SRM  with HR integration

Hi Experts,
We are currently Using  the SRM 4.0 with support pack 9 currently.  Till I recieved the requests from business for creation of SRM user access, so I am creating the SU01 data and intergrating to the Organization structure using Users_Gen.
As we do not have the Security and Admin part currently for creation of SU01 data, we SRM team only maintains directly in the system.
Now my querry is like  we have HR module implemented in the Project, so can we setup HR module integration with SRM whenever a user is created in the HR org structure  he will then also to be also created in SRM? Is that Possible. if so Central User Admin should be in place? or what does this CUA means.
is this Viable solution now and how complex it is now?
For all these setups what are the prerequisties and how to setup this HR integration with SRM? can any one suggest me.
Regards
Srujan K

Hi,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP documentation of EBP transports which explains in detail the replication.
https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf
Thanks
prasad s

Similar Messages

  • How to Integrate SRM with MDM

    Hi
    Could you please give documents that clearly (step by step) tells about Integrating SRM with MDM
    Integrating MDM with SRM and R/3
    BR,
    Vijay Mittal

    Hi Vijay,
    Pls have a look on these links..
    https://websmp103.sap-ag.de/~sapdownload/011000358700006199102006E/SRMMDM_CG_10-24-06.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
    help.sap.com/saphelp_srmmdm10/helpdata/en/index.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6075d293-291b-2a10-7fbb-b827b28fd9b0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0102a91-bae4-2910-f298-acbae13e80d4
    SRM MDM Catalogue
    Hope they will help,
    + An

  • Stack  overflow error when connecting to SRM with integrated ITS

    When I try to connect to SRM Server through Integrated ITS, it is giving me the error "Stack overview, giSAPWP  is null or not an object. Kindly let me know how to resolve the error.

    Hi Arun,
    Are you running with Portal ?
    If yes, could you confirm the following point :
    - portal and ITS of the SRM system run under the same protocol (both under http or https, ELSE it is not possible),
    - portal and ITS of the SRM system are in the same domain
    Kind regards,
    Yann

  • SRM  and XI Integration

    hi,
    can anyone provide me some good links,docs and blogs about SRM XI integration please.
    and what would be the scenarios with SRM integrations?I mean are they like
    SAP SRM -XI-R/3(or ECC)
    SAP SRM -
    XI----non SAP systems(i have read onb sdn SUS,EBS systems)
    non SAP---XI---SAP SRM
    SAP r/3(or)ECC--XI--SAP SRM?
    what we need to use on SRM side (sender/Receiver)are they Idocs/RFC/proxies?and what we need to use on SAP R/3 side and thirdparty systems?
    please clear me?
    thank you,
    babu

    Hi Babu
    SAP deliver a lot of XI contents for SRM.
    For this have a look at service.sap.com/xi --> Business content --> SAP XI Content --> XI content delivered by SAP --> mySAP SRM
    Also refer this realtive thread from jin shin
    Re: Http server code 401 reason Unauthorized explanation Unauthorized
    There are business package available for the standard SRM and XI integration. For this you can download from the service market place and you can make use of the standard SAP delivered objects.
    Most of the time senario involves Idoc/RFC and Proxy here
    Some of the docs from SAP service market place are-
    go to https://websmp101.sap-ag.de/ibc -
    >mySAP SRM-->and search
    http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
    http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
    http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
    http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
    Cheers..
    Vasu
    Reward Points if found useful **

  • SRM and ECC integration

    Hi Gurus,
    We are in a phase of integrating SRM with ECC, so that any master data created in ECC should be replicated in SRM etc...
    Can any one provide me detail step by step configuration required to integrate SRM with ECC?
    Any material witll be helpful.

    Hi sanju,
    see these links
    https://www.sdn.sap.com/irj/sdn/articles-community?prtmode=print&startindex=261 - 38k
    https://www.sdn.sap.com/irj/sdn/articles?startindex=21 - 46k
    www.sap-press.com/product.cfm?account=&product=H2900 - 34k
    thanks
    karthik
    reward me idf usefull

  • MBAM 2.5 with SCCM Integration

    Hi
    I've installed MBAM 2.5 and now need to roll back the changes as I didn't specify the -SsrsServer value and this is hosted on a different server. When I try to run Disable-MbamCMIntegration I'm getting the following error
    Disable-MbamCMIntegration : Could not find System Center role settings for 'Reporting Services Point' role at site
    'xxx' on server 'Value removed'
    At line:1 char:1
    + Disable-MbamCMIntegration
    + ~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Disable-MbamCMIntegration], ReportingServicesNotConfiguredException
        + FullyQualifiedErrorId : Microsoft.Mbam.Setup.Common.CmIntegration.ReportingServicesNotConfiguredException,Micros
       oft.Mbam.Server.Commands.DisableMbamCMIntegrationCommand
    If I try to install the Web Applications on my MBAM server with SCCM integration it fails with the following
    The web application prerequisite check found missing prerequisites
    The specified Configuration Manager integration mode does not match the Configuration Manager integration mode currently in use

    Sure
    If you edit the following key in the registry on your SCCM server
    HKLM\SOFTWARE\Microsoft\MBAM Server\Enabled\CMIntegration to 0 and then restart the server it will allow you to re-add the feature with a different config.

  • Unable to install MBAM 2.5 with SCCM integration on named SQL instance

    Hi,
    in production i am installing MBAM 2.5 with SCCM integration but during the installation it asks for the SCCM reporting services point and which it is unable to recognize.
    whereas in my lab environment i have default SQL instance which has reporting installed, in that case it works fine.
    can someone let me know why the issue is coming?
    in the event log the issue is :  Description = "user domain\username is not able to get the lock at this time.Error:0x40480732"

    For the integration part, You need to install the MBAM SCCM Integration feature on SCCM server. For compliance reporting in integration, MBAM uses the Reporting service point for SCCM.
    When installing the SCCM integration feature, you need to provide the name of the reporting Server where Reporting Service point role is installed for SCCM. But it does not provides any option for the instance but for the Server only. We have two instances
    for SQL. One for CAS and other for Primary site. We need to run the installer on CAS and hence need to connect to the SQL instance for CAS.
    We have also tried with the powershell commands but it is not working either.
    Is there any way to install MBAM integration feature on a SQL instance. As far as I know, it automatically picks the instance but not happening for me.
    Gaurav Ranjan

  • Getting started with EP integration

    Hi,
    A company I work for has a .NET web application that they would like to integrate into the SAP Enterprise Portal. There are a few .aspx pages that should be accessed from the portal.  So, we would like to create a tab for our application and have a few links that open the .aspx pages.  Eventually, we would like to get the integration certified.
    This is the first time I've worked with SAP.  From what I've read, doing this type of integration should be fairly easy, but I am not sure how to start.  I'm hoping someone will be kind enough to give me some tips or point me to some good source of information.
    I've installed the NW04SneakPrevJavaSP11, which I believe contains everything I need for SAP including the NetWeaver Developer Studio.  I also installed PDK for .NET and it looks like it has integrated properly with Visual Studio. 
    When I extracted the content of the PDK for .NET, it contained two files, com.sap.portal.dotnet.framework.sda and com.sap.portal.dotnet.services.systems.sda.  I do not see these services in my Control Panel Services.  I've read that I must deploy these through the SDM, but I did not figure out how to do that.
    Can someone please provide some instructions to get me started with this integration?  Do you have a simple example that adds a tab for an application in the portal and contains a link to open a URI?  What should I look for to verify that I have everything installed and working correctly to begin the integration?
    Thank you very much!

    Hi Kenneth,
    If you are looking at integrating .Net web application with SAP EP there are two ways of doing it -
    1. Uset the PDK for .Net and then develop the .Net applications using the Newweaver controls, finally deploy this .Net application on the Portal itself.
    2. If this .Net application is already built and running on a different server other that EP, u can intergate this using a URL reference ans enable SSO form EP to this .Net application. The effort in this case will be very less.
    If you choose the 1st approach , then you have to configure SAP EP to deploy .Net applications -
    1. Configure the .Net runtime in EP
    2. Install the PSK plugin in Visual Studio.
    The two SDA files have to be imported in your Portal using the Software deployment manager, the person who has installed EP will be aware of this.
    There is also a pdf document on SDN which explains everything in detail about the configurations required for PDK for .Net.
    Regards,
    Vivek
    Please reward points if helpfull.

  • Not able to deploy VIO 1.0.1 with NSX integration

    Hello,
    Whenever I try to deploy VIO with NSX integration I stuck on "Configure Neutron networking" step.
    Edge Cluster drop-down menu does not contain any options and so I cannot proceed with the deployment. (DVS works fine)
    As this a POC deployment, I use the same cluster for Management nodes, NSX Edge nodes and users VMs.
    According to the documentation that configuration is supported, even it is not recommended.
    Thanks,
    Max

    Please check if you have the prerequisites met for NSX integration for VIO.
    Create a Virtual Distributed Switch(s) and add all hosts from both the management and compute clusters.
    On separate VLANs, create three port groups: Management, External, and Public API Network. The fourth port group, VXLAN Transport, is created inline with the NSX installation:
    The Management network carries traffic among the management components.  This network requires 13 or more static IP addresses.
    The Public API network exposes the OpenStack dashboard and provides access for tenants to the OpenStack APIs and services.  This network requires 3 or more static IP addresses.
    The External network provides external access for the instances. This network requires 8 or more static IP addresses.
    The Transport network is used to carry traffic among the instances.  This network requires 1 address for each host in the Edge and Compute clusters
    Note: Some designs you may collapse both the Public API Network and External network into a single network segment.
    -nathan

  • MBAM 2.0 with SCCM Integration: Recovery Audit Reports errors.

    I have installed MBAM 2.0 with SCCM integration according to the following website:
    http://myitforum.com/myitforumwp/2013/06/10/how-to-install-mbam-2-0-with-configmgr-integration/
    Topology:
    SCCM 2012
    SCCM SQL Server
    MBAM Server
    MBAM SQL Server
    Components installed:
    Integration components on SCCM 2012 server
    Compliance and Audit Reports on SCCM SQL Server
    Recovery and Audit Databases on MBAM SQL Server
    Self-Service and Administration Monitoring on MBAM Server
    Everything is running correctly: SCCM sees compliance reports, keys are populating into the Recovery database. Self-service works correctly as tested.
    However, the Recovery Audit Report in the /Helpdesk webpage reports an error:
    "Cannot create a connection to data source 'DataSource1'. (rsErrorOpeningConnection)
    Browsing to the /Reports page on the MBAM SQL server (with reporting) yields an empty page.
    If I install the Audit and Compliance reports onto the MBAM SQL server, those populate (but are empty, as SCCM is handling that component), however, the Recovery Audit Report still yields the same error.
    Ideas?
    Thanks,
    -Patrick

    You can put the Audit Reports on the SSRS instance on SCCM Server. But it has its own limitations. What if you want to configure the encrypted configuration within the MBAM environment using SSL certificate. In that case you have to take special
    care while using the SSL certificate for configuring the reporting Point as it has been also used by the SCCM.
    Gaurav Ranjan
    So, let me get this clear, I can install the Audit Reports onto the SRSS I am using for SCCM and not have to deploy an SRSS instance elsewhere?  The SSL certificate detail is not an issue.  I am desperately trying to avoid yet another instance of
    SRSS.
    Thanks

  • ANN: Spring 1.2 with TopLink Integration Released

    Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
    To get started, try out the Pet Clinic sample app configured to use TopLink.
    NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
    - Shaun
    Spring Home page: http://www.springframework.org
    Spring 1.2 Announcement: http://www.springframework.org/node/86

    Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
    To get started, try out the Pet Clinic sample app configured to use TopLink.
    NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
    - Shaun
    Spring Home page: http://www.springframework.org
    Spring 1.2 Announcement: http://www.springframework.org/node/86

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • Records management and Document builder in SRM with PS

    Hi,
    We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS.
    Thank you
    Sreedhar Vetcha

    Hi Chris,
    I am having the same issue as Patrizia while using BSP, SRM_DEMO_RECORD & SRM_DEMO_BSPEXT, to search/display, maybe update later the records,documents,and notes that are stored in RM. I have read all the documentation  described in your messages as to how to customize web display BSP application using these 2 BSPs, srm_demo_record & srm_demo_bspext. 
    I tested SRM_DEMO_RECORD with <srm:element> tag embbeded in the layout page, but it lists only the records that associated to a given RMS_ID and SPS_ID, and I wasn't able to get it to display the associated document and notes for a selected RM record. The comments on the iview page in BSP suggest the custom code is needed for initial request from browser and callback event to return the notification for the activities occurred in RM. As you suggested to Patrizia, I wonder if you've some sample code that i could use to make these BSPs work before additional enhancements is needed later.  As far as other prerequisit settings of http access and assigning search interface class to the correct service provider element type using GENSP_QUERY_EXT connection parameter are all properly set with my customer. So i'd feel really grateful if you could forward me the example codes for these BSPS.
    Regards,
    Amy Lee
    SAP NetWeaver Consultant

  • Problems with accounting integration cProjects

    Dear Sirs,
    I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
    The project is unknown in Accounting
    Message no.
    DPR_FIN_GECCO006
    Diagnosis
    Etc..
    In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released – replicated.
    No company code could be determined. Message No IAOM_CPROJECTS001. 
    In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
    I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
    Best regards,
    Jørgen Ruud

    Hello Jørgen,
    It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
    logic: CPR1 -> model order -> company code
    Would you please try the note 875275, if it can help.
    In case that it does not help, you can eithter use the Badi method  to set it hardly, or create a customer message to let SAP check it.
    name of Badi DPR_FIN_GECCO_ATTR
    code like following:
          ls_attribute-data_element     = space.
          ls_attribute-value            = '1000'. 
          ls_attribute-field_name_orext = 'BUKRS'.
          ls_attribute-fldname_receiver = space.
          ls_attribute-struc_name_copa  = space.
          ls_attribute-field_name_copa  = space.
          ls_attribute-ext_attr_name    = space.
          ls_attribute-ext_attr_value   = space.
          INSERT ls_attribute INTO TABLE ct_attributes.
    regards!
    Zhenbo

  • Drilldown report with Office Integration

    Hi everyone,
    can anyone help me to understand how to display a report with Office Integration (on monitor) so that you can see the header?
    Thanks,
    Jess.

    Office Integration is available with Report Painter reports.  The first thing that you need to do is make sure the "Expert Mode" is selected.  Once the report is executed select Settings > Options.  In this pop up box you will see the List Output section and the Office Integration section.  We have all the boxes in the List Output section checked. 
    You may also want to check your Text for Export.  When you're in transaction GRR2 (Change mode of the Report Painter report), follow this menu path:  Extras > Report Text > Text for Export.  If you don't have anything here that is why your not getting any header information when you use Office Integration.  You can select Text > Copy from and copy the actual header information into the text for export.
    I hope this helps!

Maybe you are looking for