SSO in Solution Manager 7.1 between webdynpro and abap
HI,
when i try to launch a webdynpro ( http://myhost.mydomain:8000/sap/bc/bsp/sap/crm_ui_start/default.htm) application from abap it's always asking for a logon. Is it possible to have SSO configured?
I have created ssl certificate in strustsso2 and i have the following profile parameter;
icf/ssocookie_mandatory 0
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
login/password_change_for_SSO 1
Thanks
Hello,
If you are installing Secure Socket Layer (SSL) for Secure Network Communications (SCN) you need to have installed
SAP Crytographic software.
https://websmp204.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=Y&EVENT=TREE&TMPL=INTRO_SWDC_IU_CRYPTO&V=INST
Regards,
Paul
Similar Messages
-
SSO from Solution Manager to Wily Enterprise Manager issue
Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
DavinderHello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil -
Share Configuration Manager Entries between WebDynpro and EJB
Hi there,
I have an annoying problem: I would like to have a WebDynpro as full-blown configuration interface for my EJBs. As steted in the docu, it is not possible to share configurations between applications.
With EJB and Web Modules I would just place them in the same Enterprise Application. But I cannot as WebDynpro projects to enterprise applications (as far as I know).
Does anyone have a clou about I could manage this issue?
Thanks!
helgeHi Maksim,
at the link you've provided it is described how to use the Configuration Manager within an EJB Module.
My Problem is that I want to use it from an WebDynpro Application. But there I don't have a META-INF\application-j2ee-engine.xm to configure the dependency.
This itself is not a problem since you can also access the Configuration Manager via JNDI.
My problem now is that the EJB Module (more precise the enterprise application where the EJB Module is included) needs to share the configurtion with the Dynpro. But vi JNDI you only get the ApplicationConfigurationManager - which is application specific.
So the question is how I could share the configuration between WebDynpro and EjbModule...
Regards,
helge -
Does Solution Manager support Service Report for non-abap?
Does Solution Manager support Service Report for non-abap?
We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
I found a document on EWA non-abap but non for SLA.Hi
actually i am in task of setting up ewa for portal.
i had already done with abap components (ewa and sla)
i stronly believe one of the pre-requiste to get sla is EWA.
so i think if u can setup ewa for portal then you can get sla too.
Regards,
Vijay. -
ESS/MSS sso configure between java and abap instance
Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best RegardsHi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS -
Installation Solution Manager error in the step Import Abap
We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo RivasHi,
Check SAP note 898181.
Thanks
Sunny -
Users mapping between EP and ABAP system
Hello
I'd like to ask for some guidance in my quest
Current situation looks like this:
I've configured UME in AS Java to work with LDAP as read only data source. Then I've configured SPNego to run SSO - It works, users from MS AD can log into portal.
Now I have application in WD which authorizes via EP/AD - works fine.
And next step is users mapping between AD and ABAP backend (serving some BAPI's for WD app)
I've found a bunch of help pages starting from
http://help.sap.com/saphelp_nwce711/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm
But somehow it's quite complicated to achieve this mapping. I've tried to set RFC destinations logon type to user mapping but without succes.
Can anyone point me to some more clear example or give path to configure this scenario? Is there a way of configuring this with NWA or some XML file editing is required?
Any help will be appreciated.
BTW: whole environment is in version 7.11
Best regards
MaciejThere is no equivalent to SPNEGO on the ABAP side.
If your goal is to propagate the user, then possible options are:
-> Wait for SAML 2.0 or invest now in a SAML 1.0 provider.
-> Use the same kerberos ticket for the EP as what your ABAP system will accept: route = SNC and 3rd party libraries.
-> Issue SAP logon tickets for the ABAP system from the EP, and use these in your WDA.
Another option is to expose the service with saved logon data in the ICF. If the service is just a wrapper for the BAPI, then you can also consider using trusted RFC between the service and the backend, but this might not be acceptable for your service.
I have only done experimental stuff with this and some of the above is not released yet. Also consider the consequences, even if it "does work"...
Cheers,
Julius -
Error while creating connection between Java and ABAP
Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
MaheshCheck the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay -
Solution Manager E-2-E Diagnostics and BCM 6.0
Hi Everyone,
I'm in the process of implementing Solution Manager and wish to add a SAP BCM 6.0 system as one of the managed systems.
I've installed a few other Solman systems so have some experience are however it has almost always been with Standard SAP ABAP/Java systems.
From what I can see it in SAP Noteu201D https://service.sap.com/sap/support/notes/1010428u201D it says e2e should be possible with SP20, unless I'm misinterpreting the note.
Has anybody implemented this and got it working?
We installed the Diagnostic Agent and the standalone Wily Agent. Our issue is seeing its registration in the SLD and getting it to replicate into SMSY.
Any ideas or pointer would be greatly appreciated.
Regards
Michaelhi,
as per the note it should be BCM 6.0
but sorry i did nt implemented. but refer the below landscape document for E2E , you can get complete picture
[https://websmp106.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000074392009E|https://websmp106.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000074392009E]
jansi -
Solution Manager Installation Fails at step Run ABAP Reports
I'm trying to install Solution Manager 4.0 on Windows 2003 using SQL 2005. The installation fails at the Run ABAP Reports step: Executing ABAP report RADDBDIF
I have logged in manually and run the RADDBDIF job in SE38 but I receive the same error message. My SAPTRANHOST is properly defined and so are the shares. Can anyone help? Thank!
Here's the sapinst_dev.log:
Calling function module: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1065]
CAbRfcImpl::performFunctionCall
Function call was successful.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1066]
CAbRfcImpl::performFunctionCall
Function module call succesful: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:924]
CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:926]
CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:107]
CRfcFuncRep::insFuncIf
Information for application function INST_EXECUTE_REPORT copied to local repository.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:108]
CRfcFuncRep::insFuncIf
Function interface entered into repository for INST_EXECUTE_REPORT
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:622]
CAbRfcImpl::setFunction
Function module INST_EXECUTE_REPORT set successfully.
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setFunction() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PARA, [])
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PROGRAM, RADDBDIF)
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.execute()
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1032]
CAbRfcImpl::callFunction
Executing function call INST_EXECUTE_REPORT.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1056]
CAbRfcImpl::performFunctionCall
Calling function module: INST_EXECUTE_REPORT
ERROR 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1089]
CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1090]
CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1091]
CAbRfcImpl::performFunctionCall
Exception condition "WRITE_FAILED" raised.
INFO 2008-10-21 14:00:35.045 [iaxxbjsco.cpp:561]
CIaJSCo::disconnect_nothrow(000:DDIC:EN:nath02:00::SOL:)
RFC connection closed.
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:408]
handleException<ERfcExcept>()
Converting exception into JS Exception ERfcException.
TRACE 2008-10-21 14:00:35.045
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2008-10-21 14:00:35.045
CJSlibModule::writeError_impl()
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-10-21 14:00:35.45 [sixxcstepexecute.cpp:951]
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </p> </body></html>
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHello Amélie,
Check the file systems if you're not ran out of disk space.
Second, check the database if you've enough storage space left.
Hope it helps.
Cheers,
Satish. -
Use solution manager to create customer message and apply oss notes
Hello All,
Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
Currently, our Solution Manager system is bieng used for Central System Monitoring!
Please let me your your expert thoughts!
Thanks,
AntarpreetHi,
By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
Refer the [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems. -
Comparison between WebDynpro for ABAP vs. WebDynpro for Java ??
Hi,
Can someone tell me when should we go for WebDynpro for ABAP and when WebDynpro for Java. Is there any link where SAP recommends the one for the other.
Thanks in advance
Regards
MukeshHi Mukesh,
Both are having its own strengths!! )
I think it all depends on your project requirement and the availabel resources.
If the developer is good in OOPs ABAP then he must go for Web Dynpro ABAP. But if anyone is good in JAVA then that person should go for Web Dynpro JAVA.
*In Short almost all Features supported in webdynpro ABAP are also Possible in webdynpro Java.
1] Webdynpro Java
Supports,
webservice
RFC Models
Accessing Portal information in Java
Easy sending E-mail
Strictly follows MVC architecture which seperate Business logic and Process flow.
Webdynpro Java is webbased programming model to develop SAP Applications.
Easy to learn
Easy to integrate in Enter prise portals.
Dynanamic Programming
*Easy access to R/3 Via RFC technology (Models)
2] Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
Hope this helps and solve your Problem
Cheers,
Darshna. -
Solution Manager BC sets for Oil and Gas Downstream
I am trying to find the oil and gas BC sets for downstream so I can get the basic SSR config done via a CATT script. How do I find them and install them on Solution Manager. I have tried looking at the BC sets I have but I can not see any for Oil, OGSD or SSR.
Having a similar issue , please share the solution once you find one
-
Solution Manager Docs required (sim files and pdfs)
hello gurus,
i am very new to sap solution manager, i want learn Solution manager (all scenarios).. please provide me sim files or pdfs or links
please help me to learn solution manager.
thanks in advance.
thanks,
ikathianderHi,
Check these links
http://service.sap.com/rkt-solman
http://service.sap.com/solutionmanager --> Media Library
http://service.sap.com/diagnostics
http://service.sap.com/mopz
Here is very good link
https://www.sdn.sap.com/irj/sdn/inf?rid=/webcontent/uuid/16eaf8ea-0c01-0010-c1af-b3febfa33574
http://www.saptechies.com/category/sap-solution-manager/
This will help you a lot.
Searching this forum will give you a lot of material.
Search the forum before posing.
Read rules of forum.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Aug 7, 2008 4:04 PM -
Question about load balancing between Portal and ABAP
Hi,
I have the problem whit load balancing between Portal and ECC (ERC) ABAP
Exist two system:
1) ECC (ERP) ABAP = Backend Module = HR
2) EP (JAVA) = Frontend
The users (9000 users) logon in the EP and run query (data personal) in the ECC. The problem to all user connect in Central Instance and not in the Dialog Instance.
How can balancing the conecction HTTP (EP) to ECC (ABAP)??
I need balancing in the ECC to Dialog InstanceJco -> right. Another possibility is that you use iviews that point to the backend in this case you will need to use a load balanced entry for the backend system in the [system landscape|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8c1e438d7017fce10000000a42189c/frameset.htm] -> SAP_R3_LoadBalancing
If you have ESS deployed on your portal, you will most probably need to do both.
Cheers Michael
Maybe you are looking for
-
How to Make CS6 AEP compatible to CS4 or CS5
Hello , i am new to After Effects. I have created my project in after effects cs6 and now i want ot hand it over to someone else. So can anyone guide me on how to make cs6 file compatible with cs4 and above version? Please help me .
-
Dropdown in ALV Grid (OO)
Hi All, I am populating a dropdown in the ALV grid, Now I have a requirement to fill this dropdown when I press enter button after selecting a value in the grid for a previous column ,I have written the code for this but the values are not getting fi
-
FM for the rating of Appraisal
can any one please tell me the FM for getting the ratings of Appraisal ?
-
My organizer view does not look like the view in the tutorials. The photos are all lined up in a solid mass with no gray space in between. I can't see arrows to view elements of a version set, and the photos are difficult to pick out individually.
-
Question for Dr. Smoke and others: speeding up iTunes
I've put up variations of this question in the iTunes section, now I thought I would see what I could find out if I posted this in a more general OS X Tiger forum... to boil it down, my problem is that when I work in iTunes, the larger the library, t