Standard FM LC_POPUP_RADIO_5 blank in ECC 6.0

Hi All,
I require some help regarding a FM which was working fine in ECC 4.6C and is not working in ECC 6.0.
There is a FM LC_POPUP_RADIO_5 which was working fine in ECC 4.6C. But now we have upgraded SAP to ECC 6.0. But this FM (LC_OPOUP_RADIO_5) has stopped working. When I went to SE37 and checked the FM, I noticed that all the code inside the FM is commented. It is a standard FM, so I can't even make changes to it.
This FM when used in ECC 4.6C, used to provide a popup box containing 5 options to select from. I am looking for an alternate FM having 5 text options, which I can use instead of this FM.
Please provide your inputs on the above. This has impacted a very important application and needs to be rectified as soon as possible.
Thanks & Regards,
Namrata

Hi Lakshman,
Thanks a  lot for your inputs. I have already checked these FMs. But in these FMs I will get only 2,3 and 6 options. In case of WCFW_POPUP_RADIO FM all the six options will be displayed in the popup. Whereas I require just 5 options to be displayed. So, this will nto work.
FMs K_KKB_POPUP_RADIO2 and K_KKB_POPUP_RADIO3 provide only 2 and 3 options, resp, in the popup. So, these also do not serve the purpose.
Do let me know if you know any FM with 5 text options displayed in the popup.
Thanks & Regards,
Namrata

Similar Messages

  • APOKZ blank but ECC-SCM integration works OK!

    Hi Gurus,
    I am surprised by this system behaviour in ECC 6 & SCM 7.02 where in I just deleted all models and created/ generated new models, activated them and did the consistency check after activation...all was good.
    Out of curiosity, I checked the APOKZ field in MARC, to my surprise all materials had blank. Executed the RAPOKZFX report which came back with Error: APOKZ not set for material/ plant.
    Tested my GATP scenarios by creating sales order, executing GATP check, then checked the result both in ECC & SCM was all good. Plant substitution had happened and GATP check on available stocks was done. Sales order was in SCM.
    Questions: Why is 3 not set on APOKZ although my material & site combinations seem to be in an active model? and why does RAPOKZFX return with error when I try to set APOKZ indicator.
    Small observation: After generating Material, ATP, Stock models (before activating them), during each of these steps consistency check had failed with warnings like material master and plant not in model. Although, after activating each of these the consistency check returned with no errors.
    Just FYI - followed the following sequence still the same result:
    RAPOKZFX - Program for Adjusting Field MARC-APOKZ With Integration Models
    RCFUPDCR - Reorganization of superfluous CIF update counters         
    RCFORDCH - Check for Inconsistencies in Table CIFORDMAP        
    RCIFIMAX - Generate and reconcile the runtime version of active models        
    RCIFIMDL - Deletion of superfluous filter object keys in CIF_IM* tables        
    RCIFMTDE - Program for Maintaining the Materials Deactivated in CIF        
    RDELALOG  - Delete Application Log Entries

    Hi Anil,
    Thanks for your response but I wasn't in change mode for sure. Will get back to you after deleting all products and generating the IM again.
    It's a new IS Retail implementation & so far we haven't added any material master enhancements as far as CIF or IM's are concerned hence I am hoping that IM's should work on all materials in the selection criteria irrespective of the values in their MARC fields?
    To put it in another way, are there any "key" material master fields in standard that either switch ON or switch OFF the material from the IM?

  • Standard Role "SAP_QAP_BW_DASHBOARDS" Unavailable in ECC System

    Hello Experts.
    We are trying to Implement Embedded Analytics in our R3 system, from the SAP documentation I came to know that in order to execute the standard Reports/Dashboards as a pre-requisite we need to have the role "SAP_QAP_BW_DASHBOARDS" assigned to user. but we are unable to find the mentioned standard role in our system.
    We have already raised an OSS message but it is also of not much help.
    we are at SAP ECC 6.0 EHP 6.
    Any help/comment would be appreciated.
    Thanks & Regards
    Neeraj.

    We also got a reply from SAP saying
    "The role SAP_QAP_BW_DASHBOARDS was never delivered (and it was not
    planned to be delivered, too). This role was just meant for SAP
    internal usage during dashboard development. Thus, the documentation
    which states that you should assign this role to your users for
    dashboard usage is incorrect."
    and they suggested we shall create our roles on our own based on our business need, for example how the roles shall look like they have created a note "2001264" where its clearly mentioned how to create the role.
    Hope this help to anyone else having the same problem.
    Thanks & Regards
    Neeraj.

  • Acrobat 8 Standard - Add multiple blank signature fields

    Hello. I remember in prior versions of Acrobat being able to add several blank signature fields for others to sign at a later time. I am unable to figure out how to do this using Acrobat 8 Standard. Would someone please help? Thanks.

    No version of Acrobat Standard provides the full functionality of Acrobat Pro.
    The Pro release always provides more.
    If you want to create PDF forms that can be filled in and saved by others who use Adobe Reader you must use Acrobat X Pro (to "reader enable" the PDF).
    Comparison matrix:
    For Acrobat Pro Versions (7, 8, 9, X) —
    http://www.adobe.com/products/acrobatpro/buying-guide.displayTab2.html
    For Acrobat Standard Versions (7, 8, 9, X) —
    http://www.adobe.com/products/acrobatstandard/buying-guide.displayTab2.html
    Acrobat X Product comparison —
    http://www.adobe.com/products/acrobat/matrix.html
    There is an upgrade path from Acrobat 8 Standard to Acrobat X Pro.
    See:
    http://www.adobe.com/products/acrobatpro/buying-guide.displayTab3.html
    There is an upgrade path from Acrobat 8 Standard to Acrobat X Standard.
    See:
    http://www.adobe.com/products/acrobatstandard/buying-guide.displayTab3.html
    Be well...

  • There is no standard smartform for PO In ECC 6.0 R-2

    HI Experts
    I am not able to getting smartform in my system
    how can i installed smartform in my system
    My version Is Ecc 6.0 With R-2
    Kindly provide all documentation regarding  Installation Of  smartform
    Help Me Out
    Need exact  solution donu2019t  put  old ides please

    i am working in sap b1 i want to change field
    in SAP NetWeaver .NET Technologies can give any ref guide.
    Edited by: Rajkumar Gupta on Jun 2, 2009 11:16 AM

  • List of standard HR workflows in ECC 6.0

    Hello All,
      Does any body have the list of standard workflows in HR in ECC 6.0 ??
    Thanks in advance
    Uday

    I think you can find it yourself from
    SWO1->Business Object Repository->All Objects->Enter->Select the HR Related Modules(Like Personnel Managemnt,Payroll etc.)
    Thanks
    Arghadip

  • Load data from BW 7.0 DSO into a ECC 6.0 SD standard/Custom pricing table

    Gurus,
    We have a scenario, where we need to load data from a BW DSO to SD standard/Custom pricing table in ECC 6.0. That data will be few thousand records.
    Per my knowledge, in BPS, retractors are available to update data from BW to ECC and OpenHub also can be used to handle similar scenarios.
    Any one of you came across similar scenario?
    If you have any third option (not BPS rectors or OpeHub) as a solution to handle this kind scenario, and share the knowledge, it will be greatly appreciated.
    Thanks in advance,
    Vittal

    Hi Yogesh,
    Thanks for your reply.
    We have large data volumes for Billing datasource and hence moving flat files using PI is not an option and also as i mentioned a part of requirement is monitoring of the whole process as well. What i mean by this is if a 1000 billing document items were passed on to CRM7 to create a member activities and because of some reason a member activity was not created for one of the billing doc items, we should know the problematic record and reason why member activity was not created in CRM7 (reason code). And then be able to fix it.  All this requires an end to end monitoring capability and also guaranteed delivery of data to CRM7.
    Hence i was trying to explore the enterprise web service option.
    What i am not sure of is how to expose BW DSO delta request to CRM7 using a web service ? or any other method that gives end to end monitoring capability and also guaranteed delivery of data to CRM7.
    Any other suggestions ?
    Thanks
    CK

  • How to check the calculation of standard price in ECC.

    Hello All
    I have a datasource 0co_pc_act_05 material valuation prices which  has the standard price. Now I would like to check how this standard price is calculated in ECC ( I mean on what basis it is calculated).
    I have spoke to my Business folks they say it should be (Quantity/per) * Amt.... How can I check the formula of standard price in ECC.
    Thanks
    Yeachni

    This extractor is based on table MBEW and standard price (STPRS) exists in the table. I don't think there is any logic is extracting this.

  • Integration of ECC Scheduling Agreement (Doc Type LP) with SAP TM

    Hello Experts,
    I am trying to integrate ECC Scheduling Agreement (Doc Type LP) to create OTR in TM System. I have maintained below settings:
    1. Create and Activate Control Key
    2. Output determination procedure linked to LP has output type TRS0 with requirement 27 assigned.
    3. Output condition record has been created
    4. I have checked Business Functions are also active
    I was able to transfer other Document Types like OR; RE; FD (ECC Free of Charge); SDF (ECC Subsequent Delivery - Free of Charge); Consignment Fill up and Consignment Pick up by maintaining these settings, but not able to push Scheduling Agreement LP to TM.
    The output TRS0 is not appearing automatically and if I try to insert and execute this output in Scheduling agreement, Output is failing with error message: "Order is not TM-relevant"
    Is there any other config or mapping or SAP Note that needs to be applied to achieve this integration? Because I believe standard integration is available for ECC Scheduling agreement (I have read in help.sap.com).
    Thanks and Regards,
    Vikram Bhardwaj

    Hello Vikram,
    You mean this documentation:http://help.sap.com/saphelp_tm81/helpdata/en/9c/787f3c0a771e57e10000000a114084/content.htm?frameset=/en/44/b0488e9c35612be10000000a155369/frameset.htm ?
    I think there is talking about the integration for SCM Basis as SOS, not Order Integration.
    Regards, Marcelo Lauria

  • Replication of Quotations from ECC to CRM

    Hello Experts,
    The scenario is as follows:
    I am required to replicate all the quotations from ECC to CRM.
    My question is: what are the various middleware settings to be done?
    I have created a transaction type for quotation by the same name in ECC and CRM so far.
    It would be great if I can get help on the following:
    1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
    2.What action profile do I need to maintain on ECC and CRM side for quotation?
    3.How should the number ranges be defined on ECC and CRM side for quotation?
    4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
    5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
    6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
    What more needs to be done?
    Once the settings are complete and fool-proof,  I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
    What are the filter settings to be maintained in SalesDocument Object?
    Experts, this is my requirement and all the pointers would be greatly helpful.
    Many thanks,
    VSK.
    Edited by: venkatskumar on Feb 16, 2011 12:17 AM

    Hello
    Please find below my reply :-
    1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
    >> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
    2.What action profile do I need to maintain on ECC and CRM side for quotation?
    >> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
    3.How should the number ranges be defined on ECC and CRM side for quotation?
    >> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
    4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
    >> Yes
    5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
    >> Not sure on this. Requesting other experts to answer this.
    6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
    >> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
    Hope this will be helpful.
    Regards

  • Is any different between ECC 5.0 and ECC 6.0 for Excel export?

    Dear all,
    As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
    In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

    In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
    I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
    Thanks again.

  • C4C integration with ECC 5.0

    Guru,
    My company is looking for implementing cloud for customer, but our backend system is running on ECC 5.0.
    SAP had strongly recommended us to upgrade our ECC before implementing C4C project.
    Through some reading, it seems that integration prerequisite is ECC has to be version 5.0
    Or there is any workaround to integrate (standard integration) C4C to ECC 5.0 through HCI? Like by applying or enhancing standard iflow that released for ECC 6.0?
    Thanks.
    Cheers,
    Jim

    Not sure where you have read that ECC 5.0 would be supported. The official SAP position is summarised in the table below. You can clearly see that some functionalities even depends on what EHP level you are at with ECC 6.0.
    SAP PI and HCI leverage the same iFlow content.

  • Downsaving/exporting to IDML results in blank document

    HI all
    I am having a problem where I have a perfectly good .indd file (CS6) which I am downsaving for my client to .idml.
    Whether I downsave or export to the .idml file, when I open the file it is a single blank page--all the content is gone and it's not even the same size, it's just a standard letter size blank document. I tested with another file, and it saved normally to .idml, so there is something wrong with this file, but I haven't the slightest clue what it could be.
    Has anyone had this problem before or can suggest a solution?
    Many thanks for any help,
    Debbie Berne

    odd...
    for a simple document you could move the pages to a new document (via the Pages pallet) and export idml from that.

  • How to correctly load an external swf file into iosAir app? I'm getting blank screen.

    So this code works flawlesly on Air for Android, it even works fine when I test the movie in Flash, but once I export it, I'm getting a blank screen. I made an swf with a square and withotu any code, and flash still fails to load it. It's weird cause everything works fine when I use the interpreter debugging option, but when I switch to standard debugging the blank screen appears on my ipad. I've read somewhere that it's caused by the way flash saves the link to external files. Thus after the file is compiled Flash fails to find the prefiously added files, which results in a blank screen. There's clearly something wrong with how the process of compiling the application.
    Tried this:
    var Xpos:Number = 0;
    var Ypos:Number = 0;
    var loader:Loader = new Loader();
    var link:URLRequest = new URLRequest("Untitled-1.swf");
    loader.load(link);
    addChild(loader);
    And this:
    var ldr:Loader = new Loader();
    ldr.load(new URLRequest("Untitled-1.swf"));
    ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, loaded, false, 0, true);
    function loaded(event:Event):void {
    addChild(event.target.content);
    But nothing works. I'm still getting a blank screen. Is there any way to add the swf file manually into the descriptor file cause flash most likely messes it up? I don't really want to use through command line.

    Read this article, especially the bit about loadercontext and currentdomain:
    http://blogs.adobe.com/airodynamics/2012/11/09/packaging-and-loading-multiple-swfs-in-air- apps-on-ios/

  • ECC 6.0 FI Business

    I am looking for SAP standard business process flows for ECC 6.0. We are upgrading our installation and want to mimic our processes to match ECC 6.0 process flows. I have tried to get this information on Solution Composer but it does not have SAP delivered business process flows.
    Thanks,
    Ed

    Hi,
    I was wondering have you checked out https://websmp208.sap-ag.de/erp?  It's quite useful too.
    Hope this helps,
    cheers,
    Gimmo

Maybe you are looking for