Running HP Deskjet F380 on a laptop running Windows 7

My old computer died. It was a 9 year old Dell running Windows XP. I cannot load the software for my HP Deskjet F380 on the laptop I bought at a pawnshop. I get the message that the HP software is not compatible with my version of Windows: "Current OS: Windows XP 64 bit; Supported: Windows 2000, Windows XP" -- this is wrong. I'm running Windows 7.
Is there a work around for this. I love this model. Please advise.

Hi,
Where do you get the driver ? From the old CD ? If yes, the CD knows nothing about Windows 7. Please download Full Feature Software and Drivers from the following link and install it on your Windows 7 machine.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=1128...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

I am running FireFox on a new HP laptop with Windows 8.1. My email program ATT yahoo.mail is constantly showing error message "Mozilla Firefox is not responding

Only happens with the email program

Hello,
Sometimes antivirus extensions cause browsing issues in Firefox. Try disabling McAfee while on your email program to see if it still crashes.
If after disabling McAfee the site still crashes, enable that plugin again if you wish. Please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

What Firefox version choices do I have for using Firefox on new laptop running Win 7 64-bit, and how do I move bookmarks from current laptop running Firefox 3.5.13 to new laptop?

Currently running Firefox 3.5.13 on laptop using Windows XP pro sp3 and will want to move my bookmarks to a new laptop. New laptop uses Win 7 pro 64-bit OS. I have read too many conflicting reports about Firefox and Win 7 and understand that Firefox is working on a true 64-bit version. What are my choices for a stable web browser for new laptop and which particular version of Firefox is recommended and the pros and cons of that suggestion? (I believe one can run Firefox 32 bit version in the 64 bit environment, but is that the best choice?) I have not installed Firefox on new laptop yet and am eager to dump IE. This is being posted from my old laptop. Thanks ...

http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Mozilla%20Firefox&v=Mozilla&uid=3&l=en&pf=0&pi=0&c=Communication%20%26%20Internet&sc=Web%20Browsers%20%26%20Plug-Ins&os=64-bit
If you go to this link you will be assured by Microsoft and Win7 "new" app checking and making sure that all drivers and software you have is compatible with Win7 64 bit. And in this article it states that Firefox version 3 IS compatible and designed for 64 bit OS, hm mm well as you know that is incorrect!! As of today Mozilla Firefox is not designed for a 64 bit computer. Thank you for your honesty and it saved me a big headache By being upnt and honest. my books!! Great job!!

How to install HP Deskjet 990cxi on my new laptop running Windows 7 Home Premium on an AMD 64

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP do anything about this?
Terence Keeler B.Sc (Hons) LLM
Freshwater, Isle of Wight, UK

JJMack <[email protected]> wrote:
=============
JJMack created the discussion
"when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

Share Deskjet 3650 on XP with Laptop running Windows 7

Hi
Simple question - maybe not so simple an answer. I have an XP PC with a USB connected Deskjet 3650. I want to share this device with a Laptop running Windows 7 64 bit. My attempts so far have failed - although I can see the printer when I search to add it but Windows 7 says there is no driver available to install. I did install the printer on Windows 7 with USB connection hoping it would use that driver - but no liuck. What am I doing wrong and is there a fix? Thanks

Hello Bigbadger,
I saw your post about trying to install the Deskjet 3650 Color Inkjet Printer on your Windows 7 system. I have researched this for you and unfortunately, there are no drivers available for this printer and Windows 7.
Here are the drivers available for the Deskjet 3650:
HP Deskjet 3650 Color Inkjet Printer Drivers
I hope this helps answer your question.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I had a lenovo laptop running windows 8. my hp deskjet 3745 wont print . but no error found.

i had a lenovo laptop running windows 8. my hp deskjet 3745 wont print . but no error found. the lights are not blinking. the cartrige and the door doesnt have any issue, but still it wont print my documents.. hoping to fix this issue as soon as possible.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

OfficeJet Pro 8600 N911g cannot complete s/w installation on laptop running XP

Initially, successfully installed the 8600 s/w on a Dell D810 laptop running XP which is linked both via Ethernet and wirelessly to the same LAN as the printer. The printer is wirelessly linked to a port on a WAP device connected to the LAN/router. After setting up the router with DNS 8.8.8.8 and 8.8.4.4 addresses, successfully set-up e-Print function thru Verizon high speed internet connection. This confirms that the my LAN and Internet can see the printer connection through the WAP. Guess I should have left well enough alone, but I decided to also install the printer on my desktop, a Dell XPS desktop (also running on XP) that is linked thru a wired Ethernet connection to the same LAN.
The XPS s/w install was flawless and I can print from the desktop and HP e-print functions continue to work on the 8600, but I can no longer print from the laptop. As I mentioned, the s/w did load successfully on the laptop when I initially installed the printer. Following a suggestion on HP's website, I uninstalled the HP 3800 s/w in an attempt to reinstall the printer on the laptop. However, I have not been able to successfully reload the s/w on the laptop, despite numerous attempts.. The program can find the printer on the LAN, it always comes up with the same result: "The printer was unable to be installed over the network". I confirmed that there is no firewall or security setting blocking the s/w load.
As part of my problem resolution, I've also followed the procedures contained in HP Troubleshooting Your Wireless Connection but still cannot complete the installation process on the laptop. In my latest attempt to resolve the problem, I marked the 8600 as shared on the XPS desktop system, as suggested in another post, but suspect that would only affect USB-connected printers, not those that are wirelessly connected.
When I downloaded the HP Hardware Diagnostic Utility (HPHDU), it also was able to find the printer on the LAN but displayed a message: "We're sorry but the OfficeJet Pro 8600 N911g in not supported by this utility".
Can anyone offer a suggestion as to why the 8600 install worked successfully when initially loaded on my laptop but I cannot reload it? That could provide a clue as to what is blocking the reinstallation on the laptop. As I said, the desktop s/w loaded successfully and I can access the 8600's functions from there. Each of the HP utilities I downloaded from HP and have run on the laptop can find the 8600, but none can complete the s/w load so that I can use the printer from the laptop.
The LAN also has an Ethernet link to a HP OfficeJet 7310 that can be accessed from any PC on my network, so I reluctant to entirely remove all HP software so I can at least have one printer operational. I feel like I am on the bleeding edge of technology so any help is appreciated!
Thanks.

Hi,
Thank you for posting,
I see that you have issues with reinstalling the Officejet pro 8600 drivers on your DELL Laptop.
In order to resolve the issue, please follow the steps given below:
1. Please uninstall the printer drivers by going to Add or Remove programs in control panel. Then click on start and click on Run. In the run window, please type Taskmgr.exe and click on OK. In the task manager window, please click on the Process tab and check if there are any HP Processes running. If there are any HP Processes running, please select the process and click on end process.
2. Then click on Star and click on printers and faxes. Then the printers and faxes window, please click on File in the menu bar and then click on Server Properties. In the server properties window, please click on the Drivers tab and check if the HP Deskjet drivers are included. If you find any, please select the drivers and click on remove and then click on apply and click on OK.
3. Then go to C:\ProgramFiles\HP and delete the folder with the name of the name of the printer.
4. Then go to C:\Program Data\ and delete the folder with the name of the name of the printer.
5. Then go to C:\Windows\System32
And delete the HP DLL files related to the printer.
6. Then go to C:\Windows
And rename the twain_32 folder to twain_32_old.
7. Then click on start and click on Run. In the run window type %temp% and press enter. In the Temp folder delete all the files.
8. Delete HP Printer Software entries in the registry.
a. Click on Start and click on run. In the RUN window, plase type Regedit and click on OK.
b. In the Registry Editor window go to
HKEY_CLASSES_ROOT\Installer\Products and then click on each folder and check if that entry belongs to HP. If you find any entry related to HP, please delete it.
9. Then go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\
and then click on each folder and check if that entry belongs to HP Printer. If you find any entry related to HP printer, please delete it.
10. Then go to C:\Documents and Settings\All Users\Hewlett Packard or HP Folder
And delete the folder with the name of the printer.
11. Then go to C:\Documents and Settings\User name of the computer\AppData\ Hewlett Packard or HP Folder
And delete the folder with the name of the printer.
12. Assigning the permissions in the registry.
a. Click on Start and click on run. In the RUN window, plase type Regedit and click on OK.
b. In the registry editor window, please right click on HKEY_CLASSES_ROOT and click on permissions.
c. In the Permissions window, please select each user and assign full permissions.
d. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
e. Then right click on HKEY_CURRENT_USER and click on permissions.
f. In the Permissions window, please select each user and assign full permissions.
g. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
h. Right click on HKEY_LOCAL_MACHINE and click on permissions.
i. In the Permissions window, please select each user and assign full permissions.
j. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
k. Right click on HKEY_USERS and click on permissions.
l. In the Permissions window, please select each user and assign full permissions.
m. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
n. Then right click on HKEY_CURRENT_CONFIG and click on permissions.
o. In the Permissions window, please select each user and assign full permissions.
p. Then click on Add and type everyone and click on OK. Then select everyone and assign full permissions and click on Apply and click on OK.
q. Close the Registry editor.
13. Then Click on start and click on run. In the run window type MSCONFIG and press enter. In the system configuration Window, please click on the Startup Tab and then click on Disable All and then click on Apply.
14. Then click on the Services tab and then check the box “Hide all Microsoft services” and then click on Disable all and then click on Apply and then click on OK.
15. Please restart the computer. Then click on Start and click on run. In the run window type Services.msc and Press enter.
16. In the services window, please right click on each service mentioned below and click on restart.
a. Windows Image Acquisition
b. Shell Hardware Detection
c. Remote procedure call (RPC)
17. After restarting the above services download the drivers from hp.com and start the installation.
Once the installation is completed, please try to scan and check.
Please follow the steps given above and that should resolve the issue.
If the issue still persists, please follow the steps given below:
1. Click on Start and click on Run. In the run window, please type services.msc and click on OK.
2. In the services window, please right click on the “Windows Image Acquisition Service and then click on Properties.
3. In the Properties window, please click on Dependencies window and check the dependencies.
It should be “Remote Procedure Call” and “Shell Hardware Detection”. If you find anything else, then you will have to change the dependencies of the services.
4. Close the Properties window and then make sure the Remote Procedure Call service and the Shell Hardware Detection services are Started. If any of these services are not started, please restart these services and then restart the Windows Image Acquisition service.
5. Please close the services window and then click on start and click on run. In the run window type regsvr32 shimgvw.dll and press enter.
6. You will see a Popup window on the screen, click on OK and close the window and then try to start the Windows Image Acquisition service.
If the Dependencies of the Windows Image Acquisition service is different from the one mentioned above, then please follow the steps given below to change the dependencies:
a. Click on Start and click on run. in the Run window type Regedit and click on OK.
b. In the Registry window, please go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\stisvc
c. In the right hand side of the Registry editor window, please right click on DependOnService and click on Modify.
d. Then in the Value data filed enter
RpcSs and press enter and then type
ShellHWDetection
e. Then click on OK.
f. Then go to services and try to restart the Windows Image Acquisition service.
Afetr restarting the Windows Image Auquisition service, please try to reinstall the printer drivers.
Please follow the steps given above and that should resolve the issue.
Thank you.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Laptop (Running Windows 8.1) no longer able to print and now see message Active Directory Domain Services is not available

Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-Chris

Hi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

I cant connect my ipod 5th gen to my laptop running windows 7

I have a 5th gen ipod touch and my laptop running windows 7 wont recognise it as a device. Any ideas ?
Also it wont connect using the bluetooth as it cannot find the driver.

Did you look here:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I cannot sync my iPhone 4s with my Windows 7 laptop running Outlook 2010

Before upgrading to iOS 7, I had no problems with syncing my calendar automatically between my iPhone 4s running 5.1.?? and my calendar on my Windows 7 laptop running Outlook 2010. The calendar resides on the laptop. There is no exchange server.
When I updated to iOS 7, I had to update my iTunes as well. About a week later, I noticed that the calendar events entered into my laptop were not showing up in my iPhone. I got more and more frustrated with the <insert expletive> iOS 7 look and feel, and this just is just the straw that broke the camel's baclk. We're not talking about a feature not added, but a feature broken on purpose. If I cannot get this working, I'm going to Android.
I have tried multiple settings in the iPhone: turning iCloud on and off. All items are checked in the settings panel on iTunes and Outlook. I have read several threads in this support area, followed directions, and to naught. Several web sites have stated that it is not going to work again. I hope that not to be the case, and that the folk here may have a solution. I have updated the phone to 7.04 to no avail.
Thanks in advance,

I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

On my laptop running windows 7 most of the information has disappeared from the window - headings (file, edit, view, etc), address bar and navigation buttons - all i can see is tabs - how do i get the missing items to display

On my laptop running windows 7 all the info displayed at the top of the homepage window is missing. All headings, i. e. File, Edit View, etc. are gone. There is no address bar. There is no home button, refresh button, etc. My wife was using the machine when it happened so I don't know what she did. How do I restore these features?

F11 did not work F10 did. ThaNK YOU FOR THE HELP

How can I sync my Iphone contacts with laptop running Windows 7

I have a laptop running Windows 7 and would like to sync my Iphoneand ipad contacts with Windows Live, which is not possible. Microsoft have told me to download a WOA app for each device and subscribe to Office 365. Then use an exchange program within Outlook. Is there another simpler and cheaper method. The Office 365 sub is $99pa. Can I use icloud?

Hello there, Darrelk.
The following Knowledge Base article has information for syncing from your iOS devices:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically:
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Can't Update CS4 on New Laptop Running Windows 7 64bit

I just upgraded a 2 year old slow laptop running 32 bit Vista to a brand new Asus G73JW laptop running Windows 7 64 bit. It is a really fast laptop with 8G RAM, 1.5GB dedicated graphics card, full 1920 x 1080 HD res, solid state drive for operating drive etc. It is a beast of a laptop that boots up fully in about 10 seconds and it was built for HD gamers. Needless to say I am pretty excited to get to work on my favourite Adobe software, which is Premiere Pro and Photoshop mostly.
Everything on the laptop works great but... I installed my CS4 Production Premium without a problem, however, the Adobe Updater will not work. I tried it about 10 times now, rebooting, trying various programs to try the updates etc, to no avail. They are very important updates, as the software will not function properly in several programs without the updates. I can't find anything about this specific issue, has anyone had this problem with Windows 7 64 bit?
FYI everything worked fine with the Vista 32 bit, including updates.
I am pretty frustrated now and I just want to start using the software, and I would really appreciate any suggestions anyone may have.
I already have an e-mail in to Asus to find out if the latest NVidia GTX 460M graphics card driver can be updated on my system. There are a few other drivers I am looking into updating as well to see if that will help.
Thank you in advance,
Aaron

All Adobe updates start here and select product, install in number order, updates may not be cumulative http://www.adobe.com/downloads/updates/
As to your overall problem, Win7 has a lot of automatic security settings that you may need to fix
I don't know what those may be, but some general information...
More Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Soluto for startup)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm

Running HP Deskjet F380 on a laptop running Windows 7

Similar Messages

Maybe you are looking for