SSIS file create file is corrupted on server but good from pc
Still in development so running from VS 2008 not from Integration Services. The package extracts from SQL to create a file in FTP site. When I run the package from my pc all is well. But, when I run on the server I get "_x003C_none_x003E_4989_x003C_none_x003E_"
for the value in every column and row. The row count seems to match, so I would assume the extract sp is good, but not the file creation. I'm wandering about an encoding difference between the server and the pc.
Hi GeRidge,
Sorry for the delay.
The issue should be the known issue that SSIS may automatically change the text qualifier of the Flat File Connection Manager from “<none>” to "_x003C_none_x003E”. To work around this issue, you can remove <none> from the “Text qualifier” textbox
and keep it blank.
If you use SSIS 2008, the fix for this issue was first introduced in CU6 for SQL Server 2008 SP1. If you use SSIS2008 R2, the fix was introduced in CU1 for SQL Server 2008 R2 RTM.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support
Similar Messages
-
SWF File not working after upload to server, but works on local system
HELP PLEASE.....I have created a Fla and exported a swf file
from Flash 8 and Export (Flash 6). I can preview the page in
Dreamweaver just fine, but when i upload it and the html file, it
isn't showing up. It leaves a blank spot on the page. It is just a
simple banner with graphic clips and motion tween text, with image
bgd. All images are jpg.
I have tried:
1. Using a full link to the swf file.
2. Removed drop-shodows in swf file
3. convert to Flash mx 2004 file
4. Exported to higher Flash version to see if the flash
player was an issue.
5. Exported with no dashes in name
6. Added Scr file into Dreamweaver
7. Made a new test file to see if it was something in the
current html doc, same result.
8. Tried viewing on a pc, same result. Created on mac.
Here is the test page if anyone wants to take a look.
THANKS FOR ANY ADVISE.
Test
Page LinkThe link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file. -
I created a template file in DreamWeaver cs5. It is OK. and it looks like this, with Pink box showing the editable region. http://smsoftsolutions.com/downloads/test.jpg
Now the problem is, when I create a NEW html file from this Template, in the DESIGN view, the template contents are shown in a flowing mode. ie. Absolutely positioned DIVs are showing in a disorderly way, as shown in this screenshot. http://smsoftsolutions.com/downloads/test2.jpg
When I preview it in browser, it is showing as I expect. But only in the design mode, it is showing in a relatively positioned way.
Can anyone tell me what I should do in the dreamweaver settings, to show the layout in a WYSIWYG way?Hi,
Thank you for your reply.
If I post the pages alone, the link to the images will be broken.
The css files also will be broken.
The css file should be in the folder css, images should be in the folder home_images, and template file should be in the folder templates.
The link to three files are:
1. HTML FILE
http://smsoftsolutions.com/downloads/t.html
2. TEMPLATE FILE
http://smsoftsolutions.com/downloads/vetiver_master.dwt
3. CSS FILE
http://smsoftsolutions.com/downloads/css/vetiver_css.css
Sincerely,
Tomy Sebastian
> -
Hello team,
I have a project that I need to do, what is the best approach for each step?
1- I have to create a table in Microsoft SQL Server.
2- I have to import data/ tables from Microsoft Excel or Access to Microsoft SQL Server. Should I use Microsoft Visual Studio to move data from Excel or Access?
3-I should populate the created table with the data from the exported data.
4-How should I add the second and third imported table to the first table? Should I use union query?
After I learn these, I will bring up the code to make sure what I do is right.
Thanks for all,
Guity
GGGGGNNNNNHello Naomi,
I have imported all the tables into SQL Server,
I created a table:
CREATE
TABLE dbo.Orders
Now I want to populate this table with the values from imported tables, will this code take care of this task?
INSERT INTO dbo.Orders(OrderId, OrderDate)
SELECT OrderId, OrderDate
FROM Sales.Orders
UNION
SELECT OrderId, OrderDate
FROM Sales.Orders1
Union
SELECT OrderId, OrderDate
FROM Sales.Orders2
If not, what is the code?
Please advise me.
GGGGGNNNNN
GGGGGNNNNN -
Navigation not working in Weblogic Server but working from JDeveloper.
Hi
I created a simple application with some page navigations (some declarative and some dynamic using Managed Bean).
The navigation works fine when I run from JDeveloper. (Local System)
So I deployed the application to the WebLogic server (Local system with a domain configured with ADF.)
The pages are getting rendered correctly, bu on button clicks, the navigation is not happening from any of the pages.
Could I have missed something or is there a way to track what the problem might be?
JDev : 11.1.1.3
Web Logic Server : 11gR1 (1.3) which comes with JDeveloper
Thanks for any help.
SameerHi John
I am not using task flows. I just have some jspx pages defined in the unbounded task flow adfc-config.xml connected with navigation.
I run from JDEveloper by right clicking on the jspx files.
The URL when run from jdeveloper is as follows.
http://127.0.0.1:7101/SessionsPOC-ViewController-context-root/faces/MainPage
From Weblogic server I am using the link given in the Testing tab of the weblogic administration console.
The URL is as follows.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root (default)
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/MainPage.jspx
Actually, the URL given in the weblogic testing tab is not runnable. I am changing the link as follows to be able to run it.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/MainPage.jspx
I have defined the MainPage.jspx in the web.xml 's Welcome page. But it is not taking it I guess.
Also, I am able to run the other page by giving the following url. But the navigation buttons are not working in that page also.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/SecondPage.jspx
Thanks
Sameer -
Odd error when 6i report run from server but not from pc
Getting error:
REP-0065: Virtual Memory System error. REP-0200: Cannot allocate enough memory. cavaa 22
running a report from the web server via URL / cgicmd.dat file
report runs fine from developer tool, naturally
both windows boxes, server & pc
report has single ref cursor query from pacakged procedure returning 4 column record type, all defined in same package
order of columns all appear to be the same, datatypes too
ideas?Another developer created a new function that my ref cursor query used.
It had an error, thereby causing the ref cursor to fail.... the report failed.
I think more error handlers are necessary. -
On a single Windows 2012 R2 server I have installed SQL 2012 and SharePoint 2013 SP1 with the latest update roll ups. When I remote desktop to the server using the farm and site collection admin account and open page http://server_name_here using
Internet Explorer, I'm able to see newsfeeds and document libraries.
If I connected to a separate Windows 7 machine as the farm and site collection admin account and open page http://server_name_here using Internet Explorer, I'm able to view the SharePoint pages except I cannot see any newsfeeds or document libraries.
There's just blank space where they should be. I have repeated this process on several other machines that are not the server and get the same result on every machine (I've tried other servers, desktops, adding the SharePoint site to the trusted sites list
in IE, even using firefox). I'm using the same account as I did when I logged onto the server directly. Any thoughts as to what's going on?
Thanks!Thanks for the idea, Harsh. What am I looking for?
It is currently set to the default of http://server_name and http://server_name:port_number (the latter is for Central Admin).
When I have access to the server, I have always done so the same way, using http://server_name. This was true when I access it from the desktop of the server itself and when I tried to access it from other desktops and servers (the machines where I had the
issues with the libraries and feeds not showing up). Are there other values I should add?
I have not tried to add http://server_FQDN as we don't plan on using that to access it but if you think it will help I would be happy to add it. -
Disk Utility 'Disk Image from Folder' looses file create date?
Hi,
I have been working on creating backups that maintain the files' create dates. I have found the following anomoly using Disk Utility.
If I create a Disk Image From Folder, the create dates of all files are changed to be the same as the last modify dates. Not what I want.
If I creat a Blank Disk Image, and then using Finder to copy the files to the Disk Image, the create dates remain unchanged.
I can then burn the backup CD's with the Disk Image and the files' create dates are maintained. So, future restore from the backup CD will contain the original files' create dates.
Does anyone know if Disk Utility's Create Disk Image from Folder is supposed to loose the files' create dates? What other file attributes are being lost? Mac OS X maintains all of these attributes, and create dates via Finder copies, I would expect the Disk Utility Create Disk Image from Folder to do the same.
Bob HortonTo follow up on this post, I know at least part of the answer. The difference between the two becomes clearer if you read the documentation (man pages) for hdiutil and asr. Image 1 will be created in file mode, whereas image 2 will be in block mode, ie bypassing the file system. Image 1 will consist of a series of files, whereas image 2 will contain a series of blocks, mirroring the original layout of the hard disk.
Technically the latter should be faster to restore (in block mode), although Apple recommend the first procedure (see man page for hdiutil). I haven't seen any evidence that images created in block mode can be mounted or restored, although you might be able to burn such images to a optical disks if applicable.
As I've pointed out in another thread (http://discussions.apple.com/thread.jspa?threadID=1508199&tstart=0) I believe that this functionality should not be offered in disk utility, and I consider it a serious bug. -
PDF file created from Oracle Report is attached wrongly
Hi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2, document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
BuntoroThe code looks absolutely good. I have the same code working in my system. Only difference is I use TRUE and DBMS_LOB.Session for the BLOB I use to read from the BFILE.
I can suggest one more way to handle to binary attachments if you are on Oracle 9i DB are later versions.
procedure attach_document (p_document_id in varchar2,
p_display_type in varchar2,
p_document in out nocopy clob,
p_document_type in out nocopy varchar2)
is
l_nid number;
l_directory varchar2(100);
l_filename varchar2(100);
l_content_type varchar2(100);
l_src_offset binary_integer := 1;
l_dst_offset binary_integer := 1;
l_err_msg varchar2(100);
l_amount number;
l_bfile BFILE;
l_blob BLOB;
l_clob CLOB;
file_not_found exception;
pragma EXCEPTION_INIT(file_not_found, -22288);
begin
l_nid := to_number(p_document_id);
l_directory := trim(wf_notification.GetAttrText(l_nid, 'ATTR_DIRECTORY'));
l_filename := trim(wf_notification.GetAttrText(l_nid, 'ATTR_FILENAME'));
l_content_type := trim(wf_notification.GetAttrText(l_nid, 'ATTR_CONTENT_TYPE'));
l_bfile := BFILENAME(l_directory, l_filename);
dbms_lob.createtemporary(l_blob, true, dbms_lob.Session);
dbms_lob.createtemporary(l_clob, true, dbms_lob.Session);
begin
dbms_lob.FileOpen(l_bfile, dbms_lob.File_Readonly);
exception
when file_not_found then
l_err_msg := to_char(sqlcode)||' - Attachment File "'||l_filename||'" is not found.';
raise_application_error(-20002, l_err_msg);
end;
dbms_lob.LoadBLOBFromFile(l_blob, l_bfile, dbms_lob.LobMaxSize, l_src_offset, l_dst_offset);
dbms_lob.FileClose(l_bfile);
-- Encode the BLOB content to BASE64 and attach to notification
wf_mail_util.EncodeBLOB(l_blob, l_clob);
l_amount := dbms_lob.GetLength(l_clob);
dbms_lob.Copy(p_document, l_clob, l_amount, 1, 1);
-- Mention an appropriate Content Type so that Notification System
-- understands the attachment content
p_document_type := l_content_type||'; encoding=base64; name='||l_filename;
end attach_document;Here I read the BLOB from the filesystem and base64 encode it before giving it to the Mailer. Please note that this is a PLSQLCLOB based attachment as against PLSQLBLOB that you are using.
Thanks - Vijay -
PDF file created from Oracle Report is created wrongly using dbms_lob
Hi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2,
document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
BuntoroHi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2,
document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
Buntoro -
Dynamically creating file using variable
HI, i am facing an issue in creating file on run time using variable.
i have a variable FileName. In refresh tab i have written a query like SELECT TO_CHAR(SYSDATE,'YYYY,MM,DD') || 'TEST' FROM DUAL. i tested the variable and its value is correct.
i have created an interface to extract the data from table and store it in file. i have assigned variable FileName to the file.
Now when i run the interface...the file is created but the header is created in different file and its name is ambiguous e,g(19) and the data is placed in other file with the name which is the value of variable FileName.....
ISSUE is two ODI creates two files one for header only and other for data....
when i run my interface in a package the file created perfectly ..... but i dun want to use package i want to create file through running interface onlyone file name is some number like 19.txt and other filename is 20121211_TEST.txt (this name is coming from variable).....
however when i create a package with variable and interface,only one file is created 20121211_TEST.txt (header and data are not created in separate files.)
create header (ID,
NAME,
DEPT)
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=TARGET_FILESNP$CRLOAD_FILE=*E:\tempProj/19*SNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x007eSNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=IDSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=NAMESNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLINE_OFFSET=51SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DEPTSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLINE_OFFSET=101SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CR$$SNPS_END_KEY*/
Edited by: 975356 on Dec 11, 2012 10:57 PM
Edited by: 975356 on Dec 11, 2012 10:58 PM -
File not picking up in FTP server
Hi SAP-XI experts,
2 different files are send to same FTP server but one file was picked but other was not picking.
Error that came while monitoring CC is as below:
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration / structure 'row.': More elements in file csv structure than field names specified!".
Seeing the error we cross check the content of file present at FTP server. But everything was fine,it contain same no.of fields present in Content conversion and even same length.
Solution: I added a extra row in Content conversion "row.additionalLastFields ignore".After that i stop and restart the Communication channel it start picking the file but the Communication channel is still in red.
Can u please tell me ASAP the reason why the file was not picked first and then after adding extra row it started picking.
Thanks & Regards
VijjiHi,
it is related to some problem with the data only...because i too faced the same issue...i was also not able to see the new line when i try to open the same in notepad++ ... may be some other paramters or data of excel/CSV which is avoiding to display the same..in notepad++
also try one more thing...enable the new line characters and see if there is any difference...between the processes and failed files...
HTH
Rajesh -
Reading a csv file stored on a resin web server
String line = null;
URL url2 = new URL ("http://localhost:8080/FYP/"+WebCourse2+".csv");
URLConnection conn2 = url2.openConnection();
BufferedReader in = new BufferedReader(new InputStreamReader(conn2.getInputStream()));
out.println("conn2: "+conn2.getResponseCode());
while((line=in.readLine())!=null)
im using the following code to try and find out whether the csv file is available on the web server but getting the following errors:
C:\resin-2.0.5\doc\WEB-INF\classes\FYP\exam3.java:294: Class FYP.URL not
found.
URL url2 = new URL ("http://localhost:8080/FYP/"+WebCourse2+".csv");
^
C:\resin-2.0.5\doc\WEB-INF\classes\FYP\exam3.java:294: Class FYP.URL not
found.
URL url2 = new URL ("http://localhost:8080/FYP/"+WebCourse2+".csv");
^
C:\resin-2.0.5\doc\WEB-INF\classes\FYP\exam3.java:295: Class FYP.URLConnection
not found.
URLConnection conn2 = url2.openConnection();
^
3 errors
can anyone help?
thanks
tzafnow its telling me that:
C:\resin-2.0.5\doc\WEB-INF\classes\FYP\exam3.java:300: Method getResponseCode()
not found in class java.net.URLConnection.
out.println("conn2: "+conn2.getResponseCode());
can you help?
thanks
tzaf -
.jpg files created on Iphone 4S are not recognized as .jpg files when uplaoding to American Heart Association fund raising webpage? .jpg's from Canon camera uploaded without any problems? The website automatically reduces the file size to <100kb.
I haven't contacted AHA about this issue. The .jpg files created on Canon SLR uploaded correctly, but the photo from iPhone which was emailed to my PC using MS IE. The .jpg was browsed to from my desktop and is submitted. It shows up in draft form then when uploading it fails saying it is not a .jpg file or .png file? I have had other issues in the past emailing iPhone pictures. They were not editable after being sent to a PC. I guess we can retake photos with a non-Apple camera.
-
Regarding file 2 file using BPM
Hi Experts,
In file to file using BPM scenario my file is being picked in the server but it is not displaying again after polling interval. please help me one this issue as early as possible.Hi,
File is picked up from the server is ok, but it does not mean that it reached to IE.
Just go to RWB-Component MonitoringAdapter EngineCommunication Channel MOnitoring. and check the Sender File adapter from there and let us know the status??
If it is in Error it cannot be delievered to IS and BPE, so first check it
Thanks
Farooq.
Maybe you are looking for
-
Slow Web Export in Aperture 1.5.1
I feel a little crazy for asking this, but it seems like web exports have gotten significantly slower since I upgraded to Aperture 1.5.1. I cannot find anything on my machine that would cause this. Has anyone else experienced this? -Fletch PowerMac G
-
Can I move in-app purchases from one iPad to another?
There are a couple of my iPad's apps which I've used to make in-app purchases. If I get a new iPad, then sync these apps to it, will these in-app purchases 'survive'? Or do I have to buy them again?
-
So I am trying to update my Quicktime player so that itunes will open it tells me that I am up to date on the software.
-
WLC from 7.0.116 to 7.4.100 How to avoid H-Reap Problems
Dear All, I would like to know how to avoid the Cisco H-Reap Problem when upgrade directly, and if it occurs 100% in the upgrade. 7.0.98.0 or later 7.0 releases You can upgrade directly to 7.4.100.0 Note If you have VLAN support and VLAN mappings def
-
TS3989 Is photo stream available on a PC running XP os?
When I try to set up Photo Stream in iCloud on the PC by Control Panel/Network Connections iCloud is not listed.