SRM mail attachment max size 20MB

Dear Sirs, our SRM system (6.0) allow to send invitation for vendors but limits the size of attachments to 20 MB
in mail messages (invitation to Rfx's)
If the attachment total size exceeds this value, the messages (mail) are not transmitted
Is it possible to configure (increase/decrease) this threshold from customizing ?
Besta Regards
Riccardo Galli - Hera Italy

Obsolete question

Similar Messages

RECEIVED attachment max size

What is the largest size a received attachment can be? Google searches show people answering from 5 MB to 20 MB. When I sent something that was about 18.7 MB (19,200,200) it bounced with the error message:
(reading confirmation): 552 5.3.4 a message size of 20483 kilobytes exceeds the size limit of 20480 kilobytes computed for this transaction

20 mb if you use an email program like windows mail, outlook our mac mail. 8 mb if you use the browser and webmail

HT201342 what is the max size of attachment that possible to send with icloud email?

what is the max size of attachment that possible to send with icloud email?

Welcome to the Apple Community.
There isn't an attachment size limit as such, the limit applies to the entire message including all attachments, which is 20 MB.
if you are using a mail application to send emails (ie not via a web browser) you may be subject to smaller limits imposed by your own ISP.

XLS as MAIL attachment....points Guranteed

I am sending one xls file as mail attachment.
The following code is sending the mail pefectly, but the attchment appears with a different icon, not as xls icon in the attchment, as it normaly does if we use so00 for sending a xls attchment thorugh mail.
If i download the xls attchment in local pc after opening the mail, it does open with Excel application, but if double click on it in the mail itself, its not opening in normal text format in sap text-editor in read only mode, not as xls file.I suspect something is wrong...here is the code..please let me know about your suggestion..
For Max, and those who answered my last question, i will reward point to deserving answer after this post.. i got disconnected while surfing...sory for the delay.
REPORT ZEMAIL_ATTACH                   .
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver
                                  DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
             con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY

Sorry for a mistake...this the code..i was talking about
REPORT ztest3.
E-mail an Abap report *
DATA : w_name TYPE sos04-l_adr_name.
SELECT-OPTIONS :
Recipient address
s_name FOR w_name DEFAULT sy-uname NO INTERVALS.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
START-OF-SELECTION.
E-mail Abap report
PERFORM CREATE_XLS_FILE_DATA.
PERFORM f_send_mail.
Form f_send_mail
FORM f_send_mail.
Data Declaration
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
NOTE: Creation of attachment is finished yet.
For your report, the attachment should be placed into table
objtxt for plain text or
objbin for binary content.
Now create the message and send the document.
Create Message Body
Title and Description
ls_docdata-obj_name = 'Sample Records From Ekpo in XLS Format'.
CONCATENATE 'Sample Records From Ekpo' 'In XLS FORMAT'
              into ls_docdata-obj_descr SEPARATED BY space.
Main Text
lt_objtxt = 'Sample Records From Ekpo in XLS Format'. "#EC *
APPEND lt_objtxt.
Write Packing List (Main)
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
Create Message Attachment
Write Packing List (Attachment)
LT_OBJHEAD = 'TEST.XLS'.
APPEND LT_OBJHEAD.
DESCRIBE TABLE it_attach LINES l_tab_lines.
READ TABLE it_attach INDEX l_tab_lines.
lt_objpack-doc_size = l_tab_lines * 255.
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 1.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'TEST.XLS'. "#EC *
APPEND lt_objpack.
Create receiver list
LOOP AT s_name.
lt_reclist-receiver = s_name-low.
lt_reclist-rec_type = 'B'.
APPEND lt_reclist.
ENDLOOP.
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = it_attach
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
ENDFORM. " F_SEND_MAIL
*&      Form CREATE_XLS_FILE_DATA
form CREATE_XLS_FILE_DATA .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
             con_tab TYPE x VALUE '09'.   "OK for non Unicode
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
                   " DATA_RETRIEVAL
     CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
                            " BUILD_XLS_DATA_TABLE
endform.                    " CREATE_XLS_FILE_DATA

Mail attachment saving problem

Hi,
When I tried to save a Mail attachment today I got the following warning:
Mail was unable to save the attachment “File.numbers” to disk. Please verify your downloads folder exists and is writable.
The warning must be wrong because other attachments, even of the same kind, can be saved without problems. I observed that only such files are effected which contain subdirectories like numbers, keynote, etc. and my suspicion is, that the saving problems may come from wrong file reading/writing rights within these subdirectories, that the sender of the Mail may have imposed to prevent unwanted changes to his/her file. May this be so? Otherwise, what else?
(MacOs X 10.5.6, Mail.app 3.5 and, in this particular case, Numbers08)
Thanks for for help in advace!
Joe.

Hi Kappy,
Nothing at all. No error message but no copying either, and no change in the curser appearance when dragging to the Desktop.
When I go to Mail --> Message --> Forward as Attachment, the attachment in the composer window can be saved like a normal file and has an appropriate size, eg. the desired original file seems to be contained in there. However, I have no Idea how to extract the original .numbers file from that.
Strange, isn't it?
Thanks,
Joe.

Excel mail attachment in background execution

I want to send excel as mail attachment with 53 columns when exceute in background. But i_attach has 255 characters so its truncating more than 255 characters in header and values of excel.
so pls tel how to send attachment with all internal table contents.
Adding Attachment
      CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
        EXPORTING
          I_ATTACHMENT_TYPE    = C_EXT
          I_ATTACHMENT_SIZE    = L_SIZE
          I_ATTACHMENT_SUBJECT = 'Valid Standard Cost Estimate'
          I_ATT_CONTENT_TEXT   = I_ATTACH[].

Hi,
What extension are you using? Try 'BIN' Extension and remove the size parameter.
Also add it to the HEX table, not the text one.
          CALL METHOD lv_document->add_attachment
            EXPORTING
              i_attachment_type    = 'BIN'
              i_attachment_subject = lv_string
              i_att_content_hex    = lt_attach[]
              i_attachment_header = lt_att_table[].
Thanks
Ernesto

Problem in Rolling to new a log file only when it exceeds max size (Log4net library)

Hello,
I am using log4net library to create log files.
My requirement is roll to a new log file with name appended with timestamp only when file size exceeds max size (file name ex: log_2014_12_11_12:34:45 etc).
My config is as follow
<appender name="LogFileAppender"
type="log4net.Appender.RollingFileAppender" >
<param name="File" value="logging\log.txt" />
<param name="AppendToFile" value="true" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="2" />
<maximumFileSize value="2MB" />
<staticLogFileName value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<param name="ConversionPattern"
value="%-5p%d{yyyy-MM-dd hh:mm:ss} – %m%n" />
<conversionPattern
value="%newline%newline%date %newline%logger
[%property{NDC}] %newline>> %message%newline" />
</layout>
</appender>
Issue is date time is not appending to file name.
But if i set "Rolling style" as "Date or composite", file name gets appended with timestamp, but new file gets created before reaching max file size.(Because file gets created whenever date time changes, which i dont want) .
Please help me in solving this issue?
Thanks

Hello,
I'd ask the logfornet people: http://logging.apache.org/log4net/
Or search on codeproject - there may be some tutorials that would help you.
http://www.codeproject.com/Articles/140911/log-net-Tutorial
http://www.codeproject.com/Articles/14819/How-to-use-log-net
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Maximum attachment file size for email account

hi what is the maximum file/s attachment size for email accounts .com and where do I find the means to adjust/ change the setting? thanks Brewsta

Our BigPond mail attachment limit is 10MB. This is the user guide for our BigPond email service:
https://my.bigpond.com/res/pdf/premiummail/installation_user_guide.pdf

Cannot send compressed PDF which is does NOT exceed MAX size?

I am trying to send some PDF's to be opened in IBook which works great, but I keep exceeding the max size which does not reflect the true size of the PDF I am trying to send.
When I try to send a PDF which is 22.1MD, I get a message from the Mail app that says in part:
"Your message has size 30.3MB, which exceeds 28.3MB, the maximum allowed by server:"
The unzipped PDF is 24.7 MB which could not be sent, so I zipped it (22.1 MB) and this will not go either. Perhaps the way to beat this is to break the PDF into two zipped segments but right-clicking on the file does not offer that option. The only choice I see is the 'Compres ...' option.
Any help will be appreciated.

Ok solved the issue. It was rights within the report.
It has been fixed now.
"You need to give the user and the report the schedule rights. One option would be to add another group and call it "Schedule for" then assign the scheduling rights to the group and add the needed users to the group.... Works like a charm."
[http://www.forumtopics.com/busobj/viewtopic.php?t=65458]
taken from the above link.

Not able to send yahoo emails through 'Mail' with attachments size 5 MB or more.

Hi all,
I am not able sent mails though 'MAIL' with attachment size more than 5Mb or more. I am using macbook pro and 10.8.3 OS X. Can anyone tell me how we can sent mails with resonable size? pls note that I want to send mails with actual size.
I am using yahoo for sending mails.
Regards,
Amit

All email service providers have a size limit on sending an email. See the following link for info on yahoo mail's file size restrictions, and ensure you are within this restriction.
- http://answers.yahoo.com/question/index?qid=20100326083940AAQgBa5.

What Verizon e mail attachment MB limit, ?

I tried to do a attachment of a web cam message of only 32 seconds long. and Verizon e mail would not send saying exceeded limit of MB for e mail attachment. I sent same web cam vid message on Aol.com and sent it know problem, on AOL I know can send up to 90 seconds video msg. And or 16 MB of photos attachments.
If any knows why Verizon e mail Max MB attachment let me know, strange that AOL. e mail video time 90 seconds , I cannot believe Verizon e mail could not even handle 32 second video message, Now I know why nobody wants to bother with Verizon home web page, e mail substandard to AOL, yahoo, Microsoft e mail .

Rocket11213 wrote:
I tried to do a attachment of a web cam message of only 32 seconds long. and Verizon e mail would not send saying exceeded limit of MB for e mail attachment. I sent same web cam vid message on Aol.com and sent it know problem, on AOL I know can send up to 90 seconds video msg. And or 16 MB of photos attachments.
If any knows why Verizon e mail Max MB attachment let me know, strange that AOL. e mail video time 90 seconds , I cannot believe Verizon e mail could not even handle 32 second video message, Now I know why nobody wants to bother with Verizon home web page, e mail substandard to AOL, yahoo, Microsoft e mail .
Should be 8 MB limit using the webpage email, and 20 MB using a third party email client like outlook or winmail.
Every email provider out there seems to have their advantages and disadvantages, here is a list of the top 18 free email services and what their plus and minus are.

6300 E-mail attachment

I cant send a picture using e-mail attachment with my phone?
Able to send and receive normal plain text,checked all the e-mail settings. File format, picture taken from the phone itself.
Firmware version 5.50, What seems to be the problem here?

Mr Badger,
Depending on the size of the attachment, it will either download small attachments, or present you with an option to download larger attachments when you want them.
Hope this helps,
Nathan C.

Incoming attached file size

Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
SunOS ultrasun1 5.10 Generic_125100-07 sun4u sparc SUNW,A70
Hi folks.
Does anybody known if there are a limit in the attached file size for the incoming (Internet/Intranet) mail.
Or exist any way to set this limits.
Thnx Ram

[email protected] wrote:
Does anybody known if there are a limit in the attached file size for the incoming (Internet/Intranet) mail.Messaging server doesn't care about the size of an individual attachment within an email but rather the overall size of the email (remember that base64 attachments can be ~30% larger then the original attachment size).
Or exist any way to set this limits.There are a large number of ways to set size limits on emails; on a per-domain, per-channel, per-user, MTA-wide etc. You will need to be more specific with the actual problem that you are hitting or limit you are trying to impose.
Regards,
Shane.

Actual Size (Full Quality) photos being e-mailed at reduced sizes! Why?

Yesterday I e-mailed six photos to a party in Nova Scotia. Because of the large file size of the photos--ranging from 6.7 MB to 9.2 MB--I opted to e-mail each photo individually. In iPhoto I chose the Actual Size (Full Quality) size setting for each photo.
Imagine my surprise when I discovered that every photo was e-mailed at a reduced size. For example, the indicated attachment size for the 6.7 MB photo was only 4.6 MB, and for the 9.2 MB photo only 6.1 MB. This is the first time I have noticed photos being e-mailed at reduced sizes even when the Actual Size (Full Quality) size setting has been chosen.
I would appreciate knowing what is going on here and what I need to do to remedy this situation.
Bob

Terence,
The problem remains unresolved. I followed your recommended procedure and got the same bizarre result!
I selected in iPhoto the same 9.2 MB photo I e-mailed to Nova Scotia yesterday, clicked on the Email icon, and selected Actual Size (Full Quality). The Mail 1 Photo window correctly showed the estimated size as 9.2 MB. I clicked on the Compose Message button which took me to the E-mail message window. I verified that the Image Size indicated at the lower right hand corner of the window was Actual Size. Interestingly enough, the Message Size indicated in the lower left hand corner of the window was 8.2 MB. Somehow my photo size was reduced 1 MB in the process of it being prepared for E-mail delivery! I then e-mailed the photo to myself. When I opened it up it showed 1 Attachment, 6.1 MB. This is the exact same result I got when I originally e-mailed this photo to Nova Scotia.
My primary concern here is that the quality of these photos is likely being compromised by this size reduction phenomenon which I have not previously noticed. I'm wondering whether this is a problem with iPhoto '09, Version 8.1 (415) to which I just recently upgraded from iPhoto '06. For your information I have also long employed iPhoto Library Manager (Currently version 3.5.5).
Perhaps you can try this same procedure and see if you get the same goofy result. I'll be eagerly awaiting your reply and advice on how to resolve this issue.
Bob

Xp_smtp_sendmail file size is larger than allowed max sizer of 65536 bytes

Hi,
We have a daily routine which generates a text file and runs xp_smtp_sendmail with the @messagefile argument to use the text file in the body of the email.
It has always worked fine but recently we have been receiving the following error when trying to run it:
Error: @messagefile "Drive\Filename.txt" file size is larger then allowed max size of 65536 byte
Funnily enough the file in question is 66,220 bytes so only just big enough to exceed this limit. The file in question is created from scratch on a daily basis so maybe this limit has always been in place
and we are now exceeding it. My question is can we increase this limit somewhere and if so where? The SQL Statement I'm running is:
EXEC master.dbo.xp_smtp_sendmail
@To = '[email protected]',
@From = '[email protected]',
@messagefile = 'Filepath\Filename.txt',
@subject='Test please ignore',
@server='smtp.servername.domain'
Thanks in advance for any suggestions anyone has!

what version of sql ser using?? it looks like you are using SQLMail. if you are sql 2005 and baove you can use database mail and use that to send mails
check for to set up database mail http://blog.sqlauthority.com/2008/08/23/sql-server-2008-configure-database-mail-send-email-from-sql-database/
change the max file size configuration for database mail https://msdn.microsoft.com/en-us/library/ms186321.asp
Hope it Helps!!

SRM mail attachment max size 20MB

Similar Messages

Maybe you are looking for