SSIS - Exporting Data into flat files from Oracle Table as batchwise process

Hi All,
Thanks in advance.
I have a Large Table in Oracle Database with some 3 Lakhs record. I need to fetch the 10,000 records for every iteration and export it into the flat file. This process should occur recursively until the table becomes empty.
Hence, For every iteration on flat file to be generated with 10,000 records.
Please help how to proceed further in SSIS.
Thanks
Pyarajan.S

Yes, it always helps if your question doesn't specify the actual requirements...
Use the FOR loop container to control the iterations of the data flow. For each run you read 10,000 rows from the table and dump them in a flat file. Either move the flat file, or use an expression on the flat file connection manager to give them dynamic
file names.
30 million rows is also not a problem by the way, it just takes a bit longer.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

Similar Messages

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

Extracting a flat file from oracle table

I have moved the knowledge module KIM ISO SQL to FileAppend from the Metadata to my project folder.
But when I create an interface mapping the oracle table and a flat file on a different unix server, in the drop down menu , it shows only KIM SQL TO SQL and KIM Control Append.It does not show up the SQL to FileAppend knowledge module option.
What should I do to extract a flat file from oracle table?
Thanks
Hima
Overstock.com

All IKM in the Drop Down Menu are dependent of the target technology.
A question, at this interface, is your target table a file ?

Data convertion while exporting data into flat files using export wizard in ssis

Hi ,
while exporting data to flat file through export wizard the source table is having NVARCHAR types.
could you please help me on how to do the data convertion while using the export wizard?
Thanks.

Hi Avs sai,
By default, the columns in the destination flat file will be non-Unicode columns, e.g. the data type of the columns will be DT_STR. If you want to keep the original DT_WSTR data type of the input column when outputting to the destination file, you can check
the Unicode option on the “Choose a Destination” page of the SQL Server Import and Export Wizard. Then, on the “Configure Flat File Destination” page, you can click the Edit Mappings…“ button to check the data types. Please see the screenshot:
Regards,
Mike Yin
TechNet Community Support

Create flat file from oracle table data

d_adp_num char(10)
d_schd_date char(8)
d_sched_code char(25)
d_pay_code char(50)
d_mil_start char(4)
d_mil_end char(4)
d_duration char(5)
d_site_code char(4)
d_dept_id char(6)
select payroll_id,
schedule_date,
reason_code ,(sched_code)
reason_code, (pay_code)
start_time,
end_time,
total_hours,
site_code,
department_id
from dept_staff
where schedule_date between (sysdate+1) and (sysdate+90)
loading some data instead for the date range.
sched_code - 'Unavailable' if reason_code = 'OD' and 'LA'
pay_code - 'BD Berevevement' if reason_code = 'BD'
'UP Unexcused PTO' if reason_code = 'UP'
'RG' if reason_code = 'SH'
'PTO' if reason_code = 'VA'
these are a few.....
start_time and end_time - convert into military time
based on start_ampm and end_ampm
Based on this, I need help to create a flat file. Attaching sample of flat file and data from dept_staff
If site_code is there then no need to get department_id( see sample flat file)
sample data for flat file
ZZW002324006072012 PTO
0800160008.00
ZZW002428106072012 RG
1015174507.50HM34
ZZW002391606072012 RG
1100193008.50
ZZW002430406072012 RG
1100193008.50 130000
dept_staff table data
PAYROLL_ID     SCHEDULE_DATE     REASON_CODE     REASON_CODE_1     START_TIME     START_AMPM     END_TIME     END_AMPM     TOTAL_HOURS     SITE_CODE     DEPARTMENT_ID
ZZW0024468     6/8/2012     SH     SH     730     A     400     P     850          12
ZZW0000199     6/8/2012     SH     SH     730     A     400     P     850          14
ZZW0023551     6/8/2012     SH     SH     1145     A     930     P     975     GH08     95
ZZW0024460     6/8/2012     SH     SH     515     A     330     P     1025     GH08     95
ZZW0023787     6/8/2012     SH     SH     630     A     300     P     850          24
ZZW0024595     6/8/2012     TR     TR     730     A     400     P     850          90
ZZW0023516     6/8/2012     OD     OD     800     A     400     P     800          95
ZZW0023784     6/8/2012     OD     OD     800     A     400     P     800          5
ZZW0024445     6/8/2012     SH     SH     1145     A     930     P     975     GH08     5
ZZW0024525     6/8/2012     OD     OD     800     A     400     P     800          23
ZZW0024592     6/8/2012     TR     TR     730     A     400     P     850          5
ZZW0024509     6/8/2012     SH     SH     830     A     330     P     700     MK21     95
ZZW0023916     6/14/2012     SH     SH     1100     A     730     P     850          27

user_anumoses wrote:
Any examples, please provide? Thankshttp://www.lmgtfy.com/?q=oracle+utl_file+example
Handle:     user_anumoses
Status Level:     Newbie
Registered:     Jun 9, 2009
Total Posts:     155
Total Questions:     60 (55 unresolved)
why so MANY unanswered questions?

Export CLOB data in flat file from oracle 8i

hi,
I am in a bad situation. The oracle system crashed and i am trying to retrieve from backup. The backup was hot online backup and for some reason didnt happen correctly. Only thing remaining is DBF and redo log. I somehow managed to recreated the control files. But i cannot login to oracle using sqlplus using any user. Only thing that works is server manager and connect as internal.
Now i need to retrieve data from tables having CLOB data to a flat file.
Any suggestions?
using oracle 8.1.

The backup was hot online backup and for some reason didnt happen correctly.How did you verify this?
But i cannot login to oracle using sqlplus using any userDo you get any error?

FM to tansfer data in flat file from presentation to application server

Hi Experts,
Please tell the FM to tansfer data in flat file from presentation server to application server or vice versa in ECC 6.0.
Thanks.

Hi,
This is how you can achieve it:
1. You read the flat file from presentation layer and store the file content in internal table gt_inrec
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gw_filename
      filetype                = 'ASC'
    IMPORTING
      filelength              = gw_length
      header                  = gw_header
    TABLES
      data_tab                = gt_inrec
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
2. Create a new file at the application server:
OPEN DATASET p_ofile FOR OUTPUT IN
TEXT MODE ENCODING DEFAULT.
3. Transfer the content from the internal table into the file at the application server:
    LOOP AT gt_inrec.
      TRANSFER gt_inrec-record TO p_ofile.
    ENDLOOP.
Hope it helps,
Lim....

OWB - Flat file to oracle table

Second message, please read.
OS- Microsoft windows 2000 5.00.2195 Service Pack 2
OWB client---9.0.3.33.0
OWB Repository--9.0.3.0.1
Database--oracle 9i Enterprise Edition 9.0.1.3.1 with the partioning option Jserver Release9.0.1.3.0
OEM--9.0.1.0.0
I have created mapping between the source(flat file)and target(oracle)using Oracle Warehouse Builder. Mapping was validated, configured and it successfully generated without errors. The ‘Deploy’ button and the ‘Run’ button are disabled. How can I run/deploy this mapping ?
The above OWB copy was downloaded from the Oracle corp website. Is this version an evaluation copy? Alternatively Is this a beta copy ?
Please help.

Dear All,
I have a problem with loading flat files to oracle tables using OWB 9.2
i created a map with my flat file as a source and my oracle table as a target,and i created a connector between the target location and the flat file location.And i deployed the connector and registered the flat file location using my PC information and the path of the files on my pc.
I generated the map and saved the .ctl file and deployed the map,and hence trying to load the ctl file using the sql loader as the following:
C:\Documents and Settings\CORAL 2000>sqlldr owb_rt_rep/owb_rt_rep@ofsa
control = D:\oracle2\ofsa\owb\codegen\BM_DEBIT_CARDS_DAT_MAP.ctl
---where owb_rt_rep is my runtime repository user.
I got the following error:
SQL*Loader-350: Syntax error at line 18.
Expecting "(", found ".".
INTO TABLE "{{TRG_LOC1.Schema}}"."BM_DEBIT_CARDS_DAT"
--where trg_loc1 is my target location and bm_debit_cards_dat is my target table.
I tried to grant from the target schema the privelages to the runtime user incase its the problem,but still it didn't work.
Any ideas??
Dina Nagia
Message was edited by:
Dina Nagia

Map FLAT file to oracle table using 9.04 version - PLS HELP!!!!

Hello all
I am having a problem with mapping a flat file to oracle table. The validation is successful, when I go to Project/Deployment manager. Try to deploy the mapping itself and the target table. It said succesful, and the last step is another "Deploy", this one is fail. Saying could not locate the file (which is a flat file) , but it is there on the server.
I have read all the help on line and follow what they show me, but still not work
Any ideas? Please provide detail answer if you know it.
Thank in advance

Hallo,
just give a rights on connector
Variant 1
1. connect to user sys
2. grant read,write on directory <connector_name> to <target_schema>;
or
Variant 2
1. as user sys or system give CREATE_ANY_DIRECTORY to <target_schema>
2. manualy make CREATE DIRECTORY <connector_name> as '<full_path_to_directory>';
and enjoy :)
PS: <connector_name> you can take from script CREATE_TABLE wisch in Generation phase was created!
Kirill

Can we cleanse and transform data at flat file or external table level?

Hi,
I have some data that I want to cleanse and transform. I don't want to cleanse it after i populate the external table, I want to get done with it at flat file level or while populating the external table. Can we cleanse and transform data at flat file or external table level through Oracle or OWB 11.2? Is it possible to run a conditional load (i.e. having a where clause or if-else-then) for an external table? Can we call oracle functions for an external table at the time of creation?
Thanks in advance.
Regards,
Ann.

Hi Oleg,
Thanks a lot for the clarification. :)
So is there a way that I can clease the data within the text file through Oracle or OWB? I have datatype mismatches in the data and most of my data is getting rejected because of that. The way I can think of, for solving this problem, is to create the external table with all fields with datatype varchar and then cleansing the data. But it doesn't seem very effecient plus it will get very complicated because I have almost 80-90 fields.
Any help?
Thanks and regards,
Ann.

Conversion of fixed length flat files to oracle table

hello friends
Please help me getting the code for conversion of fixed length flat files to oracle table
Should the tables be pre-defined ?????
In this case the de-limiters are variable length spaces and not commas.Please help me with the same
Regards,
-Mahesh

You can use SQL*Loader to load fixed-width files into Oracle. Instructions on writing appropriate control files are in the Oracle Utilities manual
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch03.htm#1004687
You can also use external tables, assuming you're using 9i or later (the syntax for external table definitions is nearly identical to the syntax for SQL*Loader control files).
You'll need to create a table definition in Oracle. You can either create a "normal" table and use SQL*Loader to populate it or you can create an external table definition.
Justin

Export data to flat file with no delimiter

Hi I've 3 columns in a view that i want to export to a flat file. I don't want the flat file to contain any delimiter such as commas , tabs etc..
I am using fixed width with the following setting
Header row delimiter {CR}-{LF}
Advance Options :
InputColumnwith 125
InputColumnwith 187
InputColumnwith 7
When i preview that data it looks correct , divided up into 3 columns
However when the data is exported to the flat file i get just one long string in the flat file on the first row.
What do i need to do to get the end of line characters to be identified
Thanks In advance

Column delimiter is here
Otherwise header row terminates a file line
Arthur
MyBlog
Twitter

Problem to Load the data Flat file to Oracle table on Linux Machine

hi,
when i change the path of source flat file from windows to Linux machine. Now it gives the error. Basicalyy this file will load the files names into Oracle table. but in windows path its fine. All things r running fine in Linux. when i run the interface it gives this>>>>>>>>
SQL*Loader: Release 11.2.0.1.0 - Production on Wed Dec 19 16:40:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12162: TNS:net service name is incorrectly specified
Thanks
Regards,
Edited by: AMSI on Dec 19, 2012 6:01 AM

I assume you're using the "LKM file to Oracle SQL Loader".
For test purpose, can you just try with "LKM file to SQL" (slower) ?
We could check if the problem comes from the SQL Loader.
Your unix server has access to the oracle database ?

Help to export data into a file

Hi,
I am having more than 200 columns in a table. Client wants to export the data into a file with all 215 columns data. When i write the select * from tablename into a spool file. It is getting the data into a multiple lines however client wants each record into a single line.(right now records are getting into multiple lines). I tried to use to_nclob(columnname1)....to_nclob(column215), this way it is getting a single line for each record but it is taking much time(means in a table we have 10M records and explain plan is showing 3 days to export the file). Could you please help me how we can achieve these type of functionalities.
Thanks in advance

user586 wrote:
Hi,
I am having more than 200 columns in a table. Client wants to export the data into a file with all 215 columns data. When i write the select * from tablename into a spool file. It is getting the data into a multiple lines however client wants each record into a single line.(right now records are getting into multiple lines). I tried to use to_nclob(columnname1)....to_nclob(column215), this way it is getting a single line for each record but it is taking much time(means in a table we have 10M records and explain plan is showing 3 days to export the file). Could you please help me how we can achieve these type of functionalities.
Thanks in advance
Hardly surprising it's taking ages to export 10 million rows, if you're doing it through SQL*Plus, as that involves transporting all the data over the network to the client, which is then rendering all that data in the display (which can be slow to scroll, depending on the size of the window) etc.
Better to get the database to access the file system directly, using UTL_FILE (though this does mean that the file is produced on the server) and then transfer the resultant file to where it needs to go.
Example of a generic template to use as a starting point...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;
This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.csv');
PL/SQL procedure successfully completed.
Output.csv file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10
The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

SSIS 2008 R2 - Export data to Flat File in another server

Hello Everybody,
I'm trying to export data from a table in database server to flat file in another server, however it is happening the error Access Denied. I'm using SQL Server Integration Service 2008 R2 to do this.
I've checked all the ways that's happening could the level of security and could not resolve.
Please could someone tell me what I'm missing in this case?
Following error log:
SSIS package "AtualizarDados.dtsx" starting.
Information: 0x4004300A at Gerar arquivo, SSIS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Gerar arquivo, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Gerar arquivo, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Gerar arquivo, Geração de Arquivo [63]: The processing of file "\\targetserver\Export_File\Export_File.txt" has started.
Warning: 0x80070005 at Gerar arquivo, Geração de Arquivo [63]: Access is denied.
Error: 0xC020200E at Gerar arquivo, Geração de Arquivo [63]: Cannot open the datafile "\\targetserver\Export_File\Export_File.txt".
Error: 0xC004701A at Gerar arquivo, SSIS.Pipeline: component "Geração de Arquivo" (63) failed the pre-execute phase and returned error code 0xC020200E.
Information: 0x40043008 at Gerar arquivo, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Gerar arquivo para DMZ, Geração de Arquivo [63]: The processing of file "\\targetserver\Export_File\Export_File.txt" has ended.
Information: 0x4004300B at Gerar arquivo, SSIS.Pipeline: "component "Geração de Arquivo" (63)" wrote 0 rows.
Information: 0x40043009 at Gerar arquivo, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Gerar arquivo
SSIS package "AtualizarDados.dtsx" finished: Success.
Regards,
Antonio Estima

I got after using domain user.
Thanks to all

SSIS - Exporting Data into flat files from Oracle Table as batchwise process

Similar Messages

Maybe you are looking for