SSC v's MIC

Hi folks,
I have recently added some new APs to our existing network. I went through the process of updating them from autonomous to lightweight so as to manage them from a central controller (4400 Series Wireless LAN Controller).
However, the controller sees the certificate type on the new APs as MIC and the existing APs have SSC certificates. Is there any cause for concern here, if so, what would it be and how would I go about addressing this?
Many thanks for your assistance.
JP

No concern.
After a certain date (2006 or sth ?), all aps cames with a manufactured installed certificate (MIC). Those APs can be converted from IOS to lwapp/capwap by a simple IOS swap.
Only older APs, not having a certificate require the lwapp upgrade tool to install a Self-signed (SSC) certificate on them.
No concern at all, see ? :-)

Similar Messages

OEAP 600 and AP policies

I have two 5508 and a few hundred 1142 in our internal net. Now I bought some OEAP 600 to do tests in some small branch offices, but I would like to enable AP policies with MAC filtering to block that anyone else can connect an OEAP through our firewall. If I enable 'Accept Self Signed Certificates (SSC)' and 'Authorize MIC APs against auth-list or AAA' as suggested in Cisco document 'Aironet 600 Series OfficeExtend Access Point Configuration Guide', will that effect only my OEAP 600 or will I have to also include the MAc addresses of my internal 1142?

Hello,
For More information on OEAP-600, please watch the "Community Tech-Talk Series" Cisco Office Extend Access Point OEAP-600
https://supportforums.cisco.com/community/netpro/wireless-mobility/begin-wireless/blog/2012/02/24/cisco-office-extend-access-point-oeap-600
Thanks,
Vinay Sharma
Community Manager - Wireless

Is it possible to use the upgrade tool to generate SSC's anymore?

I have a hand few of really old 1130's, manufactured prior to when MICs were installed. In anycase I wanted to convert a few of them to lightweight for use in a remote location with a 4400 we have laying around. Long story short, during the upgrade process I see an error on access point. I looks like one of the airespace certs that is copied over has expired back in April of this year. After the upgrade the access point fail to join the controller. I see an error on the access point and it seems there is a problem with it accepting the certificate on the controller. I see several posts were it seems that some people are having the same problem, I have not seen a solution.
I think that if I got it to connect the first time it wold be good to go. I'm wondering if configuring the conversion tool with a date prior to expiration would get the certificate on the access point and maybe at that point it would work.

Sounds like 2 issues. First need to make sure you have ssc check boxed under allowed. Then when the ap tries to join do the following debug to get the hash for the ap cert ..
(Cisco Controller) > debug pm pki enable
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles: getting (old) aes ID cert handle...
Mon May 22 06:34:10 2006: sshpmGetCID: called to evaluate
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 0,
CA cert >bsnOldDefaultCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 1,
CA cert bsnDefaultRootCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 2,
CA cert >bsnDefaultCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 3,
CA cert >bsnDefaultBuildCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 4,
CA cert >cscoDefaultNewRootCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 5,
CA cert cscoDefaultMfgCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 0,
ID cert >bsnOldDefaultIdCert<
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles: Calculate SHA1 hash on
Public Key Data
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 30820122 300d06092a864886 f70d0101
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 01050003 82010f003082010a 02820101
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 00c805cd 7d406ea0cad8df69 b366fd4c
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 82fc0df0 39f2bff7ad425fa7 face8f15
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data f356a6b3 9b87625143b95a34 49292e11
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 038181eb 058c782e56f0ad91 2d61a389
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data f81fa6ce cd1f400bb5cf7cef 06ba4375
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data dde0648e c4d63259774ce74e 9e2fde19
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 0f463f9e c77b79ea65d8639b d63aa0e3
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 7dd485db 251e2e079cd31041 b0734a55
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 463fbacc 1a61502dc54e75f2 6d28fc6b
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 82315490 881e3e3102d37140 7c9c865a
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 9ef3311b d514795f7a9bac00 d13ff85f
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 97e1a693 f9f6c5cb88053e8b 7fae6d67
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data ca364f6f 76cf78bcbc1acc13 0d334aa6
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 031fb2a3 b5e572df2c831e7e f765b7e5
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data fe64641f de2a6fe323311756 8302b8b8
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 1bfae1a8 eb076940280cbed1 49b2d50f
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles: Key Data f7020301 0001
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
SSC Key Hash is 9e4ddd8dfcdd8458ba7b273fc37284b31a384eb9
!--- This is the actual SSC key-hash value.
Mon May 22 06:34:14 2006: LWAPP Join-Request MTU path from
AP 00:0e:84:32:04:f0 is 1500, remote debug mode is 0
Mon May 22 06:34:14 2006: spamRadiusProcessResponse:
AP Authorization failure for 00:0e:84:32:04:f0
Then add the ap to the Mac filter ..
Sent from Cisco Technical Support iPad App

How do I use an external mic with the iPad4?

How do I connect an external mic to the new iPad4? Older models seem to have worked, but the lightning connector causes a lot of problems. I would like to use my Zoom H1 with my iPad4 and GarageBand. Any ideas? Thanks so much!

Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Mic problem in window 8.1 Pro ???

My Mic is not working in skype what i do ??? Mic is working well in sound recorder but not working in skype plz guide me . i am using external microphone .

To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

AS2 Receiver Error: MIC not verified # unexpected-processing-error

When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?

Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen

Live! Cam Voice (mic not working)

Just bought Live! Cam Voice yesterday. Mic still not working properly even after verifying the installation. Please advise how to rectify.
Thanks,

Hi,
Is there any chance you could upload the drivers from the cd for me please because creative dont currently support the camera.
I can give it a trial run on my windows xp and give you some feed back after.
Thanks,
Rav

The difference between iPhone and iPod earphones with mic ?

What is the difference between the Apple iPhone Headset with Microphone and the Apple Earphones with Remote and Mic ?

mamarro wrote:
The iOS just WORKS as it should and is not glitchy at all like my experience has been with Android.
I had 6 Droid X's since laundh day on July 15th, and my wife has had 4 Droid Increidble's since she got her phone around that same time - and that one had been out for a few months before she got it even, so the "initial bugs" should have been worked out by then as there were a couple software updates to the phone (not even the 2.2 update I am talking about - just 2.1 updates to fix bugs) before she even got it.
And, that's another difference.....whenever there is a software update for the iPhone you get it IMMEDIATELY as there is no "hold" by carriers to tailor it to their own needs, etc., like there is with Android.
Good point about the updates, I believe the Fascinate just got the update that's been out for months already.

Linking MIC & Batch characteristic

Hey All
My understanding is that to move values from batch characteristic to MIC we need to maintain the link in MIC and this relationship is one to one relationship.
We have a business requirement as below. I do 2 types of testing i.e. official & vendor. First i do vendor testing and this will be reflected in the batch. After this i do official testing and this needs to overwrite the vendor results and update the batch automatically.
If i have to use the batch characteristic + MIC link, then i need to create 2 batch characteristics & 2 MIC's / test i perform on the material.
Is there a way by which i can have multiple link between batch characteristic & MIC and manage this link via some user exit or
do you have some suggestions on how to handle this business requirement?
Regards
TOM

You only need one inspection characteristic.
You don't indicate in your process how or when these two types of inspection happen.
You can create a source inspection lot with the tests the you use to record the vendor results on.
Then when you receive the material, you have an 01 inspection lot created for recording your actual results.
The second set UD on the 01 lot will over write the batch record results from the first source inspection.
If you have one inspection lot that is created at goods receipt, use two operations. Operation 10 has the vendor tests. Operation 20 has the in-house testing. When the UD is made the test results from the last operation will be written to the batch record.
Craig

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Why is the mic not working working on speaker mode, even though siri and voice memos are working?

I bought my iphone 4s from canada about less than a month ago. It worked perfectly fine, until i recently discovered that the mic on speaker mode stopped working. That means, when i speak to someone on speaker during a call, they are unable to hear me.However Siri and voice memos are working fine. I could initially face-time but now i cant. I have also tried restoring my iphone a few times.
As i am based out of india, I contacted apple in India, they refused to touch the phone as it was purchased in Canada and the warranty is apparently applicable only in the country of purchase. I can in no way go back to canada to get the phone replaced. Does anyone have any ideas as to how I can resolve this? Shouldnt apple be able to get this sorted since its a brand new phone under warranty?

Hello jaymc04_463,
The following article details a number of troubleshootings steps that may help restore normal audio to your iPhone.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Allen

IPhone 5S phone calls - no sound, mic works in every other scenario

During phone conversations the person I am connented with cannot hear me! All other aspects of the phone work, I can hear them, go on speaker, etc
Tested the mic, works for Siri, Voice Memos etc.
This happened all of a sudden.
The phone is not in headset mode, there is nothing lodged in the jack. I am not on mute, the volume is turned up, etc
I have restarted several times and nothing. Otherwise the device is functioning as normal.
Any tips? I am at a loss.

Hello Faragher,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
Make sure that the latest version of iOS is installed.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
Best of luck,
Mario

My iphone 5s mic works perfect on voice memo and viber calls but it dosent work well in regular calls

I have problem with my iPhone 5s mic,iOS 8.1.3
the front mic works perfect in viber calls or voice memo in every position I put the phone on my ear, but in regural calls my voice is to low and muffled. my friend on the other side always tell me to speak louder. When i put the phone in front of me it works fine but when i put it on my ear the mic is faulty And i have to speak loud.It dosent have to be anything with the hardware, what should i do?? I tried to disable the noise cancelation but it dosent changed any thing,plz help me, i cant afford returning the phone, what is wrong with my over priced phone, i had iphone 5 and it was perfect, but this one has a big issue,i tried restarting the phone, is reseting to factory setting may helps. Please help me with this.
any suggestion will be helpfull
IPhone 5s iOS 8.1.3

I'm Updating too 8.2. hope it fixes the issue.
if i know how can i fix this problem...

SSC v's MIC

Similar Messages

Maybe you are looking for