SSRS 2008 R2 Column Graph, Scalar Axis, Columns Take more than 1 Category
In SSRS 2008 R2, I have created a stacked column graph with two data columns, using a scalar axis with dates. If I have two columns next to one another, everything is rendered fine. If all of my columns have space between them, then the columns
will take more than just the day that they fit.
Here is a pastebin
with a simplified report that exhibits the issue.
When I render the chart, this is what it looks like.
Whereas, I would expect something like this.
Hi clcrutch,
After testing the issue in my own environment, I can reproduce it. Just as you said, if there are two columns next to each other, then all the columns will be displayed on their own location; if all the columns in the chart exist space between each other, then
they will expand as wide as possible until there is no place to display all columns. This is by design.
Besides, if in the second scenario, we can manually add one record in the dataset, and then hide the additional record in the chart to work around this issue. For more details, please see:
Add one new record with adjacent date of MyDate field and unique value of MyStackedValue field in the dataset as below:
INSERT INTO #Temp (ID, MyDate, MyStackedValue)
VALUES (100, '11/24/2013', 1000)
Right-click the series to open the Series Properties dialog box, select Visibility in the left pane.
Using the expression below to control the series Visibility:
=iif(Fields!MyStackedValue.Value="1000",true,false)
If you have any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
BragaActually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
R1 R2
93 74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
R1 R2
78 78Richard -
Could the late 2008 MBP take more than 8GB of RAM?
I just recently upgraded the RAM on my late 2008 15" MacBook Pro from 2GB to 8GB, and this sucker's running like a sports car! So this has me wondering. I have babied this thing, and it is plenty powerful for me but what happens 2-3 more years down the road? I had read that the late 2008 models originally could only handle up to 6GB but do to a fimware update in April of 2010 that capacity was upped to 8GB. Is there ever a chance that the RAM capacity could go up again? If not, why?
you're probably stuck at 8GB - i wish i can upgrade my late 08 Macbook to more than 8GB - tried it, but never worked - gave it to my niece instead.
i don't really think you'd use more if you're just running normal apps.
have a look at the image below - that's my macbook with 16GB and have 9 apps running - see how much I have free?
by the time you need more than 8GB - you'll probably buy a new macbook by then - do remember, new macbooks are still selling with 4GB of RAM installed in them.
good luck -
SSRS 2008 R2 - Add moving average to column group
I have a column group of dollar amounts. The row is a year/month. I would like to add a moving average column to the right of the last 6 months. My SQL Server data source is already complex enough and I'd really prefer not to add a column
there. Is there anything I can do within the report itself? Some way to reference the previous records in a matrix?
Thank you!Hi mateoc15,
According to your description, you have a matrix in your report. Now you want to calculate the average value of last 6 month. Right?
In Reporting Service, we can put custom code into report to deal with complicated logic. Add one more column/row inside of group and call the functions defined in custom code. For your requirement we modified Robert’s code to achieve your goal. We tested
your case in our local environment with sample data. Here are steps and screenshots for your reference:
Put the custom code into report:
Private queueLength As Integer = 6
Private queueSum As Double = 0
Private queueFull As Boolean = False
Private idChange As String=""
Dim queue As New System.Collections.Generic.Queue(Of Integer)
Public Function CumulativeQueue(ByVal currentValue As Integer,id As String) As Object
Dim removedValue As Double = 0
If idChange <> id then
ClearQueue()
idChange = id
queueSum = 0
queueFull = False
CumulativeQueue(currentValue,id)
Else
If queue.Count >= queueLength Then
removedValue = queue.Dequeue()
End If
queueSum += currentValue
queueSum -= removedValue
queue.Enqueue(currentValue)
If queue.Count < queueLength Then
Return Nothing
ElseIf queue.Count = queueLength And queueFull = False Then
queueFull = True
Return queueSum / queueLength
Else
Return (queueSum) / queueLength
End If
End If
End Function
public function ClearQueue()
Dim i as Integer
Dim n as Integer = Queue.Count-1
for i=n To 0 Step-1
queue.Dequeue()
next i
End function
Add one more row inside of group, call the function defined in custom code.
Save and preview. It looks like below:
Reference:
Moving or rolling average, how to?
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera) -
I currently use a code heavy solution thats clunky and need to refine the graphing part. For simplicity I want to use the waveform chart and its "Stack Plots" option. However I cannot see how to collect 2 or 3 data streams and display them on 1 of the stacked plots.
The final verson will have 3 stacked plots, the top plots needs 3 data streams, The middle & bottom plots require 2 data streams.
Help AppreciatedHi,
Sometimes the Synchronous Display option makes a difference (right
mouse>advanced>Synchronous Display). Or while running, right click>Smooth
Updates. Fiddle around with them, sometimes unexpected settings has the best
performance (only four combinations anyway).
Regards,
Wiebe.
"CB" wrote in message
news:50650000000500000005810100-1079395200000@exchange.ni.com...
> Dennis,
> Thanks for that, I had tried your solution earlier while developing
> the package. A bit dissapointing the stacked plots wont work. it'd
> save lots of code and simplify the whole graphing part of my package.
> I am reluctant to overlay transparent graphs etc on top of others
> because I am aware it could hinder performance, I am doing a lot in my
> pac
kage and need to get the most out of the machine. My current
> solution is nearly ok and consists of 3 waveform charts contained in a
> cluster. I need the 3 charts to line up accurately and be of identical
> size which involved plugging into the various sizing/xy line up params
> which was a bit fiddly. The main problem is the bottom graph seems to
> end up lagging at some point which gives doesnt look too good. When
> the PC gets loaded up with too much work its best effort means the
> bottom graph get missed out (or something like that) occasionally. I
> have noticed this on all the machines it has run on even my new 3Ghz
> machine.
> I am sure this could work ok but I cannot figure how to force the
> graphs to only continue once all 3 have their data.
> Thanks in advance, Regards, Chris -
2008 macbook won't take more than 3gb ram
So I bought some ddr2 ram for my MacBook and when I installed it the computer black screened with no chime. So I tested each stick with the same result I even reset the SMC memory to see if that fixed it and nothing. However when I installed just one of the 2GB sticks with one of the 1GB sticks it already had, the computer boot fine and when I checked the system profiler it noticed the ram perfectly fine.
Some models of MacBook required a firmware update; and of those
(unknown percentage of models or their specifics) some could only
see a greater upgrade in RAM or to use a later OS X, once done.
Perhaps the RAM you are trying to use is not correct spec to the Mac.
Or maybe one of the chips has an issue whereby it doesn't connect,
so a clean pencil eraser could be carefully used to wipe fingerprints or
dust off the connectors. And never handle RAM by those contacts.
Several early MacBooks had a ceiling of 3GB, though two 2-GB
chips could be installed if that is what you happen to get; but that
did not necessarily equate to a noticeable improvement in function.
However the Early 2008 MacBook 13-inch model is said to support
up to 6GB RAM: one 2-GB chip & one 4-GB chip; of correct spec.
Both the Early 2008 and Late 2008 (white/black) models can use:
Maximum Memory 6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
according to http://mactracker.ca specification database
Also, if the MacBook is of the Aluminum unibody version, that uses
a different specification of RAM, and also has higher ceiling total...
{If the RAM is from some 'poor quality' source, there is a fair chance
it is not good or stable in the Mac. There is a noticeable difference.}
So that may be the problem... hard to say without more information.
Good luck & happy computing! -
More than one column retrieved in "report and form" page
HELLO!
let's see if anybody can help me with this... i'm sure it's a stupid problem but i really don't know how to solve it.
when i create a new application with APEX, i want to add a "report and form" page. i select the table where de data is, and then click on add page. then i go to the page definition for the form that just has been created but there's no option for selecting more than one column as the link column...
i mean, i want to show a report with all the columns from the table and then, by selecting one of them, the form should display that column but the problem is that the primary key of the table is formed by 6 columns and i always receive the "more than one column retrieved" message as it's trying to retrieve the information using only one column. is there any way to make the link column be composed by 6 or 7 columns??APEX can handle 2 primary key for one table (if you are using the automated fetch row and the automated process row).
In your case, you'll have to create your own "fetch process (page rendering)" and "DML process (page processing)".
Flex
Homepage : http://www.insum.ca
InSum Solutions' blog : http://insum-apex.blogspot.com -
How to calculate difference and percentage in matrix report dynamic columns in SSRS 2008
Hi Friends,
I need to calculate Difference and Percentage In matrix report SSRS 2008
1) Row grouping based On Product
2) Column Grouping Week and Fiscal Year Current week and Previous Year same Weeks
3)Data Invnetory(Value fileld)
Example:
If value1 and Value2 Available we need to calculate Percentage and Difference.Otherwise Not required NA I need to Show.
For example If Particular week,Current year data is available,Previous year week data is not available No
need to cal Diff and Percentage we need to show Empty.
Below Code is working for If two values is available.
If any one of the fiscal year week data is not there it's taking some garbage values.
I tries with If condition in GetPCT() and GetDiff() It's not working.
Can some one please help me on this.
I am using the custom code
Public Shared Value1 as String
Public Shared Value2 as String
Public Shared previous as string
Public Shared previousweek as string
Public Shared Function GetValue(Value as String,partner as String,Week as String) as String
If partner =previous and Week =previousweek Then
Value2=Value
Else
previous=partner
previousweek=Week
Value1=Value
End If
return Value
End Function
Public Shared Function GetDiff()
return Value2-Value1
End Function
Public Shared Function GetPct()
return (Value2-Value1)/Value1
End Function
How to handle this.
Thank You, Manasa.VHi veerapaneni,
According to your description, if one of the fiscal year week doesn’t have data, the custom code returns false results.
For your requirement, if NULL value exists in the database, we should replace it as zero then perform calculate. So within the code, we should judge whether the value is NULL. To achieve your goal, please refer to the steps below:
1. Create a table like below.
create table dif4
([Product Group] varchar(50),
[Week] varchar(50),
[Fiscalyearweek] varchar(50),
value int
insert into dif4 values
('Desktops','W01','FY14W01',0),
('Desktops','W01','FY15W01',45),
('Desktops','W02','FY14W02',null),
('Desktops','W02','FY15W02',30),
('Desktops','W03','FY14W03',12),
('Desktops','W03','FY15W03',50),
('Notebooks','W01','FY14W01',35),
('Notebooks','W01','FY15W01',56),
('Notebooks','W02','FY14W02',45),
('Notebooks','W02','FY15W02',87),
('Notebooks','W03','FY14W03',75),
('Notebooks','W03','FY15W03',105),
('Tablets','W01','FY14W01',34),
('Tablets','W01','FY15W01',46),
('Tablets','W02','FY14W02',49),
('Tablets','W02','FY15W02',96),
('Tablets','W03','FY14W03',42),
('Tablets','W03','FY15W03',113)
2. Add the custom code in the Report Properties.
Public Shared Value1 as Integer
Public Shared Value2 as Integer
Public Shared previous as string
Public Shared previousweek as string
Public Shared Function GetValue(Value as Integer,product as String,Week as String) as Integer
If Value=Nothing Then
Value=0
End If
If product =previous and Week =previousweek Then
Value2=Value
Else
previous=product
previousweek=Week
Value1=Value
End If
return Value
End Function
Public Shared Function GetPct()
If Value1=0 Then
return 0
Else
return (Value2-Value1)/Value1
End If
End Function
Public Shared Function GetDiff()
return Value2-Value1
End Function
3. Design the matrix like below.
4. Then get the expected results.<o:p></o:p>
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Hi,
I am using SSRS 2008 R2.
I have two TABLIX in a report. One is TABLIX with row/clumn grouping. 2nd one is flat view.
Here each tablix is dispaly it's data on single page for each.
My Requirement on First TABLIX is:
1. I have to make column headers visible on scrolling down
2. Export to PDF - column headers must be visible on all the pdf pages for same tablix data.
But ... either one is achieved at my end.
so ... any suggestions please to achieve both at same time.
thank you in advance.
best regards,
venkat.Hi G.V.Naidu,
According to your description, the first tablix is matrix to use display data.
In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
1. Right click tablix, and select Tablix Properties.
2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
SSRS 2008, have this report
Qty Column --------- Est cost column ----- Mark up Cost Column - Did add Total cost column
4 pcs- $ 2000.00 --------------$ 50.00 --------------- $ 2050.00
Avg Cost
$2050/4= 512.50
how to write this exp to get value $ 512.50
what I did , its not giving me correct result,
=Sum(Fields!estCOSTAMOUNT.Value+Fields!COSTMARKUP.Value)/(Fields!QTY.Value)
can some one please advise what I am doing wrong.
thanks in advanceI tried both exp, did not work
may be I was not clear in the question
Qty Column --------- Est cost column ----- Mark up Cost Column - Did add Total cost column
4 pcs- $ 2000.00 --------------$ 50.00 --------------- $ 2050.00
2 pcs ------------------$ 1500.00 --------------=$100.00 ----------------$1600.00
Total qty 6 pcs-----$ 3500.00------------------$150.00---------------$ 3650.00
Avg Cost
$3650..00/6= 608.33
my field name
=Sum(Fields!COSTAMOUNT.Value) + want to add cost amount and Mark up and divide with qty total
=Sum(Fields!COSTMARKUP.Value)
=Sum(Fields!QTY.Value)
please help how can I write it to get the result -
How to Update the oracle toad column value in table by using SSRS 2008
Hi Team,
How to update the oracle DB table column value by using SSRS 2008.
Can any one help me on this.
Thanks,
Manasa.
Thank You, Manasa.VHi veerapaneni,
According to your description, you want to use SSRS to update data in database table. Right?
Though Reporting Services is mostly used for rendering data, your requirement is still can be achieved technically. You need to create a really complicated stored procedure. Pass insert/delete/update and the columns we need to insert/delete/update as
parameters into the stored procedure. When we click "View Report", the stored procedure will execute so that we can execute insert/delete/update inside of the stored procedure. Please take a reference to two related articles below:
Update Tables with Reporting Services – T-SQL Tuesday #005
SQL Server: Using SQL Server Reporting Services to Manage Data
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
SSRS 2008 Header height issues due to merged columns
When working on a report today we ran into an issue which took us quite some testing to figure out. At some point we decided to switch some of the headers of columns around and when rendering the report again it for some reason created a header which was
way heigher then the biggest text there, showing a huge empty space in the header underneath the text.
My first guess was that there had to be some extra spaces in some column or something alike, which made the cells grow so much. This however was not the case. As a next step I cleared the cells in the headerrow one by one to figure out which field was making
the header grow this much. It turned out to be the header in the 10th column. When I replaced the text in this cell, it did not make the header grow anymore. When I put the original text back, it started growing again. As a next step I removed the text in
this cell, pasted it in another cell (column 11) and rendered the report, with the same huge header again. Out of frustration I tried a desperate last move, copied it to column 1 and rendered the report, the effect was a small header without some weird height.
So the conclusion was that this text was making the header grow hugely in the columns 10 and 11, but not in column 1? What is the difference between column 10/11 and column 1?
Then I noticed that column 7, 8 and 9 were pretty small columns, only holding integer values. The header above this, however, was one word, so the 3 cells in the header for these columns were MERGED. So basicly, only looking at the cells in the header, my
huge text was in the 8th cell from the left, not the 10th (10th column, but due to merging the 8th cell). As a test I editted the width of the 8th column (the middle one of the merged cells) to be as wide as all the other columns holding text. The rendering
of the report, with the huge text in the original headercolumn, now did not grow my header to be extremely big. This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells
up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that there is a bug in SSRS 2008 considering cell widths and merged cells? It is like the 10th column header now thinks it is part of the 8th column (being
the 8th cell in its row due to merging) and therefor works with the width of this 8th column to judge how much increased height it needs. In fact it is the width of the 10th column and therefor doesnt need the height it creates, resulting in a huge empty space
underneath the text.
Is this a known issue by Microsoft? Any ETA on this for a fix?This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that
there is a bug in SSRS 2008 considering cell widths and merged cells?
Hi Joel_i,
I was a little confused with the paragraph above. Could you please elaborate it?
Based on the information posted, I tried to reproduce the scenario, but it works fine. During my test, the header cells grow
only when the text in the head column is too long which will caused newline, or there is some extra space in some columns. So, you might need to check the properties of the 8<sup>th</sup> column cell, such asSpaceAfer,
SpaceBefore, to make sure all properties are set rightly.
To provide you further assistance, could you please post the report and dataset with sample data to our data collection E-mail
address?
E-mail: sqltnsp AT microsoft.com (Please replace the AT with @, and remove additional spaces).
Thanks,
Lola Wang
Please remember to mark the replies as answers if they help. -
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Hello Everyone,
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Regards
Gautam S
RegardsHi,
Assuming you have test data like this ;
select 'abc'as [GROUP],'NN' name , 1 id
union all
select 'abc' as [GROUP] ,'PP' name , 1 id
union all
select 'abc'as [GROUP],'RR' name , 2 id
Step1 : take Tablix with row group as your group Name .
Step2 : right Click on Row Group Details -> Delete-> Delete Group Only
Step3 : In Count Cell use below expression ;
=CountDistinct(Fields!id.Value)
Follow this link;
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b6b45917-0a26-4d15-be46-2c6a2697d6e9/distinct-rows-sum?forum=sqlreportingservices#5ffdee06-c2c8-44ea-a3a5-b958488bb6b5
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com -
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
DanI was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML. -
LookUpSet is Not working for multiple columns in SSRS 2008 R2
Hi Friends,
I have a problem when i use more than one LookUpSet in SSRS to display more than one value based on Day Number & other fields..Please find the below details and please suggest me a solution for this.
Crystal :
Day1 Day2
Period 4 Arts,Maths Arts,Maths
For this in SSRS i am using LookUpSet as below based on StaffID,PeriodNumber & DayNumber like this:
= (IIF(Fields!DayNumber.Value=1,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
which is displaying correct in SSRS,But when i use the same expression to display Day 2 classes it is returning empty even though i have values on Day 2.Please have a look at the SSRS output below:
Day1 Day2
Period 4 Arts,Maths
Day 2 Expression is :
= (IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
I am not sure why it is not liking to use more than LookUpSet in the same report,Please suggest me with a work around for this.
Thanks in advance,
Sam.Hi Guys,
I have sorted out the problem.Solution for the above problem is use Max before the expression like below, since it has multiple days and periods in the Dataset.
= Max((IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & ields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," + vbcrlf),"")))
Thanks,
Sam
Maybe you are looking for
-
FCP 5.0 crash when trying to capture HDV. Happens since running w LEOPARD
I migrated FCS from a G5 1.8 GHz powerPC to a Mac Pro Intel 2.66 GHz. Also I upgraded to Leopard. Now when I set FCP to capture HDV, it quits unexpectedly when I try launch the log and capture tool. The same thing is happening with FCP in the G5, how
-
I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?
-
Hi , This is regarding Actual cost calculation. I have three material X - RAW MATERIAL, Y-SEMIFINISH MATERIAL, Z-FINISH MATERIAL. X=Stand. price Rs.10 Processing cost Rs.10 Y= Stand. price Rs.25 Processing cost Rs.10 When i produce Y , Cost will be =
-
HI , I want to change the masthead inside the portal , can anyone help me doing that .I have found the par file and imported that into the NWDS.Please tel me how to change the Links in the masthead. Cheers Sara
-
[AS][CS2] Working with a number of specified frames
b Hi all, I'm using script labels to target specific text frames to work with (eg. Cap01, Cap03, Cap05). I'd like to specify the set of text frames I want to work with in one line, like: b set myCaps to text frame "Cap01" & text frame "Cap03" & text