SSIS Jobs:-getting issue The expression for variable failed evaluation.

Hi ,
I have one package where I am having single DFT.in source i am taking query from variable., and destination I am taking destination table from variable.
i have created a package configuration, i have created a job.when I am running I am getting below error
Code: 0xC0019004 Source: LoadArchive Using BIML Description: The expression for variable "V_Archivequery" failed evaluation. There was an error in the expression.
this error is coming for all the variable which need to be changed at run time.
below is the query which will chnage the value of the variable on run time.
SELECT Archivequery,ArchiveTableName,BBxKeyDerExpr FROM Fabrication.dbo.FileMaster WITH (NOLOCK)
WHERE SourceFileName = ?
suggest me some good solution.
Regards,
Vipin jha
Thankx & regards, Vipin jha MCP

Hi Vipin jha,
According to your description, you created one SSIS package with data flow task, you used variable with the expression SELECT Archivequery,ArchiveTableName,BBxKeyDerExpr FROM Fabrication.dbo.FileMaster WITH (NOLOCK) WHERE SourceFileName = ?, when you the
package with sql agent job, you got the error message.
I tried to reproduce the issue on my local machine, but it works fine for me. To troubleshoot the problem, please refer to the following steps:
Make sure the variable can be found in the Variables collection.
Objects in SSIS are case sensitive, please validate that the name of the variable is correct.
If the problem remain unresolved, i would appreciate it if you could give us detailed information of error message, I would be appreciated it if you could provide sample data and screenshot of the package. It will help us move more quickly toward a solution.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Similar Messages

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

The Expression Engine failed to evaluate the expression for a Subportal Act

Anyone seen this error before and know of a fix? We're getting it on our 6.1 MP1 portal after we deployed our custom sso solution.
"62 12-19-2007 12:58:37.292 Error Portal_UI_Infrastructure portal.c27mynrspaxr01.webadm .NET #32 com.plumtree.portaluiinfrastructure.condition.ConditionTypeManager The Expression Engine failed to evaluate the expression for a Subportal Action.
System.NullReferenceException: Object reference not set to an instance of an object.
at com.plumtree.portaluiinfrastructure.condition.ConditionTypeManager.EvaluateExpressionForSubportalAction(AActivitySpace asCurrentSpace, IApplication application, IXPRequest xpRequest, Object ptUserSession) in e:\buildroot\Release\portalui\6.1.x\ptwebui\portaluiinfrastructure\dotnet\prod\src\com\plumtree\portaluiinfrastructure\condition\ConditionTypeManager.cs:line 260 <ptLogMsgEnd>"

As far as i know this is a harmless error. Our portal generated that message every time someone browsed /portal/server.pt.

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

How do you get to the options for export settings with the new quicktime?

I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

How do you get to the options for export settings with the new quicktime?
You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

Caznnot upgrade my iTunes to version 10.4.1---get message---The following install step failed: runupgrade script for Apple mobile device support.--Contact softwae=re manufacturer for assistance

Cannot upgrade my iTunes to version 10.4.1---get message---The following install step failed: runupgrade script for Apple mobile device support.--Contact softwae=re manufacturer for assistance.
Can someone help me?
Thank you.
Gerald

me too did you get any help?

Cannot upgrade my iTunes to version 10.4.1---get message---The following install step failed: runupgrade script for Apple mobile device support.--Contact softwae=re manufacturer for assistance. Can someone help me? Thank you. Gerald

Cannot upgrade my iTunes to version 10.4.1---get message---The following install step failed: runupgrade script for Apple mobile device support.--Contact softwae=re manufacturer for assistance.
Can someone help me?
Thank you.
Gerald

me too did you get any help?

Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis B

Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B

My iPad just recently started a message saying"cannot get mail" the connection to server failed. It won't bring up my yahoo mail.....how do I fix??

My iPad is bringing up a message saying "cannot get mail"the connection to server failed. It won't bring up my yahoo mail but does bring up my other mail...how do I fix?

Other users have been reporting Yahoo mail problems that are not iPad problems. Might be something to try on these links.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

AEBS "Ghost" Router Issue - The Challenge for 2012 (and it's only January)

Yes, it's a bold statement to claim that I have the biggest issue so far for 2012. Why may you ask? Because I've stumped RCN (ISP), Access Media 3 (ISP), Apple Tech Support, and Cisco Tech Support. Here's the challenge for you to see if you can figure it out:
***Also, sorry for the long-winded post. I've spend over 20 hours on this issue and racked up a lot of info to share with you. So please bear with me***
I used to own a Linksys E4200 router (early 2011), which I set up using the wireless network name (for example) "wifi-box". Due to performance issues, I returned the router back to Linksys in April 2011. Shortly thereafter, I purchased a used AESB. I performed a factory reset (not a hard reset, as I know the difference between the two) before setting up my network. Things worked great from April to Dec. 2011.
On Jan. 1st, 2012, the building that I live in switched ISPs. I used to have RCN, and now have Access Media 3 (AM3). Both provide the same type of connection - cable - and both provided me with a modem (not sure the model of the one that RCN provided to me, but AM3 gave me a Surfboard 5101N...shudder). Once the transition from RCN to AM3 took place, I performed another factory reset on the AESB before setting up my my network from scratch.
Now, here's where things get start to get weird. I "Created a wireless network" on my AESB, entered in the name "wifi-box" (to keep it the same as before) as the wireless network name, and followed the rest of the steps until I updated the router. Shortly after the AESB restarted, I received a "Dual (or double) NAT" error right off the bat. Looking into the issue futher, there were now 2 wireless network names called "wifi-box"?!? Huh?!? The actual name isn't "wifi-box", but was something quite unique. So it was easy to tell that it was (once) my wireless name.
The next 5 hours were a blur of reconfiguing, resetting, unplugging, etc. anything that is connected to my network. Nothing worked. During all of this, I also switched the name of the AESB to (for example) "apple-wifi".
As a last resort, I unplugged everything - the Surfboard, the AESB, wiped all Airport Util profiles off my 2 Macs, wiped my profile off my 1 PC, shut them down, did the same for my iPhone 3G, shut off the power strip that the modem and AESB were connected to, and unscrewed the coax cable from the wall. I had a friend come over with his laptop, which he never brought over before, and had him search for a wifi signal. As you would guess, "apple-wifi" didn't appear...BUT "WIFI-BOX" WAS AVAILABLE TO CONNECT TO!!! Arrrgggg!!
At this point it seems that the profile is somewhere outside of my condo. But where???
Moving along, I used a tool called WiFi Stumbler to see if that could help shed some light on my issue. What I found was unheard of. The wirless name "wifi-box" was linked to a Linksys router. Once I discovered this, I logged into my Linksys profile (192.168.1.1) to see if it still worked. IT DID!!! However, that was short lived, because as soon as I clicked on a tab, I was booted out. On top of that, I couldn't log back in. Not sure if this is because it was looking for the Linksys router or not. Whatever the reason...it's just flat out weird.
Because the password to log into my old Linksys profile was the same, it somewhat leads me to believe that someone doesn't have the same wireless name that I do.
Over the past two days, I talked to RCN, Linksys, Apple Tech, AM3, had an AM3 tech out to look at it...no one knew what the issue was. When I talked to Apple, and they thought it might be the Surfboard. The tech said that the Surfboard is also a router, which is why the "dual NAT" error is taking place. However, I then spoke to AM3 and they told me the Surfboard was only a modem. I looked it up online, and it's just modem. Also, I was able to get rid of the "dual NAT" error, but yet I still cannot connect.
My current error msg is: "Airport has the self-assigned IP address 169.XXX.XXX.XXX and will not be able to connect to the Internet". The AirPort indicator light in my Network Preferences is orange, but the AESB indicator light is green (and is reporting no issues).
To end this, (if you're still reading), any help that you may have is greatly appreciated. Everyone I spoke to is stumped. I'm not sure where to go next from here. If you know anything, please let my know . As a quick recap, here are my current settings:
Devices:
     1) MacBook Pro (2011), OSX Lion;
     2) MacBook (2009), OSX Snow Leopard;
     3) IBM Lenovo PC, Win XP SP2
     4) iPhone 3G (iOS 4.2)
Modem:
     Former modem: unknown
     Current router: Surfboard SB5101N
Router:
     Former router: Linksys E4200 (wireless network name "wifi-box")
     Current router: AESB - Apple AirPort Extreme Base Station - Simultaneous Dual-Band MC340LL/A (wireless network name "apple-wifi")
     # of Router in my condo: 1
ISP:
     Former ISP: RCN
     Current ISP: Access Media 3
Thanks and good luck (to you and me)

Thanks Tessarax,
Thanks for the reply, and no worries about the long form answer. Yesterday, I went through your process twice (for good measure). I also unplugged/shut down everything overnight and tried it once again today. Unfortunately, the results are the same.
Me network is currently up and running, albeit a limited connection. It's still producing the "Double NAT" error. My Internet is set up as follows:
These are the settings for "apple-wifi" in the AirPort Util.:
Connect Using: Ethernet
Ethernet WAN: Automatic
Connection Sharing: Share a public IP address. ("Bridge Mode" and Distribute a range of IP addresses" cause additional errors which brings down the network. These errors include setting a DHCP beginning/ending address and no Internet connection. I tried setting the DHCP beginning/ending address several times, but the AEBS never accepts my entries.)
IP: 10.XXX.XXX.XXX
DHCP: Beginning/Ending Address: 172.XXX.XXX.XXX
DNS: 8.8.8.8, 8.8.4.4
These are the settings for "wifi-box" in the Network Preferences:
IP: 192.XXX.XXX.XXX
DNS Servers: 8.8.8.8, 8.8.4.4
Search Domains: 221am3.com
802.1X: No profiles (I deleted them)
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "apple-wifi"
These are the settings for "apple-wifi" in the Network Preferences:
IP: 172.XXX.XXX.XXX
DNS Servers: 172.XXX.XXX.XXX
Search Domains: 221am3.com
802.1X: No profiles (no profiles were avaible for "apple-wifi")
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "wifi-box"
Two new discoveries that I uncovered yesterday are as follows:
1. 802.1X (under Network Preferences): There were 3 profiles that I deleted from this tab last week. After resetting the network, they came back. Whether they were present or deleted, it didn't affect the connectivity of my network. Just mentioning that these profiles came back after deletion (I deleted them again).
2. Yesterday, the network in my building went down for a few hours. I noticed that neither "wifi-box" nor "apple-wifi" were available to connect to. This is an obvious insight, but it seems that when "wifi-box" is unavailable, "apple-wifi" is unavailable as well. However, 'wifi-box' has always been available even when "apple-wifi" is down. Sounds like my Internet signal follows this path:
AM3 > Condo building > "wifi-box" > my condo > Surfboard modem > AEBS "apple-wifi" > my devices (laptops, iPhone, Xbox, etc.)
Two new questions:
1. What is DHCP Client ID and is this something that I need to provide?
2. Could the cables that I'm using cause any problems? Here's the cable that I'm using and the connections between the devices:
CAT5: Router > AEBS
CAT5e: AEBS > MacBook Pro
CAT6: AEBS > Xbox
If there's other questions or infer that you need, please ask

Outlook clients get "Contacting the server for information"

Hi,
I've recently setup a new production Exchange 2010 Enterprise Edition server running on Windows 2008 R2 Enterprise. Everything is working fine except for user's are getting a pop up in Outlook 2010 that says "contacting the server for information" when fowarding messages with imbedded html. Outlook 2007 user's don't get the pop-up, but it still takes a long time for the message to send. After they click the send button, it just sits on thier screen for about 20 seconds. All other email messages are fine. The messages are small, even a 26kb message will do this. Has anyone seen this before, or have any ideas about what needs to be changed for the messages to be sent out at an acceptable time. All users are configured for cached mode in Outlook and this happens for user's on the same LAN as the server and for user's on a different LAN. At this point, we only have 10 or so user's on the server, but are getting ready to migrate several hundred over.
Thanks,
JScott2

Hi JScott2,
If you test the issue in OWA, will it still take a long time to send? If you use online mode in Outlook, can you reproduce the issue?
The information you mentioned is "Outlook is retrieving data from the Microsoft Exchange server" right? If so, please refer to the suggestions in the following thread:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclients/thread/b2afa738-0fba-4060-892f-6a3917744811
I also suggest you install latest patch of Exchange 2010 and test the issue, Update Rollup 2 for Exchange Server 2010 (KB979611):
http://www.microsoft.com/downloads/details.aspx?FamilyID=6d3ae3e0-3982-46d6-9e9c-7d7d63fae565&displaylang=en
Hope this helps. Thanks,
Elvis

I can't get into the settings for fonts. How do I do that to change the font size?

I had downloaded the latest updated version of Firefox and I ended up syncing it to my Android phone. I went into some kind of settings dialog and accidentally changed my font and text settings and now I can't read any of my Gmail that's in my account on my desktop computer-it's too small. I'm trying to figure out how I can get into the content settings (I have the print out of what I'm to do once I get into the 'options' on the content settings page, but I don't know how to bring up the content settings menu/page). I use my desktop PC for work purposes and I can't use it with the font and text settings the way they are now. I also read where questions are being answered, but no one knows how to find the answers to the questions people are asking. How do we get to the answers that people give us about the question we have asked?
I hope you can help me ASAP so I can change what I need to ASAP. I work on my pc 24/7 for work and it's not helping me when I can't read emails and I can't fix the problem.
Thanks!

Hi!
I followed the directions that were given to me in this forum. The only difference on my desktop PC computer after you click on the three lines at the top right of the screen after signing into your g-mail account, it will bring up the menu and you click on the 'Options' tab. I'm on G-mail and I'm running windows 7 Home Premium; there wasn't a preference tab and the percentage was already set at 100%. It takes you straight to the options menu. You then click on the 'Content' tab if it's not already open, change your font and font size to what you want, and then click OK. It reset those items for me and now I can read my emails. I noticed if you change the font type and size to something other than Times New Roman-size 16 (default font & size), you may have to change the size of font to a higher number (i.e. Arial-18 font size). You just have to adjust them for your preference if you want something other than Times New Roman-font size 16.
Thanks for the help and info. It worked.
Upset2

How to find the definition for variable creation in report painter

Hi expert,
How/where I can find information about the variable created in basis key figure in the report painter?
What is the mean for basis key figure and variable (set variable on/off check ) in the basis key figure?
Please advice.
thank you.
Regards,
Karen

Hi chinks ,
Thank you for the prompt reply.
My question is how to display the plan data for fiscal year 2012 with the version 6 without explicit/hard code to input version 6 when user just only key in the fiscal year 2011?Any method or variable can be done in report painter which do not appear in the input screen?And How ?
I have try include the variable for version in the column but it appear in the selection input screen where i do not want the version to be appear in the selection input screen where everytime need to remember which version.
I also have try to include the version in the column without variable and I need to key in the value version 6 which this is hard coded where I can't analyst for plan data for budget 2011 where it required me every time need to change the value in report painter for version 5 in order to be able to view the plan data for budget 2012.
Please help.
Many thanks.
KH

How do I skip upgrading itunes? I used to have an option, now I can't get past the upgrade for free screen!

I have been trying to access the itunes store for a week now but can not get past the screen to upgrade for free. I do not want to upgrade, I tried but can not install the free upgrade because I am using 10.2.2. I do not want to upgrade I just want to get to the itunes store... how do I get past this screen? There used to be an option to skip the upgrade.

I have an iMac G5 with a pre-Intel processor. My current OS is 10.4.1. When I open my iTunes store function, I get an upgrade to iTunes 10.5 page that does not allow me the opportunity to refuse the recommended upgrade and I don't want it because my processor is not the Intel processor. I can't get past this page to access the iTunes store. I can't find iTunes 9.2.1 online to download, if that is the only solution. I can't believe Apple is forcing me to purchase a new iMac in order to continue using iTunes on my current iMac. I'd like a good answer and solution to this problem.

SSIS Jobs:-getting issue The expression for variable failed evaluation.

Similar Messages

Maybe you are looking for