backend errors? But then dissappear?

Similar Messages

Maybe you are looking for