Standard cost audit report in SAP BI

Dear Gurus
We need a Cost audit report (module: CO) (detail required as per CAS  and rules) in BI, kindly suggest if there is a standard report for the same,if not then kindly suggest how to go about it.
Is there a standard report for the same in ECC?

Pls have a look into FI part of Business Content especialli to CO module:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/61/7beb3cad744026e10000000a11405a/content.htm

Similar Messages

  • Standard Cost Analysis Report  (MCI3)

    Hi,
    On SAP standard Cost Analsys report, i have been unable to dig out the reason of not populating values in following few columns.
    - Int. wage costs
    - Int. Mat. Costs
    - Ext. Wage Costs
    - Extenal Mat Costs
    - Services Costs
    Can anybody guide me in populating these values.
    Regards
    Shah

    hi
    if you have posted any material against the order ,then the cost will be reflected in int.material cost ,which is also same for other parameters
    also check whether you info structure is switched on OMOS
    regards
    thyagarajan

  • Standard cost element reports are not available

    Hi everyone,
    I noticed that there are no standard cost element reports available in our SAP application. Is this because they are not imported or is this caused by another problem ?
    Help would be greatly appreciated and points will be rewarded
    Kind regards
    Message was edited by:
            Björn Demol
    Message was edited by:
            Björn Demol

    can you tell me how did u resolve this issue
    Regards
    Bilal

  • SAP Standard Cost Centre reports

    Hi,
    I would like to use the following SAP Standard report S_ALR_87013614 but cannot exclude certain cost elements.
    The report unfortunately only has the functionality to include cost elements but there is no option to exclude any cost elements. The "exclude from selection" option button is greyed out.
    Can anyone give me a workable solution to overcome this problem.
    Regards
    Ropetra van nelson

    Hi Ropetra van nelson,
    One of the possible soultion is that you can create Cost Element group  in KAH1with required cost element. When you are accessing the transaction code S_ALR_87013614 , you can use this group for cost center reporting.I hope this will be useful.
    Thanks
    Panneer Selvam

  • Standard Cost Estimate Report Comparing Current vs Previous Year

    Hi Everyone,
    Is there a standard SAP report that would provide materials with previous and current year standard cost estimates as found within the Costing 2 view of the material master?
    Thanks,
    Pete

    Hi,
    You need to look into periodic reports. Here is the best one to provide the copmarision between two period -
    S_ALR_87099932.
    Go into the report & select the costing runs taken in two diffrent periods. You will get all the required results of prices for two periods/costing runs.
    Regards,
    Amol

  • Cost Center Report in Object Currency

    Hi there,
    Any idea if it is possible to display the SAP standard Cost Center Reports in object currency instead of controlling area currency.
    Thank you.

    Hi there,
    Thanks for the reply. What about the SAP Standard report, i.e., S_ALR_87013611 - Cost Centers: Actual/Plan/Variance ?
    How can we have the object currency displayed?
    Pls advise.
    Thank you.

  • Query for Inventory Audit Report

    hi experts,
    I would like to create a inventory report  using Crystal Reports 2008 which looks exactly the same as Inventory Audit Report in SAP Business One 2007A
    Report requirement:
    List down all the items with its Item Code, Description, Quantity and Item Cost (easy right?)
    The only condition:
    I would like to filter my report by FromDate and ToDate.
    For example:
    Current date 15.07.2009
    If I run the report by putting in 01.01.2009 to 31.01.2009, the result will show me:
    item, with its respective info and most importantly the Quantity and Item Cost as at 31.01.2009 (similar to closing stock)
    Any query for above report?
    Please help.
    Thank you.

    Hi,
    It may not be so simple as you are trying to reproduce the historical value.  I believe you have to create a temporary table first.  Or you may use Command feather to get the required data in advance.
    Thanks,
    Gordon

  • Standard Quality Management Report

    Plz any one tell me standard quality control reports in sap for detail that how much material accpet and reject after result analysis/usage decision

    Hi Punit,
    Please try following t-codes,
    MCVA
    MCVE
    MCVE
    MCXA
    MCXC
    Anand

  • Flow Chart of Standard Cost

    Hi SAP Guru's,
    I want to understand how Standard Cost is captured in SAP Environment. For this i need a Flow Chart Diagram showing how cost is captured and what are the various T-Codes used at each level.
    Regards,
    Farhan.

    Hi Farhan
    Though this falls under the category that is prohibited here (Basic questions), Still I would like to answer your Q because the question you are asking is a sulking one. It really sucks the blood out of you
    Let me put it in a straight forward way without technical jargons
    Std costing follows a simple mathematical formula i.e. Qty (x) rate = Amount
    Quantity: Comes from BOM and Routing
    In BOM - You have components (To make cake, you need Flour, Sugar, Cream, etc)
    In Routing: You have process parameters like Labor hrs, Machine hrs, Steam, Electricity, etc
    Rates: Come from Valuation Variant.. You specify a sequence of options using which the Quanities can be multipled to arrive at cost
    Example - A material master has Prices like MAP, Std price, Tax price, Commercial Price, Planned price, etc.. Using Valuation varaint, you tell the system which price it should look for
    Finally, its the Qty (x) rate = Amount
    Br. Ajay M

  • Where to find Standard Audit Trail reports in SAP BPC 10

    Hi Experts,
    We being new to SAP BPC v 10 are stuggling to find the standard Audit trail reports which were present in version 7.
    Can any body guide us with the roadmap by which we can see those standard Audit trail reports in version 10.
    Thanking in Anticipation for a quick and favorable response.

    Hi Sanjeev,
    In SAP BI, we have standard BI content reports which is present which just needs to be installed and is ready to be used.We are trying to find such Audit trail reports and unable to find those reports in SAP BPC 10 NW version.
    Could you please guide us if we are missing anything.
    Thanks in advance.
    Thanks & Regards,
    M.S

  • Custom SAP report used to display an average standard cost per material.

    Hi All,
    I need to implement a report with the following functionality,
    This is a custom SAP report used to display an average standard cost per material.  Standard cost data is stored in SAP at the Material/Plant level.  This report will gather the individual Standard Costs at each applicable plant (restricted by selection screen input and additional logic specified in more detail in the u201CReport Fieldsu201D section) for applicable Materials (restricted by selection screen input; if not specified all materials should be returned) and calculate an average standard cost for each material.  The corresponding Currency and Base Unit of Measure will also be displayed.
    Additionally the relevant u201CCommodity Code/Import Codeu201D information should be displayed for each material returned.  This attribute is also stored at the Material/Plant level.  To determine the value of this field for each relevant material, the report logic must retrieve the values stored for each plant.  If all values are the same, the value can be output to the report.  If not all values are equal, a message u201CNot Consistentu201D should be output.  It should be noted that if all values are u201Cnull,u201D a null value should be returned in the report.
    Can any one provide me with sample code for the same??
    Thanks Debrup.

    Hello,
    Also refer this [ THREAD|Re: error in Fleet management customising] and [link|Error when recording measurements in IFCU]
    Regards
    Nav
    Edited by: Desire_Naveen on Nov 4, 2009 12:35 PM

  • Report in SAP -cost of the material in different periods

    Hi,
    Is there a standard report in SAP which will give me the cost of the material in different periods.
    The issue is the material price is changed frequently for a perticular material "X''. I want to have a look at the cost of material in different periods.
    I can track the changes from MM03,but the user needs a feasible solution than this.
    Thanks
    Aravind

    Hi,
    I got the required from MBEWH table.
    Thanks
    Aravind

  • Report showing labor and machine time based on standard cost estimate

    Hi Friends,
    Ours is an Manufacturing organisation & we have a requirement of report showing machine and labor time as per part wise & cost center wise. We need to run the report before saving standard cost estimate [CK11N]  in order to see the part wise or cost center wise discrepancies in machine and labor time. If any one could help in creating such report in SAP  it will be of great help.
    Regards,
    Varsha

    Hi Varsha,
    you can jump from CK11N to a own report by
    Menu Function 'Costs -> User Exit Display'
         Cost Report 1 / 2 / 3
    The own report can be implemented via (SMOD) enhancement SAPLXCKA
    The report will be handed over the currently displayed in the program interface.
    some example coding is provided for the exit.
    compare SAP Note No. 71146
    best regards,   Udo

  • File-XI-SAP Control/Audit Report

    Hi,
    Any suggestions on the best way to obtain a control report when inputting data into SAP via XI.
    For example. Input file contains five records each containing a field with a value of 100. I need a summary report containing a line to say - Total value = 500. Pretty simple requirement when just using ABAP to read a file and process it, but XI.....
    I think there are several options but I would like some advice. Options as I see it are :
    1. Pass whole file as a single payload into SAP, and process almost as I would have done using traditional ABAP logic.
    2. Individual IDOC's for each record then have a separate report to evaluate the IDOC's. In which case I would need a way of recording which IDOC's came from which file....
    3. Use a BPM to trigger the control report either pre or post file processing.
    Any practical advice greatly appreciated.
    Nigel

    Hi Nigel,
    >>>>3. Use a BPM to trigger the control report either pre or post file processing
    in my opinion this one is the most flexible, why?
    because this way you separate standard communication logic from the audit reporting
    if your audit reporting needs will change you don't have to touch the standard communication just change
    the "pre or post file processing"
    but obviously it also depends on your scenario:
    number of messages, BPM usage, etc... 
    Regards,
    michal

  • Report for Net Sales amount ,Other Allowances, standard Costs

    Hi,
    is there any SAP standard report to generate report as We need to run a report to see by Material and/or Product line the Net sales amount and units for a given time period. By net sale I mean Gross sales net return, net other allowances
    also we need to have standard costs in the report.
    Please let me know if you know of any report in SAP which can give me these values.
    Thanks,
    Arthy

    do you manage profitability analysis?
    in case, yes, you can have report with net turnover and standard cost.
    1. about net turnover you need to map sales order condition for net tunrnover to value COPA value fileds.
    2. about standard cost you need to activate COPA valuation.
    it is only a short suggestion, but you can find much information on this topics in the forum
    Paolo

Maybe you are looking for

  • Substitute exchange rate in MIRO

    Hi All, I have a requirement where I have to substitute INVFO-KURSF based on the company code currency. This field comes in the 'Details' tab in MIRO header. The requirement is to see the field substituted when user clicks on Details tab. Please let

  • Flex Builder windows rearranging

    Another question concerning Flex Builder. I've got 2 displays and i'd like to move some windows like Flex Navigator, Console, Sarch and Problems to the second display. It would seem quite simple - just drag views to the second display. It works, but

  • Looping menu

    I created a project with a main menu.  I added motion to the menu with video and audio.  It works as I expected, except the audio loops as I planned, but the video goes to white once the 3.54 minute video is finished.  I tried various things such as

  • About use native sql

    how to use the native sql get the following value REPORT  YXLIU0010. DATA: exc_ref TYPE REF TO cx_sy_native_sql_error,       error_text TYPE string. DATA: BEGIN OF ITAB OCCURS 0 ,   F_BH(30) TYPE C,   F_NCYEJE TYPE p DECIMALS 2, END OF ITAB.   TRY.  

  • Aggregate rows with count and add fraction of whole result set sum

    Here's the explaination by example # Source table ID | TYPE 1 | A 2 | A 3 | B 4 | C 5 | C 6 | A 7 | C 8 | A Now, I'm aggregating and counting: TYPE | count(*) A | 4 B | 1 C | 3 I need to assign to row also an information about the fraction of overall