[SOLVED] No prompt after update to 3.3.6-1-ARCH
After doing an upgrade and a reboot (fail save, the otherone doesn't work) my arch stopped working (booting)
Linux janus 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64 GNU/Linux
/boot/grub/menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
HARDWARECLOCK=""
TIMEZONE=""
KEYMAP="de_CH-latin1"
CONSOLEFONT="Lat2-Terminus16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="yes"
# NETWORKING
HOSTNAME="janus"
interface=eth0
address=172.16.0.8
netmask=255.255.0.0
gateway=172.16.0.1
NETWORK_PERSIST="yes"
# DAEMONS
#DAEMONS=( syslog-ng crond network nfs-common dnsmasq sshd ntpd @httpd !netfs @samba @nfs-server @munin-node @minidlna @logitechmediaserver @transmissiond @randomsound )
DAEMONS=( syslog-ng crond network dnsmasq sshd )
dmesg
[ 0.907376] msgmni has been set to 3989
[ 0.908073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.908205] io scheduler noop registered
[ 0.908216] io scheduler deadline registered
[ 0.908403] io scheduler cfq registered (default)
[ 0.908722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.908919] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.909085] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.909487] intel_idle: MWAIT substates: 0x10
[ 0.909523] intel_idle: v0.4 model 0x1C
[ 0.909530] intel_idle: lapic_timer_reliable_states 0x2
[ 0.909674] GHES: HEST is not enabled!
[ 0.909882] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.911088] Linux agpgart interface v0.103
[ 0.911316] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.914487] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.914596] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.915020] mousedev: PS/2 mouse device common for all mice
[ 0.915192] rtc_cmos 00:03: RTC can wake from S4
[ 0.915505] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.915549] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.915691] cpuidle: using governor ladder
[ 0.915842] cpuidle: using governor menu
[ 0.916378] TCP cubic registered
[ 0.916798] NET: Registered protocol family 10
[ 0.918019] NET: Registered protocol family 17
[ 0.918035] Registering the dns_resolver key type
[ 0.918552] PM: Hibernation image not present or could not be loaded.
[ 0.918576] registered taskstats version 1
[ 0.919485] rtc_cmos 00:03: setting system clock to 2012-05-22 20:49:54 UTC (1337719794)
[ 0.919617] Initializing network drop monitor service
[ 0.923155] Freeing unused kernel memory: 732k freed
[ 0.923689] Write protecting the kernel read-only data: 8192k
[ 0.937719] Freeing unused kernel memory: 1632k freed
[ 0.944939] Freeing unused kernel memory: 656k freed
[ 0.972274] udevd[47]: starting version 182
[ 1.081877] SCSI subsystem initialized
[ 1.087149] libata version 3.00 loaded.
[ 1.090150] ata_piix 0000:00:1f.1: version 2.13
[ 1.090166] sata_promise 0000:04:00.0: version 2.12
[ 1.090320] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.096448] scsi0 : sata_promise
[ 1.098921] scsi1 : sata_promise
[ 1.101399] scsi2 : sata_promise
[ 1.101689] scsi3 : ata_piix
[ 1.101855] scsi4 : sata_promise
[ 1.102566] ata3: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120380 irq 21
[ 1.102582] ata4: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120280 irq 21
[ 1.102594] ata5: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120200 irq 21
[ 1.102608] ata6: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120300 irq 21
[ 1.103448] scsi5 : ata_piix
[ 1.105045] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
[ 1.105061] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
[ 1.105184] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.105857] ata2: port disabled--ignoring
[ 1.256766] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.257277] ata1.00: ATAPI: DVDRW IDE 16X, VER A187, max UDMA/66
[ 1.258236] scsi6 : ata_piix
[ 1.258557] scsi7 : ata_piix
[ 1.259078] ata7: SATA max UDMA/133 cmd 0x30c8 ctl 0x30ec bmdma 0x30a0 irq 19
[ 1.259088] ata8: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e8 bmdma 0x30a8 irq 19
[ 1.263788] ata1.00: configured for UDMA/66
[ 1.426964] ata8.00: ATA-7: SAMSUNG MMCRE64G5MXP-0VB, VBM1801Q, max UDMA/100
[ 1.426973] ata8.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.433610] ata8.00: configured for UDMA/100
[ 1.573416] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.590528] ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 1.590536] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.597178] ata3.00: configured for UDMA/133
[ 1.597532] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 2.070084] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.080650] ata4.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 2.080660] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.087660] ata4.00: configured for UDMA/133
[ 2.088031] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 2.560084] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.580228] ata5.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 2.580238] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.587208] ata5.00: configured for UDMA/133
[ 2.587512] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.060083] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.073646] ata6.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.073655] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.080536] ata6.00: configured for UDMA/133
[ 3.080840] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.081826] scsi 3:0:0:0: CD-ROM DVDRW IDE 16X A187 PQ: 0 ANSI: 5
[ 3.082680] scsi 7:0:0:0: Direct-Access ATA SAMSUNG MMCRE64G VBM1 PQ: 0 ANSI: 5
[ 3.118717] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.118994] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.119057] sd 0:0:0:0: [sda] Write Protect is off
[ 3.119069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.119083] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.119315] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.119341] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.119365] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.119402] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.119415] sd 7:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 3.119440] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.119506] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.119590] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.119688] sd 4:0:0:0: [sdd] Write Protect is off
[ 3.119701] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.119745] sd 7:0:0:0: [sde] Write Protect is off
[ 3.119755] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.119838] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.119861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.119886] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.125924] sde: sde1 sde2 sde3 sde4
[ 3.128350] sda: unknown partition table
[ 3.131954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.133210] sd 7:0:0:0: [sde] Attached SCSI disk
[ 3.134133] sdc: unknown partition table
[ 3.135456] sdd: unknown partition table
[ 3.135487] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.136456] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 3.138525] sdb: unknown partition table
[ 3.139382] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.143991] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 3.144009] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.145875] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.283989] device-mapper: uevent: version 1.0.3
[ 3.284363] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 3.360761] EXT4-fs (sde3): INFO: recovery required on readonly filesystem
[ 3.360771] EXT4-fs (sde3): write access will be enabled during recovery
[ 3.703310] EXT4-fs (sde3): recovery complete
[ 3.703711] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.872439] udevd[356]: starting version 182
[ 5.987333] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 5.987361] ACPI: Sleep Button [SLPB]
[ 5.987585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.987600] ACPI: Power Button [PWRF]
[ 6.015516] FDC 0 is a post-1991 82077
[ 6.039298] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 6.039565] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 6.039806] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 6.045341] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.045543] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 6.047332] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xffffc90000350000, 00:27:0e:08:17:26, XID 1c4000c0 IRQ 43
[ 6.047347] r8169 0000:01:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.047517] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x80000000
[ 6.064277] usbcore: registered new interface driver usbfs
[ 6.064399] usbcore: registered new interface driver hub
[ 6.074606] usbcore: registered new device driver usb
[ 6.093710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.093975] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.093990] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.094157] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.094233] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 6.094258] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.096239] intel_rng: Firmware space is locked read-only. If you can't or
[ 6.096246] intel_rng: don't want to disable this in firmware setup, and if
[ 6.096250] intel_rng: you are certain that your system has a functional
[ 6.096254] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 6.098182] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 6.098251] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x883a4000
[ 6.106891] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.108800] hub 1-0:1.0: USB hub found
[ 6.108829] hub 1-0:1.0: 8 ports detected
[ 6.114693] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.114930] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.114943] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.115013] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.115073] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 6.116010] md: bind<sdb>
[ 6.116313] leds_ss4200: no LED devices found
[ 6.121149] [drm] Initialized drm 1.1.0 20060810
[ 6.129071] hub 2-0:1.0: USB hub found
[ 6.129105] hub 2-0:1.0: 2 ports detected
[ 6.129668] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.129682] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.129728] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 6.129801] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 6.130542] hub 3-0:1.0: USB hub found
[ 6.130566] hub 3-0:1.0: 2 ports detected
[ 6.130984] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.130998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.131046] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 6.131152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 6.135543] hub 4-0:1.0: USB hub found
[ 6.135576] hub 4-0:1.0: 2 ports detected
[ 6.138604] md: bind<sda>
[ 6.141980] iTCO_vendor_support: vendor-support=0
[ 6.143676] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 6.143688] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.143728] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 6.143799] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 6.144926] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.145255] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 6.145488] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.146421] hub 5-0:1.0: USB hub found
[ 6.146443] hub 5-0:1.0: 2 ports detected
[ 6.147012] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.179903] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.183546] md: bind<sdc>
[ 6.197452] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
[ 6.215986] md: bind<sdd>
[ 6.234886] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 6.237154] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 6.242659] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.247410] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.247627] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.252088] i915 0000:00:02.0: setting latency timer to 64
[ 6.296941] raid6: int64x1 269 MB/s
[ 6.354237] raid6: int64x2 416 MB/s
[ 6.357354] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.357365] [drm] Driver supports precise vblank timestamp query.
[ 6.357537] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.410098] raid6: int64x4 430 MB/s
[ 6.466761] raid6: int64x8 472 MB/s
[ 6.523430] raid6: sse2x1 596 MB/s
[ 6.580084] raid6: sse2x2 1096 MB/s
[ 6.586778] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 6.636699] raid6: sse2x4 1543 MB/s
[ 6.636707] raid6: using algorithm sse2x4 (1543 MB/s)
[ 6.638081] async_tx: api initialized (async)
[ 6.639298] xor: automatically using best checksumming function: generic_sse
[ 6.653360] generic_sse: 4777.200 MB/sec
[ 6.653369] xor: using function: generic_sse (4777.200 MB/sec)
[ 6.662829] md: raid6 personality registered for level 6
[ 6.662838] md: raid5 personality registered for level 5
[ 6.662843] md: raid4 personality registered for level 4
[ 6.663610] bio: create slab <bio-1> at 1
[ 6.663631] md/raid:md127: not clean -- starting background reconstruction
[ 6.663682] md/raid:md127: device sdd operational as raid disk 3
[ 6.663692] md/raid:md127: device sdc operational as raid disk 2
[ 6.663701] md/raid:md127: device sda operational as raid disk 0
[ 6.663709] md/raid:md127: device sdb operational as raid disk 1
[ 6.664617] md/raid:md127: allocated 4300kB
[ 6.664832] md/raid:md127: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 6.664839] RAID conf printout:
[ 6.664843] --- level:5 rd:4 wd:4
[ 6.664849] disk 0, o:1, dev:sda
[ 6.664854] disk 1, o:1, dev:sdb
[ 6.664858] disk 2, o:1, dev:sdc
[ 6.664863] disk 3, o:1, dev:sdd
[ 6.664967] md127: detected capacity change from 0 to 3000614387712
[ 6.669170] md127: unknown partition table
[ 6.797420] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
[ 6.797905] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input0
[ 6.821245] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input10
[ 6.821839] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input1
[ 6.821926] usbcore: registered new interface driver usbhid
[ 6.821934] usbhid: USB HID core driver
[ 7.139480] [drm] initialized overlay support
[ 7.359988] fbcon: inteldrmfb (fb0) is primary device
[ 7.444647] Console: switching to colour frame buffer device 210x65
[ 7.464949] fb0: inteldrmfb frame buffer device
[ 7.464954] drm: registered panic notifier
[ 7.465069] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.257757] EXT4-fs (sde3): re-mounted. Opts: discard
[ 8.331371] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: discard
[ 8.359096] EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: discard
[ 9.337971] r8169 0000:01:00.0: eth0: link down
[ 9.337993] r8169 0000:01:00.0: eth0: link down
[ 9.338818] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.264950] r8169 0000:01:00.0: eth0: link up
[ 11.265995] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.936743] eth0: no IPv6 routers present
this machine has run for five years now. but here I'm stuck. The last message is from the SSHd being started. I can logon to it on a SSH but the machine itself won't start a shell..
what's up?
Last edited by theking2 (2012-05-23 09:36:02)
@Gcool: no nothing happens it is the last line on the console. As it is normally a headless I don't have X11 active.
I not always scrutinize the packets that are updated and do a pacman -Syu on a monthly basis.
It boots to runlevel 3 which it does but than is stuck when the last daemon (successfully) loads
It is a file server and I do use md and lvm2 though. My guess is that for some reason the system wasn't shutdown correctly causing the RAID5 to become instable and being resyncd as we speak. But I'm happy to already have the sshd working and could start repairs.
the last bit of pacman.log:
[2012-05-17 13:57] ==> Image generation successful
[2012-05-17 13:57] upgraded linux (3.3.4-2 -> 3.3.6-1)
[2012-05-17 13:57] upgraded linux-headers (3.3.4-2 -> 3.3.6-1)
[2012-05-17 13:57] upgraded man-pages (3.39-1 -> 3.41-1)
[2012-05-17 13:57] upgraded sqlite (3.7.11-2 -> 3.7.12-1)
[2012-05-17 13:57] upgraded minidlna (1.0.24-3 -> 1.0.24-4)
[2012-05-17 13:57] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-17 13:57] upgraded mpg123 (1.14.0-1 -> 1.14.2-1)
[2012-05-17 13:57] upgraded perl-log-log4perl (1.35-1 -> 1.36-1)
[2012-05-17 13:57] upgraded munin-node (1.4.6-2 -> 1.4.7-1)
[2012-05-17 13:57] upgraded munin (1.4.6-2 -> 1.4.7-1)
[2012-05-17 13:57] upgraded ntfs-3g (2012.1.15-2 -> 2012.1.15-3)
[2012-05-17 13:58] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-17 13:58] upgraded php (5.3.12-1 -> 5.4.3-1)
[2012-05-17 13:58] upgraded php-apache (5.3.12-1 -> 5.4.3-1)
[2012-05-17 13:58] upgraded powertop (1.13-3 -> 2.0-1)
[2012-05-17 13:58] upgraded vim-runtime (7.3.495-3 -> 7.3.515-1)
[2012-05-17 13:58] upgraded vim (7.3.495-3 -> 7.3.515-1)
[2012-05-17 13:58] upgraded xterm (278-1 -> 279-1)
[2012-05-17 15:06] Running 'pacman -S upower'
[2012-05-17 15:06] installed polkit (0.105-1)
[2012-05-17 15:06] installed pm-quirks (0.20100619-2)
[2012-05-17 15:06] installed pm-utils (1.4.1-4)
[2012-05-17 15:06] installed dbus-glib (0.98-1)
[2012-05-17 15:06] installed usbmuxd (1.0.7-3)
[2012-05-17 15:06] installed libplist (1.8-2)
[2012-05-17 15:06] installed libimobiledevice (1.1.1-3)
[2012-05-17 15:06] installed upower (0.9.16-1)
[2012-05-17 16:11] Running 'pacman -S --asdeps perl-config-general libxslt'
[2012-05-17 16:12] Running 'pacman -U /home/j/dev/tgt/perl_conig_general/perl-config-general/perl-config-general-2.50-2-x86_64.pkg.tar.xz'
[2012-05-17 16:12] installed perl-config-general (2.50-2)
[2012-05-17 16:12] Running 'pacman -S --asdeps libxslt'
[2012-05-17 16:12] installed libxslt (1.1.26-3)
[2012-05-17 16:21] Running 'pacman -U /home/j/dev/tgt/tgt/tgt-1.0.26-2-x86_64.pkg.tar.xz'
[2012-05-17 16:22] installed tgt (1.0.26-2)
[2012-05-17 16:38] Running 'pacman -S sg_inq'
[2012-05-17 16:49] Running 'pacman -R iscsi-tgt'
[2012-05-17 16:49] Running 'pacman -R tgt'
[2012-05-17 16:49] warning: /etc/tgt/targets.conf saved as /etc/tgt/targets.conf.pacsave
[2012-05-17 16:49] removed tgt (1.0.26-2)
[2012-05-17 16:50] Running 'pacman -R perl-config-general libxslt'
[2012-05-17 16:50] removed libxslt (1.1.26-3)
[2012-05-17 16:50] removed perl-config-general (2.50-2)
[2012-05-22 23:26] Running 'pacman -Syu'
[2012-05-22 23:26] synchronizing package lists
[2012-05-22 23:26] starting full system upgrade
[2012-05-22 23:29] upgraded libcups (1.5.2-2 -> 1.5.3-1)
[2012-05-22 23:29] upgraded libglapi (8.0.2-1 -> 8.0.3-1)
[2012-05-22 23:29] upgraded libgl (8.0.2-1 -> 8.0.3-1)
[2012-05-22 23:29] upgraded libnl (3.2.7-1 -> 3.2.9-1)
[2012-05-22 23:29] upgraded mdadm (3.2.3-3 -> 3.2.4-1)
[2012-05-22 23:29] upgraded sqlite (3.7.12-1 -> 3.7.12-2)
[2012-05-22 23:30] upgraded subversion (1.7.4-3 -> 1.7.5-1)
[2012-05-22 23:30] upgraded sudo (1.8.4.p4-1 -> 1.8.5.p1-1)
Similar Messages
-
Macbook Pro boots to Darwin prompt after update
I updated my Macbook Pro using Auto Update this morning, and now I can only boot to a Darwin prompt. The computer would boot, go to the starting OS X screen, then straight to the prompt. If I exited the prompt, I would be taken to a user login screen (which would revert back to the prompt after an attempted login)
I checked the system log and it showed that SecurityAgent was crashing.
So, per the advice in this post:
http://discussions.apple.com/message.jspa?messageID=1545778#1545778
I renamed the NetInfo Database, and reran the initial setup using the proper account short name.
However, now the computer goes to the gray timer circle before straight to the prompt, no Starting OS X screen.
The system log now shows the following:
loginwindow[66]: Login Window Started Security Agent
loginwindow[66]: AuthorizationRef doesn't have a username (<LoginAuthRefMgr: 0x336150>).\n
launchd: onoption repeating too quickly on port /dev/console, sleeping
I thought flushing the NetInfo Database would help, but apparently not.
I would appreciate any help, and thanks!I am having the exact same issue!!!! The problem started as soon as I updated to 10.5.4. I sent my computer off to Apple's Depot to be fixed. The 6 day turn around really slowed me down. After my MacBook Pro was returned I had a note from Service that my Logic Board was replaced and my 3rd Party RAM was not 'Apple Friendly.' The RAM is fine and in Perfect Working Condition. I am assuming that after the Apple Techs got to my RAM they did not proceed to replace my Graphics Card or the Inverter Board (the small cable that sends power to the monitor). I took my MacBook Pro out of the box, re-inserted my 3rd-Party RAM and the computer worked fine for 3 weeks. That's until Last Night I had a FireWire Drive Mounting issue and had to Hard Re-Start my system it was then that the Black Screen Issue started again. Again, your notes are EXACTLY the same issue I am now having! I have called Apple Support and they will now take my computer to service with 'White Glove Treatment.'
After reading your post I am convinced that this is a software Bug. Apple please update. As of now I cannot even startup my computer to check for updates! Also, I cannot afford to be without my system for another week!! -
[Solved] Dwm reconfigure after update.
The problem is simple, after update to last version of Dwm i had to build and install it from scratch. I don't want to do that for any new version of Dwm. Is there a way to avoid that process?
Cheers.
Last edited by n0dix (2010-06-04 13:40:46)skanky wrote:
I had this issue on my other machine (this one uses scrotwm). Trying to remember what I did to resolve it.
There were no errors after makepkg -efi but the version kept reverting back to the previous one. I think it happened updating to that one, too. Anyway, I *think* what I did was to copy my config.h elsewhere, clear out the dir I used for building it, updated abs, copied the dwm-5.8.1 files in and rebuilt. Search for dwm-5.8.1 using grep to make sure you have the right files.
There may be a step missing from that though.
Exactly the same problem and the solution helps a lot. Indeed, this is the way i solved the issue. But the question is: exists any way to do automatically those steps? I know, i can make a shell script, but apart from that there is another? -
[SOLVED]libtdb error after updating
i got a serious problem after updating like this:
$mplayer
mplayer: error while loading shared libraries: libtdb.so.1: cannot open shared object file: No such file or directory
maybe something about libtdb & libcanberra goes wrong...
can anybody solve the issue?
Last edited by shiningmoon (2009-02-22 11:43:19)Maskawanian wrote:
I have this same error as well. shiningmoon would you be able to tell us how you fixed this?
Work around (downgrade):
pacman -U '/var/cache/pacman/pkg/smbclient-3.2.7-1-x86_64.pkg.tar.gz' '/var/cache/pacman/pkg/tdb-3.2.7-1-x86_64.pkg.tar.gz'
I assume you have x86_64, if not modify accordingly.
Works tnx:) -
[solved] dhcp-problems after updating package networkmanager 0.9.4.0-6
Hi,
I have some problems to get an ip address with dhcp on the device eth0. On wlan0 I get a ip address with dhcp depending on the network.
Anyone with the same problem after the update from version 5 to version 6?
After downgrading to version 5 everything works fine...
Thank you!
EDIT:
Don't know what it was, today after updating only networkmanager everything works fine.
Last edited by yannsen (2012-06-19 08:23:52)Hi,
I have some problems to get an ip address with dhcp on the device eth0. On wlan0 I get a ip address with dhcp depending on the network.
Anyone with the same problem after the update from version 5 to version 6?
After downgrading to version 5 everything works fine...
Thank you!
EDIT:
Don't know what it was, today after updating only networkmanager everything works fine.
Last edited by yannsen (2012-06-19 08:23:52) -
[Solved] Boot problem after update
After updating my Archlinux (64bit) installation and rebooting it a few minutes ago
I have encountered the following problem. The boot process is hanging after
activation of logical volumes. Here are the boot messages:
Booting the kernel.
:: Staring udevd...
done.
:: Running Hook [udev]
:: Triggering uevents…done.
:: Running Hook [lvm2]
Activating logical volumes…
15 logical volume(s) in volume group "system" now active
I have also tried the fallback kernel. The same problem!
What is going wrong?
Regards
Nik
Last edited by nitralime (2012-04-29 10:41:31)jasonwryan wrote:
I thought I was.
The first clause in the sentence tells you that you can search the boards for the answer; the second provides the high-level solution.
https://bbs.archlinux.org/viewtopic.php?id=140439
Thank you for the link! -
[solved] LXTerminal has no prompt after update
I’m running Arch linux on a Thinkpad T40 laptop with e17 as a desktop environment, but I use LXTerminal as a terminal emulator for now.
Today I start LXTerminal, and it displays a cursor, but no prompt, and I cannot type anything in it. I do know that:
it worked yesterday,
Xterm still works,
LXTerminal works if started as root from xterm (but not as a user),
and I can su to my user account from this root terminal.
The following packages have been upgraded between then and now, but none of them looks very promising to me:
glibc
binutils
curl
firefox
gcc-libs
gcc-fortran
ghostscript
girara-common
girara-gtk2
iputils
linux
logrotate
mupdf
run-parts
syslog-ng
valgrind
vim-runtime
vim
zathura
None of ~/.bashrc, ~/.bash_profile, or /etc/bash.bashrc has changed recently, but i can reproduce them below. /etc/bash.bashrc has my PS1 definition in it. I have been unable to find a config file for lxterminal itself.
Help or advice would be greatly appreciated. Thank you.
# ~/.bashrc
# modified commands:
alias diff='colordiff' #requires colordiff package
alias grep='grep --color=auto'
alias more='less'
alias df='df -h'
alias du='du -c -h'
alias vi='vim'
alias ping='ping -c 3'
alias mkdir='mkdir -pv'
# ls:
alias ls='ls -hF --color=always'
alias ll='ls -l'
alias la='ls -A'
# safety:
alias chown='chown --preserve-root'
alias chmod='chmod --preserve-root'
alias chgrp='chgrp --preserve-root'
alias rm='rm -Iv'
alias ln='ln -i'
alias cp='cp -iv'
alias mv='mv -iv'
# new things:
alias up='cd ..'
alias upp='cd ../..'
alias uppp='cd ../../..'
alias upppp='cd ../../../..'
alias openports='netstat --all --numeric --programs --inet'
alias size='du -hs'
# for colored manpages:
man () \
env \
LESS_TERMCAP_mb=$(printf "\e[1;37m") \
LESS_TERMCAP_md=$(printf "\e[1;37m") \
LESS_TERMCAP_me=$(printf "\e[0m") \
LESS_TERMCAP_se=$(printf "\e[0m") \
LESS_TERMCAP_so=$(printf "\e[1;47;30m") \
LESS_TERMCAP_ue=$(printf "\e[0m") \
LESS_TERMCAP_us=$(printf "\e[0;36m") \
man "$@"
# ignore duplicate and blank entries in history:
export HISTCONTROL=ignoreboth
# tab completion for sudo commands:
complete -cf sudo
# run skype in a sandbox:
alias skype='xhost +SI:localuser:skype && su skype -c skype'
# ~/.bash_profile
[[ -f ~/.bashrc ]] && . ~/.bashrc
# /etc/bash.bashrc
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
PS1='[\u@\h \W]\$ '
PS2='> '
PS3='> '
PS4='+ '
case ${TERM} in
xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
screen)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
esac
[ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion
Last edited by iemcd (2013-08-19 22:13:58)karol wrote:The question is, why did you have dwvpts in your fstab in the first place?
https://bbs.archlinux.org/viewtopic.php … 1#p1313371
Like the thread you linked to says, it's always been there. I do have a pacnew file, but the formatting is the same and it's empty, so evidently I just kept using the one I had.
Thanks though Jason, that does seem to have been the issue. And I'm glad to know I wasn't the only one caught off guard.
I'm marking this solved now, thanks everyone. -
[SOLVED] No boot after update unable to find root device|libmount.so.1
Hi,
after my most recent update, which was the first for a long time, I am getting the following error when trying to boot my system:
mount: /lib/libmount.so.1: version 'MOUNT_2.20' not found (required by mount)
cat: can'topen '/proc/cmdline': No such file or directory
ERROR: Unable to find root device ' '
The same for MOUNT_2.21. This error still persists after chroot manual installs of util-linux and glibc. I tried downgrading util-linux still witout success. Following reply #15 of: https://bbs.archlinux.org/viewtopic.php?pid=1130638 did not solve it either.
I also reinstalled grub just to be on the safe side, but nothing helped.
Please help.
Thanks
Last edited by mark-o-solo (2012-08-02 14:56:36)https://wiki.archlinux.org/index.php/Pa … nger_boot.
If you fucked up the glibc migration (read "The /lib directory becomes a symlink" from the archlinux.org front page), there are countless threads about this, including a big one (350+ replies) in the "Pacman & Package Upgrade Issues" category. I'm sure you will find some answers there. -
Activation prompt after updating CS6 Master Collection
Hi,
I have already activated a copy of the CS6 Master Collection. But I am getting activation prompt everytime I updating any application from the AAM for Adobe CS6 Master collection.
Does anybody knows how to fix this problem?
Any suggestion will be appriciated.
ThanksHey Jack,
I guess you are facing this issue mainly with the 64-bit version products like After Effects, Premiere Pro, Photoshop Extended 64-bit etc.
Unfortuanately, the issue is yet to resolve. So the best solution currently is to save the serial number onto a Notepad/Text Edit and when it asks for a serial number, just copy and paste it and click next. Once it shows activated, it will run as a Full version and not a Trial mode.
Please check this below URL for latest Updates and suggestions on this issue:
http://helpx.adobe.com/creative-suite/kb/64-bit-creative-suite-applications-repeatedly.htm l
Regards,
Jairaj -
[SOLVED] Tomboy error after update
Hello all.
After the last tomboy update, i can't start that application.
The error is:
$ tomboy
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.Logger ---> System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.Services ---> System.TypeLoadException: A type load exception has occurred.
at Tomboy.Services..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Tomboy.FileLogger..ctor () [0x00000] in <filename unknown>:0
at Tomboy.Logger..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Tomboy.Tomboy.Main (System.String[] args) [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.Logger ---> System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.Services ---> System.TypeLoadException: A type load exception has occurred.
at Tomboy.Services..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Tomboy.FileLogger..ctor () [0x00000] in <filename unknown>:0
at Tomboy.Logger..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Tomboy.Tomboy.Main (System.String[] args) [0x00000] in <filename unknown>:0
The version of tomboy is:
pacman -Qi tomboy
Nome : tomboy
Versão : 1.8.3-1
Endereço : http://www.gnome.org/projects/tomboy/
Licenças : GPL
Grupos : gnome-extra
Fornece : Nenhum
Depende de : gtk2 gtkspell gconf gconf-sharp dbus-sharp
dbus-sharp-glib mono-addins hicolor-icon-theme
Dep. Opcionais : Nenhum
Exigido por : Nenhum
Conflitos com : Nenhum
Substitui : Nenhum
Tamanho Instalado : 12892,00 K
Empacotador : Ionut Biru <[email protected]>
Arquitectura : i686
Data da Compilação : Seg 14 Nov 2011 21:14:34 WET
Data da Instalação : Ter 22 Nov 2011 00:19:41 WET
Motivo da instalação : Explicitamente instalado
Script de Instalação : Sim
Descrição : Desktop note-taking application for Linux and
Unix
Someone can help me?
Thanks
Last edited by Andrenas (2012-01-17 14:57:31)Hello all.
I managed to solve the problem with the tomboy.
Apparently when I updated the packages dbus-sharp and dbus-glib-sharp an error occurred. With a
pacman -Sf dbus-sharp-glib dbus-sharp
everything was repaired and now tomboy works.
I discovered this when I tried to compile the tomboy with the abs. The following message appears:
Package file '/usr/lib/pkgconfig/dbus-sharp-glib-1.0.pc' appears to be empty
Package 'dbus-sharp-glib-1.0' has no Name: field
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables DBUS_CFLAGS
and DBUS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
==> ERRO: Uma falha ocorreu em build().
A cancelar...
Greetings.
PS: How can i update post title to [SOLVED]? -
[SOLVED] libpng errors after update
I am getting libpng errors after full update.
Deluge:
[ERROR ] 13:14:41 ui:152 libpng14.so.14: cannot open shared object file: No such file or directory
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/deluge/ui/ui.py", line 133, in __init__
from deluge.ui.gtkui.gtkui import GtkUI
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/__init__.py", line 1, in <module>
from gtkui import start
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/gtkui.py", line 42, in <module>
reactor = gtk2reactor.install()
File "/usr/lib/python2.7/site-packages/twisted/internet/gtk2reactor.py", line 408, in install
reactor = Gtk2Reactor(useGtk)
File "/usr/lib/python2.7/site-packages/twisted/internet/gtk2reactor.py", line 159, in __init__
import gtk
File "/usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py", line 40, in <module>
from gtk import _gtk
ImportError: libpng14.so.14: cannot open shared object file: No such file or directory
[ERROR ] 13:14:41 ui:153 There was an error whilst launching the request UI: gtk
[ERROR ] 13:14:41 ui:154 Look at the traceback above for more information.
Firefox:
XPCOMGlueLoad error for file /usr/lib/firefox/libxpcom.so:
libpng14.so.14: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
I had updated my system several times after the libpng update was announced in archlinux.org and everything was running fine.
Last edited by sa1 (2012-02-13 12:46:59)Ok.
The last problem I got was covered here: https://bbs.archlinux.org/viewtopic.php?id=89043
sudo pacman -S librsvg did the trick. (I don't know why, since it isn't a recompile)
I'm still not 100% sure that all packages have been recompiled for other programs I've not checked to work properly, but I'll mark this as solved.
lddd reported the following:
==> Go out and drink some tea, this will take a while :) ...
-> DIR /usr/local/bin
-> DIR /usr/bin
-> DIR /bin
-> DIR /usr/local/sbin
-> DIR /usr/sbin
-> DIR /sbin
-> DIR /opt/android-sdk/platform-tools
-> DIR /opt/android-sdk/tools
-> DIR /usr/share/java/apache-ant/bin
-> DIR /opt/metasploit
-> DIR /usr/bin/site_perl
-> DIR /usr/bin/vendor_perl
-> DIR /usr/bin/core_perl
-> DIR /lib
-> DIR /usr/lib
-> DIR /usr/local/lib
-> DIR /usr/lib/libfakeroot
-> DIR /usr/lib/gnome-bluetooth
-> DIR /usr/lib32
-> DIR /usr/lib/llvm
-> DIR /usr/lib/octave-3.4.3
find: `/usr/lib/octave-3.4.3': No such file or directory
-> DIR /usr/lib/perl5/core_perl/CORE
-> DIR /usr/lib/xulrunner-10.0
error: No package owns /usr/lib/vmware-installer/2.0/lib/lib/libfontconfig.so.1/libfontconfig.so.1
error: No package owns /usr/lib/vmware-installer/2.0/lib/libconf/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-tiff.so
error: No package owns /usr/lib/vmware-installer/2.0/lib/libconf/lib/gtk-2.0/modules/libatk-bridge.so
error: No package owns /usr/lib/vmware-installer/2.0/sopython/libpy25.so
error: No package owns /usr/lib/vmware-ovftool/ovftool.bin
error: No package owns /usr/lib/vmware-ovftool/libvmodlFactory.so
error: No package owns /usr/lib/vmware-ovftool/libvmacore.so
error: No package owns /usr/lib/vmware-ovftool/libvmodlTypes.so
error: No package owns /usr/lib/vmware-ovftool/libcurl.so.4
error: No package owns /usr/lib/vmware-ovftool/libvmodlImpl.so
error: No package owns /usr/lib/vmware-ovftool/libvmodlStub.so
error: No package owns /usr/lib/vmware-ovftool/libvmomi.so
error: No package owns /usr/lib/vmware-ovftool/libssl.so.0.9.8
error: No package owns /usr/lib/vmware/lib/libamqp.so/libamqp.so
error: No package owns /usr/lib/vmware/lib/libsexymm.so.2/libsexymm.so.2
error: No package owns /usr/lib/vmware/lib/libvmware-app-control.so/libvmware-app-control.so
error: No package owns /usr/lib/vmware/lib/libcds.so/libcds.so
error: No package owns /usr/lib/vmware/lib/libcurl.so.3/libcurl.so.3
error: No package owns /usr/lib/vmware/lib/libgcr.so.0/libgcr.so.0
error: No package owns /usr/lib/vmware/lib/libvmware-fuseUI.so/libvmware-fuseUI.so
error: No package owns /usr/lib/vmware/lib/lib/libvmware-netcfg.so/libvmware-netcfg.so
error: No package owns /usr/lib/vmware/lib/libvmware-modconfig.so/libvmware-modconfig.so
error: No package owns /usr/lib/vmware/lib/libfontconfig.so.1/libfontconfig.so.1
error: No package owns /usr/lib/vmware/lib/libvmwareui.so.0/libvmwareui.so.0
error: No package owns /usr/lib/vmware/lib/libvmware-unity-helper.so/libvmware-unity-helper.so
error: No package owns /usr/lib/vmware/lib/libvmplayer.so/libvmplayer.so
error: No package owns /usr/lib/vmware/lib/libgvmomi.so.0/libgvmomi.so.0
error: No package owns /usr/lib/vmware/lib/libcurl.so.4/libcurl.so.4
error: No package owns /usr/lib/vmware/lib/libvmware-netcfg.so/libvmware-netcfg.so
error: No package owns /usr/lib/vmware/lib/libvmcf.so/libvmcf.so
error: No package owns /usr/lib/vmware/lib/libssl.so.0.9.8/libssl.so.0.9.8
error: No package owns /usr/lib/vmware/libconf/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-tiff.so
error: No package owns /usr/lib/vmware/libconf/lib/gtk-2.0/modules/libatk-bridge.so
==> Files saved to /tmp/lddd-script.BbsU
cat /tmp/lddd-script.BbsU/possible-rebuilds.txt
by avahi
by boost-libs
by darktable
by flac
by ghc
by gimp
by iproute2
by jack
by lib32-alsa-plugins
by libdv
by libjpeg-turbo
by libreoffice-common
by lm_sensors
by metasploit
by mplayer2-git
by openjdk6
by smpeg
by thunderbird
by thunderbird-firetray
by totem
by wine
by xine-lib
and cat /tmp/lddd-script.BbsU/*.txt | grep png
/usr/lib/darktable/plugins/imageio/format/libpng.so
libpng14.so.14 => not found
/usr/lib/darktable/plugins/imageio/format/libpng.so:
It seems that only a Darktable plugin needed correcting, again a re-install fixed that. -
[solved] audio problem after update
hi, after the kernel update of yesterday i have a problem with my audio. after a reboot, my audio is totally absent. i have saw that the pulseaudio process is present and activate, and all graphically is ok (all indicators works well). the strange thing is that if i put headphones and then i releave them, all magically works normally!
Last edited by blauman (2014-06-19 17:12:06)ok i don't need it...i have solved with
Load equalizer and dbus module on every boot
Edit the file /etc/pulse/default.pa with your favorite editor and append the following lines:
### Load the integrated PulseAudio equalizer and D-Bus module
load-module module-equalizer-sink
load-module module-dbus-protocol
on wiki of pulseaudio...i don't know why, i had already done it in past, but i don't know why on my default.pa there aren't these lines..seems now it works! -
[Solved] Xorg crashes after update
Hello,
I've just updated my system, which had'nt been updated for a while.
How ever, after the update. I'm not able to start X anymore, and from the Xorg log file, I can't really figure out why.
When I'm trying to start X, I'm getting the message:
"waiting for X server to shut down Server terminated successfully (0). Closing log file.ndxinit: connection to X server lost extra symbolErrors from xkbcomp are"
Xorg.0.log:
[ 1059.118]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 1059.144] X Protocol Version 11, Revision 0
[ 1059.152] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 1059.161] Current Operating System: Linux klim-desktop 3.9.6-1-ARCH #1 SMP PREEMPT Fri Jun 14 08:12:55 CEST 2013 x86_64
[ 1059.161] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2002e224-ca47-446e-a81a-65398e896d9e ro quiet
[ 1059.178] Build Date: 17 April 2013 02:37:06PM
[ 1059.187]
[ 1059.195] Current version of pixman: 0.30.0
[ 1059.211] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1059.211] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1059.244] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 22 00:33:25 2013
[ 1059.253] (==) Using config file: "/etc/X11/xorg.conf"
[ 1059.261] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1059.261] (==) ServerLayout "Layout0"
[ 1059.261] (**) |-->Screen "Screen0" (0)
[ 1059.261] (**) | |-->Monitor "Monitor0"
[ 1059.261] (**) | |-->Device "Device0"
[ 1059.261] (**) |-->Input Device "Keyboard0"
[ 1059.261] (**) |-->Input Device "Mouse0"
[ 1059.261] (**) Option "Xinerama" "0"
[ 1059.261] (==) Automatically adding devices
[ 1059.261] (==) Automatically enabling devices
[ 1059.261] (==) Automatically adding GPU devices
[ 1059.261] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1059.261] Entry deleted from font path.
[ 1059.262] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1059.262] Entry deleted from font path.
[ 1059.262] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1059.262] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1059.262] Entry deleted from font path.
[ 1059.262] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1059.262] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1059.262] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1059.262] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1059.262] (WW) Disabling Keyboard0
[ 1059.262] (WW) Disabling Mouse0
[ 1059.262] (II) Loader magic: 0x7fcc20
[ 1059.262] (II) Module ABI versions:
[ 1059.262] X.Org ANSI C Emulation: 0.4
[ 1059.262] X.Org Video Driver: 14.1
[ 1059.262] X.Org XInput driver : 19.1
[ 1059.262] X.Org Server Extension : 7.0
[ 1059.262] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1059.263] (--) PCI:*(0:1:0:0) 10de:1200:1462:2387 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 1059.271] Initializing built-in extension Generic Event Extension
[ 1059.280] Initializing built-in extension SHAPE
[ 1059.288] Initializing built-in extension MIT-SHM
[ 1059.297] Initializing built-in extension XInputExtension
[ 1059.305] Initializing built-in extension XTEST
[ 1059.312] Initializing built-in extension BIG-REQUESTS
[ 1059.320] Initializing built-in extension SYNC
[ 1059.327] Initializing built-in extension XKEYBOARD
[ 1059.335] Initializing built-in extension XC-MISC
[ 1059.342] Initializing built-in extension SECURITY
[ 1059.349] Initializing built-in extension XINERAMA
[ 1059.356] Initializing built-in extension XFIXES
[ 1059.363] Initializing built-in extension RENDER
[ 1059.370] Initializing built-in extension RANDR
[ 1059.376] Initializing built-in extension COMPOSITE
[ 1059.383] Initializing built-in extension DAMAGE
[ 1059.389] Initializing built-in extension MIT-SCREEN-SAVER
[ 1059.395] Initializing built-in extension DOUBLE-BUFFER
[ 1059.401] Initializing built-in extension RECORD
[ 1059.407] Initializing built-in extension DPMS
[ 1059.413] Initializing built-in extension X-Resource
[ 1059.419] Initializing built-in extension XVideo
[ 1059.424] Initializing built-in extension XVideo-MotionCompensation
[ 1059.430] Initializing built-in extension XFree86-VidModeExtension
[ 1059.435] Initializing built-in extension XFree86-DGA
[ 1059.440] Initializing built-in extension XFree86-DRI
[ 1059.446] Initializing built-in extension DRI2
[ 1059.446] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1059.446] (II) LoadModule: "dbe"
[ 1059.446] (II) Module "dbe" already built-in
[ 1059.446] (II) LoadModule: "ddc"
[ 1059.446] (II) Module "ddc" already built-in
[ 1059.446] (II) LoadModule: "extmod"
[ 1059.446] (II) Module "extmod" already built-in
[ 1059.446] (II) LoadModule: "glx"
[ 1059.446] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1059.456] (II) Module glx: vendor="NVIDIA Corporation"
[ 1059.456] compiled for 4.0.2, module version = 1.0.0
[ 1059.456] Module class: X.Org Server Extension
[ 1059.456] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
[ 1059.461] Loading extension GLX
[ 1059.461] (II) LoadModule: "int10"
[ 1059.461] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 1059.461] (II) Module int10: vendor="X.Org Foundation"
[ 1059.461] compiled for 1.14.1, module version = 1.0.0
[ 1059.461] ABI class: X.Org Video Driver, version 14.1
[ 1059.461] (II) LoadModule: "record"
[ 1059.461] (II) Module "record" already built-in
[ 1059.461] (II) LoadModule: "vbe"
[ 1059.461] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 1059.461] (II) Module vbe: vendor="X.Org Foundation"
[ 1059.461] compiled for 1.14.1, module version = 1.1.0
[ 1059.461] ABI class: X.Org Video Driver, version 14.1
[ 1059.461] (II) LoadModule: "nvidia"
[ 1059.461] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1059.462] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1059.462] compiled for 4.0.2, module version = 1.0.0
[ 1059.462] Module class: X.Org Video Driver
[ 1059.462] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
[ 1059.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1059.462] (++) using VT number 1
[ 1059.462] (II) Loading sub module "fb"
[ 1059.462] (II) LoadModule: "fb"
[ 1059.462] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1059.462] (II) Module fb: vendor="X.Org Foundation"
[ 1059.462] compiled for 1.14.1, module version = 1.0.0
[ 1059.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1059.462] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 1059.462] (II) Loading sub module "wfb"
[ 1059.462] (II) LoadModule: "wfb"
[ 1059.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1059.462] (II) Module wfb: vendor="X.Org Foundation"
[ 1059.462] compiled for 1.14.1, module version = 1.0.0
[ 1059.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1059.462] (II) Loading sub module "shadow"
[ 1059.462] (II) LoadModule: "shadow"
[ 1059.462] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 1059.462] (II) Module shadow: vendor="X.Org Foundation"
[ 1059.462] compiled for 1.14.1, module version = 1.1.0
[ 1059.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1059.462] (II) Loading sub module "ramdac"
[ 1059.462] (II) LoadModule: "ramdac"
[ 1059.462] (II) Module "ramdac" already built-in
[ 1059.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1059.462] (==) NVIDIA(0): RGB weight 888
[ 1059.462] (==) NVIDIA(0): Default visual is TrueColor
[ 1059.462] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1059.462] (**) NVIDIA(0): Option "NoLogo"
[ 1059.462] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 1059.463] (**) NVIDIA(0): Option "TwinViewOrientation" "DFP-0 RightOf DFP-2"
[ 1059.463] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[ 1059.463] (**) NVIDIA(0): Enabling RENDER acceleration
[ 1059.463] (**) NVIDIA(0): Option "Coolbits" "4"
[ 1059.463] (**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1080_120 +0+0, DFP-2: 1920x1080_120 +1920+0; DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1920+0; DFP-0: 800x600_120 +0+0, DFP-2: 800x600_120 +800+0"
[ 1059.463] (**) NVIDIA(0): Enabling 2D acceleration
[ 1059.897] (II) NVIDIA(GPU-0): Display (BenQ XL2410T (DFP-0)) supports NVIDIA 3D Vision
[ 1059.898] (II) NVIDIA(GPU-0): stereo.
[ 1059.956] (II) NVIDIA(GPU-0): Display (BenQ XL2410T (DFP-2)) supports NVIDIA 3D Vision
[ 1059.956] (II) NVIDIA(GPU-0): stereo.
[ 1059.957] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 1059.957] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1059.957] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 1059.957] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1059.960] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 1059.960] (--) NVIDIA(0): CRT-0
[ 1059.960] (--) NVIDIA(0): CRT-1
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-0) (boot, connected)
[ 1059.960] (--) NVIDIA(0): DFP-1
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-2) (connected)
[ 1059.960] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 1059.960] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-0): 330.0 MHz maximum pixel clock
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-0): Internal Dual Link TMDS
[ 1059.960] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 1059.960] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-2): 330.0 MHz maximum pixel clock
[ 1059.960] (--) NVIDIA(0): BenQ XL2410T (DFP-2): Internal Dual Link TMDS
[ 1059.960] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1059.960] (**) NVIDIA(0): device BenQ XL2410T (DFP-0) (Using EDID frequencies has
[ 1059.960] (**) NVIDIA(0): been enabled on all display devices.)
[ 1059.961] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1059.961] (**) NVIDIA(0): device BenQ XL2410T (DFP-2) (Using EDID frequencies has
[ 1059.961] (**) NVIDIA(0): been enabled on all display devices.)
[ 1059.962] (II) NVIDIA(0): Validated MetaModes:
[ 1059.962] (II) NVIDIA(0): "DFP-0:1920x1080_120+0+0,DFP-2:1920x1080_120+1920+0"
[ 1059.962] (II) NVIDIA(0):
[ 1059.962] (II) NVIDIA(0): "DFP-0:nvidia-auto-select+0+0,DFP-2:nvidia-auto-select+1920+0"
[ 1059.962] (II) NVIDIA(0): "DFP-0:800x600_120+0+0,DFP-2:800x600_120+800+0"
[ 1059.962] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 1059.962] (WW) NVIDIA(0): Unable to find all display devices requested in MetaMode
[ 1059.962] (WW) NVIDIA(0): Orientation string "DFP-0 RightOf DFP-2".
[ 1059.996] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 1059.996] (--) NVIDIA(0): option
[ 1059.996] (--) Depth 24 pixmap format is 32 bpp
[ 1059.997] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1059.997] (II) NVIDIA: access.
[ 1059.999] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1059.999] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1059.999] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1059.999] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1059.999] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1059.999] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1059.999] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1059.999] (II) NVIDIA(0): Config Options in the README.
[ 1060.001] (II) NVIDIA(0): Setting mode "DFP-0:1920x1080_120+0+0,DFP-2:1920x1080_120+1920+0"
[ 1060.065] Loading extension NV-GLX
[ 1060.118] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1060.118] (==) NVIDIA(0): Backing store disabled
[ 1060.118] (==) NVIDIA(0): Silken mouse enabled
[ 1060.118] (**) NVIDIA(0): DPMS enabled
[ 1060.118] Loading extension NV-CONTROL
[ 1060.119] Loading extension XINERAMA
[ 1060.119] (WW) NVIDIA(0): Option "NoDCC" is not used
[ 1060.119] (WW) NVIDIA(0): Option "VideoOverlay" is not used
[ 1060.119] (WW) NVIDIA(0): Option "OpenGLOverlay" is not used
[ 1060.119] (WW) NVIDIA(0): Option "UseInternalAGPGART" is not used
[ 1060.119] (WW) NVIDIA(0): Option "TwinView" is not used
[ 1060.119] (II) Loading sub module "dri2"
[ 1060.119] (II) LoadModule: "dri2"
[ 1060.119] (II) Module "dri2" already built-in
[ 1060.119] (II) NVIDIA(0): [DRI2] Setup complete
[ 1060.119] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1060.119] (--) RandR disabled
[ 1060.122] (II) Initializing extension GLX
[ 1060.152] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1060.152] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1060.152] (II) LoadModule: "evdev"
[ 1060.152] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1060.153] (II) Module evdev: vendor="X.Org Foundation"
[ 1060.153] compiled for 1.14.0, module version = 2.8.0
[ 1060.153] Module class: X.Org XInput Driver
[ 1060.153] ABI class: X.Org XInput driver, version 19.1
[ 1060.153] (II) Using input driver 'evdev' for 'Power Button'
[ 1060.153] (**) Power Button: always reports core events
[ 1060.153] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1060.153] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1060.153] (--) evdev: Power Button: Found keys
[ 1060.153] (II) evdev: Power Button: Configuring as keyboard
[ 1060.153] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 1060.153] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1060.153] (**) Option "xkb_rules" "evdev"
[ 1060.153] (**) Option "xkb_model" "evdev"
[ 1060.153] (**) Option "xkb_layout" "us"
[ 1060.170] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1060.170] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1060.170] (II) Using input driver 'evdev' for 'Power Button'
[ 1060.170] (**) Power Button: always reports core events
[ 1060.170] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1060.170] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1060.170] (--) evdev: Power Button: Found keys
[ 1060.170] (II) evdev: Power Button: Configuring as keyboard
[ 1060.170] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 1060.170] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1060.170] (**) Option "xkb_rules" "evdev"
[ 1060.170] (**) Option "xkb_model" "evdev"
[ 1060.170] (**) Option "xkb_layout" "us"
[ 1060.170] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1060.170] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[ 1060.170] (II) No input driver specified, ignoring this device.
[ 1060.170] (II) This device may have been added with another device file.
[ 1060.170] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7)
[ 1060.170] (II) No input driver specified, ignoring this device.
[ 1060.170] (II) This device may have been added with another device file.
[ 1060.170] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 1060.170] (II) No input driver specified, ignoring this device.
[ 1060.170] (II) This device may have been added with another device file.
[ 1060.171] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 1060.171] (II) No input driver specified, ignoring this device.
[ 1060.171] (II) This device may have been added with another device file.
[ 1060.171] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 1060.171] (II) No input driver specified, ignoring this device.
[ 1060.171] (II) This device may have been added with another device file.
[ 1060.171] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event0)
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 1060.171] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 1060.171] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event0"
[ 1060.171] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x47
[ 1060.171] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 1060.171] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 1060.171] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 1060.171] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 1060.171] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 1060.171] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 1060.171] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 1060.171] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1060.171] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/input/input0/event0"
[ 1060.171] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
[ 1060.171] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 1060.171] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 1060.171] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 1060.171] (II) No input driver specified, ignoring this device.
[ 1060.171] (II) This device may have been added with another device file.
[ 1060.172] (II) config/udev: Adding input device Razer Razer Tarantula Keyboard (/dev/input/event1)
[ 1060.172] (**) Razer Razer Tarantula Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1060.172] (II) Using input driver 'evdev' for 'Razer Razer Tarantula Keyboard'
[ 1060.172] (**) Razer Razer Tarantula Keyboard: always reports core events
[ 1060.172] (**) evdev: Razer Razer Tarantula Keyboard: Device: "/dev/input/event1"
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Vendor 0x1532 Product 0x102
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found keys
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Configuring as keyboard
[ 1060.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2.4/6-2.4:1.0/input/input1/event1"
[ 1060.172] (II) XINPUT: Adding extended input device "Razer Razer Tarantula Keyboard" (type: KEYBOARD, id 9)
[ 1060.172] (**) Option "xkb_rules" "evdev"
[ 1060.172] (**) Option "xkb_model" "evdev"
[ 1060.172] (**) Option "xkb_layout" "us"
[ 1060.172] (II) config/udev: Adding input device Razer Razer Tarantula Keyboard (/dev/input/event2)
[ 1060.172] (**) Razer Razer Tarantula Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1060.172] (II) Using input driver 'evdev' for 'Razer Razer Tarantula Keyboard'
[ 1060.172] (**) Razer Razer Tarantula Keyboard: always reports core events
[ 1060.172] (**) evdev: Razer Razer Tarantula Keyboard: Device: "/dev/input/event2"
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Vendor 0x1532 Product 0x102
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found 1 mouse buttons
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found scroll wheel(s)
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found relative axes
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Forcing relative x/y axes to exist.
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found absolute axes
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Forcing absolute x/y axes to exist.
[ 1060.172] (--) evdev: Razer Razer Tarantula Keyboard: Found keys
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Configuring as mouse
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Configuring as keyboard
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: Adding scrollwheel support
[ 1060.172] (**) evdev: Razer Razer Tarantula Keyboard: YAxisMapping: buttons 4 and 5
[ 1060.172] (**) evdev: Razer Razer Tarantula Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1060.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2.4/6-2.4:1.1/input/input2/event2"
[ 1060.172] (II) XINPUT: Adding extended input device "Razer Razer Tarantula Keyboard" (type: KEYBOARD, id 10)
[ 1060.172] (**) Option "xkb_rules" "evdev"
[ 1060.172] (**) Option "xkb_model" "evdev"
[ 1060.172] (**) Option "xkb_layout" "us"
[ 1060.172] (II) evdev: Razer Razer Tarantula Keyboard: initialized for relative axes.
[ 1060.172] (WW) evdev: Razer Razer Tarantula Keyboard: ignoring absolute axes.
[ 1060.172] (**) Razer Razer Tarantula Keyboard: (accel) keeping acceleration scheme 1
[ 1060.172] (**) Razer Razer Tarantula Keyboard: (accel) acceleration profile 0
[ 1060.172] (**) Razer Razer Tarantula Keyboard: (accel) acceleration factor: 2.000
[ 1060.172] (**) Razer Razer Tarantula Keyboard: (accel) acceleration threshold: 4
[ 1060.173] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1060.173] (II) No input driver specified, ignoring this device.
[ 1060.173] (II) This device may have been added with another device file.
[ 1060.232] (II) evdev: Razer Razer Tarantula Keyboard: Close
[ 1060.232] (II) UnloadModule: "evdev"
[ 1060.232] (II) evdev: Razer Razer Tarantula Keyboard: Close
[ 1060.232] (II) UnloadModule: "evdev"
[ 1060.232] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Close
[ 1060.232] (II) UnloadModule: "evdev"
[ 1060.232] (II) evdev: Power Button: Close
[ 1060.232] (II) UnloadModule: "evdev"
[ 1060.232] (II) evdev: Power Button: Close
[ 1060.232] (II) UnloadModule: "evdev"
[ 1060.624] Server terminated successfully (0). Closing log file.
Last edited by KLIM (2013-06-22 00:07:17)Was the X Server updated, and have you double checked your .xinitrc file to make sure that it's not the cause of the problem?
run
cat /var/log/pacman.log | grep $(date +%F) | grep xorg-server
to see if the X Server was updated today. If you didn't update it today then just substitute the date as follows
... | grep yyyy-dd-mm | ...
Please let us (the community) know whether the grep finds anything in pacman's log.
No worries.
EDIT: If the X Server was updated recently then you can see if downgrading it helps any.
You can see about using downgrade/downgrader to do the actual downgrading for you OR you can check your pkg cache and reinstall an older version of the X Server from there
downgrade xorg-server
OR
downgrader xorg-server
OR
ls /var/cache/pacman/pkg -1 | grep -P "xorg-server-.*-VERSION"
Last edited by lspci (2013-06-21 23:31:58) -
[SOLVED] Wifi dead after update on my samsung laptop
My wifi started acting up a few weeks ago after one of my weekly updates. After some research I found that the issue was with the new version of wpa_supplicant(2.1-3) and downgrading it to 2.0 fixed it. This worked for a couple of weeks and then the wifi stopped working again; now my wifi won't work at all no matter what version I use. The wifi device is seen and loaded. I can bring up the device.
wlp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
link/ether b4:b6:76:36:b5:78 brd ff:ff:ff:ff:ff:ff
I can start wpa_supplicant:
[root@laptop /]# wpa_supplicant -B -i wlp1s0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
And the /var/run/wpa_supplicant/wlp1s0 file is there.
But dhcp doesn't seem to want to start:
[root@laptop /]# dhcpcd wlp1s0
dhcpcd[3544]: sending commands to master dhcpcd process
iw will give me this:
[root@laptop work]# iw dev
phy#0
Interface wlp1s0
ifindex 3
wdev 0x1
addr b4:b6:76:36:b5:78
type managed
If I scan the device (not sure way it took a couple of tries, and I removed all the other ssid's to just show the one that I'm trying to connect to):
[root@laptop work]# iw dev wlp1s0 scan
command failed: Device or resource busy (-16)
[root@laptop work]# iw dev wlp1s0 scan
command failed: Device or resource busy (-16)
[root@laptop work]# iw dev wlp1s0 scan
BSS d0:57:85:ac:9e:67(on wlp1s0)
TSF: 7581472930 usec (0d, 02:06:21)
freq: 2437
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -27.00 dBm
last seen: 0 ms ago
Information elements from Probe Response frame:
SSID: Verizon-291LVW-9E67
Supported rates: 1.0* 2.0* 5.5* 6.0 9.0 11.0* 12.0 18.0
DS Parameter set: channel 6
Country: US Environment: bogus
Channels [1 - 11] @ 27 dBm
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
HT capabilities:
Capabilities: 0x2c
HT20
SM Power Save disabled
RX HT20 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 8191 bytes (exponent: 0x000)
Minimum RX AMPDU time spacing: No restriction (0x00)
HT RX MCS rate indexes supported: 0-7
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: nonmember
* non-GF present: 0
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
WPA: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: CCMP TKIP
* Authentication suites: PSK
RSN: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: CCMP TKIP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Response Type: 3 (AP)
* UUID: a3df0299-4e5c-59f1-9678-b91acdec9656
* Manufacturer:
* Model:
* Model Number:
* Serial Number:
* Primary Device Type: 0-00000000-0
* Device name:
* Config methods: Label, Display, PBC, Keypad
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
Kind of stuck now and not really sure what else I can do. Wifi-menu won't connect either but that seems to be because it brings the wifi connection down ??? Since wpa_supplicant seems to be working now, I kept the update and all packages are updated. I always run 'pacman -Syu' during an update so all the packages should be correct.
Edit: Solution
Ok, I was messing around with this some more and found that if I replaced /etc/wpa_supplicant/wpa_supplicant.conf with the one that I already had in /etc/wpa_supplicant.conf it started to work. I'm not sure when it stopped looking at /etc/wpa_supplicant.conf and started looking at /etc/wpa_supplicant/wpa_supplicant.conf but that seemed to be the issue.... even though, before this, I couldn't even connect to an open network. Anyway, that 'seemed' to be to issue in this case.
Last edited by 2Pug (2014-04-11 01:32:30)I have two wifi hotspots that worked before the update and now both fail to connect after the update. There are no open spots around me and I don't want to open one here because it's alloted only a tiny amount of data and people would be swallowing it up the minute I opened it. I'll try it once I get home though but I would think, if it was a wpa issue, wpa_supplicant would have failed and it didn't.
-
[Solved] Several problems after update
Hi.
I updated my system (yaourt -Syua).
Since then I have three problems, I don't know how much connected to each other.
First,
I can't enter LXDE. After I login, I get back the login screen of xdm.
When I go init 3, and start startx from console, then I get a black screen, until I do AltCtrlF7.
Meanwhile on the console this happens:
[laca@varch ~]$ startx
X.Org X Server 1.12.4
... etc ... etc ...
errors from xkbcomp are not fatal to the X server
No protocol specified
waiting for X server to begin accepting connections .
No protocol specified
No protocol specified
No protocol specified
No protocol specified
and so on.
Second,
My .Xauthority and .bash_history files got reset to 0 length.
And every time I log out, or explicitly do a history -w , the .bash_history file gets touched, but remains 0 length.
Third,
When I ssh with X forwarding to that machine, and want to start an X client, then I get:
X11 connection rejected because of wrong authentication.
(It may be independent of the update.)
Any help appreciated.
Laca
Last edited by Laca (2012-10-01 17:34:35)[2012-09-24 20:58] Running 'pacman -Sy'
[2012-09-24 20:58] synchronizing package lists
[2012-09-24 20:59] Running 'pacman -S core/pinentry core/libpipeline core/sysvinit core/hwids core/sudo core/man-db core/util-linux core/procps-ng core/archlinux-keyring core/make core/tzdata core/automake core/coreutils core/sysvinit-tools extra/libsigc++ extra/sdl extra/samba extra/gtk2 extra/gtk-update-icon-cache extra/git extra/lcms2 extra/hunspell extra/taglib extra/smbclient extra/libwbclient extra/qt extra/vala community/libfm community/pcmanfm'
[2012-09-24 21:00] Running 'pacman -Sy'
[2012-09-24 21:00] synchronizing package lists
[2012-09-24 21:04] Running 'pacman -S -u'
[2012-09-24 21:04] starting full system upgrade
[2012-09-24 21:06] Running 'pacman -Sy'
[2012-09-24 21:06] synchronizing package lists
[2012-09-24 21:07] Running 'pacman -S core/pinentry core/libpipeline core/sysvinit core/hwids core/sudo core/man-db core/util-linux core/procps-ng core/archlinux-keyring core/make core/tzdata core/automake core/coreutils core/sysvinit-tools extra/libsigc++ extra/sdl extra/samba extra/gtk2 extra/gtk-update-icon-cache extra/git extra/lcms2 extra/hunspell extra/taglib extra/smbclient extra/libwbclient extra/qt extra/vala community/libfm community/pcmanfm'
[2012-09-24 21:09] removed eject (2.1.5-7)
[2012-09-24 21:09] upgraded pinentry (0.8.1-4 -> 0.8.2-1)
[2012-09-24 21:09] upgraded libpipeline (1.2.1-1 -> 1.2.2-1)
[2012-09-24 21:09] upgraded util-linux (2.21.2-5 -> 2.22-6)
[2012-09-24 21:09] upgraded coreutils (8.17-3 -> 8.19-1)
[2012-09-24 21:09] upgraded sysvinit-tools (2.88-7 -> 2.88-8)
[2012-09-24 21:09] upgraded sysvinit (2.88-7 -> 2.88-8)
[2012-09-24 21:09] upgraded hwids (20120831-1 -> 20120906-1)
[2012-09-24 21:09] upgraded sudo (1.8.6-1 -> 1.8.6.p3-1)
[2012-09-24 21:09] upgraded man-db (2.6.2-1 -> 2.6.3-1)
[2012-09-24 21:09] upgraded procps-ng (3.3.3-3 -> 3.3.3-6)
[2012-09-24 21:09] upgraded archlinux-keyring (20120812-1 -> 20120915-1)
[2012-09-24 21:09] upgraded make (3.82-4 -> 3.82-5)
[2012-09-24 21:09] upgraded tzdata (2012e-1 -> 2012f-1)
[2012-09-24 21:09] upgraded automake (1.12.3-1 -> 1.12.4-1)
[2012-09-24 21:09] upgraded libsigc++ (2.2.10-2 -> 2.2.11-1)
[2012-09-24 21:09] upgraded sdl (1.2.15-2 -> 1.2.15-3)
[2012-09-24 21:09] upgraded libwbclient (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:09] upgraded smbclient (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:10] upgraded samba (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:10] upgraded gtk-update-icon-cache (2.24.12-1 -> 2.24.13-1)
[2012-09-24 21:11] upgraded gtk2 (2.24.12-1 -> 2.24.13-1)
[2012-09-24 21:12] upgraded git (1.7.12-1 -> 1.7.12.1-1)
[2012-09-24 21:12] upgraded lcms2 (2.3-2 -> 2.4-1)
[2012-09-24 21:12] upgraded hunspell (1.3.2-1 -> 1.3.2-2)
[2012-09-24 21:12] upgraded taglib (1.7.2-2 -> 1.8-1)
[2012-09-24 21:14] upgraded qt (4.8.2-3 -> 4.8.3-3)
[2012-09-24 21:14] installed vala (0.16.1-1)
[2012-09-24 21:16] upgraded libfm (1.0-2 -> 1.0.1-1)
[2012-09-24 21:16] upgraded pcmanfm (1.0-1 -> 1.0.1-1)
[2012-09-24 21:31] Running 'pacman -Sy'
[2012-09-24 21:31] synchronizing package lists
[2012-09-24 21:31] Running 'pacman -S -u'
[2012-09-24 21:31] starting full system upgrade
[2012-09-24 21:33] removed virtualbox-archlinux-modules (4.1.22-1)
[2012-09-24 21:33] removed virtualbox-archlinux-additions (4.1.22-1)
[2012-09-24 21:33] >>> Updating module dependencies. Please wait ...
[2012-09-24 21:33] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-09-24 21:33] ==> Building image from preset: 'default'
[2012-09-24 21:33] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-09-24 21:33] ==> Starting build: 3.5.4-1-ARCH
[2012-09-24 21:33] -> Running build hook: [base]
[2012-09-24 21:33] -> Running build hook: [udev]
[2012-09-24 21:33] -> Running build hook: [autodetect]
[2012-09-24 21:33] -> Running build hook: [pata]
[2012-09-24 21:33] -> Running build hook: [scsi]
[2012-09-24 21:33] -> Running build hook: [sata]
[2012-09-24 21:33] -> Running build hook: [uresume]
[2012-09-24 21:33] -> Running build hook: [filesystems]
[2012-09-24 21:33] -> Running build hook: [usbinput]
[2012-09-24 21:33] -> Running build hook: [fsck]
[2012-09-24 21:34] ==> Generating module dependencies
[2012-09-24 21:34] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-09-24 21:34] ==> Image generation successful
[2012-09-24 21:34] ==> Building image from preset: 'fallback'
[2012-09-24 21:34] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-09-24 21:34] ==> Starting build: 3.5.4-1-ARCH
[2012-09-24 21:34] -> Running build hook: [base]
[2012-09-24 21:34] -> Running build hook: [udev]
[2012-09-24 21:34] -> Running build hook: [pata]
[2012-09-24 21:34] -> Running build hook: [scsi]
[2012-09-24 21:34] -> Running build hook: [sata]
[2012-09-24 21:34] -> Running build hook: [uresume]
[2012-09-24 21:34] -> Running build hook: [filesystems]
[2012-09-24 21:34] -> Running build hook: [usbinput]
[2012-09-24 21:34] -> Running build hook: [fsck]
[2012-09-24 21:34] ==> Generating module dependencies
[2012-09-24 21:34] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-09-24 21:34] ==> Image generation successful
[2012-09-24 21:34] upgraded linux (3.5.3-1 -> 3.5.4-1)
[2012-09-24 21:34] upgraded linux-headers (3.5.3-1 -> 3.5.4-1)
[2012-09-24 21:34] ===> You may want to load vboxguest, vboxsf and vboxvideo
[2012-09-24 21:34] installed virtualbox-guest-modules (4.2.0-2)
[2012-09-24 21:34] installed virtualbox-guest-utils (4.2.0-3)
[2012-09-24 21:35] Running 'pacman -S community/doublecmd-gtk2'
[2012-09-24 21:36] /usr/bin/update-desktop-database
[2012-09-24 21:36] /usr/bin/update-mime-database
[2012-09-24 21:36] /usr/bin/gtk-update-icon-cache
[2012-09-24 21:36] installed doublecmd-gtk2 (0.5.4-2.1)
Hvala
Laca
Maybe you are looking for
-
Creating And Deploying A JWSDP Web Service Client to Weblogic 8.1
This setup produces an EAR containing a message driven bean in a jar file. When the MDB receives a message it checks to see if there is any data in a database table and if so calls the web service with that data. These instructions are for MS-Windows
-
Hi Experts, I need to include some custom fields in transaction MIRO/MIR7 at item level.. For this I found BadI MRM_ITEM_CUSTFIELDS and implemented it. When I tried to input my new custom fields in subscreen(custom screen - Prog SAPLMR1M , screen -60
-
Upgrading Robo 5.0 files to 7.0
Hi, I need to upgrade the Robo files created in Robo 5.0 to 7.0. Can anyone please let me know what are the issues that would encounter while upgrading? As of now, I have not faced any problems with styles, links and others when I have upgraded. But
-
Can't open internet accounts preference pane in system preferences
When i clicking internet accounts in the system preferences, Preferences error, could not open internet accounts preference pane
-
I purchased one single song and get an error msg -3259 saying it can't download, the network connection timed out. I've tried upgrading my Itunes, restarting my Itunes, and have checked my internet connection making sure it is active at the time of d