SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have designed the SSIS Package in 2012 Version. and i have deployed into the Integration Server,using Project Deployment Model.
In the SSIS Pacakge we are calling the batch file using Execute Process task.
when i am Executing the SSIS pacakge using Visual Studio(Sql Server Data tools) which is working fine.
When i Execute the Pacakge uisng Sql server Management Studio,after the Deployment i am getting the below Error message.
ExecProcess task:Error: File/Process "\\Servername\Foldername\batfile.bat" is not in path.
Thanks for your time.
Regards
Prasad

Hi Prasad,
When you say executing the package in SSMS, I think you right click on the package and execute it manually rather than execute it through SQL Server Agent job, right? How did you execute the package from the SSMS on DEV server? Have your also deployed the
SSIS project to the SSISDB catalog on DEV server or you used SSMS tool on DEV to connect to the QA server to execute the package?
When you log into the Database Engine instance, make sure the credentials you used has access on the shared folder which hosts the .bat file. Besides, I think the issue may be caused by the Windows UAC feature which may lower the permissions level of an
administrator to a standard user. So, I suggest that you run the SSMS as administrator to see if it works.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

SSIS-Execute Process task Error in 2012 version _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
        @PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
                                           @EXECUTION_ID=@EXECUTION_ID
OUTPUT,
                                           @FOLDER_NAME=N'aa',
                                           @PROJECT_NAME=N'xxx',
                                           @USE32BITRUNTIME=FALSE,
                                           @REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_ID

Where the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog

Execute Process Task - Error :The process exit code was "2" while the expected was "0".

I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
Executable :      C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1"
the .sql file will be generated at:  C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?

Jwelch,
Thanks for the input,
"Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
           -- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
"FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
          -- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
Thanks again,
Little_Birdie.

SSIS execute process task error on unziping

Hi
I am using 7zip to unzip files in SSIS using execute process task. Here is the configuration of the task:
executable: C:\Program Files\7-Zip\7z.exe
arguments: e default-o\\servername\livechat\unzip\
However, on executing package in BIDS, following error is thrown
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" "e \\servername\livechat\7566_20121009.zip-o\\servername\livechat\unzip\" at "", The process exit code was "2" while the expected was "0".
Can someone help where I made mistake?
Thanks,
hsbal

I have mapped the share to F: and then tested. Unfortunately that doesnt work as well.
I am getting the following error:
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" " F:\*.zip -o F:\unzip" at "", The process exit code was "7" while the expected was "0".
Thanks,
hsbal
Seems like a syntax error. Go through this
http://www.dotnetperls.com/7-zip-examples
Rajkumar

Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Execute Process task Error

Hi All
when i am using the Process execute task in ssis it is failing with the fallowing error
[Execute Process Task] Error: In Executing "C:\Program Files\PuTTY\pscp.exe" "echo y | pscp -sftp -pw Password
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv" at "C:\Program Files\PuTTY", The process
exit code was "1" while the expected was "0".
when i run the same command from cmd promt is succesful
The command is
echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
In Execute Process task i have set the fallowing value
Executeable = C:\Program Files\PuTTY\pscp.exe
Arguments = echo y | pscp -sftp -pw Passwprd
[email protected]:/opt/DSC_6_0_R5/logs/metrics.csv C:\Users\Public\Documents\SurendraData\DRA\PSCPTest\server1A_metrics_SSIS.csv
Working directory = C:\Program Files\PuTTY
what is the issue ? how to solve that
Surendra Thota

The " are necessary to pass in a path with spaces1 st try it in a script. See if that works. If not see this good tutorial: https://sqlserverrider.wordpress.com/tag/execute-process-task/
or
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2013/03/04/integration-services-packages-using-execute-process-task-with-winzip32-exe-fails-intermittently-when-run-under-a-sql-server-agent-job.aspx
Arthur My Blog

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

SSIS - Using Variables in Execute SQL Task Error

The following query in my Execute SQL Task throws the following error when run - [Execute SQL Task] Error: Executing the query "SELECT @columnz = COALESCE(@columnz + ',[' + times..." failed with the following error:
"Must declare the scalar variable "@columnz".". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Query:
drop table tmpNCPCNCDownstreamMaxUtilization3wks
select node, max(utilization) as max_Utilization, DATE
into tmpNCPCNCDownstreamMaxUtilization3wks
from stage_ncpcncdownstream_temporal
WHERE Date BETWEEN DATEADD(day, -20, GETDATE()) AND GETDATE()
group by node, date
order by node
go
alter table tmpNCPCNCDownstreamMaxUtilization3wks add Timestamp varchar(50)
go
update tmpNCPCNCDownstreamMaxUtilization3wks
set Timestamp = 'WeekOf_' + cast(left(Date, 11) as varchar)
go
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
declare @columnz varchar (8000)
go
SELECT @columnz = COALESCE(@columnz + ',[' + timestamp + ']','[' + timestamp+ ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks group by timestamp order by timestamp
go
--pivot contents in @columns
declare @query varchar(8000)
SET @query ='select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in('+ @columnz +')
)as p'
execute (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
update tmpNCPCNCDownstreamMaxUtilization3wks
set timestamp =''
truncate table tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
insert into tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
(Node, TwoWeeksAgo, PreviousWeek, CurrentWeek)
select * from tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
update tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
set average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0))/3
from tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
Scott

Issue is with variable @columnz.
Scope of variables is only limited to the batch and if batch is over Variable is no more accessible.
Reproduce Steps:
DECLARE @columnz int = 0
Go --Scope of @columnz ends here
SELECT @columnz -- Ends up with error
So you have to remove GO keyword. I have commented 2 of them in below:
DROP TABLE tmpNCPCNCDownstreamMaxUtilization3wks
SELECT node
,max(utilization) AS max_Utilization
,DATE
INTO tmpNCPCNCDownstreamMaxUtilization3wks
FROM stage_ncpcncdownstream_temporal
WHERE DATE BETWEEN DATEADD(day, - 20, GETDATE())
AND GETDATE()
GROUP BY node
,DATE
ORDER BY node
GO
ALTER TABLE tmpNCPCNCDownstreamMaxUtilization3wks ADD TIMESTAMP VARCHAR(50)
GO
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = 'WeekOf_' + cast(left(DATE, 11) AS VARCHAR)
GO
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
DECLARE @columnz VARCHAR(8000)
--GO
SELECT @columnz = COALESCE(@columnz + ',[' + TIMESTAMP + ']', '[' + TIMESTAMP + ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks
GROUP BY TIMESTAMP
ORDER BY TIMESTAMP
--GO
--pivot contents in @columns
DECLARE @query VARCHAR(8000)
SET @query = 'select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in(' + @columnz + ')
)as p'
EXECUTE (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = ''
TRUNCATE TABLE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
INSERT INTO tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week (
Node
,TwoWeeksAgo
,PreviousWeek
,CurrentWeek
SELECT *
FROM tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
UPDATE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
SET average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0)) / 3
FROM tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
-Vaibhav Chaudhari

Failed to load Execute Package Task error.

Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.

As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Execute SQL Task Error

I am using the following query in Execute SQL Task
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112) AS [YYYYMMDD])
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END
In parameter Mapping i have created two parameters and in result set i choose my variable.
Result set property is Single Row.
Following is the error message i received,
[Execute SQL Task] Error: Executing the query "SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETA..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Sarvan

I cant see where you've named resultset. try like below to make sure resultset has the name used in resultset tab
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112))
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END AS [Billing Date]
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to call OID delete user process task from AD process definition

Hi All,
I wanted to call OID delete user process task from AD process def. I have created a process task in AD Process def which will be integrated with OID Delete User adapter. How can i map OID related attributes to the adapter api?
Expected inputs for OID delete api :
root DN
orgDN
admin pwd
server
attr lookupcode
XLOrgFlag
sProcessInsKey
UserID
PDataOrg
port
AdminID
SSLFlag
here i cannot map some like : sProcessInsKey
any pointers would be appreciated.
Regards,
Ashok

OID delete user process task from AD process defWhy don't use call Revoke Resource API ?
http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcUserOperationsIntf.html#revokeObject%28long,%20long%29
Use getObject API
Iterate through resultset.
If RONAME == OID User then call revokeObject

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

Execute Process Task error-Unzip Files

Dear All,
I have a SSIS package, that downloads a Zip file from FTP Server and extract and load that information in Sql Server Table. In my case every time I have only one file in FTP Server. There is no possible to get multiple files from FTP Server.
While at the time of executing SSIS package getting error at Execute Process Task(Unzip Files) i.e
Error Description :In Executing "F:\7z\7z.exe" " x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles\" at "", The process exit code was "2" while the expected was "0".
This error message getting while unzip my file.
Can some one help on this issue.
Regards,
Praveen C.
Regards, Praveen

Hi Praveen,
After testing the issue in my environment, I find the issue is caused by the code in Arguments is incorrect.
To fix this issue, please refer to the code below:
x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Similar Messages

Maybe you are looking for